Used Pass Boat for sale (1,115)

Condition: used, mileage: 29,800 km, power: 115 kW (156.36 HP), fuel type: gasoline, gearing type: mechanical, first registration: 07/1981, next inspection (TÜV): 09/2027, color: red, number of seats: 2, Equipment: all wheel drive, Original early model fire engine, second owner, which has never been used for civilian purposes. Vintage vehicle inspection (according to §23 StVZO for the allocation of an H-registration plate) passed recently. MOT valid until 09/2027 ("no defects found" at DEKRA). Year of manufacture 1981 / First registration month: 07-1981. Original, only 29,800 total kilometers driven. Only used for fire service up to now. Advanced emergency vehicle (VRW) with ZIEGLER body and Knurz-Kirsch generator with 5 kVA output. German-made, kept in a garage, with the original vehicle registration document (only 2 owners) and was registered until recently. Tedpfexthdzox Afged The vehicle manufacturer listed in the original documents is GFG "Geländefahrzeug-Gesellschaft", which at the time was a joint production of Daimler-Benz and Steyr-Daimler-Puch in Austria. This is one of the last vehicles built with this manufacturer designation; shortly thereafter, "Daimler-Benz" was also listed as the vehicle manufacturer in the registration documents. A complete MATTER roll bar was installed in the vehicle in 1991 (properly registered in the documents). Included is a small roof rack system for transporting long equipment. The long 280 GE is the largest and most powerful of the first G-series, and is what could be ordered as standard from the factory as a Mercedes G-Class in the early years. The six-cylinder inline gasoline engine M110 with 2717 ccm and 115 kW/156 hp starts and runs well. 4-speed manual transmission plus locking differentials. Power steering. 155 km/h is listed as the maximum speed. A side power take-off for operating the generator is also present. The vehicle was most recently used primarily to transport a portable fire pump with suction hoses and accessories. Therefore, there are no seats in the back, and it has a loading area like a truck. Unfortunately, no other seats are available besides the 2 front seats. According to the original documents, it is a "3-seater" and the type of registration is "Other motor vehicle, fire engine, advanced emergency vehicle VRW". The unladen weight is stated as 2360 kg. The permissible total weight (originally 2900 kg) was increased to 3030 kg in 1991, according to the entry in the vehicle documents. Therefore, this 280 GE currently has a payload of 670 kg. Overall vehicle dimensions: length 4395 mm / width 1700 mm / height 2150 mm. Tires 205/80R16 in good condition. Winter tires with the snowflake symbol according to current legal requirements are mounted (DOT 2018). Although the G does not have a trailer hitch, the necessary base frame is installed. Unfortunately, it is not possible to provide information on retrofitting/trailer load, as the corresponding fields for the trailer load in the original registration document are marked with "not applicable". According to the oral account of the last vehicle owner, the Mercedes has not been involved in any accidents, but this cannot be documented in writing and is therefore passed on to the buyer as "information". The 280 GE was driven a long distance on the highway to us, which it completed without any problems. A new battery has recently been installed, and the gear linkage has been newly fitted. The off-road vehicle is immediately available and is looking forward to new tasks. This offer is only valid for commercial enterprises, freelancers, authorities, emergency services, agriculture and forestry, and similar self-employed individuals. Sale to purely privat

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Weight: 230 kg Very good condition Application: Tjdpfxo Agw Egs Afged Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. The contaminated fleece ends up in a dirt and sludge container.

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket Tedpfx Afju Rimmegjd - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg good condition

Condition: used, Year of construction: 2012, functionality: fully functional, total length: 30,000 mm, drilling capacity: 40 mm, type of input current: three-phase, total width: 3,500 mm, drill diameter: 40 mm, input voltage: 400 V, FICEP HP35T - CNC SAWING & DRILLING LINE FOR ANGLE STEEL | YEAR 2012 | RECONDITIONED The Ficep HP35T is a CNC-controlled sawing and drilling line for the economical series processing of angle steel (L-profiles) in structural steelwork. Sawing and drilling run in a single automated pass with DSTV data connectivity, reducing handling, marking time and scrap for beam connections, gusset plates and lattice structures. CONDITION & RECONDITIONING Reconditioned and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The HP35T processes equal- and unequal-leg angle steel (L-profiles) up to 350 x 350 mm leg dimension and combines sawing with two drilling spindles (max. dia. 40 mm) into one continuous machining process. Material is fed via a motorized infeed roller conveyor, hydraulically clamped and positioned under CNC control. The PC-based Ficep CNC control enables manual programming at the operator terminal as well as direct program import from structural-steel CAD systems (e.g. Tekla, SDS/2, BOCAD) via DSTV. Typical applications: structural steelwork and profile processing, lattice and mast structures, plant and steel hall construction, gusset plates and beam connections. TECHNICAL DATA Tjdpfx Aexn T Smofgsd - Manufacturer: Ficep | Model: HP35T | Year: 2012 | Serial number: 25029 - Machine type: CNC angle processing line (sawing & drilling line) - Condition: used, reconditioned by certified technician - Cutting process: saw - Drilling spindles: 2 x drilling spindle, max. drill dia. 40 mm - Clamping: hydraulic - Profile type: equal- and unequal-leg angle steel (L-profiles) - Max. leg dimension: up to 350 x 350 mm | Min. profile: approx. from 50 x 50 x 5 mm - Feed rate (max.): approx. up to 40 m/min - Positioning accuracy, longitudinal axis: approx. +/- 0.2 mm - Hydraulic unit motor: approx. 15 kW | Feed motor (servo): approx. 3 kW - CNC control: Ficep proprietary / PC-based - DSTV interface: direct import from structural-steel CAD - to be confirmed during inspection - Electrical connection: 400 V / 50 Hz / 3-phase + N + PE (TN-S), control voltage approx. 24 V DC - Overall machine length: approx. 30,000 mm (line incl. roller conveyor; exact dimension before loading) - Machine width: approx. 3,500 mm | Machine weight: on request Note: Values marked "approx." are reference figures and will be confirmed bindingly during inspection. SCOPE OF DELIVERY - 1 x Ficep HP35T angle steel processing line (year 2012) - 1 x hydraulic unit (integrated) - 1 x CNC control unit with operator terminal - 1 x infeed roller conveyor (motorized) - 1 x electrical control cabinet - 1 x machine documentation / operating manual (Italian/English) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, mileage: 69,986 km, power: 74 kW (100.61 HP), first registration: 03/2023, fuel type: gasoline, overall weight: 2,090 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,425 mm, total width: 1,845 mm, total height: 1,864 mm, loading space length: 1,593 mm, loading space width: 1,257 mm, loading space height: 1,276 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0606. NR64493 ----EQUIPMENT * Airbag: Front airbag for passenger - Front airbag for passenger including deactivation function and glove compartment with lid * Towing hitch preparation - Preparation kit for retrofittable towing hitch including ESP trailer stability (includes trailer module and connection preparation for 13-pin socket) * Heated windshield including electrically adjustable and heated exterior mirrors Tedpfxj Af Drco Afged * Cargo area lighting, LED * Parking pilot system, front and rear * Seats: Seat Package 18 - Fabric "Capitol/City" in Ebony (black) - Double co-driver's seat (with storage compartment under smaller seat section), variably foldable and collapsible - Driver's seat, 3-way manually adjustable (fore/aft, height, backrest) - Headrests, height-adjustable - Lumbar support, manual (driver's seat) * Partition to the cargo area with pass-through opening without window * Transmission: 6-speed manual * ABS with EBD * Airbag, driver's side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, narrow mirror design * Battery, reinforced * Hill start assist * Floor covering, rubber, front * On-board computer including outside temperature display * Third brake light * Roof storage compartment in front, across the entire interior width, including lateral grab handles * Double-wing rear door without window * Rev counter * Electronic stability program (ESP) with traction control (TCS) including Torque Vectoring Control and adaptive load control * Power windows, front, electric - with quickdown function for driver's side * Ford Easy Fuel - comfort fuel filler cap and misfuelling protection * FordPass Connect - information about the current condition or location of the vehicle and control of selected vehicle functions via smartphone with the FordPass app - including WLAN hotspot * Glove compartment with lid * Interior lighting, front, with delay function * Air conditioning, front, including semi-electronic recirculation function * Paint: solid color * Cargo area protection, plastic, molded * Cargo area lining, side, half-height * Steering column, adjustable in height and reach * Alternator/generator * Center console, front - open with storage area, 2 cup holders * Fog lights * Emergency brake light - hazard warning light activation during heavy braking * Gasoline particulate filter (OPF) * Radio: Ford Audio System 2 - Radio DAB/DAB+ - Radio (FM/AM) - USB port - Bluetooth interface - Audio remote control on the steering wheel * Sliding door, rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Safety brake assistant EBA - Emergency Brake Assist * Seat belts - seat belt pretensioners and force limiters, front - warning system for unfastened seat belts for driver and passenger * Automatic door locking, automatic (45 seconds) - Automatic re-locking if no door is opened within 45 seconds after unlocking via remote control * Sun visor for driver and passenger * Start-Stop system * Dust and pollen filter * Socket: 12-volt socket on center console, front * Bumpers, front, and bumper end caps, rear, painted in vehicle color * Daytime running lights * Partition to the cargo area without window * Child safety lock on sliding doors * Door handles, black * Lashing eyes * Engine immobilizer, electronic (EPATS) * Heat-absorbing glass, lightly tinted * Central locking with remote control ... and more ----The vehicle is in un

Year of construction: 2006, condition: used, machine/vehicle number: PX20, Used KHS INNOPRO CMX-18 mixer 18 m³-h - Year 2006Technical Specifications & Performance DataThe KHS INNOPRO CMX-18 is a premix mixer designed for beverage production and integration into an industrial packaging or used bottling line. Manufactured in 2006, this process unit has a nominal capacity of 18 m³/h and is engineered to prepare, deaerate, mix and transfer beverage product toward the filling area.Manufacturer: KHSModel: INNOPRO CMX-18Manufacturing year: 2006Nominal capacity: 18 m³/hBuffer tank capacity: 850 LMaximum pressure: 8 barTest pressure: 11.44 barTemperature range: 20 / 100 °CAdvanced Automation & Control SystemsThe premix system includes process instrumentation for pressure, flow and level monitoring. Flow transmitters, flow-indicating controllers, pressure indicators, pressure alarms, pressure switches, level switches and level alarms support controlled product handling through the deaeration, transfer and buffer stages.Control air is supplied at 4–5 bar, with an associated gas or air line indicated at 6–6.5 bar. The process arrangement includes controlled flow sections and valve manifolds for product routing, CIP circulation and syrup-return functions.Production Line Integration CapabilitiesThis KHS premix mixer is suited to installation upstream of a filler in a beverage production line. The process schematic shows a dedicated outlet connection to the filler, allowing the prepared product to be transferred from the buffer tank to downstream filling equipment.Water and CIP connections are integrated into the valve manifold, while dedicated CIP syrup-return branches support cleaning and product-return operations. The system uses carbon dioxide supply connections for deaeration and beverage preparation, making it appropriate for production environments where controlled mixing and gas management are required.Water connection: Ø2.1/2"CIP connection: Ø2.1/2"CIP syrup-return connections: Ø1.1/2"Filler outlet connection: Ø4"Sealing-water connection: DN15Machine Condition & Maintenance HistoryThis second hand KHS premix mixer was manufactured in 2006. The available technical documentation identifies the process configuration, vessel ratings, utility connections and instrumentation layout. The equipment is configured as a complete mixing and transfer unit with deaeration, buffer storage, pumps and process-control instruments.Operational Performance & VersatilityThe INNOPRO CMX-18 incorporates a deaeration vessel, buffer tank, six pumps and a product-transfer circuit. Product passes through controlled flow sections before entering the buffer tank and being pumped toward the filler. Carbon dioxide connections, deaeration capability and a dedicated buffer stage support stable product preparation before packaging.The integrated CIP and syrup-return manifold enables cleaning circulation through the process circuit. This configuration is valuable for beverage production operations requiring hygienic product changeover and e... Tedpfx Afe Adtqrsgjd

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, total width: 1,500 mm, total height: 2,050 mm, total length: 900 mm, working range: 600 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, scan area length: 150 mm, scan area width: 150 mm, table length: 600 mm, table width: 600 mm, space requirement width: 1,550 mm, space requirement height: 2,100 mm, laser wavelength: 1,064 nm, working height: 950 mm, input frequency: 50 Hz, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) Tsdpfoy Urpysx Afged - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus - EZCAD marking software in German / English (other software available on request) - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical data: - roller width 1350mm - max. pass height 70mm - glue application on one or both sides - 2-roller - diameter of glue-applying rollers (top/bottom) 160mm - main motor 0.75kW - dimensions (length/width/height) 2000x750x1550mm - weight approximately 534kg Todpfxezx R R Us Afgsd ADVANTAGES – German production – used glue applicator – very good condition Net price: 13900 PLN Net price: 3230 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to exchange rate fluctuations)

Condition: used, mileage: 99,900 km, power: 88 kW (119.65 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,050 kg, next inspection (TÜV): 12/2026, color: silver, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,399 mm, total width: 1,956 mm, total height: 1,953 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Parking assist system (rear), wooden floor in the cargo area, visibility package, mobile office package 1, exterior mirrors with wide-angle view, cargo area partition with pass-through, seats in the cab: double passenger seat convertible, wheel covers, spare wheel in driving condition, trim in the cargo/passenger compartment Additional equipment: Airbag (driver side), anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, battery 85 Ah, on-board computer, tachometer, automatic activation for headlights, glove compartment with cooling function, rear hinged doors without glazing, interior filter: pollen filter, body/superstructure: standard van, fuel tank: 80 liters, steering column (steering wheel) adjustable, model upgrade, engine 2.0 L - 88 kW dCi Diesel Energy, rear fog light, radio preparation, wheelbase 3498 mm, low emission according to exhaust standard Euro 6d-TEMP, sliding door cargo/passenger compartment (right), seat cover/upholstery: fabric, seats in the cab: driver's seat comfort, 3-way adjustable, start/stop system, lashing eyes in the cargo area (side), pre-equipment for electrical superstructure, heat-insulating glazing Equipment: power steering * Central locking Climate control: air conditioning Safety: ABS * ESP Tsdpfx Ae Agf Ayjfgjd The vehicle is in very good condition! Valid TÜV inspection until 12-2026, new inspection possible for an additional cost. Financing possible!

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers Todpfoz Nyvyex Afgsd - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: Todpfxo Af E Ilo Afgjd The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Technical specifications: Type: Semi-automatic machine for producing hardcovers Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: used, mileage: 75,000 km, power: 70 kW (95.17 HP), first registration: 12/2021, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, second-hand vehicle warranty, soot filter, Special equipment: Electrically folding exterior mirrors, parking assistance system (rear), preparation for digital radio reception (DAB), tinted rear and rear side windows, heated front seat (right), heated front seat (left), sun visor with mirror (right) Additional equipment: Tsds Agdfpopfx Afgod Storage compartment in sliding door, storage compartment above windshield, airbag for passenger side, airbag for driver side, traction control system (ASR), folding rear center armrest with pass-through option (removable), electrically adjustable and heated exterior mirrors (both), outside temperature display, BlueEfficiency package, coming-home function, headliner (front and rear), design and equipment line Standard, tachometer, tailgate with window, windows for rear doors / tailgate with wiper/washer system, interior filter: pollen filter, interior mirror, interior trim, high-quality finish, Isofix mounting points for child seat in rear seat, body/structure: station wagon, head airbag system (window bag), engine 1.5 Ltr. - 70 kW CDI CAT, passenger car registration, wheelbase 2697 mm, trip computer, folding rear seat bench, low emissions according to exhaust standard Euro 6d-TEMP, sliding door for cargo/passenger compartment (left), sliding door for cargo/passenger compartment (right), side airbag (side bag) front, side airbag front, driver side, side window in cargo/passenger compartment / sliding door front left, can be opened, side window in cargo/passenger compartment / sliding door front right, can be opened, side window in cargo/passenger compartment rear left, fixed, side window in cargo/passenger compartment rear right, fixed, front left seat, height adjustable, steel rims 6x15, start/stop system, socket (12V connection), carpeting in passenger compartment, carpeting in cargo compartment, carpeting in passenger/cargo compartment, warm air duct to passenger compartment, heat-insulating glazing, auxiliary heater.

Condition: used, machine/vehicle number: 008428, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Corner Rounding Unit: yes Tedpfx Afj Aax Syeged Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. Todsz Ek S Aopfx Afgjd ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, mileage: 469,457 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,820 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,500 mm, loading space width: 2,470 mm, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional options and accessories = - Remote-controlled central locking - Refrigerator - Lift axle - Air suspension - Fifth wheel coupling - PTO (Power Take-Off) - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Tool box = Notes = HMF 4020 K5 5 x hydraulic extension Year 2025! Scanreco radio remote control. FJ1000 K5 5 x hydraulic extension Year 2020 Loading box: 650 cm + 100 cm extension. Boat support legs. Tool box. Trailer coupling. = Further information = Tedjy T Hydepfx Afged Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Suspension: Air suspension Rear axle 3: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Air suspension Weights Unladen weight: 19,875 kg Payload: 15,125 kg GVW (Gross Vehicle Weight): 35,000 kg Functional Crane: HMF Financial information Price: Upon request Identification Model number: TGS 35.510 8x4-4 BL / HMF 40 tm = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, mileage: 95,000 km, power: 147 kW (199.86 HP), first registration: 01/2021, fuel type: diesel, next inspection (TÜV): 07/2027, color: blue, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, parking heater, second-hand vehicle warranty, soot filter, Special equipment: Tedpfx Afoztk Snegjd Ambient lighting Plus, ambient lighting multi-color, door entry lights in the front and rear doors, LED, audio navigation system Discover Pro Streaming & Internet (touchscreen, Bluetooth, USB), audio system Ready 2 Discover (including Streaming & Internet, touchscreen, Bluetooth), voice control system, mobile phone interface Comfort with wireless charging function, multimedia interface 2 x USB (Type C) in the front, App-Connect incl. App-Connect Wireless (Apple CarPlay, Android Auto), Digital Cockpit (digital instrument display), pre-equipment for digital vehicle key in the smartphone, luggage compartment cover with electric opening, Business Package Premium with navigation, heated windshield washer nozzles, mobile phone interface Comfort with wireless charging function, multimedia interface 2 x USB (Type C) in the front and 1 x USB charging port (Type C) in the center console in the rear, App-Connect incl. App-Connect Wireless (Apple CarPlay, Android Auto), Climatronic 3-zone air conditioning, interior filter: odor and allergen filter, front seat heating, lumbar support in the front, electrically adjustable on the left and with massage function, front left seat with massage function, 230V socket, headliner fabric, black, driving assistance package Plus, driving assistance system: Park Assist (parking steering assistant), parking assist front and rear, automatic headlight range control, fog lights and reversing lights on both sides, rear lights LED, dark red, dynamic turn signals, vehicle without tire repair kit, head-up display, driver's side knee airbag, side airbag and belt pretensioner rear outer, driver's side knee airbag, rear side airbag, rear seat belts with belt pretensioner, luggage compartment cover with electric opening, heated steering wheel (sports/leather) with multifunction and shift function, Mobile Online Services We Connect Plus, side windows made of laminated glass, rear side windows and rear window tinted (65 %), rear window laminated glass, front side windows sound-absorbing, front left seat ErgoActive (incl. 14-way electric seat adjustment, memory, massage function), front seats electrically adjustable, left ErgoComfort with memory and comfort entry, special paint Aquamarine Blue Metallic, auxiliary heating with auxiliary ventilation (remote control and timer), roof rails anodized, front seat heating Other equipment: 3-point safety belt rear center, airbag driver/passenger side, passenger airbag can be deactivated, antenna diversity, anti-slip control (ASR), ALLTRACK equipment, automatic headlight activation (ALS) with leaving home/coming home function, exterior mirror aspherical, left, exterior mirror aspherical, right, exterior mirror chrome matte, exterior mirror electrically adjustable, heated and foldable, exterior mirror with automatic dimming, left, exterior mirror with automatic lowering function, right, exterior mirror with surrounding lighting, outside temperature display, turn signal integrated in exterior mirror, chrome package 2, chrome surround light switch, chrome surround window switch / mirror adjustment, chrome strips on side windows, roof rails, anti-theft device for wheels (wheel locks), dual-tone horn, parking assist front and rear, electronic differential lock (EDS), driving assistance system: trailer stabilization program, speed limiter, driving assistance system: multi-collision brake, power windows front and rear, remote unlocking of tailgate, floor mats textile, footwe

Condition: good (used), Hang 101-50 Eyeletting machine The machine is in perfect condition and ready to use. Technical specifications: 1 eyeletting head (Hang 271 rivet, hole diameter approx. 6mm) Maximum capacity: 20 sheets 230V power supply Front and side margins Operation: foot pedal or hand switch. Tedpfxo Af E Edj Afged The machine punches and crimps the eyelet in a single pass. Automatic eyelet feeding.

Condition: used, overall weight: 1,500 kg, workpiece length (max.): 2,500 mm, workpiece width (max.): 190 mm, workpiece height (max.): 200 mm, grinding belt length: 1,800 mm, grinding belt width: 200 mm, transport length: 2,650 mm, transport width: 1,100 mm, transport height: 2,000 mm, Equipment: CE marking, documentation/manual, No. 04555 Double-sided sanding machine LÖWER DSM 2000 Used For sanding both sides of wooden workpieces in a single pass 2 belt sanding units, top and bottom Max. workpiece width 190 mm Max. workpiece height 200 mm Max. workpiece length 2500 mm Sanding belt width 200 mm Sanding belt length 1800 mm Sanding belt speed 1300 m/min Sanding motor power 2x 5.5 kW Sanding motor speed 2870 rpm Feed speed 6 / 11 / 16 m/min Workpiece feed via conveyor belts Motorised height adjustment Height adjustment motor power 0.37 kW Digital workpiece thickness display Sanding belt oscillation Pneumatic sanding belt tensioning 2 brushing units, top and bottom Brush diameter 120 mm Brush length 190 mm Compressed air operating pressure 6 - 8 bar Dust extraction connections 2x Ø 150 mm and 2x Ø 120 mm Required extraction airflow 2515 m3/h Minimum air velocity at the extraction connection 20 m/s Negative pressure at the extraction connection 889 Pa Electrical connection 400 V / 50 Hz / three-phase Required on-site fuse rating 32 A CE marking Technical documentation including operating manual available Transport dimensions approx. 1600 x 1500 x 1800 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Todpfx Ajz N Ixcefgjd Delivery terms: ex warehouse

Condition: used, maximum load weight: 27,878 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2016, next inspection (TÜV): 10/2027, loading space length: 13,450 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, loading space volume: 86 m³, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2016, Equipment: ABS, 3-axle Schmitz SKO 24/L-13.4 FP 60 COOL Frigo VIN: 5160833 Chassis / Components: * Air suspension // Raise and lower * Lift axle * Schmitz Rotos axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 50%, Middle approx. 90%, Rear approx. 90% * Jost support legs * Spare wheel carrier, 2 x tires * Plastic diesel tank Body: * Schmitz Frigo Pharma * Side walls COOL 60 mm * Schmitz refrigeration unit * Diesel hours: 2,104 hours * Electric hours: 3,146 hours * Aluminum floor * DIN EN 12642 CodeXL * Mains operation * Dimensions: Length: 13.45 m, Width: 2.46 m, Height: 2.60 m * Approx. 86 m³, 33 pallet spaces * Rear door: Roller shutter, heavily insulated (COOL) Weights: * Gross vehicle weight: 36,000 kg * Tare weight: 8,122 kg * Payload: 27,878 kg Other: * German vehicle * MOT 10/2027 -- Inspection 04/2027 * Certificate: Pharmaserv New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As we are very concerned about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you load your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Tjdpfx Aj Af Ddxsfgod Day passes / export license plates We will gladly help you obtain export license plates / short-term license plates. Handling customs formalities We will gladly help you with customs matters.

Condition: used, System: Used Chamber Filter Press Type: Passavant Area of application: Sludge dewatering Design: Bridge beam Filter plate format: 1500x1500 Number of plates: approx. 70 Filter plates: PP Filter cake capacity: approx. 3330 dm3 Filter cloths: optionally available depending on the medium Tsdpfx Aov Nqd Tofged Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the systems by appointment at our factory. 2 identical units available

Condition: good (used), fuel type: gas, fork length: 2,710 mm, Year of manufacture: 2013 Maximum passing height: 0,218 cm CE mark: yes Technical condition: good Visual appearance: good Production country: FR Please contact Christian Theißen for more information Manufacturer: Manitou Model: MI 30 G Year of build: 2013 Condition: Used Data: Max. lifting height: 4,59 m Max. Lifting capacity: 3.000 kg Length forks: 1,80 m Drive type: Gas Dimensions LxW (without forks): 2,71 x 1,24 m Tedszntvfspfx Afged Stowed height: 2,18 m Empty weight: 4.750 kg Special features: White tires. Side shifter, street lighting, trailer operation possible. Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2026, Genie AWP-30S (AC) personnel lift with 10m working height, new, used - demonstration units available Todpfxerpzfto Afgsd

Condition: used, mileage: 668,740 km, power: 368 kW (500.34 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: silver, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space length: 7,550 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), MAN TGX 26.500 6x2-4LL Chassis VIN: P114485 Chassis / Components: * Wheelbase: 4,800 mm / 1,350 mm * Full / Air suspension * Lift axle // Steering axle * Tires: 315/70 R 22.5 * Remaining tread: Front approx. 80/90%, Rear approx. 80%, Steer axle approx. 60% * Alcoa aluminum rims * 1 x Diesel tank * 1 x AD-Blue tank * Chassis length from cab: 7.55 m * Chassis height: 980 mm Cab: * XLX * 1 x Bunk * Automatic climate control * Auxiliary heater * Refrigerator * Radio * Cruise control * Adaptive cruise control * Lane departure warning system Superstructure: * Chassis * Length from rear of cab: 7.55 m Engine / Transmission: * 12,419 cc // 500 hp / 368 kW // EURO 6c * ZF-TraXon / Automatic * ZF-Intarder * Differential lock Weights: * Gross vehicle weight: 26,000 kg * Unladen weight: 12,060 kg (with superstructure) * Payload: 13,940 kg Other: * German vehicle ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters. Tedpfe Agdg Rsx Afged

Condition: excellent (used), Catalog number: 7721 TECHNICAL DATA - Working width: 1300 mm - Maximum pass height: 60 mm - Rubber rollers: 2 pcs - Rubber roller diameter: 190 mm - Motor: approximately 1.1 kW - Dimensions (L/W/H): 2020x770x1260 mm - Weight: 500 kg Tjdpezrlraefx Afgjd FEATURES – Used glue applicator – Very good condition Net price: 14,900 PLN Net price: 3,470 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, mileage: 469,457 km, power: 375 kW (509.86 HP), first registration: 08/2020, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,820 mm, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,500 mm, loading space width: 2,470 mm, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional options and accessories = - Remote-controlled central locking - Refrigerator - Lift axle - Air suspension - Fifth wheel coupling - PTO (Power Take-Off) - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Tool box = Notes = HMF 4020 K5 5 x hydraulic extension Year 2025! Scanreco radio remote control. FJ1000 K5 5 x hydraulic extension Year 2020 Loading box: 650 cm + 100 cm extension. Boat support legs. Tool box. Trailer coupling. = Further information = Tjdpfx Asztxf Nofgsd Technical information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 75%; Tire tread depth right: 75%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/70R22.5; Double tires; Tire tread depth left inside: 80%; Tire tread depth left outside: 80%; Tire tread depth right inside: 80%; Tire tread depth right outside: 80%; Suspension: Air suspension Rear axle 3: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Air suspension Weights Unladen weight: 19,875 kg Payload: 15,125 kg GVW (Gross Vehicle Weight): 35,000 kg Functional Crane: HMF Financial information Price: Upon request Identification Model number: TGS 35.510 8x4-4 BL / HMF 40 tm = Company information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.