Used Perforation for sale (885)

Condition: used, maximum load weight: 2,739 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 06/2022, loading space length: 4,070 mm, loading space width: 2,070 mm, loading space height: 100 mm, total width: 2,160 mm, total height: 745 mm, A24. GW26G000233, * 100 km/h version with shock absorbers installed * Cleverly stowed, lightweight ALU loading ramps under the loading deck for convenient loading and unloading. * Simply pull them out of the guide shaft and securely hook them in place. Ljdpfx Adsyn Ud Espjhk * The side perforated railing with multiple additional lashing points ensures your load is held securely. Vehicle transport trailer by STEMA, type Carrier XL - SHA .2, reg. no.: L-AH 138, GVWR: 3,500 kg, with heavy-duty support legs, loading ramps behind the license plate, braked with overrun brake, 100 km/h Vehicle not prepared, errors and intermediate sale reserved.

Condition: new, empty load weight: 6,400 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, suspension: air, load capacity: 35,600 kg, • Length 13.55 m • 12 twistlocks • 1x20’, 2x20’, 30’, 40’ • Coupling height 1150 mm • Platform 1.60 m • 12 steel posts 1.60 m • Solid KAPUR floor 34 • Perforated UPN 140 side member • 1st axle liftable • Full LED lighting • Spare wheel carrier • PVC toolbox Ledpfx Adoy Ru Uwjpshk • Long mesh rack • 13 lashing rings 2T per side • LED work lights

Condition: new, maximum load weight: 14,910 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 6,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis frame: * Welded construction made of high-quality steel with cross members and an outer frame. Ramp storage: * Ramp storage between the longitudinal beams. Under-run protection: * Rigid under-run protection in accordance with ECE R58-03 * Side and under-run protection in accordance with EC regulations. Front support: * Front support with two-stage crank supports (2 x 12 t). Rear support: * Rear support with lockable drop supports. Axles: * 2 x 10t SAF axles with drum brakes, low-maintenance air suspension axle, lifting and lowering device with a total lifting stroke of approx. 180 mm, asbestos-free brake pads. Axle with a load capacity of 10,000 kg. * Compressed air tank, steel * Wheel fastening by center centering Tires: * Tires 235/75 R 17.5, on steel disc wheels, 8-ply, manufacturer of our choice * Tire pressure monitoring system, which indicates low tire pressure. Splash guard: * Plastic mudguards, splash flaps Load securing: * 6 pairs of lashing recesses designed for 8 t, evenly distributed on the outer frame * Beveled and perforated outer frame for attaching lashing hooks when the side boards are closed * Stake pockets: 3 pairs of welded stake pockets, internal dimension for stakes approx. 80 x 50 mm, evenly distributed. Braking system: * Automatic, load-dependent, two-circuit pneumatic braking system in accordance with EC regulations with spring-loaded parking brake (incl. 1 release valve), EBS connections for air (red/yellow), corrugated flexible lines for trailer. Floor: * Hardwood floor approx. 30 mm, with Z-profile boards. Lodpfxszgqncj Adpehk Front wall: * Designed as a removable side board, approx. 600 mm high. Lighting/electrical system: * Electrical system: 24-volt lighting system in accordance with StVZO * Multi-chamber rear lights, completely LED, with integrated ballast and flashing side marker lights. * On the trailer, additional position lights. * Position lights at the front, white (required for approval in EU countries and Switzerland). Electrical system: * Trailer connections: 2x7-pole * Trailer connection: 1x15-pole * Mounting plate for supply lines on the front cross member, lines permanently mounted, without separate connections, supply connections on the left. Accessories: * Wheel chocks in accordance with StVZO. * Plug-in revolving warning light at the rear. * Delivery of an additional 40 mm towing hitch (GVWR max. 13,500 kg). Painting: * Coating of undercarriage: galvanized + powder-coated * Chassis frame with high-quality hot-dip galvanizing and subsequent powder coating for optimum corrosion protection; the surface may show the ripple structure of the hot-dip galvanizing. * Coating of body parts: standard Color: * RAL 3002 carmine red * Center and corner profiles: KTL + powder coating: RAL 3002 carmine red * Side boards: RAL 3002 carmine red * Drawbar: hot-dip galvanized * We would like to point out that, due to the size of the chassis and the selected coating process (hot-dip galvanizing), surface imperfections may occur. These include, for example, zinc pimples, run-ons, zinc whiskers, distortion, etc. We have no influence on this, and it will not constitute a legal defect with regard to the appearance at a later date. Contour marking: * Yellow lateral reflective contour marking. * Yellow ref

Condition: used, amount 1 Palette Wooden box containing a variety of metal parts. -> Precision steel blocks — cleanly ground, right-angled blocks with holes. They are typically used as stops, spacers, clamping aids, or measuring aids. -> Angle and V-blocks — large, angular pieces with slanted recesses. They are used to securely clamp round or irregular workpieces. -> Clamping plates / perforated strips — long metal strips with many evenly spaced holes. Typically used for flexible fixtures where different parts can be combined. -> Small square blocks with a center hole — presumably spacers, centering aids, or modular components for fixtures. Sorting boxes — contain screws, small parts, or other clamping components. Ljdpfx Ajzg Nk Nsdpehk Complete Package Price

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets Ledpfx Adozht H Repohk • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: excellent (used), Year of construction: 1999, Counter: 34,552,033 Format (cm): 36x52 Dampening: conventional dampening Equipment / Additional information: Lhedpfx Adsyrfz Aspjk with N&P (numbering & perforating) unit

Condition: used, empty load weight: 7,360 kg, maximum load weight: 25,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, tire size: 385/65 R22.5, Equipment: ABS, Krone SD Tautliner | Edscher roof | Coil trough | BPW axles with disc brakes | Toolbox | Tyres: 385/65 R22.5 | Perforated frame for load securing | Subject to errors, input mistakes, and prior sale. Ledpfx Ajy E R I Aedpshk

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Colour: Grey Empty weight: 5.000 kg Ledpewf U Aqofx Adpehk - Documentation available: No - CE certificate present: No - Main motor power [kW]: 30 - Rotation speed [rpm]: 1470 - Hydraulic unit power [kW]: 3.4 - Oil tank capacity [L]: 75 - Rotor width [mm]: 1150 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Stroke hydraulic slide [mm]: 1000 - Opening width [mm]: 2580 - Opening length [mm]: 2180 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 63 +/- - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2008, offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) Lhjdpfx Ajx Afarsdpsk - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Ledpoqva I Ajfx Adpjhk -Grinding wheel holder: with grinding stone -Receptacle: Perforated shaft cone Ø 62-69 mm / left weight. -Grinding disc: Ø 376 x 30 mm -Total weight: 28 kg

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap Lhjdpfx Adodzqn Djpok - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: used, Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2005/1500/80 mm -Table height: 800 mm Ledpfx Aocmk T Ujdpehk -Plate: solid -Holes: 50 x 50 mm -Cast plate -Vice -Dimensions: 2100/1700/H1030 mm -Weight: approx. 2000 kg

Year of construction: 1982, condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Counter (m): 45 Format (cm): 32x46 Ljdpfx Ajivz E Tjdpohk Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. Lhsdpfeg Eglpex Adpok 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

Condition: good (used), Year of construction: 2003, functionality: fully functional, MULLER MARTINI CONCEPT 6 F Web Offset Printing Machine for Label and Form Printing Manufacturer Müller Martini AG, Zofingen, Switzerland Production Year 2003 Ljdozl A R Hopfx Adpshk • number of Colours: 6 • counter: 59 mil. impressions • max print 515 mm • roll width 200 - 520 mm • speed max 300 m / min • unwinder roll diameter max 1270 mm • electromotoric roll lifting • BST EKR web edge regulation double-sided scanning • automatic ink roller washing • printing plate thickness 0.15 - 0.3 mm • plate bending machine • Technotrans Alpha d • alcohol dampening • Schinler printing unit tempering • paper web cooling • IST UV drying • 6 UV lamps • 6 ink mist extraction devices • perforation unit 2303 • roll - roll production • roll - fold • roll - sheet • printable material 50 - 180 fg/m2 •

Condition: good (used), KAS Crease Matic Auto 50 Automatic Creaser Machine in very good condition, from a state-owned institution. Description: Working width up to 500 mm. Sheet length up to 999 mm. Programmer with the ability to store up to 28 creasing/perforation positions. Sheet feeding is automatic, and the machine has a built-in Becker compressor. Lodpfozlgcyjx Adpjhk Easy-to-use control panel with the ability to store up to 99 programs. Sturdy metal construction mounted on wheels for easy movement. A longitudinal perforation tool is included. Creasing of digital prints and laminated sheets is possible. Four creasing widths are included with the machine. Large work table. 230V power supply. Weight 190 kg.

Condition: used, mileage: 504,807 km, power: 290 kW (394.29 HP), first registration: 08/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2024, color: red, gearing type: automatic, emission class: euro6, loading space volume: 47 m³, loading space length: 8,200 mm, loading space width: 2,450 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, tail-lift, * Sun visor * Driver airbag * ABS * ASR * ESP * Active Brake Assist * Lane departure warning system * Radio * On-board computer * Rear view camera * Reversing alarm * Cruise control * Hill start assist Ljdpfxszl Iiuj Adpjhk * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Roof hatch * Driver's comfort seat * Heated seats * Seat ventilation * Differential lock rear axle * Steering axle * Air intake at top * Tandem trailer coupling * Duomatic air connection * Fog lights * 12-speed * Suspension: air * Payload: 14340 * Permanent brake: engine brake ----Special structure: Tail lift: Bär BC 2000 S4, load capacity: 2,000 kg, shield height: 2,300 mm, aluminum, foot control.----Structure: Spier beverage structure type 7GK040, sliding tarpaulin left + right, hardwood floor, 4 perforated strips, beam system for securing loads, loading area lighting. Loading height approx. 1,200 mm Only sold to traders. FOR EXPORT ONLY THE NET PRICE HAS TO BE PAYED !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. EQUIPMENT AND ACCESSORIES. The basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions are our general terms and conditions (see legal notice).

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Lhsdpfx Adjxavtdjpjk Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 14,900 kg, overall weight: 21,000 kg, axle configuration: 1 axle, loading space length: 9,930 mm, loading space width: 2,540 mm, loading space height: 850 mm, total length: 13,680 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution *(Vehicle shown for illustration only. Production and equipment according to customer requirements.)* # Low Loader Semi-Trailer Chassis Heavy-duty welded steel construction with replaceable 2" kingpin. Low bed sloping from the wheel area to the gooseneck with approx. 210 mm loading height. Rear section sloping towards the axle area. Full-width rear ramp support for aluminium loading ramps. Wheel chocks with holders. Aluminium side underrun protection. Removable galvanized steel wheel covers. 10 t rear towing eye. Spare wheel with holder mounted externally at the front on the headboard/toolbox. Lockable steel toolbox mounted crosswise on the front gooseneck (approx. L 2,400 × W 400 × H 600 mm). 24 V electric winch with 8,165 kg pulling capacity, mounted on the gooseneck behind the toolbox. Wireless remote control, 35 m steel cable (approx. Ø10 mm), roller fairlead and two removable guide rollers on the gooseneck and rear loading slope. NATO socket on front connection panel. 1 pair of recessed wheel wells starting approx. 700 mm behind the gooseneck, open towards the outside. Main frame protrudes approx. 145 mm. 4 pairs of mounting positions for wheel chocks (Fliegl standard), removable wheel chocks included. For transporting tractor units, front wheel well spacer blocks (approx. 50 mm high) included. # Lashing Equipment 2 pairs of 2.5 t lashing rings on the gooseneck 7 pairs of recessed 10 t lashing mushrooms in the outer frame (top and side) 4 pairs of recessed 10 t lashing rings in the main longitudinal beams 1 central rear screw-type lashing point, 6.7 t (JDT) 1 additional front folding lashing ring in the low bed, 10 t # Axle + Suspension SAF drum brake axle Air suspension with raise/lower valve # Wheels and Tyres 235/75 R17.5 tyres from leading manufacturers Twin steel wheels, factory silver finish Lsdpoi Ri Hkefx Adpjhk # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at front Electronic Braking System (EBS) with front EBS socket Note: Trailer may only be operated with towing vehicles providing full ABS functionality. # Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED number plate lighting LED front position lights LED rear outline marker lights (white/red) 2 × 7-pin and 1 × 15-pin front sockets LED rotating beacon with holder, activated via parking lights Additional LED work light at rear, activated via reverse gear # Floor Steel chequer plate on gooseneck Perforated steel low-loader deck with chequer plate in wheel well area Removable steel covers above wheel arches Perforated steel rear loading slope # Side Walls 400 mm aluminium side boards on the gooseneck, removable, approx. 2,500 mm long 400 mm removable aluminium rear board on the gooseneck # Loading Ramps Pair of aluminium loading ramps, max. capacity 12,000 kg per pair, approx. 3,400 × 320 mm Rear ramp storage compartment between the longitudinal beams # Registration / Marking Prepared for German registration Single-line number plate holder ECE R48 reflective contour markings (white sides, red rear)

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Available Immediately MAN TGS 35.510 – EURO 6, TipMatic – Automatic Transmission 8x2 Three steered axles Steerable/lift axle Front stabilizer approx. 14,000 kg Flatbed body with drop sides 6200x2550x600 mm Entry steps Checker plate floor Removable drop sides 9 x LED lights Retractable over-width markers extendable to 3500 mm wide Start/Stop Warning beacons 8 x stake pockets 6 x lashing eyes, 6500 daN Toolboxes Trailer coupling (AHK) Lhjdpfx Adewuhxwopek Storage compartments Storage boxes 20-foot container locking system Perforated side profile with lashing eyes, 2500 daN Crane: FASSI 710 RA 2.26 with fully hydraulic 4-point stabilizers, 6 hydraulic extensions on main boom, Fly-Jib L426 with 6 hydraulic extensions, wire rope winch, cross remote control, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), full accessory set for winch operation, foldable roller, quick coupling between main boom and fly jib, and more…

Condition: like new (used), Year of construction: 2025, NEW Bruks Re-Chipper DG-Re 600x1200 Throughput rm/h Motor capacity 315 kW Lhsdpfozhvvhjx Adpek Rotor diameter 1300 mm Rotor speed 530 min-1 Number of chipper knives 8 Number of counter knives 1 Chipping length < 10 mm Screen perforations R 680 mm x Qv 14/22 mm Vibro conveyor

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMGATE, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 420 mm/s, Komfi Laminator Amiga 52 Tandem Emboss Machine is "embossing ready" - including a unique embossing module. Various embossing patterns/rolls available. New, Manufactured 2024 Specifications: Max. production speed: 25 m/min (2121 B2 sheets/h) Max. output of the feed. head: 8000 sheets/h Min. sheet size: 20 × 20 cm Max. sheet size: 56 × 80 cm Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0), Max 1.4 mm (with overlap < 0) Max. paper pile height: 52 cm Thickness of laminating film: 24-50 µm Kind of laminating film: OPP, PET, Nylon Time of laminating roll warm up: Approx. 4 min Sheet overlap accuracy: ± 1 mm Machine dimensions (incl. delivery desk): 3.07 x 1.13 m Consumption of compressed air: 65 l/min Max. consumption of compressed air: 95 l/min Max. pressing force: 15 kN Max. consumption of electricity: 7 kW Machine weight: 820 kg Recommended machine capacity: 100 000 sheets/month Machine Characteristics Comes out of the well-known and proven concept of the Amiga laminator. Thanks to modular design, the embossing module is in fact “inserted” between the laminating unit and separator of standard Amiga. The solution, with two processing units in a row, makes it easy to switch from standard single side lamination to embossing, which creates a special pattern on the laminated surface. 7 standard patterns available. Special patterns on demand. First unit for lamination is always activated and works with IR heated cylinder. Second unit is activated only when embossing is needed. The pattern is created due to sheet preheating before the processing unit and high pressure of PUR roller pressed to the structured cylinder. The cooling of the embossing cylinder helps to "freeze" the pattern to the laminated substrate. Ledpfx Adoziavuspehk Basic configuration Feeder: Komfi single action feeding head. Sheet overlap sensor for protection of pressure roller from film sticking in case of a miss-feed. Additional separation adjustable blowers for reliable separation of sheets from the pile. Laminating Unit: Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwind air expansion shaft for 3″ reel core. Adjustable spread roll for perfect smoothing of difficult film before lamination roller. IR heating for laminating cylinder. Temperature sensor inside the cylinder for extremely precise regulation. Rubber coated pressure roller for laminating unit, PUR pressure roller for embossing unit. Embossing Unit: Sheet preheater in front of the embossing roller to activate surface before embossing occurs. Powerful pneumatic pressure system to ensure excellent laminating and embossing result. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in perforator to enable sheet separation, placed behind pull rollers to avoid web brakes. Cam driven separation roller. Skewing wheel for fine adjustment of snapping to avoid film flagging. Adjustable speed of snapping roller for perfect separation of difficult jobs. Fixed delivery desk.

Condition: used, Year of construction: 1997, Second-hand machine Lhjdpszk Nkdsfx Adpjk Year of manufacture: 1997 Features and technical specifications: Electro-hydraulic drive Vertical press cylinders: 3 Vertical cylinder stroke: approx. 130 mm Vertical cylinders adjustable via a perforated grid Horizontal press cylinders: 2 Stroke of horizontal cylinders: approx. 130 mm Horizontal pressing force: approx. 2,000 kp Medium-pressure beam: 1 unit Control: manual via hand lever Pressing area: 3,000 × 2,100 mm (L × H) Dimensions: 3,500 × 800 × 2,100 mm Weight: approx. 1,500 kg The information provided is subject to change until the machine arrives at our warehouse. Availability: at short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control Lhjdpfxozka T Ae Adpsk

Condition: ready for operation (used), A Summa roll cutter from a textile factory is available. Pinch rollers: 4, media width range: 170mm-1450mm, maximum cutting width: 1350mm, media thickness range: 0.05mm-0.25mm, maximum tool force: 600g, perforation force: 250g, axis speed: 1m/s, resolution: 0.025mm. Machine dimensions X/Y/Z: approx. 2050mm/700mm/1150mm, weight: approx. 100kg. The machine has minor damage to the housing. Documentation available. An on-site inspection is possible. Lsdozqu Etjpfx Adpshk