Used Okuma Ma 600 Hb for sale (226)

Condition: excellent (used), Year of construction: 1996, Control: OSP 700M Bjdpfjyw Ui Iox Ab Uolf Travel X/Y/Z: 1050 x 560 x 450 mm Table size: 1300 x 560 mm Spindle speed: 6,000 rpm Tool magazine for 20 tools, BT 50 Chip conveyor Approx. 40 toolholders BT 50

Condition: used, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 700 mm, workpiece weight (max.): 800 kg, Horizontal Machining Center Okuma Millac 550 H (2-pallet system) For sale: high-performance horizontal machining center Okuma Millac 550 H with dual pallet system. Designed for efficient series production, offering high productivity, reduced downtime and full 4th-axis machining capability. Ideal for demanding machining operations requiring precision and repeatability. Technical specifications: Bljdpfx Abeyw Rlxo Uef Pallet size: 550 mm Travels: X: 800 mm Y: 800 mm Z: 700 mm A-axis: 360° Spindle taper: BT50 Max. spindle speed: 10,000 rpm Tool magazine: 60 tools Max. workpiece weight: 800 kg Machine in very good technical condition, ready for operation.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Blsdpoyvfhdjfx Ab Uof Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: used, functionality: fully functional, The machine has not been in operation for about one year. It is not connected to the power supply. The machine is available for inspection upon request. Bljdpfxsyy Upao Ab Ujf – CNC control: OSP 5000L-G CNC system (German language) – Data transmission: RS232 – Tool turret: 12-position BOLT ON type – Chuck: 250 mm – Spindle: 70-3800 rpm (11 kW, 30 min; 7.5 kW – continuous operation) – Non-through spindle – Spindle bore diameter: 75 mm (at a depth of 70 mm, measured from the face of the chuck and without jaws) – Spindle bore diameter: 28 mm (at a depth of 200 mm, measured from the face of the chuck and without jaws) – X axis travel: 400 x 0.001 mm – Z axis travel: 500 x 0.001 mm – XZ cutting speed: 0.01-1000 mm/rev – XZ feed rate: 12,000 mm/min – Power supply: 3 x 400V – Machine rated power: 21 kVA – Maximum load current: 36A – Machine dimensions (width x depth x height): 2.9 m (3.9 m with chip conveyor) x 1.8 m x 1.72 m – Machine weight: 4500 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 1,500 mm, turning diameter: 710 mm, Used Okuma Multus B400W Max. turning diameter Ø 710 mm Turning length 1500 mm Kuka robot 140 kg without handling attachment 2 spindles, 7 axes, loading conveyor - loading station - unloading station - 950 mm swing Bodpeyrf T Ssfx Ab Uslf 12+15" chuck 70 bar high-pressure pump

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Blsdpfx Abeyux S Ho Uof

Condition: excellent (used), Travels: X-axis: 155 mm Z-axis: 320 mm Swing diameter over bed: 450 mm Swing diameter over carriage (slide): 350 mm Maximum turning diameter: 270 mm Bjdpfxoyvy Ute Ab Ujlf Maximum turning length: 500 mm Spindle speed, infinitely variable: 75 – 3500 rpm Spindle motor: 7.5 kW Tool turret: 12 stations Dimensions (L x H x W): 2200 x 1635 x 1670 mm Weight: 3800 kg

Condition: ready for operation (used), Okuma LB25 Bjdpeyy Uptofx Ab Ujlf

Condition: good (used), Year of construction: 2007, Used OKUMA lathe - Model: LT200-M TwinStar Bljdpfsv S Svvox Ab Uof - Year: 2007 - including chip conveyor - coolant tank - immediately available

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA Blsdpfjv S Su Sjx Ab Uef - Model: LT 200-M TwinStar - Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2021, CNC Lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of manufacture: 2021 Internal machine no.: 15 Max. machining diameter: 390 mm Swing diameter over cross slide: 260 mm Max. turning length: 500 mm Bodpfx Aboyt E A Ne Uolf Travel paths: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 stations – all driven Spindle speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment: - Chip conveyor - Touch setter - One Touch IGF - Parts catcher - Reinforced coolant system 8 bar - Extraction unit

Condition: good (used), Year of construction: 1998, functionality: fully functional, Okuma MX 55, year of manufacture 1998, OSP - U 100 L control, travel X/Y/Z 1050/560/450 mm, rapid traverse X/Y/Z 40 m/min, max. table load 700 kg, table size 1300 x 560 mm, spindle speed up to 6,000 rpm, 20-position tool changer, BT 50 taper, through-spindle coolant 20 bar. Two years ago, the milling spindle was overhauled and the axis drives were renewed. Bsdpeyx Stmjfx Ab Ujlf

Condition: used, Year of construction: 1980, Machining center Bledpfx Ajyycv Iob Usf

Condition: good (used), Year of construction: 2015, FOR SALE: OKUMA MILLAC 852VII Vertical Machining Center (2015) Description: High-performance OKUMA CNC vertical machining center for sale, model MILLAC 852VII. Japanese-designed machine, renowned for its exceptional rigidity and surgical precision. Ideally suited for machining complex and heavy prismatic workpieces. Technical Specifications (Source: Manufacturer’s Plate): - Brand: OKUMA Corporation (Made in Japan) - Model: MILLAC 852VII - Year of manufacture: March 2015 (2015.03) Bljdpsyr Id Hjfx Ab Uef - Power supply: 380 V / 3 phase / 50 Hz - Rated power: 44.3 kVA (High-power spindle motor) - Compliance: CE Marked (Certified for the European market) Working Capacities (Standard for model 852VII): - Travels (X / Y / Z): 2,050 mm x 850 mm x 750 mm (Very large capacity) - Table dimensions: 2,200 mm x 850 mm - Maximum table load: 3,000 kg - Spindle speed: Up to 6,000 or 10,000 rpm (depending on configuration) - Spindle taper: BT 50 (High rigidity) - Automatic Tool Changer (ATC): 36 positions (or more, depending on configuration) - Machine weight: approx. 17,500 kg (Ultra-heavy-duty frame) Key features: - Recent machine (2015), still complies with current technology standards - Robust box ways for perfect surface finishes

Condition: excellent (used), Year of construction: 2017, Okuma SPACETURN LB3000EXII 4-axis CNC Lathe Year: 2017 8 driven tools Blodpfxsyxnxre Ab Usf Tailstock, chip conveyor The spindle is noisy and the lathe is out of alignment. Geometry needs to be redone.

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand OKUMA Model OSP-P200L Bodsx D Nf Iepfx Ab Uolf This Okuma LU300-M was manufactured in 2006. A robust horizontal turning machine featuring a spindle bore of 62mm and speeds up to 5000 RPM. It includes dual turrets with 12 and 8 positions respectively, enhancing its versatility. Equipped with a Mayfran chip conveyor and OSP-P200L control for efficient operation. Consider the opportunity to buy this Okuma LU300-M horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, OKUMA OSP-P300M control Table dimensions: 1300 x 560 mm Maximum table load: 900 kg X-axis travel: 1050 mm Y-axis travel: 560 mm Z-axis travel: 460 mm Spindle speed: 12,000 rpm SIM: SK50 Magazine capacity: 32 Power consumption: 22.2 kVA / 400V Total weight: 7700 kg Dimensions (L x W x H): 2900 x 2450 x 2900 mm Accessories and equipment: - Chip conveyor - Coolant system - Transformer - Some tool holders with drawbars - Spindle cooler - Lifting hook - Manuals The machine is being sold due to company closure. Bodpsyvr N Nofx Ab Ujlf

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Bledpfxswufc Ts Ab Uof Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, type of input current: three-phase, We are offering this ready-to-use Okuma LB15 CNC lathe, year of manufacture 1989. Noted defects: The seal on the Plexiglas door should be replaced over time. The machine is still in operation and can therefore be inspected and tested on site. Bedpfx Aboyw Hnie Uolf Manufacturer: Okuma Model: LB15 Year of manufacture: 1989 Mains voltage: 380 V Number of phases: 3 Rated power: 21 kVA Frequency: 50 Hz Total rated current: 36 A Maximum motor current: 28 A Breaking capacity: 7.5 kA Circuit diagram no.: W5000-118-068 Serial number: 5813 If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2014, Description: The machine is in good technical condition, with the possibility of a test run upon prior agreement. Maximum swing diameter: 480 mm (approximate to the current configuration of the parts pick-off gripper) Maximum machined diameter: 340 mm Maximum turning length: 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3 sets of soft jaws (Schunk KM-WBL 103), 1 set of hard jaws (Schunk SHB-J 100), hydraulic through cylinder SS 1770, draw tube Main spindle Spindle nose: JIS A2-6, bore diameter 80 mm, integrated motor Speed range: 45 - 5,000 rpm Power/Continuous operation: 22 kW / 15 kW Continuously controlled C-axis, 360° with 0.001° increment Sub spindle Speed range: 50 – 6,000 rpm Power/Continuous operation: 11 kW / 7.5 kW Spindle nose diameter: 140 mm, bore diameter 62 mm, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 sets of soft jaws (Schunk KM-WBL 62), hydraulic through cylinder SS1243, draw tube Sub spindle travel – NC W axis, stroke for W450: 595 mm Spring-loaded workpiece ejector from the sub spindle W-axis overload monitoring (drive torque) Center support (tailstock) clamping in the sub spindle Turret head Number of tool positions: 12, static and driven, BMT60 (not VDI) Tool clamping (internal): 25 x 25 mm Tool clamping (external): diameter 40 mm Driven tools Bodpfxsyycb Rs Ab Uslf Drive power: 7.1 / 4.1 kW Speed range: 45 – 6,000 rpm Rapid traverse speeds Rapid feed in X and Z axes: 25 / 30 m/min Rapid feed in C axis: 200 rpm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 5,000 rpm, travel distance Y-axis: 120 mm, spindle motor power: 22,000 W, number of axes: 4, This 4-axis Okuma LB 3000 EXII was manufactured in 2022. It features a spindle speed of 5,000 rpm and a spindle power of 22 kW. The machine includes a 12-position motorized turret and a Y-axis travel of 120 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 EXII horizontal turning machine we have for sale. Contact us for further details. • Control: OSP P 300LA • Spindle: ASA 6" nose (bore 80 mm, without drawbar); bar capacity 52 mm (Kitagawa SR1453 cylinder); electric spindle orientation • Axes: Y-axis travel 120 mm ; C-axis rotation 360° (0.001° increment) • Turret: 12-position radial, motorized; turret motor 6,000 rpm, 7.1 kW • Tailstock: CM5; 500 kgf thrust; rotating tip • Pedals: Separate for spindle and tailstock • High-pressure coolant pump: 0.8 kW; 6 bar; 20 l/min Bljdpfxsyq Ngmo Ab Ujf • Tool presetting: Manual • Programming: Conversational IGF

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Bsdpeyalp Njfx Ab Uslf Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, total height: 2,650 mm, total width: 1,800 mm, overall weight: 5,000 kg, spindle speed (max.): 7,000 rpm, spindle motor power: 11,000 W, tool weight: 8,000 g, number of axes: 3, This 3s Okuma MX-45VAE vertical machining centre was manufactured in 1999. It features a travel range of 560 mm on the X-axis, 460 mm on the Y-axis, and 450 mm on the Z-axis, providing versatile machining capabilities. With a tool magazine capacity of 20 tools and a maximum tool weight of 8 kg, it is well-equipped for various applications. Consider the opportunity to buy this Okuma MX-45VAE vertical machining centre. Contact us for further details. • Spindle end to table surface: 160–610 mm (6.30–24.02 in) • Table: • Working surface: 460 × 760 mm (18.11 × 29.92 in) [optional: 460 × 1000 mm (18.11 × 39.37 in)] • Table surface height from floor: 750 mm (29.53 in) • Load capacity: 3430 N (770 lbf) [optional: 4900 N (1100 lbf)] • Spindle: • Number of speeds: Infinitely variable • Taper: 7/24, NT40 • Front bearing diameter: 70 mm (2.76 in) • Feedrates: • Rapid (X/Y): 36 m/min (1417 ipm) • Rapid (Z): 30 m/min (1181 ipm) • Cutting feed (X/Y/Z): 10 m/min (394 ipm) • ATC: • Tool shank: MAS BT40 • Pull-stud: MAS 2 • Magazine capacity: 20 tools [optional: 32 or 48 tools] • Max tool diameter with adjacent tools: 90 mm (3.54 in) • Max tool diameter without adjacent tools: 125 mm (4.92 in) • Max tool length: 250 mm (9.84 in) • Tool selection: Memory random • Motors: • Main spindle drive: • 7.7/5.5 kW (10.27/7.5 hp), 30 min/continuous, for 50–1100 min⁻1 • 11/7.5 kW (15/10 hp), 10 min/continuous, for 1101–7000 min⁻1 • Feed motors: X/Y: 3.0 kW; Z: 4.0 kW Dimensions Machine Depth 2380 mm Bedpfx Abeyk Eyvj Uolf

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, overall weight: 6,200 kg, controller manufacturer: OKUMA, controller model: OSP P200-L, number of axes: 2, This 4-axis Okuma LB 3000 MY was manufactured in 2008. It features a 12-position turret with all driven tools, C-axis and Y-axis functionality, and a main spindle motor of 22 kW. The machine includes a hydraulic and programmable tailstock, a chuck size of 250 mm, and a bar capacity of 75 mm. If you are looking to get high-quality turning capabilities, consider the Okuma LB 3000 MY machine we have for sale. Contact us for more information. Additional equipment • Spindle oil chiller included • Side chip conveyor (hinged belt type) • Double foot pedal for chuck and tailstock control • Includes transformer, manuals, parts list, and schematics Machine Benefits Technical Machine Benefits • Torque: 620 nm • Spindle nose: a2-8 • Bar capacity: 75 mm • Chuck: 250 mm smw autoblok with quick jaw change • Swing diameter: 520 mm • Max turning diameter: 380 mm • Max turning length: 1050 mm • 12-position turret, all driven tools • Turret indexing time: 0. 2 seconds • Equipped with static and driven tool holders Extra Information Tools Automatic tool load monitoring Renishaw automatic tool measurement arm Bljdpfeyaiq Djx Ab Ujf Driven tools motor: 5.5 kW Driven tool speed: up to 4000 rpm Currently in operation

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 760 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 760 mm, total height: 2,864 mm, overall weight: 11,500 kg, spindle speed (max.): 15,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis Okuma MB 5000H was manufactured in 2010. It features a robust 500 × 500 mm pallet, capable of handling a maximum load of 500 kg, and offers a comprehensive range of movements with 760 mm travel in X, Y, and Z axes. Equipped with a high-speed spindle up to 15,000 min⁻¹ and a 64-tool magazine, this horizontal machining centre is ideal for complex machining tasks. Contact us for more information about this machine. • Spindle center to pallet top: 50–810 mm • Spindle nose to pallet center: 135–895 mm Bodsx D Rrcjpfx Ab Uolf • Table/pallet: 500 × 500 mm; max load 500 kg; indexing 1° • Workpiece capacity: max Ø800 × 1,000 mm • cutting feed 1–60,000 mm/min; table indexing motor 3.0 kW • Tooling: tool shank MAS403/BT40; pull stud MAS 2; magazine 64 tools; random selection • floor space 2,700 × 4,710 mm Additional equipment • Chip conveyor • Through-spindle coolant (CTS) • Tool presetting at table edge • Provision for Renishaw probe • Shower/washdown system