Used Pass Boat for sale (1,000)

Condition: used, tank capacity: 3,685 l, GENERAL INFORMATION Design: suspended Remarks: 4 lugs made of steel; 1 vessel with insulation (insulating shell made of steel, painted; external diameter approx. 1780 mm) Speed: 347 rpm Internal diameter: 1,600 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Overall height: 3,650 mm Heating/cooling: available Power: 1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Shaft seal: Mechanical seal with thermosiphon vessel Cjdexqa Tpspfx Afnjgn Agitator: Propeller Location: Bremen Technical documentation: Drawings, TÜV certificates Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,685 liters Jacket volume: 65.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Chemical industry VESSEL Max. permissible operating temperature: 200 °C Support type: Lugs HEATING/COOLING JACKET Max. permissible operating vacuum: 1.0 bar Base temperature control: Half-pipe coil EQUIPMENT Manhole/dome: on top head (DN 500) Discharge: Flange DN80 Note: slight adhesions, metallic discolorations inside MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR Agitator manufacturer: Stelzer Voltage: 500 V Agitator arrangement: eccentric on top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5 mm Top head wall thickness: 7 mm

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. Cgedpfxoq Nfuzo Afnon 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: used, Boat accessories, ship accessories, spreader schooners, mooring schooners, fenders, lifeline cushions, railing schooners, boats, ships -approx. 180 positions boat accessories Cedpfob Uhuzsx Afnsgn - see photos -we can send you the complete photos of the positions - will only be sold complete

Year of construction: 2021, condition: used, functionality: fully functional, You are bidding here on a Hobart rack conveyor dishwasher, model CN series. The machine was first installed in a canteen operation in 06/2021 and was used there for lunch service. Due to business closure, operations stopped in 12/2024. The dishwashing system was purchased new by the operator, treated with care, and all necessary maintenance was professionally performed. Cgjdpfx Ajx R R Utsfnjn The machine will likely be available for delivery from February 2026. HOBART presents the new generation of the proven CN series as a powerful PROFI version – the new rack conveyor dishwasher delivers increased efficiency and cost-effectiveness, making commercial dishwashing even more sustainable. Professional, powerful, and reliable for the daily demands of commercial kitchens. Optimal wash results with low energy consumption – even for plastic items. The CN series rack conveyor machines are modular, operating from left to right with pre-wash, main wash, rinsing, drying, and roller conveyor discharge. You will receive an invoice with indicated VAT. Equipment details: • Climate exhaust air heat recovery for smart energy use • Climate-Pro heat pump saves up to 20 kWh • LC detergent saving system • Triple rinse • Washing system with wide-angle nozzles • Dynamic-Dry drying • Automatic water consumption • Empty rack detection • Permanent soil removal: ASR soil discharge • Control system with USB interface • Drop-in washing system • Color-coded cleaning aids • Coded curtains • Coded wash and rinse arms • Deep-drawn drain fitting • Fully deep-drawn wash basin • Easy-to-clean condenser • No contact between wares and wash water • TRI-RINSE: high-quality rinsing result via 3-stage zone • PERMANENT-CLEAN soil removal: revolutionary filter system eliminates manual pre-rinsing • LC detergent saving: reduces detergent consumption by up to 50% • Automatic water adjustment: machine consumption automatically adapts to load • CLIMATE heat recovery: optimally uses exhaust air • CLIMATE-PRO heat pump: innovation meets efficiency and cost-effectiveness • RACK-FLOW sensor system: easy one-person operation • Fully deep-drawn tank: no residue build-up • Easy-to-clean condenser • Deep-drawn drain fitting • DYNAMIC-DRY drying: optimal results thanks to new blower technology with higher dynamic airflow—up to 50% increased efficiency Technical data: • External dimensions (W x D x H): 4215 x 2336 x 2150 mm (see photo sketch) • Pass-through width: 510 mm • Pass-through height: 440 mm • Electrical connection: 400V 3NPE 50Hz; 26.5kW • Model: CN-C-A-CDC • Serial number: 866707054 • Year of manufacture: 2021 6 months warranty on electrical components, limited to the replacement of defective parts (excludes labor costs for removal and installation). Warranty claims require installation and commissioning by an authorized Hobart service provider. Subject to change and errors.

Condition: excellent (used), CATALOG NUMBER 7324 Cgsdpox S I Nqofx Afnen Technical specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: metal roller + pad + metal roller - Bottom: metal roller + pad + metal roller Top side: - 2 rubber, traction pressure rollers - sanding unit - slip roller - 2 rubber, traction pressure rollers Bottom side: - sanding unit - side guide bar - electrically adjustable sanding height 0.37 kW - 6 feed speeds + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.6 kW - main motors: 2 x 4 kW - extraction port diameter: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg – not painted – used sanding machine, in very good condition Net price: 12,500 PLN Net price: 2,970 EUR (exchange rate 4.2 EUR) (Prices may change in case of significant fluctuations)

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm - Belt: 300x1900 mm From above: Cgodpfxjx Swu As Afnjn - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, mileage: 269,454 km, power: 100 kW (135.96 HP), first registration: 06/1984, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 07/2026, color: silver, gearing type: mechanical, number of seats: 2, loading space volume: 58 m³, loading space length: 8,450 mm, loading space width: 2,200 mm, loading space height: 3,130 mm, Equipment: parking heater, Vehicle number for customer inquiries: 154 ----Additional Features * Preparation for trailer coupling * Parking heater via roof hatch * Suspension: leaf/air * Wheelbase: 4,900 mm * Cargo area dimensions: L: 8,450 mm W: 2,200 mm H: 3,130 mm * Frame height: 870 mm * Payload: 3,290 kg ----Special Equipment * Basic color: Silver * Upholstery: Fabric * Air brakes * Power steering * Partition wall with rear window * Radio CD / USB / AUX * Winter tires * Spare wheel * Rotating beacon ----Technical Data: * HSN/TSN: * 5-speed manual gearbox Cgjdpfx Aeya R I Dofnjn * Suspension: leaf/air * Wheelbase: 4,900 mm * Cargo area dimensions: L: 8,450 mm W: 2,200 mm H: 3,130 mm * Frame height: 870 mm * Payload: 3,290 kg * Tire size: 215/75 R17.5 * Tread depth: approx. 50–60% ----German vehicle! * €6,850 §25a VAT not deductible. * TÜV (Inspection/Emissions) valid until 07/2026. * For export to non-EU countries or within the EU, a security deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible – please ask for your individual quote! * We gladly accept your used vehicle in part exchange! * Financing/leasing possible, even in difficult cases. * This description serves for general identification of the vehicle only and does not constitute a legal warranty. * The information provided does not claim to be complete. All specifications/descriptions/images are non-binding and do not constitute guaranteed characteristics. * We accept no liability for errors or obvious mistakes. * The buyer is responsible for independently inspecting the vehicle’s condition and equipment prior to purchase. * Price changes, typing errors, mistakes, and prior sale reserved. * Dear customer, please understand that due to the vehicle’s age and mileage, we prefer to sell to businesses or dealers. Thank you. * We speak: * Greek / Miláme Elliniká Tel: +49.162.6567750 * Russian / My govorim na Russkom Tel: +49.171.2767737 * WhatsApp/Viber: Tel: +49.162.6567750 * E-Mail: * Internal number: 154

Condition: new, empty load weight: 135 kg, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, permissible axle load (axle 1): 750 kg, loading space length: 3,600 mm, total length: 4,645 mm, total width: 1,754 mm, suspension: other, tire size: 155/70 R13, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2025, Single-Axle Trailer 750 kg (Payload approx. 600 kg) For jet ski transport or boats up to 3.6 m in length Manufacturer: Thomas Trailers BT-750-JET Brand-new trailer, 2-year manufacturer's warranty First registration: 3 years TÜV 100 km/h road approval* Registration documents (COC certificate and 100 km/h manufacturer's certificate) Available immediately! Financing available! Delivery at an additional charge! Welded, hot-dip galvanized frame Paint finish in ANTHRACITE GREY KNOTT rubber suspension axle, adjustable position WPS version – waterproof and maintenance-free wheel hubs Tyres 155/70R13 on steel rims Padded support boards, 180 cm length, adjustable KNOTT strap winch, adjustable 4 lashing eyes, adjustable position Jockey wheel 13-pin electrical connection LED lights, side hinged, waterproof Cgedpfxox Uq Dis Afnen LED position lights white/red Plastic mudguards Technical data: Gross vehicle weight: 750 kg Unladen weight: approx. 135 kg Payload: up to 615 kg Drawbar load: 50 kg Total length: approx. 4645 mm Overall width: approx. 1754 mm Width between mudguards: approx. 1355 mm Frame width: approx. 1235 mm Aluminium rims + EUR 200.00. Trailer available immediately. Delivery possible for an extra charge! Trailer also available in other colours. Offer price incl. 19% VAT. Unbraked boat trailers with 500 kg and 750 kg available straight away. Braked trailers from 1,300 kg to 2,500 kg also available immediately. Offer and further information on request: Office Tel. +49 (0) 2254/83718-20 Specifications subject to change, errors and prior sale excepted. Pictures may show optional equipment at extra cost. *Please observe national legal requirements regarding weight and speed restrictions.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23100408, number of ink cartridges: 4, color channels: CMYK, number of print heads: 1, paper width (max.): 800 mm, paper height (max.): 100 mm, number of feeding trays: 1, total length: 1,800 mm, total width: 1,000 mm, total height: 1,700 mm, space requirement length: 4,000 mm, space requirement width: 2,500 mm, input current: 16 A, input voltage: 230 V, Equipment: documentation/manual, Jedo Rollenco T4 Pass-Through Digital Printer, manufactured in the EU (Netherlands), year of manufacture 2023 - Fully functional, no defects, complete with all documentation - Only original HP inks used; prints are water-resistant and smudge-proof - Adjustable print color density (low, medium, and high settings) - Printer calculates printing costs (set base ink price and the printer calculates costs) — ideal for quick client quotations - Low usage; only 232,000 labels printed - Includes stainless steel work table on casters + adjustable stainless steel side table for finished products - Automatic feeder suitable for small products such as paper beverage coasters, small bags, pouches, and similar items - Complete Dell PC included, with Windows 10 and RIP Navigator software for graphic preparation - Graphics are loaded to the printer in PDF format using the included RIP Navigator software - Only prints on absorbent materials: paper, cardboard, wood, cotton. Does NOT print on plastics or other non-absorbent substrates - Suitable for printing on paper pouches, paper bags, paper coasters, napkins, boxes, food packaging, catering packaging, pizza boxes, paper fan blanks (die-cuts) for paper cups, cotton bags, and similar items - Maximum product height: 100 mm (adjustable); individual product settings can be stored in a library for quick recall - Maximum print width: 297 mm - Maximum product width: 800 mm Cgedpfeyaqrvex Afnsn - Maximum product length: 1,500 mm - Detailed specifications available in the attached PDF file Standard print speed is approximately 1,000 pieces per hour. Speed is adjustable: print simple logos quickly or complex graphics at a slower pace. I can provide basic training, a live demonstration, and further consultation if needed. The printer is very easy to set up and operate. Price includes EU-wide delivery or shipping to the Port of Hamburg. If you have any further questions, please do not hesitate to ask.

Year of construction: 1998, condition: good (used), Pass-through spindle oil cooler Fabr.SCHMIPKE Type:DK34-V/SO Bj.1998 Goods to CNC BAZ Verbaut. Cgjdpfed Nmnuox Afnen 2.Piece of forgo price each. Piece. Building mass: L1.4m B0.5mH1m Gewicht.ca.250kg.

Condition: used, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 05/2020, next inspection (TÜV): 03/2027, suspension: other, color: grey, gearing type: mechanical, Data for trailer: TPV boat trailer, first registration: 27.05.2020, 2 axles, permitted total weight 2,700 kg. Data for Draco 2100 SC V8 cabin cruiser: Year of manufacture 1979, 147 kW, 660 operating hours, petrol, GRP material, Volvo Penta AQ200 V8 engine. Length 6.20 m, width 2.12 m, comes with all extras, including weather canopy and complete full cover. FOR US, CONDITION AND OVERALL FEELING ARE DECISIVE, PRICE COMES SECOND. The boat trailer can only be purchased together with the boat for EUR 14,999.00. The boat description and pictures can be found on our website under Utility Vehicles. Impeccably maintained and immediately ready for use. Regarding the mileage of 660 operating hours: this value is only read off, as the total running time can unfortunately no longer be verified. //TRADE-IN, PART EXCHANGE OR FINANCING OF YOUR VEHICLE, AS WELL AS LOANS, POSSIBLE! All details without guarantee.* More offers can be found on our website. The description and specified data do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership upon purchase of the vehicle is binding. Subject to errors and prior sale! Cgedpewtfn Tefx Afnsn

Condition: used, maximum load weight: 8,000 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/1983, next inspection (TÜV): 04/2026, loading space length: 12,100 mm, loading space width: 2,150 mm, total width: 2,150 mm, According to our "General Terms and Conditions of Business" and without any warranty or guarantee, we are pleased to offer you the following vehicle, subject to prior sale, errors, and typographical mistakes, on a non-binding basis until conclusion of contract: Vidal, Herbert 2-axle boat trailer First registration: 01.07.1983 Permissible gross weight: 10,000 kg Unladen weight: 2,000 kg Payload: 8,000 kg Length (extended): 12,100 mm Width: 2,150 mm Loading height: approx. 30 cm TÜV valid until: 04/2026 German registration documents Gooseneck Tyres: 8.25R15TR approx. 70% tread remaining 2 axles Rotating beacon rear Cross beams & blocking wood Telescopic light bar from approx. 10,000 mm to 12,100 mm Transport up to 40" boats 4 x side guards for support Floor open in the center Front and rear extension marker boards, extendable and illuminated Good general condition (without boat) Cedpfxox Hb Uvo Afnsgn Price: € 8,999.99 (net) All information is without guarantee or warranty of any kind. Our "General Terms and Conditions of Business" apply. Legal venue for both parties for disputes up to a value of €50,000.00 is the District Court of Ludwigslust; for higher values, the Regional Court of Schwerin. Subject to errors, mistakes, and prior sale.

Condition: good (used), Winterhalter GS 502 Basket Pass-Through Dishwasher The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. You benefit from a comprehensive hygiene concept with a deep-drawn tank, surface heating elements, and a sieve system. Thanks to its powerful cleaning action, Winterhalter guarantees hygienically clean results, even with heavy soiling. The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. You benefit from a consistent hygiene concept with a deep-drawn tank, surface heating elements, and a sieve system. Thanks to its powerful cleaning action, Winterhalter guarantees hygienically clean washing results, even with heavily soiled items. The Winterhalter GS 502 basket pass-through dishwasher offers all the essential features a basket pass-through dishwasher should have. Technical Data: Csdpfxexuq Aio Afnsgn Theoretical output: 60 baskets per hour Dimensions (width x depth x height): 635 x 749 x 1469 (hood open 1932) mm Infeed height: 420 ± 5 mm Working height: 850 mm Basket dimensions: 500 x 500 mm Tank capacity: 42 l Rinse water consumption per cycle: 2.4 l Tank temperature: 60°C Boiler temperature: 85°C Required water pressure: 1 bar Total connected load with hot water connection > 40°C: 9.5 kW Total connected load with hot water connection < 40°C: 15.5 kW Standard features of the Winterhalter GS 502: One-button operation with color coding Integrated rinse aid dispenser (including suction lance) Built-in special detergent dispenser Covered heating element Drain pump Hygiene features: 4-stage lye filtration (filter cassette, pump filter, surface filter, Mediamat), self-cleaning program. The boiler has a thermal cut-out to ensure the required rinse temperature. Program starts by closing the cover Double-walled cover Display panels (e.g., for dosage, water treatment, etc.) Spray water protection IPX5 Connection cable 400V3N ~, 50 Hz Inlet and outlet hoses Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), CNC-drilling and dowel insertion machine HOMAG WEEKE MOD ABD050 OPTIMAT for horizontal drilling/drilling and doweling. The machine can be used as a stand-alone machine or in connection with CNC-machining center. Realization: - ABD 050/12 Technical data - workpiece length Codpfxjrlngks Afnsgn - ABD 050/12: 20 - 1,250 mm - workpiece width: 50 - 800 mm - workpiece thickness: 10 - 60 mm Equipment features - high-speed dowel and spindle drilling aggregate - vibrating conveyor for automatic dowel loading of standard dowels (8 x 30/35 mm) - lateral anchoring and central stop pneumatically lowerable - manually adjustable tensioning cylinder in length and thickness for workpiece clamping - ABD 050/12: 4 tensioning cylinder - glue - low pressure pump - space occupation for up to 4 workpieces

Condition: excellent (used), Year of construction: 2013, HOBART INDUSTRIAL DISHWASHING MACHINE / HOOD-TYPE DISHWASHING MACHINE WITH THROUGH-HAND OPENING Made entirely of stainless steel With a 1.45 m long side sink for pre-washing Will be completely overhauled Dimensions: Overall length = 4.35 m, depth = 0.85 m, machine height = 2.00 m, and with the hood open, 2.90 m Please call for further questions Thank you in advance Cgjdpfoc Ur Iajx Afnen Connection: 32 Ah

Condition: new, functionality: fully functional, machine/vehicle number: 364290, Year of construction: 2022, conveyor belt length: 4,500 mm, conveyor belt width: 1,400 mm, infeed height: 55 mm, infeed width: 1,460 mm, TECHNICAL DETAILS Use: Continuous furnace for medical technology Stainless steel housing (LxWxH): 3,750 x 1,720 x 675 mm Surface conveyor belt (LxW): 4,500 x 1,400 mm Conveyor system Conveyor belt height: 1,050 mm Openings belt inlet/outlet (WxH): 1,460 x 55 mm Free area belt inlet: approx. 250 mm Free area belt outlet: approx. 400 mm Conveyor belt operation: Cyclic operation Loading and unloading is carried out using robot handling and Profinet communication. MACHINE DETAILS Dimensions including belt and substructure (LxWxH): 4,500 x 1,720 x 1,510 mm Substructure made of stainless steel profile tube, height adjustable: ± 30 mm EQUIPMENT - Infrared heating fields for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel substructure for easy transport - Mechanically lockable service doors with viewing window - Control panel attached to the left side of the inlet - 6 service doors with viewing window (mechanical locking) - 2 exhaust air nozzles at the top (Ø 82 x 105 mm) - Traceability is ensured via the OPC-UA interface. HISTORY Cedjv Akfqspfx Afnogn This oven was planned for a clean room area of a fully automated production line for the production of rapid corona tests and tests to detect multi-resistant hospital germs.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: A00.5392, total length: 10,600 mm, total width: 2,680 mm, total height: 3,190 mm, input voltage: 230 V, power: 45 kW (61.18 HP), Markert continuous washing system for washing and drying parts (e.g., metal cleaning) - Fully functional - Year of manufacture: 2000 - Designed for washing parts in baskets - Suitable for use with alkaline or neutral cleaning agents - Drying via circulating air at 20°C Cedpfxjxb Dcvo Afnjgn - Exhaust air managed by steam condenser, 4500 m³/h Scope of delivery includes: 3 folders with technical documentation, operating manuals, drawings, etc. (all original from Markert) Please submit a purchase price offer for the machine.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 638/2024, Proving chamber for 9 trolleys (max 650x1070x1930mm) with pass-through doors, 60 mm thick panel covered with stainless steel. 3x3 trolley arrangement. Double-leaf doors. Cgjdpfjv Iv H Rjx Afnen Drawing and sample photos from another implementation

Condition: used, Large: 250 – 15 SC 10 RIM 7.0 Small: 18 x 7 – 8 SC 10 RIM 4.33R Cgodpfx Afjv Rmrcjnon Set of forklift tyres / complete forklift wheels suitable for STILL type EFG 3.0/6004.

Condition: used, Year of construction: 2009, machine/vehicle number: SCIAC45, Used Rinsing Machine Kompass SK481 8000 bph Used Rinsing Machine Kompass SK481 8000 bphGeneral Features of the Used Rinsing Machine Kompass SK481 8000 bph The Used Rinsing Machine Kompass SK481 8000 bph rinses bottles with a diameter of 45 mm and delivers a nominal output of 8000 bottles per hour. Kompass manufactured this machine in 2009 to serve medium-speed bottling lines. In particular, the SK 481 model offers a compact, efficient solution for plants that prioritize line compatibility and consistent performance. As a result, it suits both new installations and retrofitting projects.This unit is configured to work specifically with 0.1275-liter PET bottles, making it ideal for producers handling small-format plastic containers. Operation and Mechanical Configuration of this used rinsing machine This rinsing unit rotates counterclockwise, while bottles enter from right to left. Therefore, the machine aligns easily with conventional conveyor systems. Moreover, the mechanical assembly includes 32 grippers that firmly secure each bottle during the rinsing phase. The Used Rinsing Machine Kompass SK481 8000 bph performs a single rinsing treatment using fixed nozzles and water as the washing medium. Consequently, it ensures minimal complexity in maintenance and operation. Processable Products and Application Versatility Codpfx Afoyhbwrjnogn The Used Rinsing Machine Kompass SK481 8000 bph handles various products, including alcoholic beverages, juices, syrups, oils, soft drinks, spirits, wine, and water. Thanks to this broad compatibility, the machine supports production lines that frequently change product types. In addition, operators can use it across multiple beverage categories without major mechanical adjustments. Furthermore, the consistent treatment method ensures uniform results regardless of the processed liquid.Its adaptation to 0.1275 L PET bottles ensures compatibility with compact beverage formats, commonly used in specific product lines or promotional packaging. Electrical and Dimensional Specifications of this used rinsing machine The machine operates at 415 Volts, with a frequency of 50 Hz, and consumes 3.0 kW of electrical power. These parameters match industry-standard infrastructure. Additionally, the machine’s footprint — 1850 mm long, 2250 mm wide, and 2100 mm high — fits comfortably within most medium-sized bottling halls. Therefore, engineers can plan the layout with minimal disruption. Likewise, these dimensions support integration with adjacent modules in the line. Automation and Control System

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 500 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Profile type: CS300-2.0 material thickness: 2,0 mm length: 400 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg Csdpfeib H D Eex Afnogn 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: as good as new (ex-display), Suitable for shelf rack: Shelving system: SSI Schäfer Type: R 3000 Included in delivery: 01x crash barrier, II. choice Material color: yellow/ black/ galvanized total height: 400 mm total depth: 180 mm clear width: 400 mm Consisting of respectively: 01x CS Sigma profile, II. choice Material color: sendzimir galvanized profile dim.: 300 x 75 x 15 mm Cgsdpfx Afsib H Dtenon Profile type: CS300-2.0 material thickness: 2,0 mm length: 300 mm 02x L - collision protection corners, new material color: yellow/ black according to DIN standard total height: 400 mm leg length: 170 x 170 mm material thickness: 5 mm Weight/piece: 6,10 kg 08x screws: M12 08x nuts: M12 16x washers: M12 The crash barrier is delivered completely pre-assembled.

Condition: used, System: Chamber filter press, used Type: Passavant Application area: sludge dewatering, gravel washing, tunnel construction Design: bridge rail Year of construction: 1995 Filter plate size: 1200x1200 Number of plates: approx. 94 plus head and end plate, final expansion +13 Cjdpfx Afswqyfnsnsgn Filter plates: PP Filter cloths: optionally available in accordance with the medium Filter area: approx. 270 m2 Press volume: approx. 2480 dm3 Filter pressure: approx. 15 bar Pump technology: optional Washing system: No Miscellaneous: used Application: sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for solid-liquid separation Purchase or rental Rental or purchase. Inspection of the systems by arrangement at our works.

Condition: excellent (used), Plant: Chamber filter press used type of construction: head guided filter plate format: 1500x1500 mm filter plates: 70 pieces / final extension 100 pieces Filter plates: PP Cjdpfx Afeg S I Smjnsgn Filter cloths: optionally available in accordance with the medium Throughput: 20-25 m3 per batch Filter area: 242 m² Press capacity: approx. 50 dm³ Filter pressure: 15 bar Closing pressure: 400 bar Plate transport: automatic Motor voltage: 380 V Control voltage: 230 V - 24 V Filling pump: optional available

Condition: used, System: Mobile chamber filter press, used Type: Passavant Area of application: Sludge dewatering Filter plate format: 1500x1500 Number of plates: Optionally with 77 cast iron plates or 88 PP filter plates Filter cloths: Optionally available depending on the medium Filter area: approx. 310 m2 Press capacity: approx. 43,000 dm3 Filter pressure: approx. 15 bar Csdpfx Ajwimmcsfnogn Application: Sludge treatment, dewatering system. Filter presses are discontinuously operating pressure filters for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the systems by arrangement.