Used Pass Boat for sale (1,114)

Condition: used, Year of construction: 2002, 2002 Friulmac DUALFEED Cutter - Loader for hydraulic, automatic shearer, with electronic size adjustment. The Dualfeed machine consists of two heads connected by a welded steel frame, on which two support shafts for pallets are fixed. One of the support pallets is fixed while the other is movable to allow opening of the head placed on the action of the hydraulic fluid and centraining Dwsdpfozxg Ddox Ai Eed On the pallets they find space at the entrance, the parts warehouse for automatic loading handling hydraulics. pieces to be machined, then the workpiece feed system, the work groups and the press group, finally at the output, the hauling group assigned to the entry of pieces to the scorniciatrice. The purpose of the machine is to continuously feed the chipping machine with pieces cut to the required size of the woodworking material, as specified in the technical specification. The operating cycle takes place in two distinct phases: - in the first phase the piece is automatically retrieved from the warehouse where the operator previously performed the loading operation and the transit is passed through two sawing blades that cut it to the adjusted length. - In the second phase the piece header is always automatically moved to the pre-feeder of the scorner where two dedicated feed rollers insert it into the - just shearer. The loading speed automatically adjusts to the pull speed of the palm framer and the machine operation stops automatically if for any reason the palm framer's pull stops. The piece advancement is performed by pushers mounted on a movable bar that has an alternating (forward-backward) movement. At the end of the work cycle the piece exits the machine with the same pusher system and is deposited on the stripper conveyor bed where two feed rollers insert it into the stripping machine. The alternating motion of the mobile bar that carries the pushers is hydraulically obtained from a rotary actuator and the two traction rollers are driven by a hydraulic motor. Minimum piece length: mm. 260 Maximum piece length: mm. 1300 Minimum piece width: mm. 40 Maximum piece width: mm. 110 Minimum thickness: mm. 10 Maximum thickness: mm. 80

Condition: excellent (used), machine/vehicle number: 8FBE20T-18877, operating hours: 443 h, lifting height: 5,500 mm, free lift: 1,490 mm, fuel type: electric, mast type: triplex, battery capacity: 630 Ah, fork length: 1,200 mm, Year of manufacture: 2022 Lifting capacity: 2.000 kg Maximum passing height: 248 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = Djdpfx Ajzihy Ioi Eowd - Free lift

Condition: excellent (used), machine/vehicle number: 6970263, operating hours: 927 h, lifting height: 210 mm, fuel type: electric, battery capacity: 50 Ah, battery voltage: 24 V, fork length: 1,200 mm, Year of manufacture: 2023 Dedpszih Hnefx Ai Eewd Battery: 50 Ah, 24 V, Year of manufacture 2023 Lifting capacity: 1.600 kg Maximum passing height: 123,5 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information

Condition: excellent (used), machine/vehicle number: 6970733, operating hours: 923 h, lifting height: 210 mm, fuel type: electric, battery capacity: 50 Ah, battery voltage: 24 V, fork length: 1,200 mm, Year of manufacture: 2023 Battery: 50 Ah, 24 V, Year of manufacture 2023 Lifting capacity: 1.600 kg Dwjdpfxszih Hus Ai Eod Maximum passing height: 123,5 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information

Condition: excellent (used), machine/vehicle number: 7012752, operating hours: 231 h, lifting height: 4,500 mm, free lift: 1,700 mm, fuel type: electric, mast type: triplex, battery capacity: 225 Ah, fork length: 1,150 mm, Year of manufacture: 2023 Maximum passing height: 212 cm Technical condition: very good Dodpfxjzih Nio Ai Eewd Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: excellent (used), machine/vehicle number: 6829923, operating hours: 669 h, lifting height: 4,460 mm, free lift: 1,660 mm, fuel type: electric, mast type: triplex, battery capacity: 225 Ah, fork length: 1,150 mm, Year of manufacture: 2021 Lifting capacity: 1.400 kg Maximum passing height: 212 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information Dedpszih Rmsfx Ai Eewd = Additional options and accessories = - Free lift

Condition: used, Year of construction: 2016, with a new conveyor belt. Functional Description(Source: Excerpt from the operating instructions) This 3D UV dryer is equipped with 2 UV lamps from aboveand 1 UV lamp from below, each with a power outputof 150 W per cm of lamp length (electrode spacing).The UV output can be adjusted from 50–100%.The output of the bottom lamp can be adjusted drying tunnel features automatic conveyor conveyor speed is continuously adjustable (1–20 m/min).The automatic material detection (which can be turned on or off) causesthe UV output to switch to standby mode (≥15% UV output)if no material passes the sensor for more than one minute. Djdpfxezf N Rgo Ai Eswd Technical Specifications: - Manufacturer: Printworld- Model: 3D - PUVD- Lamp output: 150 W/cm- Year of manufacture: 2016- Working width: max. 1,300 mm- Number of lamps:2 lamps from above1 lamp from below- UV power control:UV lamps are individually adjustable (50%–100%)- Reflector: Printworld Multifocal reflector- Conveyor belt transport width: 1,400 mm- Total length: 4.5 m- Conveyor belt speed: 1–20 m/min- Max. part height: max. 60 mm- Conveyor belt type:PTFE glass fiber fabric conveyor belt- Conveyor speed control:Infinitely variable with digital control and monitoring- Conveyor drive: Stepper motor with variable conveyorspeed and digital control and monitoring- Energy savings: Automatic standby modewith power reduction of approx. 10%- Operation/control: Schneider Modicon M258 LogicController processor with Magelis color touchscreen- Infeed height: 850 – 900 mm- Outfeed height: 850 – 900 mm- Electrical connection: 400 V~, 50 Hz, 3-phase +N +PE- Current: 135 A- Location: from stock

Condition: used, functionality: fully functional, The SP50L is a high-quality, flexible solar panel with a power output of 51 watts. Thanks to its advanced Back Contact cell technology, the panel achieves an efficiency of over 23%, ensuring high energy generation even under less than ideal lighting conditions. Its ultra-lightweight and thin design makes the panel particularly suitable for applications on boats, campers, and other surfaces with slight curves. Weighing only approximately 0.8 kg and measuring 1109 × 292 × 2 mm, the SP50L combines durability, flexibility, and excellent performance in a compact solution for sustainable energy generation. Dwedpjzbrywofx Ai Esd

Condition: new, Now available: Bobcat MT120 – Top features & like new condition We are pleased to offer you the Bobcat MT120 with excellent special equipment. Condition: New Availability: Immediately in stock. Why Zirndorfer-Maschinenpark? Official dealer for Bobcat & Montabert * Family-owned business with over 45 years of experience * In-house workshop for guaranteed quality * Wide selection of new and used machines Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Trade in your used machine? We will gladly accept your machine in part exchange at fair conditions. Attachments and accessories? We will be happy to offer additional attachments and suitable accessories on request. Sale to EU or non-EU countries? We will take care of the entire process for you. Special equipment of the machine: Reversible milling cutter / stone milling cutter. Dwedpfjz N E S Hsx Ai Eod Standard equipment of the machine: * Double-acting auxiliary hydraulics * CE certification * Warranty: 24 months or 2,000 operating hours (whichever comes first) Trust in experience passed down through three generations. Zirndorfer-Maschinenpark e.?K. – Your partner for construction machinery. Contact us now and secure your individual offer. Legal notice: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Condition: excellent (used), Year of construction: 2002, Nissan Reach Electric Forklift 3 Stage Mast Dwsdpfxohupkue Ai Eed Max lift height 8 metres Max load at full height 1200kg Serviced regularly, battery replaced 2015 18,884 hours on the clock Passed insurance inspection a few weeks ago In excellent condition Currently under a service contract Service provider will give a full report on this truck Used in a medical pharmaceutical plant

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 13,501 h, load capacity: 1,600 kg, lifting height: 4,625 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, Equipment: UVV, lighting, sideshift, Triplex mast with full free lift, overall height: 2150 mm, lift height: 4625 mm, integrated side shifter, fork length: 1200 mm, LED work lights front and rear, blue warning light, manual single-pedal transmission, 48V/625Ah battery from 2018, SE tires, operating manual included. Technical condition at the time of sale: Forklift has been technically overhauled! Major service newly performed! (Timing belt and water pump also replaced) UVV inspection passed without any defects! Forklift newly painted! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: By appointment at any time during opening hours: Monday to Friday. From 8:00 a.m. to 6:00 p.m. Saturday from 8:00 a.m. to 1:00 p.m. TRANSPORT: Dodetvw Rhjpfx Ai Ejwd Low-loader or covered truck available at a reasonable price.

Condition: used, machine/vehicle number: 005639, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 50 m/min Djdpovw Evgsfx Ai Eewd Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Cutting table Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Dwedpez Eh Eaefx Ai Eed Original new price: €86,708.58

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Dwsdpfx Aisz Ru Ere Esd Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, axle configuration: 2 axles, loading space length: 73,800 mm, loading space width: 25,000 mm, loading space height: 22,500 mm, total length: 99,300 mm, total width: 26,000 mm, total height: 36,300 mm, Equipment: ABS, = Additional options and accessories = Dodpfxo Ahd Nae Ai Eewd - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front - Disc brake system = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Schmitz Cargobull SCB∗C2 ZKO18/L7.35 FP45 Cool refrigerated box + tail lift Refrigeration: Carrier Supra 900U, tail lift: BÄR BC 2000 S4-C4 (2,000 kg), pass-through rear door, additional headlights: on the left and right sides, at the rear of the vehicle, air suspension, trailer coupling: 50 mm drawbar, Duomatic, SAF axles, Wabco ABS, spring brake, disc brake, temperature recorder, extendable drawbar, permissible total weight: 18,000 kg, unladen weight: 6,550 kg, payload: 11,450 kg, load compartment dimensions: L 7,380 mm, W 2,500 mm, H 2,250 mm, tire tread depth: 1st axle 4-8 mm, 2nd axle 5 mm Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved!!! = Further information = Year of manufacture: 2020 Unladen weight: 6,550 kg Payload: 11,450 kg GVW: 18,000 kg Last inspection: 2026-11 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, This Kärcher KM 105/110 R Bp package, manufactured in 2023, has only accumulated 119 operating hours to date. The patented sweeping brush side broom enables corner cleaning in a single pass. For easy emptying of the coarse dirt container, the machine features a hydraulic high-dump system, which can be fully operated from the driver's seat. The Teach system automatically adjusts the main sweeping roller as it wears, guaranteeing consistently excellent sweeping results. Dodpfe Ahhkkex Ai Eewd Three different contact pressures can be selected, depending on the surface and type of dirt. Thanks to the position of the main sweeping roller between the rear wheels, higher obstacles can be traversed without damaging the sweeping system. The patented, fully automatic Tact filter cleaning system ensures dust-free operation at all times. Technical data: Maximum area performance: 6300 m²/h Working width: 640 mm Working width with 1 side broom: 1050 mm Sweeping debris container: 110 l

Condition: good (used), operating hours: 479 h, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, General information Year of manufacture: 2021 Weights Empty weight: 5.015 kg Functional Lifting capacity: 3.500 kg Maximum passing height: 233 cm Number of valves: 3 CE mark: yes Maintenance, history and condition Dwjdpfx Aioygciye Ejd Number of owners: 1 Technical condition: good Visual appearance: good Other information Remanufactured: Yes Additional information Please contact Tobias Mayr for more information = Additional options and accessories = - 3rd valve - 4th valve

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Dedpsi Akrkofx Ai Eewd Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment)

Condition: new, Year of construction: 2025, functionality: fully functional, Brinox BWS707 Pharma Parts Washing Systems – new, unused, in original packaging – year of manufacture 2025 NEW PRICE in 2025: 681,988.64 euros for both systems Manufacturer: Brinox Model: BWS707 / BWS707 SRL Year of Manufacture: 2025 Condition: New, unused, and in original packaging Quantity: 2 systems Price: upon request For sale are two new, unused, and original-packaged Brinox pharma washing systems from the BWS707 series. The systems are no longer needed and are therefore being offered for sale. The single-chamber washing systems are used for cleaning, rinsing, and drying pharmaceutical production parts and accessories. The pass-through design with separate loading and unloading sides enables integration between different production and cleanroom areas. Cleaning is carried out via rotating spray arms as well as a connection for internal cleaning of suitable washing baskets. Technical equipment according to project documentation: Washing chamber approx. 700 × 700 × 800 mm, width × height × depth Two vertically moving doors with separate loading and unloading sides Rotating spray arms at the top and bottom Connection for internal cleaning via suitable washing baskets Media connections for WFI, purified endotoxin-free water, diluted sodium hydroxide, and nitric acid Compressed air connection Drying with heated, HEPA-filtered air Conductivity monitoring during the rinsing processes Siemens PLC CPU 1515 Siemens MTP1500 Unified Comfort Panel Dwedj Afbnzepfx Ai Eod SCADA system with Siemens IPC627E and GE iFIX 2022 Recipe management and electronic process reports Audit trail and electronic signature functions Electrical connection: 400 V, 3NPE, 50 Hz System identification: System 1: BWS707 SRL, serial number 1008373 System 2: BWS707, serial number 1008374 Documentation: Technical documents, functional descriptions, operating manuals, installation plan, and photos are available. An EU declaration of conformity is available for System 1. Scope of delivery: The specific scope of delivery, including washing baskets, transport carts, control computers, and software licenses, will be specified in the offer. The type of heating and system-specific connection data will be confirmed before the contract is concluded. We will gladly provide you with further information, technical documents, and photos upon request.

Condition: used, machine/vehicle number: 434, empty load weight: 5,810 kg, maximum load weight: 12,190 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2010, loading space length: 7,650 mm, loading space width: 2,470 mm, loading space height: 2,800 mm, loading space volume: 53 m³, suspension: air, tire size: 385/55 r22,5, wheelbase: 1,480 mm, color: white, Equipment: ABS, * EBS * Disc brake * Side doors, left * Pass-through capability * DC axles * Lifting and lowering mechanism Errors and omissions excepted. Dwodpelu D Nbsfx Ai Ejd

Condition: excellent (used), machine/vehicle number: 8FBMT35-13035, operating hours: 3,486 h, lifting height: 5,000 mm, free lift: 1,900 mm, fuel type: electric, mast type: triplex, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2019 Lifting capacity: 3.500 kg Maximum passing height: 258,5 cm Technical condition: very good Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = Dwsdozih A Ajpfx Ai Eed - Free lift

Condition: excellent (used), machine/vehicle number: 6588228, operating hours: 3,345 h, lifting height: 4,800 mm, free lift: 1,690 mm, fuel type: electric, mast type: triplex, battery capacity: 375 Ah, fork length: 1,150 mm, Year of manufacture: 2018 Maximum passing height: 218 cm Technical condition: very good Dodpozih Iljfx Ai Eowd Visual appearance: very good Reconditioned: Yes Please contact Karl Leitner for more information = Additional options and accessories = - Free lift

Condition: excellent (used), Year of construction: 2011, HOMAG POWER KFL 610 – complete edge banding line for batch size 1 production, year of manufacture 2011 Automated format and edge processing with laserTec, 24-position edge magazine, two BARGSTEDT portals, and automatic return system. For furniture and interior design manufacturers with varying workpiece and edge material requirements. THE BENEFITS OF THE LINE • Four-sided processing in four passes with automatic return and workpiece rotation • Barcode identification, flexible edge sequence, and setup during idle time • laserTec 3 kW for suitable functional edges; alternatively, EVA/PU adhesive processing after manual conversion • Automatic vacuum loading, conveying technology, and chain lift storage with 20 levels EQUIPMENT HOMAG POWER KFL 610/22/PU/L/25 with SI14 infeed. 2 × BARGSTEDT PROFI TBP410/40/28/12/S. 24-position roller magazine A3. RF12 format processing, joining, capping, FK23 profile milling with 2 × 8-position tool changer, multi-profile cutting tool, and finishing unit. powerControl PC22, woodLine PC52, woodScout, and barcode system. TECHNICAL DATA Base machine: workpiece length 240–2,500 mm, width 200–1,200 mm, thickness 10–60 mm. Portals: maximum 2,800 × 1,200 × 40 mm, maximum 50 kg. Laser: workpiece thickness maximum 40 mm, edge thickness maximum 3 mm. Feed rate of base machine 15–30 m/min, depending on processing and units. The 60 mm limit does not apply to the entire line. Format limits depend on orientation and processing; no blanket guarantee of overall line performance. INSPECTION AND DOCUMENTS The system was confirmed to be fully operational on 08.10.2026. Inspection with demonstration possible at the customer's location by appointment. Location: Switzerland. Technical description, layout, photos, and operating videos are available. Djdpfezt N Egex Ai Eewd Please provide your workpiece formats, edge materials, and available installation space so that we can arrange a suitable demonstration. Price on request. Scope of supply, current availability, disassembly, loading, and transport will be agreed upon in the individual offer. Internal reference: KL-0-26-002. Technical specifications based on available documents; errors and prior sale excepted.

Condition: used, Year of construction: 2005, Technical details: max. turning diameter: 320 mm turning length: 1040 mm control: OSP E 100 L Onetouch IGF-M-D greates pass round over bed: 530 mm standard turning dia.: 350 Max. distance between centres: 1200 mm max. workpiecediameter: 525 mm Traverse X-Axis 1: 500 Traverse X-Axis 2: 350 mm Traverse Y-Axis 1: 160 (+80/-80) mm Traverse Z-Axis 1: 1200 mm Traverse Z-Axis 2: 1200 mm Spindle 1 Power: 22 kW Spindle 1 RPM: 3800 1/min spindle nose: JIS A2-8 spindle bore: 80 mm bar material dia.: 65 mm C-Axis: 0,001° Number of Turrets: 2 Turret No.1 stations / rotary tools: 12/12 Turret 1 tool RPM: 4500 1/min Turret No.2 stations / rotary tools: 12/12 rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 25 m/min total power requirement: 33 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 6,0 x 2,5x 2,3 m High pressure coolant system: INterlit 8/20 bar Accerories Chip conveyor part counter total counter tool setting Signal lamp 3 colors spindle load monitor B Spindle 1 Chuck SMW 300 mm Dwedpjz Ig Swjfx Ai Eod Soper solid CNC Turning-and Milling Center The Okuma LT 300 MY has 2 turrets, the upper turret has Y-axis with milling function, the lower turret has milling function. It has main- and subspindle. This allows synchronized machining using 2 turrets with a maximum of 24 positions for rotary toolholders. A comprehensive package of toolholders comes with the machine. An Interlit paperfilter/high pressuire system with the machine with coolant cooler. There are 5 identical machines available, all in very good and well maintained condition. *

Condition: used, mileage: 125,885 km, power: 90 kW (122.37 HP), first registration: 02/2018, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, color: other, gearing type: mechanical, number of gears: 6, emission class: euro6, total length: 5,350 mm, total width: 1,850 mm, total height: 1,900 mm, Car-Pass URL: Car-Pass ID: be413238-e071-4281-b672-5de5650dee06 = Further information = Year of manufacture: 2018 Unladen weight: 1,629 kg Payload: 1,471 kg GVWR: 3,100 kg Dedpfx Aiezgk Hxo Eswd Damage: none