Used Pellets for sale (256)

Condition: excellent (used), functionality: fully functional, used deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 decks, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood deck ovens Crosta 3.18.20, each 3 decks (with pellets), with 1 loading and unloading system Wachtel Comfort Lader (with Wachtel WinServer), year of manufacture 2016, in bakery condition, for self-dismantling, worked flawlessly until the closure of the bakery Gjdpex E Df Iofx Ag Tobg

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Gedpfx Agsvzub Hj Tobg Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   Gjdpjghbkyjfx Ag Tsbg The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners

Condition: used, Year of construction: 2011, functionality: unexamined, For sale: container with extraction augers. The container was used as a buffer in a straw pellet manufacturing facility. Container dimensions: Gbedpfxowy T R Ns Ag Tsg Height: 7750 mm, Width: 2150 mm, Depth: 3140 mm, Rail height on container: 900 mm, Container capacity: approx. 40 m3, Discharge window size: 1000x350 mm 3 extraction augers, each 1.1 kW The container has been disassembled and is ready for transport. For more photos and details, please contact me. Machines available for inspection in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Year of construction: 2008, condition: good (used), strand pelletizer Scheer SGS 100-E4 Gsdehfmrtjpfx Ag Tsbg function tested Immediately available

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, total height: 60,000 mm, input current: 250 A, compressed air connection: 6.2 bar, input voltage: 380 V, warranty duration: 24 months, Equipment: documentation/manual, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw Godpfxjw U Ugmo Ag Tebg 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: new, Year of construction: 2024, functionality: fully functional, Professional new pellet mill. It is possible to see how it is working in warehouse Lithuania. Full set: - Full automatic control cabinet. - Air conditioning. - Automatic bearing lubrication system. - Main engine 132 kw. Raw Material Proce:Grass, Rice Husk, Wood Sawdust, Biomass, Straw, Cotton Stalks. The motor is directly connected to the gear box to increase the conversion rate of kinetic energy and improve production efficiency. Output (kg/h):1500 - 2000 kg/h Voltage:3phases, 380V ,50hz Dimension(L*W*H):2600x1300x2300mm Certification:CE, ISO Gsdpsvyzmtefx Ag Tebg Price it is with roller and new ring die 6mm for sawdust.

Condition: like new (used), Year of construction: 2014, NEVER USED !! Pellet production line Brand - ANDRITZ YOM - 2014. Gbodpfx Agex Hqcvj Tsg Please contact us for more details. Thank you!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Fresenius Kabi Lovo Automated Cell Processing System PN: 6R4900 Condition: Used in excellent condition. PROCESS FAST. MAXIMIZE CONTROL. Only Lovo delivers automated, functionally closed cell processing through spinning membrane filtration. Product Features: The Lovo Cell Processing System is a benchtop cell processor that automates labor-intensive tasks of washing and concentrating white blood cell products. Using spinning membrane technology, Lovo allows for non-pelletizing cell concentration and reduces the need for manual re-suspension. Additional Features: Gedpfxeq Avtgj Ag Tjbg Processing volume range: 1 mL to 21 L Operator-defined processing parameters including levels of supernatant removal and final product volume. The LOVO system is for laboratory use only. Cells processed on this system are not intended for diagnostic purposes, for direct transfusion, or for use in the production of a therapeutic product(s) or vaccine(s) for clinical use, unless the user has obtained advanced regulatory clearance or approval from the appropriate regulatory agency. Cell types Fresh, cryo-preserved, and culture-expanded white blood cells, including, but not limited to, leukapheresis CD34+ cells, CAR T-cells, TILs, NK cells, and MSCs Volume range Source Up to 22 L Output* 50 mL – 50 L Wash-out range Up to 99.9999%* System components • 73 lb, 35.3” x 17.6” x 24.5” (W x D x H) benchtop instrument • Single-use processing kit with spinning membrane module We have two units in stock, both fully functional. Password need to be changed. Please check out our other listing as well.

Year of construction: 2011, condition: excellent (used), functionality: unexamined, machine/vehicle number: 24, For sale: Mixer – Raw material agitator from a pellet production line. Thanks to the mixer, the material supplied to the pellet mills is homogeneous. Line capacity where the agitator was used: approx. 8 t/h Mixer dimensions: External length: 6150 mm, External width: 1760 mm, External height: 2740 mm, Internal length: 5000 mm, Internal width: 1490 mm, Internal height: 1750 mm, Ribbon diameter: approx. 1400 mm, Gjdpfowxatbsx Ag Tebg Motor power: 22 kW, Agitator price: 25,000 Euro, We also offer a bag filter for the mixer, as shown in the production line photos. Filter price: 7,000 Euro, The machine can be inspected in: Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Gsdpfx Aow H Adreg Tobg

Condition: new, Year of construction: 2024, operating hours: 12 h, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw Gjdsw Ulp Eepfx Ag Tjbg 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Belt width: 500 mm Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Gjdoxz Tg Dopfx Ag Tebg Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Incl. infeed hopper (charging hopper) Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Year of construction: 2017, condition: reconditioned (used), 2 x Entrade 199kw systems are available to purchase, each approximately 145kw of heat, and 50kw of electric Two boilers available fully reconditioned. These do NOT include engines Ideal for reducing high energy costs. Gbodpfsp Ayqijx Ag Tsg Both systems available to run on woodchip or wood pellets

Condition: like new (used), functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The pellet press has been refurbished in 2024. The production line includes: - Amandus Kahl C35-780 Pellet Press with hydraulic nut Gbjdpexykzpofx Ag Tjg - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - 4 additional die's of 6 mm - 60 liters of extra synthetic oil List of refurbished parts: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Condition: used, Year of construction: 1988, type of input current: three-phase, power: 110 kW (149.56 HP), Used Amandus Kahl C35-780 Pellet Press Hydraulic nut with pump and hand pump 4 roll head Gbedpfjqwyrwox Ag Teg 5 rollers head 5 new rollers New die and used die Various spare parts

Condition: used, Year of construction: 2016, cooling capacity: 301 kW (409.25 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, volume flow: 359 m³/h, total width: 1,420 mm, total length: 5,400 mm, total height: 2,300 mm, Equipment: compressor, Industrial chiller for technology water GWK Sklc 260.1 Gas: R134a Year: 2016 Capacity: 301 kW Circular pump is not included. Check out our other products.(Re-pelletizing line, Shreddr, grinder, washing-line) Gedpfxox Dddre Ag Tebg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Pellet plant – currently still in operation – inspection possible Godpfxow Hrg Ns Ag Tebg - Raw material bunker, 4 cubic meters, with discharge into a shredder, suitable for wood chips size ≤ G30 + conveyor belt - Shredder, 22.5 kW, with sound insulation cabin - Material bunker, 4 cubic meters, with LP series discharge conveyor belt - Pellet press LP22 (Integrated central lubrication, water pump, and temperature monitoring ensure maximum operator convenience) - Screening unit with conveyor for LP22 (including level sensor for BigBag with swiveling bracket and sensor cable for connection to pellet press LP22) - BigBag frame Vario 1.5 m³ - Bagging unit suitable for Vario BigBag system For further information, please feel free to contact us.

Condition: good (used), Year of construction: 2025, Requirements: - Material must be free-flowing (less than 18 mm) - Material must be pure, with ash content below 1% ATRO Caution concerning: sand, stones, and mineral content - Material is compacted by pressing tongs Gbsdsfbb Arjpfx Ag Tjg - Material must be dry, maximum 15% ATRO New: Innovative combination of briquette and pellet Optional upgrades available: Plant engineering / mütek Systemtechnik: - mütek Shredder MRZ size-reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - All types of control system integration - Semi-automatic packaging solutions + 24h operation possible + Compact design + High energy efficiency thanks to innovative hydraulics + Achievable briquette density of up to ≥ 1 kg/l *Details after testing Functionality: The machine features a silo with agitator. Each of the four corners of the storage silo contains a vertical screw which compacts the material downward into the press chamber. The machine operates with two cylinders, each pressing in both directions (either as the cylinder moves forward or backward). This produces four briquette outlets, each generating six individual briquettes. *Ideal for automatic feeding of the heating boiler Format: Ø 30 mm Throughput capacity: up to 310 kg/h maximum Motor power: approx. 27 kW (total) Dimensions: 3.1 x 2.3 x 2.2 m Weight: 3.55 tons Your advantages: Compact briquette/pellet format enables fuel feeding of industrial firing plants via screw conveyor Fully automatic 24h operation possible High energy efficiency Briquettes/pellets with consistently high quality and density For automatic feeding into industrial combustion systems Small to medium quantities of wood chips generated in various processing industries (especially wood, biomass, etc.) can be efficiently compacted. The small Ø 30mm format represents an attractive alternative. Unlike our conventional briquettes, these can be fed automatically into industrial combustion systems. In addition to wood, a wide variety of other materials can also be processed without issue (various types of biomass and agricultural residues).

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Beveling and Packaging Machine – Packtech AF-35 A professional solution for fast and precise packaging of bulk products. The Packtech AF-35 is a pneumomechanical vertical machine designed for weighing, dosing, and packaging bulk products in “pillow” type bags. It is ideal for packaging pellets, grains, salt, sugar, feed, fertilizers, and other free-flowing materials — even in large doses up to 50 kg. Thanks to its weight-based dosing system, the machine guarantees high accuracy (error 0.5–1%) and a wide operational range from 2 to 25 kg per portion. The machine operates fully automatically, requiring minimal operator intervention. The machine can work with loading conveyors, allowing automatic maintenance of product level in the hopper. Its construction meets ISO 12100:2010 safety standards, and all product-contact parts are made of stainless steel. Key Advantages of AF-35: - High efficiency – 1–5 cycles per minute depending on the product - Precise weight-based dosing for various bulk materials - Wide dosing range: 2–25 kg - Fully automatic operation with minimal supervision - Wide film compatibility through impulse sealing (PE, PP, laminates) - Robust construction – combination of carbon steel and stainless steel - Safety and compliance with ISO standards Technical Data: - Power supply: 400 V, 3.5 kW - Pneumatics: 6 bar, 500 l/min - Machine dimensions: 2900 × 1800 × 4600 mm - Weight: 960 kg - Film thickness: 20–130 μm - Max. roll width: 1050 mm Packaging dimensions: up to 600 mm length and 400 mm width Hopper capacity: 100 l Gbodpoxx Sdvofx Ag Tog Applications: - Food industry - Agriculture - Feed production - Chemical processing - Fertilizers and granulates - Pellets and solid fuels The price quoted is Net. Transport and installation at any location can be arranged for an additional fee. The machine is ready for operation. Immediate pickup available in Gdańsk.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, power: 110 kW (149.56 HP), Complete Refurbished Amandus Kahl C35-780 Pellet Press Production Line. The C35-780 pellet press itself has been recently refurbished with a full documentation of the all the new parts available, with one of them included in the pictures. The production line includes: - Amandus Kahl C35-780 Pellet Press - The Pellet Press has a new 110 KW engine - Electrical cabinet with emergency stop including complete electrical documentation - Conveyor belt - A sieve system that sieves the pellets and automatically cools them - Hydraulic nut - A roller head in perfect condition, - Electrical wiring included. - A feeding screw that brings the product to the Pellet Press - Dispenser system that automatically measures the number of pellets to release for e.g. a big bag. - 4 additional die's of 6 mm - 60 liters of extra synthetic oil Godpjxvp Rhofx Ag Tobg List of refurbished parts: - 7 new bearings - 2 new wear rings Dwjbngmhexd U Izsd Eed - 1 new air filter - 2 new oil seals - 1 new oilfilter - 1 new oil pump - 20 liters of 800/460 Syntethic Oil - 1 New Pressure Piece Main Shaft

Year of construction: 2025, condition: new, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Gbsdpfxswg R Rts Ag Tog

Year of construction: 2013, operating hours: 10,000 h, condition: used, functionality: fully functional, Recent 75 Extruder - Re-pelletizing line Austrian-made, designed by engineers who left EREMA. The manufacturer was later acquired by EREMA. First commissioning: March 2013 Current operating hours: ~10,000 hours Usage history: 2013–2018: operated in a polyethylene film blowing plant, with technological waste 2018–2020: operated in a recycling plant, with irregular utilization Gbsdpfox Ddatox Ag Tog 2020-2023: operated intermittently The line is for sale as a complete extruder, equipped with conveyor belts, and a metal detector. Materials processed by the extruder: LDPE, LLDPE, HDPE, PP, POM (According to the accompanying manufacturer's description, it is also suitable for granulating other materials.) COMPONENTS - With metal detector, - Large feed belt - Agglomeration unit - Stainless steel drum, diameter: 1000 mm - Drive motor: AC 55 kW Main parameters of the extruder Screw diameter: 75 mm Screw drive: 65 kW Consists of 4 separate motors that switch on depending on the load! Favorable energy consumption! L/D ratio: 35 D Variable screw speed Touchscreen control panel Double degasserer Double filter changer Head cutting section with shaking table Centrifuge Liquid cooler. Check out our other products.(Shredder, Grinder, washing-line...)

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Both machines tested. It is recommended to replace the neck bearing of the right machine. Gbjdsp T Twuopfx Ag Teg Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: used, functionality: fully functional, total length: 1,300 mm, total width: 700 mm, total height: 1,500 mm, overall weight: 160 kg, The GEA UM600 dumpling roller is an essential solution for food manufacturers wishing to guarantee uniform, standardized dumpling production. Designed to handle a wide range of products including meat, fish and poultry, as well as vegetarian options such as falafel and potatoes, this machine ensures exceptional consistency. Thanks to its stainless steel structure, it combines robustness and hygiene, two essential elements in production environments. What's more, the GEA UM600 stands out for its mobility, offering greater flexibility on the production line. It is also compatible with equipment such as the VM 400 corrugator, enabling seamless integration into different configurations. What's more, its ability to form pellets from 6 to 80 grams, combined with adjustable speed, meets a wide variety of production needs. All in all, this machine is a major asset for any company wishing to optimize the quality and consistency of its products. All stainless steel Meatball rolling machine Gsdpfxeu E R Eme Ag Tebg Width 600 mm For forming meatballs from 6 to ± 80 g Suitable for in-line forming (VM 400) Adjustable speed Mobile Dimensions (L x W x H): ± 1,300 x 700 x 1,500 mm.