Used Pet for sale (596)

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Bledpfowqqv Dex Afxsl

Condition: excellent (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN444SI, unused -Item No.: 326737 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg Blsdpfx Afezmdupoxjl

Condition: good (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor Bsdpfxszmduco Afxell -Manufacturer: Kieback & Peter, temperature sensor type DN454I, unused -Item No.: 181300 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

Year of construction: 2010, condition: used, Stream delivery Blodpfx Afjc Nd Dbjxsl Built in 2010

Condition: ready for operation (used), Year of construction: 2009, Two Campetella SPIDER SM2HS are available, breaking capacity: 8kA, power supply: 380V, 50Hz, connected load: 5500VA, weight: 95kg. An on-site inspection is possible. Bedpfxjztrato Afxoll

Condition: ready for operation (used), Year of construction: 2012, Breaking capacity: 8kA, power supply: 400V, 50Hz, connected load: 5500VA, weight: 95kg. An on-site inspection is possible. Blsdpfx Asztraysfxsl

Condition: used, Drying machine HENRI PETIT JEAN ECO 600A Bljdpfxjyvk Scs Afxsl

Condition: used, TECHNICAL DETAILS - capacity : 56 [l] Bljdpfxjv Eg Ugj Afxsl - max weight : 80 [kg] - speed : 950 [rpm] - power : 1.5 [kW] - total weight : 265 [kg] - drum size : 500 x 300 [mm] EQUIPMENT - hoist

Year of construction: 1998, condition: good (used), functionality: fully functional, Nilpeter Model: F3000 Machine No.: F-2002 Year of manufacture: Approx. 1994–1998 Please note: The exact year cannot currently be confirmed due to a damaged machine identification plate. Printing process: Flexographic printing + Screen printing Flexographic printing units: 5 Screen-printing units: 2 Availability: By arrangement _____ TECHNICAL CONFIGURATION Printing Units • 5 flexographic printing units • 2 screen-printing units • Combination of flexographic and screen printing within one production line • Suitable for standard as well as specialty label applications • Possibility to apply high-opacity inks, whites, and special effects through the screen-printing units _____ Drying System • 5 UV drying units • 5 hot-air drying units Bjdpfx Afsztqrnjxoll • Combination of UV-curable and water-based ink applications possible, depending on substrate and production requirements • Flexible drying configuration for different materials and coating applications _____ Web Handling • Unwinding section • Web transport through the complete production line • Turnbar system • Delamination / relamination system • Suitable for reverse-side printing and multilayer label applications • Stable web handling throughout the production process _____ Laminating Section • Integrated laminating unit • Suitable for protective lamination • Suitable for multilayer label structures • Allows inline finishing without the need for a separate laminating machine _____ DIE-CUTTING AND CONVERTING The machine is equipped with an extensive converting section: • 3 rotary die-cutting stations • 1 additional die-cutting station for sheet delivery • Integrated sheet delivery • Suitable for multiple cutting, perforating, and converting operations • Flexible configuration for different label and converting applications _____ SHEET DELIVERY • Integrated sheet delivery system • Additional die-cutting station dedicated to sheet production • Enables the machine to produce both roll-to-roll and roll-to-sheet products • Additional flexibility for specialty applications _____ INCLUDED ACCESSORIES The machine is supplied with a considerable quantity of production tooling and accessories. Magnetic Cylinders • 10 magnetic cylinders Anilox Rollers • 21 anilox rollers Printing and Rubber Rollers • 5 rubber rollers • 10 printing rollers Additional Tooling • Various additional cylinders • 1 new slitting cylinder • Further tooling available with the machine The extensive tooling package significantly reduces the need for additional investment and supports a faster production start after installation. _____

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 3520.17.137, Tripet TST201CNC No. 3520.17.137, Year of Manufacture: 1987 Bjdpfx Ajwffmmofxjll Power: 76 kW

Condition: like new (used), Year of construction: 2021, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 0112-196, type of input current: three-phase, total width: 115 mm, total length: 400 mm, total height: 100 mm, input voltage: 400 V, Petratto Mini Metro 78 modular folding and gluing system (2021), consisting of two identical modules. The machine has been lightly used and is in excellent condition. It consists of two Mini Metro 78 modules, providing a flexible configuration for a wide range of folding and gluing applications. The system is equipped with various accessories and tooling for folding and gluing, making it suitable for the production of presentation folders, sleeves, wallets, envelopes, cartons and many other paperboard converting applications. The modular design allows different configurations depending on the job requirements. Bodezp Nkuopfx Afxell The machine has been well maintained, is fully operational, and is ready for production. It is being offered for sale only because we have had very limited demand for this type of work.

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Bedjxhc Spjpfx Afxsll Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: excellent (used), Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Peter Hirt, Inductive displacement sensor with measurement protocol, original packaging -Type: T501F Bljdpex Svy Djfx Afxjl -Number: 4x measuring probes available -Price: per piece -Cardboard dimensions: 160/120/H30 mm -Weight: 0.2 kg

Year of construction: 2001, condition: like new (used), Carbide saw side grinder Petschauer model FL600 year 2001 Bledpfxed Emc Uo Afxol

Condition: new, IPETRONIK Interior Simulation Box Here we offer an IPETRONIK interior simulation box. Technical data and description of the system: IPETRONIK Interior Simulation Box (new and unused) The interior simulation box is designed to simulate the passenger compartment for tests in recirculation mode. It has a variable interior volume of 1.8 to 4 m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is regulated and directed into the interior. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulated housing is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overheating via a safety thermostat (ESTI). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The system is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the insulated chamber: Dimensions: External: Width 1,860 mm, Depth 2,360 mm, Height 1,360 mm Internal: Width 1,700 mm, Depth 2,200 mm, Height 1,200 mm Insulation: 80 mm rigid polyurethane foam, CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102 Technical data and description of the system: Connection: Tongue-and-groove system with foam-injected eccentric locking latches. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, polished, grit 320 Floor design: 2.0 mm stainless steel sheet 1.4301, SM rhombus pattern, non-slip, Floor with a 90° upturned edge around the perimeter (approx. 15 mm), floor sheet flush with wall sheet, Pressure distribution plate made of laminated wood, can withstand a load of 1,500 N / rubber wheel (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded stainless steel pipe as a floor drain, led downwards through the floor Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.L., DIN left, heated door frame (230 V), Heating tapes are silicone-free, 4-sided sealing profile made of EPDM, Latch closure, lockable, emergency release, Heated viewing window, 500 x 500 mm, triple-glazed, Surface heating (230 V), frame heating (230 V), heating controlled by the customer, Silicone-free edge trim Sliding wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, polished, grit 320, with protective film, closed on the other side with sheet metal (The rear wall is manually adjustable in stepless increments to change the volume) Recirculation system: A heat exchanger (Systemair) for indirect temperature control is installed in the recirculation circuit for temperature control. The air is circulated by a radial duct fan (Cosmo), and heating is provided by an electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by means of temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is carried out via a secondary brine circuit with pumps (KSB) and a 3-way valve (Belimo). Installed electrical heating power 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Power supply from station: =TME2++AS-QF21 Operating voltage: 400V Power: 17kW Rated current: 33A Fuse: 35A Control voltage: 24V DC / 24V AC / 230V AC PLC system: S7 300 Type: IPETRONIK Interior Simulation Box Condition: used Scope of supply: (See picture) (Changes and errors in the technical data, information are subject to change!) Bljdpfozd Ukpsx Afxjl We will be happy to answer any further questions

Condition: like new (used), Year of construction: 2014, Nilpeter Model: FA-4 – like new! Year: 2014 Printing Width: 410 mm (16") Web Width: 420 mm Colors: 6 UV Flexo Machine Speed: up to 175 m/min Delivery Terms: FCA – Loaded into Container Condition Rating (FGT): ★★★★★☆ (9/10) Bledpfx Afezmhiksxjl _____ Why this machine is interesting This Nilpeter FA-4 represents one of the most advanced generations of servo-driven label presses. In addition to its excellent basic configuration, the machine offers an impressive array of valuable accessories and upgrades, making it immediately suitable for a wide variety of production jobs. Key advantages include: • Premium servo-driven Nilpeter FA platform • 6 UV Flexo printing units • Double rotary die-cutting capability • Corona treatment installed • WINK Gap Control system installed • UV lamination capability • Cold foil preparation • Delam/Relam system • Turret unwinder/rewinder • Video inspection system • Automatic web guide • Automatic register control • Cleaninking quick-change ink chamber system • Comprehensive tooling package included • Large package of anilox rollers • Extensive sleeve package • Extensive magnetic cylinder package This configuration allows for immediate production without significant investment in additional tooling. _____ Technical Specifications • Maximum web width: 420 mm • Maximum print width: 410 mm • Printing technology: UV Flexography • Printing units: 6 • Mechanical speed: 175 m/min • Servo-driven technology • Automatic register preset • Automatic impression preset • Quick-change Cleaninking cassette system • Servo-driven anilox rollers • Servo-driven plate sleeve system • Double-arm automatic unwinder • Double-arm automatic rewinder • Pneumatic splice table • Automatic web guide • Web break detection • Passive antistatic • Cooling system • UV drying • Integrated video web inspection • Rail system for future converting modules • Rotary die cutting • 360° register adjustment

Year of construction: 1998, condition: good (used), functionality: fully functional, 1 x Chip vibration sieve Henri Petit Jean B 222 Year of manufacture: 1998 with filling hopper Blower pneumatic sieve clamping stepless speed control Accessories: Bljdoyx Di Tspfx Afxel 5 x various metal sieves The machine can be inspected while powered on.

Condition: excellent (used), Year of construction: 2011, Thomas Pettersson (Sweden). Fully automatic compact high speed planing line 150m/min !!! High performance handling system suitable for use with a moulder, double end tenoner etc. consisting of the following. 1. Pack infeed system, roller and chain conveyors, 5m + 3,8m. 2. Robot layer feeder (4 layers per minute) with automatic stick collector. 3. Crossfeed system with end trimmer saws (angle adjustable), 22 cycles 400mm wide per minute.. 4. Moulder infeed (right side with adjustable fence line) with 4 feed roller accelerator 150m/min maximum speed, 5. Infeed belt with side pressure to fence. 6. Outfeed belt 5m long. 7. Board sweeper to stacker capable of stacking 80pcs/min. 8. Automatic stacker with stick magazines, 1200mm high packs, 9. Magazine for automatic loading of pallets to outfeed, holding 10 pallets. 10. Outfeed roller conveyor, 5m long.. 11. Control system with remote panels. This high speed fully automatic line could be used for feeding a moulder, resaw, multi-rip etc. Blodpfx Asth Taaofxel It could be modified to suit feeding a double end tenorer etc also. If you need a highly efficient, compact, labour saving handling system for lengths up to 2.1m then this could be the equipment for you. Very suitable for doors, windows, furniture, specialist packaging etc. Inspection is very welcome.

Condition: used, mileage: 790,000 km, power: 357 kW (485.38 HP), first registration: 07/2011, fuel type: diesel, overall weight: 23,500 kg, axle configuration: 6x4, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Here is your chance to drive a US truck and transport 28 pallets if necessary. Bodpfx Afsqx Suljxoll The price is incl. the trailer (EZ. 2015) We can also remove the body completely for you so that you have a SZM again or just purely as a show truck for cruising. Conversions such as chrome parts and leds are included in the price after consultation with you !!! Cummins ISX 15 L 18 Speed Fuller 2 beds Original Peterbilt leather seats Inside typical Peterbilt everything your heart desiresThe truck has too many extras to list. - Further questions by email or phone. - Price incl. German letter. - Errors and prior sale reserved - financing and trade-in possible, offer everything. - TIPPING HYDRAULICS POSSIBLE FOR AN EXTRA CHARGE!!! - . - OUR motorhomes ARE REGISTERED AND TAXED IN GERMANY AND ARE INCLUDING AN EU VEHICLE LETTER . WITH US, THE NAME HAS QUALITY WE CAN - - Your dream vehicle not included in Europe's largest US truck fleet ? Not your company or favorite color? No problem... we have over 500 more trucks or motorhomes in the USA and Canada new and used of all brands also work with one of the best paint shops in Germany let us advise you and make a free offer. we look forward to your call or uchstermine are unfortunately only possible with an appointment.

Condition: good (used), Year of construction: 2007, NILPETER FA-4 Servo-Driven UV Flexo Printing Press Year: 2007 Web width: 420 mm / 16.5” Number of colors: 8 flexo printing units Technology: Servo-driven UV flexo press Max. mechanical speed: approx. 175 m/min Application: Multi-substrate label and packaging production Condition: Used, offered “as is” Availability: Subject to prior sale Machine configuration: Unwind section: • Unwinder with reel lift • Web guide system • Splice table • SDI web cleaner • Vetaphone corona treater Printing and web handling: • 8 x flexo printing units Bodpfx Ajy Tytkofxsll • Servo-driven press technology • Automatic registration system • Chill rollers with chiller • 8 x IST MBS 5 UV dryers • Delam/relam unit with web turn bars Additional converting/finishing equipment: • 2 x rail-mounted unwind/rewind units for cold foil or lamination • Back slit unit • Rotary die-cutting station • Waste matrix rewind • Product rewind with lay-on roller • BST web inspection camera

Condition: like new (used), Year of construction: 2015, 420 mm 2015 Tools 6-color Bljdox Hhz Aspfx Afxsl etc.

Condition: used, mileage: 788,500 km, power: 335 kW (455.47 HP), first registration: 01/2018, gearing type: automatic, emission class: euro6, Equipment: air conditioning, -Peterbilt 579 -First registered: January 9th, 2018 -Paccar engine -455 HP -Euro 6 -10-speed Eaton Fuller automatic transmission -Mileage approx. 788,500 kilometers -Disc brakes -Rear axle, air-suspended -Adjustable fifth wheel -Axle lock -Aluminum rims -Aluminum tanks -Full fairing -Adaptive cruise control with brake assist -2x sleeping berths -2x seats, air-suspended -Refrigerator -Cruise control -Air conditioning -Adjustable multifunction steering wheel -On-board computer -Digital tachograph -Radio -Brake system converted to EC standard -24 volt light & ABS system for trailer operation -German registration The vehicle has just arrived and is currently being converted. But it can be viewed at any time. Price: 87,800.00 ¤ net Bledpfsp Nny Usx Afxel You can find more pictures on our homepage: Subject to errors and prior sale Certified according to ISO 9001: 2015 Every imported truck is converted in our workshop according to the EC guidelines, e.g. the braking system. We also refine the vehicles according to customer requirements. Examples: Individually manufactured stainless steel parts, interior fittings, paneling (leather, fabric), etc. PTO and ADR approvals are also possible in-house. If your dream vehicle is not included, contact us. We will then import your dream truck (all manufacturers, used or new). The prices include: Shipping, customs clearance, conversion according to EC guidelines, German TÜV approval, AUv

Condition: new, Year of construction: 1989, Candle filter, free-standing on 3 stainless steel feet Filtration surface: 30 m²/h Test pressure/operating pressure: 7 bar Volume: 1830 l Length: 1,5 m Width: 1,5 m Bledpfxoxbqkgo Afxsl Height: 2,9 m Material: Stainless steel 1.4541; wall thickness of jacket and cone 4 mm; of dished bottom 6 mm Features: Outlet: butterfly valve DN150

Condition: used, Year of construction: 2000, Manufacturer: Travaini pump Model TRHB 50-280 Year: 2000 Type : liquid ring pump Bedox R Dcwopfx Afxjll Number of stages : 2 Motor power: 9.2 kW - 1450 rpm Flange size: DN 50 Nominal capacity (m³/h) : 280 Documentation available

Condition: used, Year of construction: 2009, Folding & Creasing machine Bljdpox Ndy Tjfx Afxol Petratto Cordoba 3 Year: 2009 Knife Creasing and Folding Machine Description: - Feeder: Horizon - RFU-54 - Creasing station - Excl. glue unit - Buckle folding section with 3 buckle plates - Delivery with pressing: PGN 66 - SC10 type 500