Used Peddiworker 800 for sale (8,386)

Condition: used, Year of construction: 1974, table diameter mm workpiece height mm number of wheels 2 total power requirement 8 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m Psdpfx Ageub Alzeksgn

Condition: used, Year of construction: 1975, table diameter mm workpiece height mm number of wheels 2 total power requirement 11 kW Pgedpfxjub Al Is Agksn weight of the machine ca. 4,2 t dimensions of the machine ca. m

Year of construction: 2008, condition: ready for operation (used), Mains voltage: 3x 400V, 50Hz, fuse protection: 125A slow-blow, maximum connected load: 83kVA, cutting current at 100% duty cycle: 80 to 300A, output voltage: 112 to 200V, rated output current: 300A, duty cycle: 100%, maximum input current: 120A, protection class: IP22, insulation class: F, cooling method: AF (air cooling), no-load power consumption: 1.3kW, maximum operating pressure: 0.55MPa (5.5bar), impulse withstand voltage (Up): 17kV, plasma torch: PB-S80 W, compatible plasma gases: O₂, air, Ar, H₂, compatible swirl gases: air, N₂, length: 1375mm, width: 870mm, height: 1505mm, weight: 556kg. Inspection on site is possible. Pgsdezhnucepfx Agksn

Condition: new, Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral The spiral rounder uses a spiral to shape the dough Pedpeuuc Nzofx Agkogn The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW

Condition: new, Setting total time Frequency speed control Automatic unloading Pjdpfxef Sabye Agkegn Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 100cm Width: 185cm Height: 160cm Electric power: 2.2kW Delivery time: After the payment, from the stock

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication Pjdezfwxxjpfx Agkjgn - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical Data Year of manufacture: 2006 Pjdpox Up Utefx Agkegn Clamping Unit Clamping force: 8000 kN Max. platen size: 1520 mm Clear tie-bar distance: 1170 mm Min. mold height: 700 mm Max. mold height: 1300 mm Max. platen opening: 2300 mm Max. opening stroke/mold height: 1000 mm Ejector stroke: 300 mm 1st Injection Unit Screw diameter: 105 mm Shot volume: 4160 ccm 2nd Injection Unit Screw diameter: 90 mm Shot volume: 3050 ccm

Year of construction: 2026, condition: like new (used), functionality: fully functional, overall weight: 49 kg, total length: 600 mm, total width: 800 mm, total height: 990 mm, machine/vehicle number: 2026, Table Trolley TW 800 Stainless steel table trolley Worktop on top Shelf below Rugged construction Pedpfsy Ac Ucox Agkjgn Dimensions: 800 x 600 x 990 mm (W x D x H) Mobile with 2 braked castors As new condition

Year of construction: 2008, condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min diameter 800 mm Podpfx Aswgi Epsgkjgn voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm Pgjdsg S R Twspfx Agken ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: like new (used), Year of construction: 2025, functionality: fully functional, grinding width: 550 mm, grinding height: 580 mm, distance table to spindle center: 680 mm, table load: 1,000 kg, table width: 800 mm, grinding wheel width: 57 mm, spindle speed (max.): 1,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, CNC Rotary Table Surface Grinding Machine ROSA ERMANDO CNC 800 – LIKE NEW (2024) For sale is a state-of-the-art CNC rotary table surface grinding machine, ROSA ERMANDO CNC 800, manufactured in 2024 and in like-new condition. The machine comes from an industrial application (Syntegon) and has been used very little. It will be available and ready for operation from January 2024. Thanks to the Siemens Sinumerik ONE control system and the extensive equipment, the system is ideally suited for precise grinding operations in tool, mold, and machine manufacturing. ⚙️ Technical Data Manufacturer: ROSA ERMANDO Type: CNC 800 Year of Manufacture: 2024 Control System: Siemens Sinumerik ONE (Rosa System 9 Touch) Axes: 3 Travel: X: 550 mm Y: 680 mm Grinding Wheel: 400 x 57 x 127 mm Spindle Power: 11 kW Max. Speed: 1500 rpm Spindle Condition: new 🧰 Equipment / Accessories ✅ Electro-permanent magnetic chuck Ø 800 mm ✅ Adjustable magnetic force (20–100%) ✅ Demagnetization device ✅ Coolant system with band filter (100 l/min, 350 l tank) ✅ Additional grinding wheel flanges Podpfjzhnbpsx Agkogn ✅ Teleservice / Remote diagnostics ✅ CE marking Important Conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany or the EU • Inclusion of a dual-use statement in the purchase contract (legally required) Sales / Transfer Conditions: • Dismantling, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used. If you are interested, we look forward to hearing from you so that we can coordinate the further details directly.

Year of construction: 2016, condition: good (used), 1 used hot water parts cleaning system Manufacturer: Bio Circle Type: HTW II 800 Pedpfx Agszb Iyaoksgn Year of manufacture: 2016 Material: Stainless steel Electrically powered rotating basket Effective and cost-efficient Overall width: 1175 mm Overall depth: 1145 mm Height with closed lid: 1380 mm (with exhaust bend) Height with open lid: 1780 mm Inner diameter of the mesh basket: 800 mm Max. usable height: 400 mm Max. payload: 350 kg Tank capacity for cleaning fluid: 150 liters Electrical connection: 6 kW Voltage: 400 volts Frequency: 50 Hz Flow rate of the cleaning pump: 4.8 m³/h Spray pressure: 2.5 bar Electric heating in the washing tank: 5.3 kW Treatment temperature: 10°C to 85°C Load capacity: 150 kg Fresh water connection: 1/2″ Drain valve: 1 1/4″ Weight: 330 kg

Condition: ready for operation (used), AEG / Schneider Modicon AS-B872-100, 800 I/O, analog output 4-20mA, 4 channels, serial no. 20032987, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Pgodsi D Tt Topfx Agksn

Condition: ready for operation (used), Heidenhain ROD 800 36000 H5 angle encoder. 219 845 21, SN: 2133393B, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Pgjdpfx Agox Er Sveken

Condition: ready for operation (used), Northrop Grumman 800-336-2112 / 609818X112 General Purpose Inductor, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Podpfxsi D I U De Agkegn

Condition: ready for operation (used), Festo ELGA-TB-RF-70-800-0H+MF / 1371245 toothed belt axis, used, in good condition, 100% functional, delivery as per photos. Pgjdpfx Aox Ernkjgkjn

Condition: ready for operation (used), Omron Adept eCobra 800 industrial robot ID-SN: 595-00114, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packaging and shipping! Pjdpfjx Dw Rrox Agksgn

Condition: ready for operation (used), Maho milling head from Maho 800 C, used, normal signs of use, 100% operational, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packing and transport! Psdpfx Agox Et Hnokegn

Condition: ready for operation (used), Viscotherm main unit EMS Z.Nr. 3-800. 165 F.Nr. HW 2.04, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Pgsdpoxaifysfx Agken

Condition: ready for operation (used), Thomson Neff linear drive Wiesel Powerline, travel 800 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Pjdpfoxah Uasx Agkogn

Condition: ready for operation (used), B&R 5AP820.1505-00 Automation Panel 800 with 1-00 keyboard + 3-03 keyboard extension, used, in good condition, 100% functional, scope of delivery as shown in photos. Pedpox Equ Nefx Agkogn

Condition: ready for operation (used), Maho turntable for MH 800 C without motor and encoder - Height: 59cm / Width: 61cm / Length: 90cm, used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Podpfetvct Hsx Agksgn

Condition: ready for operation (used), Heidenhain ROD 800 36000 / K7 angle measuring device. 219 845 21, serial number: 2829928B. Professionally and completely overhauled and tested, with a 6-month warranty. 100% functional. Scope of delivery as shown in the photos. Pjdskxh Dhjpfx Agkegn

Condition: used, Ekomex Vacuum Tumbler is a professional vacuum tumbler designed for marinating, curing, and massaging meat products. The vacuum process ensures even marinade absorption, improves product texture, and enhances the overall quality of the finished product. The 800-liter drum capacity makes it suitable for medium and large-scale production facilities. Adjustable drum speed allows the process to be adapted to different raw materials and production requirements. Manufactured from stainless steel, the machine is designed for reliable operation in meat and food processing environments. Technical Specifications Manufacturer: Ekomex Model: MV 800 Machine Type: Vacuum Tumbler Podpfezgn U Tjx Agksgn Drum Capacity: 800 L Recommended Load Capacity: Up to 50% of volume Drum Speed: 1–8 RPM Dimensions: 2200 × 1500 × 1600 mm Weight: 700 kg

Condition: like new (used), Year of construction: 2020, machine/vehicle number: CL5058002, functionality: fully functional, operating hours: 9,000 h, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, oil tank capacity: 800 l, overall weight: 800 kg, Equipment: CE marking, Specifications of the MULLER Combiloop CL5-800 150 high-pressure unit and filtration system, 800L/27L, 150 bars: - 800L capacity with level sensor - Centrifugal pump for supplying dirty fluid - Self-adjusting HP Eco+ pump, 150 bar/27L/min (5.5kW) - 8 controllable outputs, including one output for counter-spindle rinsing - 1 low-pressure pump with constant flow rate, 100L/min, 5 bar (1.2kW) - 1 low-pressure pump with constant flow rate, 80L/min, 3.5 bar (1.9kW) - Automatic 40μ filtration with automatic control and clogging detection - Complete high and low-pressure filtration - Pressure control for the part program - Whole oil (recommended viscosity for machining: 15-22 mm²/s; for deep drilling: 5-8 mm²/s) - Includes: EURO COLD RCFO 95t cooling unit Psdpfx Agjzhi Nneksgn - Excellent condition (very little use)