Used Perforate for sale (919)

Condition: new, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. Lodjwv Tqbepfx Abnoac - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Ljdpfjx Iwfmex Abneac Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: used, functionality: fully functional, Dans cette offre, vous achetez un système de perforation d'occasion "GBC SteamPunch Ultra". État : Il s'agit dans cette offre d'un appareil d'occasion qui peut présenter des traces d'utilisation. (petites éraflures ou jaunissement). Le fonctionnement de l'appareil a été testé. Emballage et expédition : Ljdervhyzjpfx Abnoac Vous pouvez volontiers venir voir l'appareil pendant nos heures de bureau. Veuillez prendre rendez-vous à cet effet ! Un emballage résistant à la mer et une expédition dans le monde entier sont possibles sur demande ! Pour plus d'informations, vous pouvez bien sûr nous contacter personnellement.

Condition: new, empty load weight: 3,080 kg, maximum load weight: 11,320 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front wall galvanized steel, 600 mm aluminium drop sides foldable and removable, 3 stake pockets in the middle for 80 x 80 stakes, removable stakes, 6 x lashing brackets, outer frame with lashing eyes, reinforced gear support winch with load and fast gear, contour marking and side collision protection, mudguards and spray mist suppression, rear, , Surcharge for front wall grille 1.600 mm high (perforated plate), price: 1,400 Euro, , Surcharge for aluminum ramps load capacity per pair 9 t and 2 x folding supports rear, price: 1,800 Euro, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Laodjzcv Diopfx Abnec

Condition: ready for operation (used), Drum Screen Terra Select. 50 mm screen perforation Ledpfjvnmcvox Abnsac

Condition: new, SSI Schäfer PR 600 Longitudinal beam 2700 mm Pallet racking beam with a clear width of 2700 mm for three Euro pallets per pair of beams next to each other. The traverse can be loaded with up to 1500 kg per pair of traverses. Suitable for pallet racking system PR 600. For quick adaptation of your shelving or easy replacement The longitudinal beams guarantee a force-fit and form-fit connection with the shelf supports With welded-on 5-hook suspension brackets Height-adjustable in the 50:50 mm system perforation grid As a replacement for damaged shelf beams and for extending existing shelving systems. Technical data: Manufacturer: SSI Schäfer Truss type: TRV1-270-084-30CE Lodpfxswv Rvne Abnoac Truss length: 2700 mm Load capacity: 1500 kg per pair of trusses Height-adjustable at 50 mm intervals 5-hook suspension lugs Material: sheet steel Surface: painted Color: gentian blue RAL 5010 Profile: 80 x 40 mm Type: CE 80 Manufacturer order no., 334380 Scope of delivery 1 x longitudinal beam 2700 x 80 x 40 mm blue Suitable for almost all pallet racking with 50:50 mm system perforations e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion Further racks in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: new, SSI Schäfer PR 600 Longitudinal beam 2700 mm Pallet racking beam with a clear width of 2700 mm for three Euro pallets per pair of beams next to each other. The traverse can be loaded with up to 2600 kg per pair of traverses. Suitable for pallet racking system PR 600. For quick adaptation of your shelving or easy replacement The longitudinal beams guarantee a force-fit and form-fit connection with the shelf supports With welded-on 5-hook suspension brackets Height-adjustable in the 50:50 mm system perforation grid As a replacement for damaged shelf beams and for extending existing shelving systems. Technical data: Manufacturer: SSI Schäfer Truss type: TRV1-270-104-30CE Truss length: 2700 mm Load capacity: 2600 kg per pair of trusses Height-adjustable at 50 mm intervals 5-hook suspension lugs Material: sheet steel Surface: painted Color: gentian blue RAL 5010 Profile: 100 x 40 mm Type: CE 100 Manufacturer order no., 334750 Scope of delivery 1 x longitudinal beam 2700 x 100 x 40 mm blue Suitable for almost all pallet racking with 50:50 mm system perforations e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion Laedpfx Abowv Rrconjc Further racks in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Laodpsx Exatefx Abnsc Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: excellent (used), mileage: 285 km, power: 345 kW (469.07 HP), first registration: 05/2025, fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 510 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 66,000 mm, loading space width: 24,700 mm, loading space height: 10,000 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, seat heater, soot filter, trailer coupling, - Aluminium fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Differential lock - High beam - Low noise - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Particle filter - PTO (Power Take-Off) - Radio/multimedia system - Disc brakes - Sliding roof - Sleeper cab - Seat heating - Sun visor - Lane keeping assist - Stability control - Auxiliary heater - Warming automatic - Toolbox - Windshield - Additional steering axle Internal number for customer inquiries: 3-426 Volvo FH 460 6x2-4 Construction Platform Truck with Fassi or Palfinger Loader Crane, each with day registration. Available from €189,999 net, depending on crane type and size (subject to prior sale) Immediately available at a special price. Volvo FH 460 6x2-4 FH Globetrotter - Safety driver's cab Long distance specification with lower sleeper bunk Engine 13 l, 469 HP/345 kW, 2346 Nm, Euro 6 Step E Lajdpoy E Hu Sofx Abnsc I-Shift automatic transmission, 12-speed I-Shift drive modes: Standard, Performance, and Economy VEB+ Volvo Engine Brake Leaf/air suspension Trailing axle electrohydraulically steered and liftable Tyres FA + TA 385/65 R 22.5, Drive RA 315/80 R 22.5 Wheelbase 4,900 mm AHK ROCKINGER 400 G 150 Active safety package: ACC adaptive cruise control, driver alert system, lane change support, lane keeping assist LED main headlights LED rear lights Comfort driver's seat, air-suspended, heated, integrated seat belt Automatic climate control Auxiliary heater Coolbox with freezer compartment 33 l High instruments with digital, fully dynamic driver information display (4 views selectable) Traffic sign recognition (in conjunction with LSS-DW (lane keeping assist)) Size: 12-inch with chrome trim Second driver information display, 9" touch colour display And much more. Body: Modern construction material platform with pallet capability Platform dimensions L x W x H: 6600 x 2480 x 1000 mm Sideboards 1x split (2 flaps) per side with sideboard release, including sliding foldable steps Substructure: 45° perforated external frame as steel welded construction. KTL & powder coated and/or hot-dip galvanized Central lashing rail recessed in the direction of travel 4x work lights 1x toolbox Loader crane: Fassi or Palfinger Various crane sizes/types and configurations in stock. This is a non-binding offer. Subject to prior sale, errors, and changes. General Information Cab: Long-distance Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc GVW: 26,000 kg Axle configuration Brakes: disc brakes Front axle: tyre size: 385/65-22.5; steered; suspension: leaf suspension Rear axle 1: tyre size: 315/80-22.5; differential lock; suspension: air suspension Rear axle 2: tyre size: 385/65-22.5; lift axle; steered; suspension: air suspension Functional Crane: rear-mounted on chassis Body make: PAVIC Premium Construction Material Platform with Rear Loader Crane Condition Technical...

Condition: ready for operation (used), Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm Lodpowqr R Aofx Abnoac The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: used, maximum load weight: 2,590 kg, overall weight: 3,500 kg, axle configuration: 3 axles, first registration: 01/2024, loading space length: 4,800 mm, loading space width: 2,060 mm, loading space height: 30 mm, total width: 2,130 mm, total height: 870 mm, A21. GW26H346846 Internal / loading dimensions: 480 x 206 cm Payload: approx. 2590 kg Gross vehicle weight: up to 3500 kg Unladen weight: approx. 910 kg 3 braked axles Robust, fully galvanized chassis with V-drawbar Overrun brake and parking brake Steel frame and support rails made entirely of perforated plate, fully welded and hot-dip galvanized Transport platform: support rails made of LOHR perforated plate + central aluminum tread plate + additional reinforcement from plywood underneath the loading area Corrosion protection: hot-dip galvanized construction Manual winch Hydraulic hand pump tilting device Single-sided hydraulic cylinder for lifting and lowering Lodpfx Asxw Dy Hjbnsac Perforated support rails for load securing Side-folding rear lights for easy loading of the trailer Jockey wheel... and much more. Vehicle not refurbished Errors and prior sale excepted

Condition: used, maximum load weight: 2,739 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 06/2022, loading space length: 4,070 mm, loading space width: 2,070 mm, loading space height: 100 mm, total width: 2,160 mm, total height: 745 mm, A24. GW26G000233, * 100 km/h version with shock absorbers installed * Cleverly stowed, lightweight ALU loading ramps under the loading deck for convenient loading and unloading. Ljdpfx Ajyn Ud Eobnjac * Simply pull them out of the guide shaft and securely hook them in place. * The side perforated railing with multiple additional lashing points ensures your load is held securely. Vehicle transport trailer by STEMA, type Carrier XL - SHA .2, reg. no.: L-AH 138, GVWR: 3,500 kg, with heavy-duty support legs, loading ramps behind the license plate, braked with overrun brake, 100 km/h Vehicle not prepared, errors and intermediate sale reserved.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 640 mm, A26 GW26NGA00003 Passenger Car Transport Trailer, Manufacturer: STEMA, Model: FTAK 27-40-21.2 Gross Weight: 2,700 kg, inertia-braked, WAP901 hand winch, low-loader, hydraulically tiltable. Base frame: Extremely robust and torsion-resistant with crash-tested safety V-drawbar. Tiltable, sturdy frame design with safety locks. All frame components are hot-dip galvanized for corrosion resistance. Running rails: Extra-wide, perforated, non-slip zinc-plated running rails with large elongated holes for securely fastening tie-down straps. The extra-wide rail makes it easy to transport vehicles with different wheelbases. Integrated ramps allow for easy loading and unloading. Side walls: Signal red powder coating (corrosion-proof and scratch-resistant) for enhanced safety. Vehicle not refurbished Lajdpfx Abjyn Ubqensc ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,000 mm, loading space width: 2,010 mm, loading space height: 115 mm, total width: 2,540 mm, total height: 500 mm, A25 GW26NG000031 Car transport trailer, manufacturer STEMA, type FTAK 27-40-21.2, Gross weight: 2,700 kg, with overrun brake, WAP901 hand winch, low loader, hydraulically tiltable. Main frame: Extremely sturdy and torsion-resistant with crash-tested safety V-drawbar. Tiltable, robust frame construction with safety locks. All frame parts are hot-dip galvanized for corrosion resistance. Ledoyn Ucbepfx Abnsac Running rails: Extra wide, perforated, non-slip running rails made of galvanized sheet with large elongated holes for secure fixing of tie-down straps. The extra-wide track allows easy transport of vehicles with different wheelbases. Integrated drive-on ramps facilitate easy loading and unloading. Side panels: Signal red powder-coated (corrosion-free and scratch-resistant) for enhanced safety. Vehicle not reconditioned ...and much more. Errors and prior sale reserved.

Condition: used, empty load weight: 5,580 kg, maximum load weight: 13,220 kg, overall weight: 18,800 kg, axle configuration: 1 axle, first registration: 01/2022, next inspection (TÜV): 04/2027, loading space length: 11,070 mm, loading space width: 2,480 mm, loading space height: 2,485 mm, loading space volume: 68 m³, total length: 11,070 mm, suspension: air, tire size: 315/70 22,5, tire condition: 90 %, color: green, Year of construction: 2021, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Vehicle number for inquiries: 41144 Spier, Box body * Year of construction: 2021 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Air suspension * Fixed roof * Air coupling (red + yellow) * 15-pin connector * Lifting and lowering device * Inspections: MOT / Emissions test 04.2027 * Suspension: Air * Gross vehicle weight: 18,800 kg * Unladen weight: 5,580 kg * Payload: 13,220 kg * Permissible gross vehicle weight: 18,800 kg * Axle manufacturer: SAF * Tire condition 1st axle: 90% / 90% - Tire size: 315/70 R22.5 * Tire size: 315/70 R22.5 * Internal dimensions: L = 11070 mm, W = 2480 mm, H = 2485 mm * Internal volume: 68 m³ * Pallet spaces: 27 * Large Palfinger tail lift: MBB 3000 S - 3 tons * 5-row load securing rail * Perforated rail in the floor and ceiling * Telescopic rods * Reversing camera * Roof hatch * Side door * In top condition * Highlight: MOT valid until 04/2027 / Top condition / 3-ton tail lift Disclaimer: Subject to changes, prior sale and errors. More pictures and videos can be found on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. Lodpfxjy S Rcgs Abneac * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialists, we will be happy to advise you.

Condition: good (used), Morgana FSN Automatic Numbering Machine Functions: Numbering, perforating, creasing, cutting, and scoring. Technical specifications: Speed: 9000 sheets/h Lodpfxozdayko Abnsac Up to 5 perforating knives Up to 8 numbering heads Adjustable pressure Pneumatic sheet feed (identical to a folding machine) Continuous bottom feed with non-stop operation Possibility to adjust the numbering machine’s position relative to the sheet from the control panel Weight: 160 kg Power supply: 230 V The set includes two numbering machines, an instruction manual, and tools.

Condition: good (used), Morgana Autocreaser PRO 33 Automatic Creasing Machine The machine is fully operational and ready to use. It is the most efficient creasing system on the market, with a robust construction. Made in England. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. Instruction manual included. Manufacturer’s description: The Morgana Autocreaser Pro 33 is one of the world’s most popular automatic creasing machines, manufactured by the British company Morgana Systems Ltd. The machine allows for strip creasing, line perforation, and micro-perforation. The 7″ color Smart Screen programmer allows for easy machine programming. Working width up to 330 mm Productivity up to 8,500 sheets/h (A4), 11,000 sheets/h (A5) Ljdpfx Ajzdaw Nebnjac Paper feeding via a vacuum cylinder Programmable up to 16 creases in a single pass, unlimited number of programs Creasing paper weights from 0.11-0.4 mm (approx. 80-400 gsm) Option to install additional perforating discs – 20, 28, 56, or 90 notches Technical parameters: Maximum format (width/length): 330 x 700 mm Minimum format: 140 x 210 mm Maximum grammage: 0.4 mm (approx. 400 gsm) including laminated material Minimum grammage: 0.11 mm Maximum number of creases in a single pass: 16 Number of programs: alphanumeric, unlimited Productivity: 8,500 sheets/h (A4-1 creasing), 11,000 sheets/h (A5-1 creasing) Min. creasing distance from the front edge: 2.5 mm Min. creasing distance from the rear edge: 35 mm Minimum distance between creases: 1 mm Machine dimensions (L x W x H): 1450 mm x 522 mm x 1224 mm Net weight: 121 kg Power supply: 230V, 50 Hz

Condition: good (used), HSM ProfiPack P425 Cardboard Shredder This machine produces filling material from cardboard waste. Made in Germany. Ljdpfjzdawijx Abnjac In like-new condition, the machine is ready for production. Description: This high-performance filling material machine processes multiple layers of cardboard into padding mats or filling material, depending on your needs. The cardboard is simultaneously scored and profiled, creating a flexible mat of the desired width. The machine is equipped with casters for easy relocation. Advantages: – Hardened cutting rollers made of solid steel – Strong and efficient drive suitable for continuous operation – Adjustable material feed speed – Adjustable output material volume – Infinitely variable working width adjustment with a scale allowing for cutting filler material to any size – Intuitive operation via a durable control panel with LED messages – Integrated turbo function prevents blockages – Safe operation thanks to a safety switch – Equipped with wheels with brakes – Strong drive enabling cutting of 2-3 sheets of cardboard – Weight: 175 kg – Dimensions (H x L x W): 1040 x 570 x 770 mm

Condition: good (used), Multigraf Touchline C-375 Automatic Creasing Machine This machine is in very good condition and fully functional. Purchased from a small digital printing house. Year of manufacture: 2014. This is the most efficient creasing system on the market, featuring a robust design. Made in Switzerland. Can be connected to the Multigraf Touchline TF-375 folding machine. Controlled via a touchscreen color monitor. Technical specifications: Maximum sheet size: 375 x 660 mm Min. sheet size: 105 x 148 mm Maximum speed: 6000 sheets/h Material weight: 80-400 GSM Lasdpfx Aszdavlebnjc Power supply: 230 V Weight: 180 kg

Condition: good (used), Bacciottini Pit Stop DG LINE 8000 Automatic Creasing Machine Fully operational and ready to use. This is the most efficient creasing and perforating system on the market, featuring a robust design. Lajdszdar Hopfx Abnoc Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Built-in compressor. The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 80 x 100 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-400 GSM Maximum number of creases per sheet: 20 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 230 V Power consumption: 2 kW Weight: 180 kg Dimensions: 1500 x 750 x 1200 mm

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four-side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: Lasdpfozf Nk Tex Abnjc • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel-type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four-side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders: 3 sets Chiller: 1 set Spare K-type sealing knives: 3 sets

Condition: new, Year of construction: 2026, Perfect-2 1350 RED-L Wide belt sanding machine incl. sanding version for intermediate sanding of coatings Special price for showroom machine - in-house trade fair machine - - Robust, space-saving W-wide belt sanding machine for the highest demands. - Constant working height thanks to adjustable upper part - Working width: 1350 mm - Top sanding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level can be adjusted continuously according to a sanding grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit can be tilted 10 degrees - Parallel, spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 kW and 11 kW, 400 volts, 50 Hz - Motor-driven, finely adjustable height adjustment with digital display - Belt tension, control and oscillation are pneumatic - Compressed air consumption approx. 2 l/min - Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum device for the entire work table with additional perforations of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Over-thickness protection for workpieces with feed emergency stop and lifting mechanism - Continuously adjustable chip removal rate - Electronic feed control on the control panel, continuously adjustable from 3 - 15 m/min - PLC control with teach-in memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode - Fault diagnosis - Pass height 210 mm up to 18.5 kW - Sanding belt dimensions 1350 x 2000 mm Perfect - Equipment: High-quality, swiveling acrylic glass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and saving of sanding pad elements - Electronic compensation of sanding belt grit size - Operating and running hour counter Coating equipment: - Continuously adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included in the machine: Laedpok Dpp Sofx Abnjc Foldable outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Laedpjbtnftefx Abnsc Location: In stock in Bitburg - immediately available - at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Lasdpfxsbunq Ho Abnsc Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Location: 54634 Bitburg Available immediately

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: Lsdpfx Ash Hnp Dobnjac - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -