Used Pass Boat for sale (1,116)

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!) Hodpfxoxpn Tne Afgew

Condition: used, Year of construction: 2007, turning diameter max. 356 mm turning length 705 mm control MSX 850 III MAPPS Mitsubishi greates pass round over bed 923,8 mm Swing dia. over traverse guideway 755 mm standard turning dia. 275 mm max. spindle speed 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bearing diameter 140 mm spindle bore 91 mm max. bar capacity 80 mm chucking diameter 305 mm C-Axis 0,001 ° Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle nose JIS A2-5 spindle bearing diameter 85 mm spindle bore 43 mm chucking diameter 210 mm C-Axis 0,001 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Shank diameter 26 mm Drill shank diameter 50 mm Spindle speed - driven tool stations max. 6.000 min -1 turret change time 0,25 sec. x-axis 260 mm z-axis 795 mm b-axis 734 mm feed speeds max. 30.000 mm/min rapid traverse X/Z/B: 30 m/min rapid traverse C: 400 min/-1 total power requirement 39 kVA weight of the machine ca. 6,0 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC - Turning- and MillingCenter MORI SEIKI - NL 2500 SMC / 700 - Tool-Drive - C-Axis - Subspindle - WITHOUT extraction system Hjdpfx Ajzb N Uxefgsw

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Hsdpovxrynofx Afgsw Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 2002, turning diameter 390 mm turning length 507 mm control MSG 805 MAPPS max. turning diameter 390 mm greates pass round over bed 680 mm Swing dia. over traverse guideway 510 mm centre distance 618 mm turning speed range - main spindle 45 - 4.500 min/-1 power capacity - main spindel 11 / 7,5 kW spindle bearing diameter 110 mm spindle bore 73 mm max. bar capacity 51 mm spindle nose JIS A2-6 chucking diameter 210 mm C-Axis 0,001 ° x-axis 235 (195+40) mm z-axis 520 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tool stations max. 3.000 min -1 power capacity driven tool-stations 5,9 / 4,5 kW Shank height for square tool 25 mm Drill shank diameter max. 50 mm turret change time 0,2 sec. tailstock adjustment 490 mm dia. of quill 85 mm taper of center MT 4 quill stroke 120 mm rapid traverse X: 18 / Z: 24 m/min Tipp feed 0 - 1.260 mm/min total power requirement 30,1 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,0 x 2,5 x 2,5 m CNC - Turning- and Millingcenter Hjdpsvzhiqofx Afgjw MORI SEIKI - SL 204 MC

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: Hsdpfx Afsgwct Dogjw • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Year of construction: 2006, condition: refurbished (used), machine/vehicle number: classic 600, FOR SALE – FRIGOSCANDIA CLASSIC 600 SPIRAL FREEZER Manufacturer: Frigoscandia Model: Classic 600 Equipment type: Industrial Spiral Freezer Belt width: 600 mm nominal Application: Industrial food processing and continuous product freezing Equipment Description Available for sale is a Frigoscandia Classic 600 industrial spiral freezer, designed for high-volume continuous freezing of food products in commercial and industrial food-processing facilities. The machine features a multi-tier spiral conveyor system that allows products to pass through a temperature-controlled freezing enclosure, providing efficient product handling and making effective use of available factory floor space. The Frigoscandia Classic range is suitable for a variety of food-processing applications, including meat, poultry, fish, bakery products and prepared foods, subject to the machine's original configuration. The equipment may include the spiral conveyor belt, drive assembly, motors, gearboxes, evaporator, circulation fans, insulated enclosure, electrical controls and product transfer interfaces. The precise specification and completeness are to be confirmed. Sale Information - Manufacturer: Frigoscandia - Model: Classic 600 - Condition: To be confirmed - Operational status: To be confirmed Hodoz Nzm Hspfx Afgow - Year of manufacture: To be confirmed - Location: Available on request - Price: Offers invited Inspection can be arranged by appointment, subject to availability and site access requirements. Interested buyers are invited to enquire for further technical information, photographs, dimensions and pricing.

Condition: used, functionality: fully functional, machine/vehicle number: FN 67xxxx, Year of construction: 2022, operating hours: 6,030 h, load capacity: 1,500 kg, lifting height: 5,500 mm, free lift: 1,825 mm, fuel type: electric, mast type: triplex, construction height: 2,415 mm, fork length: 1,150 mm, empty load weight: 3,206 kg, total length: 1,779 mm, drive type: Elektro, construction width: 1,060 mm, Electric 3-wheel forklift Chassis number: FN 67xxxx Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Hsdpfx Aszqhilofgow Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire size: SE 18x7-8 Rear tire type: Superelastic Rear tire size: SE 140/55-9 Battery voltage: 48V Battery Ah: 500Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2022 Description: serviced, technically and visually refurbished, safety inspection passed, sold as is/no warranty for defects Side shifter, integrated 3rd valve, rear work light, front work light, impulse control, full free lift, CE certificate, Floor spot light front and rear, Solo-Pilot, panoramic mirror, battery (04/2022) with Aquamatik, external charger included

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, Equipment: ABS, ferroSTAR 55 cbm Chassis material: Steel Chassis type: Z-chassis King pin load (national) (t): 12 Axle load (national) (t): 8 Axle track (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Loading width (mm): 2325 Internal height at the front (mm) (IHF): 2,285 Internal height at the rear (mm) (IHB): 2,285 Loading length (mm): 10149 KC-Value: 0650 Overall width (mm): 2550 Volume (m³): 55.00 Wheelbase (mm) (WB): 6,600 Overall length (mm): 11,501 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: First axle with lift axle and starting assist Activation of starting assist via button in the truck (mounting of the button is not included in the scope of supply) and by pressing the brake pedal three times Option 3: Third axle with lift axle Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, and switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side, in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side, in the direction of travel Support legs: JOST MODUL type Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo Rear lights: 2 LED reversing lights, mounted at the rear, on the left and right, on the lamp carrier Position: Work lights (operated via switch) 2 LED reversing lights at the front, on the left and right, in the area of the support legs Underbody protection: Manual operation Splash guards: Underbody protection, black with STAS logo Tilting cylinder: Hyva (STAS manufacturer's choice) Tilting cylinder type: Cylinder with small casing Cylinder tilting angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Tilting cylinder stroke: 7130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Fenders: Domar STAS with white stripe Splash guards: Fender, Clear Pass Toolbox: On the left side, in front of the axles Aluminum extension ladder with a length of 2.8 m, mounted on the right side Position: Broom and shovel holder with 3 holders each, mounted on the chassis on the left side Load pressure gauge: Ø 100 mm - mounted at the front of the chassis Two plastic wheel chocks Locking device: Chassis - superstructure, rubber bumpers Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached under the floor crossbeams Rear wall type: Swing doors Hjdpfx Ajzdw Ttjfgow Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall: 3 pairs of door hinges Design: Swing door, divided 1/2 to 1/2, with 1 piece of latch Opening of the door leaves: Right first opening Fastening of the open door leaves: Via chain Sealing: Rear wall with rubber sealing in the lower area, extending 1,000 mm to the side Additional locking: Rear wall, pneumatic

Condition: used, Metal detector with conveyor and reject bin Hsdpfx Afjz Nc Udjgew This Goring Kerr metal detector (later part of Thermo) checks products for metal particles as they pass through the detector head on the belt. Products found to contain metal are rejected from the belt into the stainless steel reject bin. Belt and detector share a frame on castors, with their own control box for start, stop and emergency stop. We have not been able to confirm the model or year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Metal detector with conveyor Reject: Reject bin beside the belt Belt: Blue plastic belt Controls: Own control box with start, stop and emergency stop Construction: Stainless steel, frame on castors

Condition: used, mileage: 32 km, power: 125 kW (169.95 HP), first registration: 10/2026, fuel type: diesel, overall weight: 3,225 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,450 mm, total width: 2,275 mm, total height: 1,999 mm, loading space length: 3,002 mm, loading space width: 1,777 mm, loading space height: 1,433 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal number: 4398.NW25.SD23044 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT Hjdeznrc Rspfx Afgow * Towing hitch, fixed * Roof rack - integrated and foldable * Fuel tank 70 l * Load compartment protection package: Side paneling, high - Load compartment floor, vinyl "Easy Clean" - Load compartment lighting (LED), extra bright * LED headlights - LED high beam - LED low beam - LED daytime running lights including integrated LED turn signals in front - Cornering lights, static - High beam assistant * Heated steering wheel * Sliding door, right and left * Seat package 17A: Driver's seat, 8-way manually adjustable (Ford ergonomic seat) - Front passenger double seat with pass-through, fixed - Seat heating for driver and front passenger (outer seat) - Tray on the front passenger seat (foldable) - Driver's seat with adjustable armrests inside and outside - Lumbar support for driver, 4-way adjustable - Airbag, passenger side - Side airbags, right and left - Head-shoulder airbags, front, right and left - Fabric upholstery Plus Style, seat center panel in Black Onyx, rest in Ebony * Auxiliary heater (fuel-fired water heater) with remote control including H7 AGM double battery * Technology package 5: Exterior mirrors, electrically adjustable, heated and foldable - Audio system with 13-inch multifunction display, Ford SYNC 4 including navigation - Blind Spot Information System including CTA rear cross-traffic alert - Pre-Collision Assist, camera and radar-based - Driver fatigue alert - Lane Keeping Assist, lane departure warning and lane change assistant - Lane Keeping Assist - Traffic sign recognition - Wrong-way driver warning function - Park pilot system front/rear - Speed control system, adaptive including Stop&Go function - Intelligent speed limiter with speed limit display - Rear view camera - Steering wheel, Sensico in leather-look FURTHER EQUIPMENT * 2-stage unlocking for passenger compartment and load compartment * Airbag driver side * Anti-lock braking system with electronic brake-force distribution * Overhead console * Double-wing tailgate (without window), unlockable from 90° to 168 degrees * ESP - Hill start assist - Safety brake assist - Traction control * Power windows front, electric - with quick-down/up function for driver side * Parking brake, electronic * Ford Power Start function * Windshield, heated * Grab handle, driver and passenger side * Glove compartment with lid * Interior lighting front * Automatic climate control * Headrests front * Load compartment lighting (LED) * Steering wheel made of plastic * Center console, small * Emergency call assistant eCall emergency call system * Particle filter: Diesel particulate filter * Radio accessories: 4 speakers * Wheel covers, full size * Tire repair kit * Tire pressure monitoring system * Wheels: Steel wheels 6.5 J x 16 with 215/65 R 16 tires * Gearshift lever on the steering column * Windshield wipers with rain sensor * Headlights with LED low beam - including high beam assist * Rear mud flaps * Front mud flaps * Power steering * Seat belts - Seat belt pretensioners and force limiters front - Driver's seat belt not fastened warning system * Start-Stop system * Partition (metal) without window * Recirculation heating * Lashing eyes 8 * Immobilizer * Heat-insulating glazing, light tint, complete * Central locking with remote control - also with second key, with remote control ... and more.----1st owner. German version. Errors and prior sale excepted. 2 years factory warranty from first

Condition: excellent (used), Year of construction: 2023, OCE Canon Colorado 1630 upgraded to 1650 The Canon Colorado 1650 is a 64-inch industrial production roll-to-roll printer designed for high-volume sign, graphics, and wallcovering production. Built on Canon's UVgel technology, it balances fast print speeds with flexible ink formulation and automated media handling. Year: 2023 Colours configuration: 2 x CMYK Mileage: 14.000m² ONLY!!! Upgrade: Hodjz A A A Uopfx Afgjw FLXfinish+ Option: While the 1630 can be upgraded to support basic matte/gloss finishes, the 1650 fully utilizes the FLXfinish+ system. This allows you to print a combination of matte and gloss finishes simultaneously in a single pass, without changing inks, changing varnish, or swapping media. Double-Sided Printing: Offers fully integrated support for seamless, automated double-sided printing (useful for indoor/outdoor blockout banners). Dual-Roll Feed: Unlocks automated roll-feeding and automated switching across 2 active media rolls smoothly, whereas the base 1630 comes standard with a single-roll configuration. For further technical details please refer to attached brochure. Printing & TechnologyPrinting Method: UVgel piezoelectric inkjet.Printheads: 8 x UVgel 415 printheads (2 independent printheads per CMYK color channel).Resolution: Up to 1,800 dpi print resolution.Nozzle Control: Integrated PAINT (Piezo Acoustic Integrated Nozzle Technology) which sends acoustic pulses to constantly monitor, diagnose, and recover clogged nozzles automatically on the fly.

Condition: used, Year of construction: 2007, Overview This Krones Variojet is a rotary rinser for glass bottles, built in 2007 and still running in production at a large brewery. The bottles are held in grippers on the carousel and pass three treatment stages before filling: rinsing with water, blowing out with air and gravity drainage. The machine runs at up to 48,000 bottles per hour; this output was achieved in production on the 330, 400 and 500 ml formats, while on the larger formats the filler set the line speed. It has been run on 330, 400, 500, 580 and 650 ml glass bottles, and the change parts for these formats are included. The rinser is fully enclosed by transparent safety doors and is operated from a Krones iPanel. The universal format parts visible in the video are not included in the offer. Technical data - Manufacturer: Krones - Model: Variojet Hedpfx Ajz Hai Tsfgjw - Year of manufacture: 2007 - Machine type: rotary rinser for glass bottles - Output: up to 48,000 bottles per hour - Bottle formats: 330, 400, 500, 580 and 650 ml glass - Rinsing positions: 110 - Treatment stages: water rinsing, air blowing, gravity drainage - Control: Siemens S7-300 PLC, Krones iPanel (B&R) with zenon V6.20 - Electrical supply: 400/230 V, 50 Hz, 3/N/PE, full-load current 18 A - Operating hours: 44,485 h - Dimensions: approx. 4.5 m across the carousel including the safety guarding Equipment - Rinser with carousel, bottle grippers and transparent safety doors - Front table with infeed screw and starwheels - Control panel with Krones iPanel - Water and air supply manifold - Domnick Hunter compressed-air dryer - Change parts for 330, 400, 500, 580 and 650 ml bottles - Water drip trays Condition Used, in good condition with no known defects. The machine is still installed and in production and can be inspected in operation by arrangement. Maintenance: the drive train is overhauled every two years (last in 2025), the rinsing nozzle system every two years (last in January 2026) and the water and air distributor every two years (last in 2024); suspension and format components are inspected monthly and repaired as needed. Availability Available from late February / March 2027, after removal from the production line. Location: Poland.

Year of construction: 2026, condition: new, The VOGEL V540E is a high-performance, automated paper cushioning machine and one of the most efficient paper void fill systems in its class. It processes wide paper rolls up to 500 mm and produces high-quality, three-dimensionally structured paper cushions (“paper bubble cushions”) with outstanding cushioning properties. Ideal for professional packing stations, logistics centers, and larger e-commerce operations seeking an ecologically sustainable, high-performance, and cost-effective alternative to conventional bubble wrap. With automatic length control and an optional winding mode, the V540E is capable of producing both loose cushioning pads as well as complete cushioning rolls for storage or further processing. Advantages: - The VOGEL V540E is a high-performance, automated paper cushioning machine and among the most efficient paper filling systems in its category. - It processes wide paper rolls up to 500 mm and produces premium, three-dimensional structured paper cushions (“paper bubble cushions”) with excellent shock-absorbing properties. - Perfect for professional packing areas, logistics centers, and large e-commerce frameworks requiring an environmentally friendly, high-capacity, and cost-effective solution to traditional bubble wrap. Hjdez E Iy Ropfx Afgow - Thanks to automatic length control and optional winding mode, the V540E can manufacture both loose cushion pieces and full-length cushion rolls for storage or further processing. Special Features: - Easy operation - Excellent price-performance ratio - Optional winding station / automated cushion roll production - Optimal replacement for bubble wrap - 100% recycled paper Our Service for a Strong Partnership: - Free technical hotline - Long-term spare parts availability - 99% of spare parts available within 24/48 hours - We supply the right consumables for your application! About us: Since the early 1980s, we have accumulated practical expertise in handling packaging machinery. This makes us true experts – not just in the machines themselves, but also in their functionality, strengths and weaknesses, applications, consumables, and cost-benefit ratios. We always pass this experience on to our customers. For example: Attention! Mistakes in selecting a new product can quickly lead to high costs, making your investment uneconomical or resulting in insufficient performance!

Condition: used, mileage: 32,500 km, power: 207 kW (281.44 HP), first registration: 12/2020, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, crane, Like-new and excellently maintained 12-ton Iveco 120E280 truck with Palfinger PK 7.501 SLD loading crane and 3 hydraulic extensions, remote control, 5th and 6th control circuits for attachments such as a rotating head and grab, next crane safety inspection in 04/2027, Meiller three-sided tipper body, 3-seater, payload 4,190 kg, air conditioning, differential lock on rear axle, tow hitch with pintle coupling, GVWR 26,000 kg, tipping hydraulic connections, and second tow hitch with ball coupling, reversing camera, from first owner with only 32,500 km, and more. Equipment: Short cab with rear window and 3 seats Wheelbase 3,690 mm Unladen weight 7,800 kg Payload 4,190 kg Engine Euro 6 D Drive 4x2 Palfinger PK 7.501 SLD loading crane, foldable behind the cab Crane with 3-stage hydraulic extension Lifting capacity at approx. 3.70 m / 1,700 kg // 5.50 m / 1,080 kg // 7.30 m / 780 kg // 9.20 m / 610 kg according to the manufacturer Optional crane extension with 1 hydraulic extension up to 11.1 m at 440 kg available for an extra charge Crane operating hours: 1,427 Crane safety inspection passed in 04/2026 Dual outriggers with swivel supports Remote control Rotating head and grab control Meiller 3-sided tipper body, 4.0 m x 2.35 m, side boards 0.50 m high Front panel 700 mm high 8-speed manual gearbox Differential lock on rear axle Front and rear axles with leaf springs Permissible front axle load 4,800 kg, permissible rear axle load 8,500 kg Air conditioning ABS Engine brake Reversing camera Tow hitch with pintle coupling Rockinger with air pressure connections Permissible gross vehicle weight 26,000 kg Hodpjza N Aaefx Afgsw Trailer load with continuous braking system 14,010 kg Tipping hydraulic connections at the rear for tipping trailers Tow hitch with ball coupling for trailer loads up to 3,500 kg Multi-function steering wheel Sun visor 2 rotating beacons on the cab roof Work lights Electrically adjustable side mirrors and electric windows Driver's seat with air suspension German vehicle from first owner Very good and excellently maintained condition Price NET, plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale excepted. Internal vehicle number: 2605

Condition: used, Year of construction: 2014, operating hours: 5,426 h, lifting height: 4,850 mm, fuel type: electric, mast type: triplex, battery manufacturer: GNB, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2014 Weights Empty weight: 3.806 kg Battery Battery: 625 Ah, 48 V, Year of manufacture 2014, Brand of battery GNB Functional Lifting capacity: 2.000 kg Maximum passing height: 216 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Heater = Remarks = = Additional options and accessories = Hjdpjz I Atwsfx Afgow - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2014, operating hours: 7,007 h, lifting height: 4,850 mm, fuel type: electric, mast type: triplex, battery manufacturer: GNB, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2014 Weights Empty weight: 3.806 kg Battery Battery: 625 Ah, 48 V, Year of manufacture 2014, Brand of battery GNB Functional Hsdpfoz I A R Nox Afgjw Lifting capacity: 2.000 kg Maximum passing height: 216 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Heater = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: good (used), Year of construction: 1986, Hollow Spindle Oil Country Lathe SARO SBF 710X2000 Made in Romania Year of manufacture: 1986 Main technical data: - Max. diameter passing through main spindle: 263.3mm - Max. swing over guideways: 710mm - Max. swing over cross slide: 400mm - Max. swing in gap: 950mm - Length between centres: 2000mm - Main spindle speed range: 4 – 500 rpm - Main motor power: 22 KW - Machine weight ab. 6,3ton Hsdpfx Asumtbrefgow The machine is in good condition. The electric equipment was changed with new one. For more information please contact us.

Condition: excellent (used), ANGELUS 120L AUTOMATIC CAN SEALER The ANGELUS 120L automatic can seamer is designed to hermetically seal metal containers using a double seaming process on industrial production and packaging lines for food products. The equipment incorporates a rotary seaming system that allows for continuous operation, synchronizing the feeding of cans and lids with the mechanical seaming operations. ANGELUS technology is widely used in the canning industry due to its robustness, mechanical precision, and ability to produce uniform seals in continuous industrial production processes. MAIN FEATURES - Manufacturer: ANGELUS - Model: 120L - Type: Automatic can seamer - Application: Sealing of metal containers - Rotary seaming system - Automatic and continuous operation - Automatic can feeding - Lid feeding and positioning system - Mechanical sealing by double seaming - First and second seaming pass operations - Synchronized container transfer - Drive system with electric motor - Mechanical seaming assembly with heads and rollers - Adjustment and adaptation to formats according to installed tooling - Robust industrial structure - Safety guards on moving parts - Accessibility for inspection and maintenance - Integrable into complete filling and sealing lines for canned goods OPERATING PROCESS Pre-filled cans are automatically fed into the ANGELUS 120L seamer, where they are positioned for the sealing operation. The system feeds and places the lids onto the containers, which are then conveyed to the rotary seaming mechanism. During the first seaming operation, the edge of the lid and the flange of the can body are mechanically folded to form the initial joint. In the second operation, the rollers compress and complete the formation of the double seam, creating a hermetic mechanical bond between the lid and the container body. Once sealed, the cans are automatically discharged and can continue to washers, inspection systems, autoclaves, pasteurizers, coolers, labelers, and end-of-line equipment. APPLICATIONS Especially suitable for canning industries processing fish, seafood, meat, vegetables, legumes, and prepared dishes, as well as other manufacturers of canned foods. Hsdpfx Aoz R S Hbofgsw It can be integrated with: - Automatic fillers and dosing machines - Lid feeding systems - Liquid topping dosing equipment - Vacuum systems, depending on line configuration - Can washers - Sterilization autoclaves - Seam inspection systems - Labeling and case packing lines The ANGELUS 120L provides an industrial solution for automating can sealing, offering a continuous and repetitive mechanical process. The compatible formats, production speed, and exact sealing characteristics will depend on the installed tooling and configuration. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Sharpens the front and rear edges in a single pass. Hodpfxszl Snuj Afgsw Technically inspected. Technical specifications in the PDF.

Condition: used, mileage: 242,350 km, power: 382 kW (519.37 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, MAN TGX 18.520 – SLIDING FLOOR – ACC – RETARDER ----VEHICLE HISTORY GERMAN VEHICLE VIDEO AVAILABLE UPON REQUEST ----Vehicle Data* MAN TGX * Semi-trailer tractor / Sliding floor * Type: L.2018.858.001 * First registration: 28.06.2023 * Mileage: 242,350 km * Operating hours: 4,970 h * Vehicle class: N3 * 2 axles * 1 driven axle * 2 seats * Maximum speed: 90 km/h Engine & Emissions* Diesel * 382 kW / approx. 520 hp * Displacement: 12,419 cm³ * Rated speed: 1,800 rpm * Emission standard: Euro VI * Stationary noise: 88 dB(A) at 1,350 rpm * Driving noise: 76 dB(A) Weights & Dimensions* Permissible total weight: 18,000 kg * Unladen weight / operating weight: 7,860 kg * Permissible saddle load: 10,140 kg * Permissible total weight as a semi-trailer combination: 40,000 kg * Length: 5,983 mm * Width: 2,550 mm * Height: 3,876 mm * Wheelbase: 3,600 mm * Rear overhang: 908 mm Axle 1* Tire size: 385/55 R22.5 * Aluminum rims * Leaf spring suspension * Permissible axle load: 7,500 kg Axle 2* Tire size: 315/70 R22.5 * Twin tires * Air suspension * 4x air springs * Alcoa aluminum rims * Permissible axle load: 11,500 kg Tank & Drive* 1x tank, 490 l * Retarder * Auxiliary drive * Differential lock * Hill start assist * Tipper controls on the driver's side Cab & Comfort* Controls located at the bottom of the driver's door * Heated seat * Ventilated seat * Electric windows * Heated side mirrors * Multifunction steering wheel * Leather steering wheel * Automatic climate control * Auxiliary heater * Auxiliary air conditioning * 2x bunk * Refrigerator * Multimedia display Assistance & Safety* ACC / Adaptive Cruise Control * Lane keeping assistant * Blind spot monitoring system * Lane change assist * Battery disconnection Additional Equipment* Camera system available * New tachograph / control unit * Tachograph replaced on 12.12.2024 Hjdpfxszuqtbe Afgsw MOT & Inspections* Main inspection valid until 30.01.2026: no defects found * Engine management / emission control system: passed * Safety inspection valid until 31.07.2026: no defects found * Next main inspection: * Next safety inspection: EXPORT / NOTE EXPORT SALES ONLY WITH A DEPOSIT (MIN. 500 - 2,000) FOR SALES TO EU AND NON-EU COUNTRIES, A DEPOSIT OF AT LEAST 500.00 / 1,000.00 IS REQUIRED. EXPORT REGISTRATION EXW POSSIBLE IN 10 MINUTES (AUTHORIZED EXPORTER). 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AS WELL AS 15 DAYS AUSTRIA REGISTRATION POSSIBLE. VEHICLE RESERVATIONS ARE ONLY POSSIBLE VIA THE EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. SUBJECT TO CHANGES, ERRORS AND PRIOR SALE.

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Hjdpfx Aex Syvcsfgsw

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate Hsdpfx Afoyxhq Uogjw - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2002, machine/vehicle number: M354, Used PROCOMAC RM 36-42-6 filling monoblock, flat liquids 9000 BPHTechnical Specifications & Performance DataThe PROCOMAC FILLSTAR BLOCK is a filling monoblock designed for integrated rinsing, filling and capping of still products in PET bottles. Built in 2002, the PET HAL 36/42/6 configuration combines a PROCOMAC GRIPSTAR rinser, HAL SF filler and AROL PK capper in a compact rotary bottling unit for beverage production and industrial packaging applications.Manufacturer: PROCOMACModel: PET HAL 36/42/6Configuration: rinser, filler and capper monoblockMaximum production speed: 9,000 bph on 0.5L bottlesRinser: PROCOMAC GRIPSTAR with 36 grippers and 1 treatmentFiller: HAL SF with 42 filling valves for still liquidsCapper: AROL PK with 6 heads for PCO 1881 capsCurrent bottle formats: 0.5L, 1.5L and 2.0LBottle neck diameters: 66 mm, 89 mm and 95 mmList of overhaul / revision works - Overhaul of main gearbox - Overhaul of main motor bearings - Replacement of carousel drive belt - Overhaul of star wheel bearings - Overhaul of rinser grippers - Overhaul of rinser rotary manifold - Overhaul of filler pneumatic cylinders - Inspection of bottle transfer grippers - Overhaul of filling valves - Overhaul of valve lifting carriage - Overhaul of product rotary manifold - Overhaul of inlet modulating valve - Overhaul of sanitizing by-pass valves - Overhaul of capper pistons - Overhaul of capper heads - Overhaul of capper cones - Replacement of centrators - Overhaul of cap distributor - Inspection of pneumatic system - Inspection of electrical system - General functional checkAdvanced Automation & Control SystemsThe monoblock is equipped with a dedicated separate electrical panel and Siemens electrical components. A Siemens S7 PLC provides machine control, while the ESA 9-inch touchscreen operator panel supports day-to-day operation and adjustment. The electrical supply is specified at 380 V, 50 Hz, three phases plus neutral, with a 24 V auxiliary supply and 10 kW installed power.Siemens S7 PLC control systemESA 9-inch touchscreen operator interfaceDedicated separate electrical panel380 V, 50 Hz, three phases plus neutralInstalled power: 10 kWProduction Line Integration CapabilitiesDesigned as an integrated rinser-filler-capper block, this machine can serve as the central filling station in a used bottling line for PET bottle production. Neck-handling bottle transfer supports stable container movement through the rinsing, filling and capping stages. The quick format-change arrangement supports changeovers between the listed 0.5L, 1.5L and 2.0L bottle formats, making the monoblock suitable for production lines that require multiple package sizes.The pneumatic cap elevator and feeder manufactured by BERTOLASO supplies caps to the AROL capping section. Upstream and downstream conveyor systems can... Hjdpfxo Adtt He Afgow

Condition: good (used), operating hours: 12,556 h, lifting height: 3,200 mm, mast type: duplex, power: 55 kW (74.78 HP), fork length: 1,400 mm, Year of manufacture: 2019 Year of construction: 2019 Empty weight: 7.020 kg Lifting capacity: 5.000 kg Maximum passing height: 2.600 mm CE mark: yes Technical condition: good Hodszlcf Djpfx Afgjw Visual appearance: good

Condition: good (used), operating hours: 3,460 h, lifting height: 4,350 mm, fuel type: electric, mast type: triplex, Year of manufacture: 2015 Empty weight: 1.300 kg Lifting capacity: 1.400 kg Maximum passing height: 200 cm CE mark: yes Technical condition: good Visual appearance: good Remanufactured: Yes Please contact Tobias Mayr for more information = Additional options and accessories = - Battery charger Hedpfx Afoz Sxmvogsw