Used Pet for sale (666)

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. Bledsg Ailcepfx Amgsp MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2021, offer consists of: TRANSPAK Hercules combination tool H-46A-12 for PP & PET STRAP Bodpfxou Srwwo Amgslp - strap width: 12mm - max. tension force: 300kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: new, Year of construction: 2026, operating hours: 200 h, functionality: fully functional, SHOWROOM machine, the advertised machine was never delivered and was only run for test purposes. Rotating doypack wrapping machine DEAP-8BT: The 8-station rotating horizontal filling and sealing machine fills and seals doypack stand-up and seals Doypack stand-up pouches with cycle times of up to 50 pieces per minute. minute. The compact design of the rotary machine is very space-saving and flexibly adjustable to different bag widths. The rotary-type machines in the AP series are the cost-effective alternative to complex linear filling machines without time-consuming set-up times. The stand-up pouches are transported via a transported via a bag magazine and filled and sealed in 8 rotating workstations. sealed. Applicable products: The DEAP-8BT series reliably packs - Pet food - Cosmetics (shower gel, soap) - Food (e.g. muesli or dried fruit) dried fruit) - small parts Machine information: - Quick format change of the bags - Additional modules can be integrated (gas flushing, weighing systems, double sealing) - Touch panel control, with storable programs programs - Central gripper adjustment - Customized special design - for special widths or special feeding systems - up to 50 pieces/min (depending on bag size) Other information: - Safety standards: CE conformity, DIN standards - Noise level: Below 80 decibels according to DIN 45635 - Applicable bag types: Pre-made stand-up pouches, flat pouches, spout pouches, pressure seal pouches, slider pouches, gusseted bags, single-lip (depending on optional components - Film types: OPP/CPP, OPP/CE, PET, PE, laminated films, composite films Bsdpfxstuwf Es Amgslp - Product types: piece goods (screws, nuts, etc.), bulk goods (flour, nuts, etc.), liquids (sauces, paints, etc.) This advertisement refers to the packaging machine and not the multihead weigher.

Condition: used, Year of construction: 2001, Used Filling Monoblock RIVI 50-60-12 12000 bph Technical Features and Operating Details of the Used RIVI Filling Monoblock  The Used Filling Monoblock RIVI 50-60-12 12000 bph delivers high efficiency and operational reliability through its integrated bottling system. RIVI manufactured this machine in 2001, combining rinsing, filling, and capping functions into a single unit that optimizes both space and production time. Consequently, the Used RIVI Filling Monoblock suits companies aiming to enhance their bottling operations seamlessly. Monoblock Specifications and Bottle Formats The 50-60-12 model processes PET bottles with diameters between 50 and 95 mm and heights ranging from 150 to 340 mm. Additionally, it supports formats of 1.5 L, 0.7 L, and 0.5 L, enhancing flexibility for various production needs. Furthermore, it achieves a production rate of 12,000 bottles per hour, making it ideal for medium- to high-capacity production lines. The machine measures 5370 mm in length, 4070 mm in width, and 3000 mm in height, and weighs 20,000 kg. Moreover, the system rotates clockwise, which ensures continuous and uninterrupted production flow. Blodevxum Dspfx Amgop Rinsing Section In this section of he Used RIVI Filling Monoblock, 50 grippers firmly hold bottles by the neck, stabilizing them during the rinsing process. Each bottle receives a single treatment, during which filtered water or a sanitizing solution removes dust and residues. In addition, the synchronized rotation system ensures that the rinse covers all areas uniformly, while the controlled drainage system effectively prevents liquid buildup and contamination. As a result, this process thoroughly prepares the bottles to receive the product without compromising quality. Filling Section The machine uses a gravity light depression filling system, which is ideal for non-carbonated liquids such as still water. However, it also efficiently fills sparkling water by maintaining gentle pressure control, ensuring minimal gas loss. With the proper modifications, it can handle certain types of soft drinks, making it versatile for a variety of production needs. The system employs 60 dedicated filling valves, allowing precise product flow while avoiding foaming or turbulence. Sensors continuously monitor and regulate the fill level, ensuring consistent quality even at high speeds. Capping Section The capping section relies on 12 heads to securely apply plastic screw caps. The machine includes an automatic cap feeder, with a hopper capacity of 10,000 to 13,000 caps, supporting Neck 1881, low thread, and sport caps. First, the system automatically feeds and positions the caps above the bottles. Then, each head screws the caps on with the correct torque, creating a tight, hermetic seal that preserves both gas and product freshness. Additionally, integrated sensors detect improper tightening and immediately report any errors. Therefore, the system reduces waste while guaranteeing reliable sealing and operational efficiency.

Condition: used, Year of construction: 2003, machine/vehicle number: M317, Technical Specifications & Performance DataThis ACMA rotary filling monoblock integrates a precision filler and capping unit with an automatic cap sorter, delivering reliable throughput for liquid detergent production and industrial packaging applications. As a second hand solution ideal for a used bottling line, it combines compact footprint with robust engineering.Manufacturer: ACMA (Corniani division) Model: RCCA-1562 Manufacturing year: 2003 Production speed: up to 105 bpm depending on format Format performance: 0.45L: 95–100 bpm; 0.5L: 100–105 bpm Compatible formats: 0.45L, 0.5L Container handling: Designed for PET and Glass bottle handling (with appropriate change parts) Electrical supply: 380 V, 50 Hz, 10 kW Auxiliary circuits: 24 V Pneumatic pressure: 6 barAdvanced Automation & Control SystemsThe monoblock features rotary motion for steady, synchronized bottle transfer between filling and capping stations. The integrated cap sorter ensures consistent cap orientation and feeding to the capping heads, supporting sustained high-speed operation. Standard industrial control architecture enables precise timing, smooth acceleration curves, and consistent torque application during capping.Automatic cap sorting and feeding to the capperCoordinated filler-capper synchronization for stable continuous flowIndustrial control logic for accurate cycle timingOperator-friendly interface and routine changeover adjustmentsElectrical protection and auxiliaries matched to 24 V control circuitsProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly within a complete used bottling line. It can operate inline with upstream bottle preparation equipment and downstream inspection, labeling, and packaging machinery. Format changes between 0.45L and 0.5L are supported with the correct set of format parts.Standalone or inline operation with conveyorsInterfaces readily with labeling, inspection, and end-of-line packaging systemsSuitable for liquid detergents, household cleaners, and similar chemical products when configured accordinglyFlexible container materials subject to starwheel and guide change partsMachine Condition & Maintenance HistoryOffered as a second hand rotary filling monoblock, the unit presents defined performance data for 0.45L and 0.5L formats. It is positioned for quick recommissioning in an industrial packaging environment, with capacities appropriate for medium-speed production. Availability and readiness support rapid deployment in existing lines.Operational Performance & VersatilityWith speeds up to 105 bottles per minute, this ACMA monoblock is engineered for consistent fill accuracy and secure closure application. The integrated sorter enhances capping efficiency and minimizes misfeed-related downtime. The rotary platform supports smooth bottle handling, reducing scuffing and maintaining presentation quality across PET or glass bottles when equipped with the correct handling parts.Stable rotary handling for reduced container stressHigh capping reliability supported by integrated sortingAdaptable to multiple home care and chemical categories with appropriate componentsBalanced... Bledpsyr Hu Defx Amgsp

Condition: used, Year of construction: 2014, Overview This stretch blow molding machine was manufactured in 2014 by Urola. The machine is designed for the production of PET containers with a 2-cavity mold configuration. Technical data  - Capacity: Maximum 3,200 bph - Formats: Maximum container dimensions 120 mm diameter × 350 mm height - Application: Production of PET containers - Configuration: 2 cavities Installed Power - Preform rotation motor: 0.18 kW Bedpfx Ameyr Iy Uogslp - Clamping press motor: 7.5 kW - Stretching motor: 3.0 kW - Transfer arm motor: 1.3 kW - Preform heating oven: 32.0 kW - Preform feeder: 0.36 kW - 24 VDC power supply (10 A): 1.0 kW - Air reflector fan: 0.75 kW - Neck cooling fan: 0.75 kW - Lubrication pump: 0.07 kW - Container evacuation: 0.09 kW - Intermittent chain rotation: 0.18 kW Cooling Circuit - Water inlet temperature: 10–20 °C - Water consumption: 2 m³/h - Operating pressure: 4 kg/cm² - Cooling capacity: 10,000 kcal/h Pneumatic System – Low Pressure - Operating pressure: 7 kg/cm² - Air consumption: 800 l/min Pneumatic System – High Pressure - Operating pressure: 38 kg/cm² - Air consumption: 5,000 l/min

Condition: used, Year of construction: 2018, Overview  This wrap-around case packer (cardboard packaging machine) was manufactured in 2018 by Germany KRONES. The VARIOPAC PRO W-7 is designed for cardboard packaging of PET bottles. The machine is still installed, connected to energy, and currently in production. It will be available from mid of May 2026 and can be visited in production on request. Technical data  - Capacity: 67 cartons/min (x6) - Formats: Bsdsy A Nd Djpfx Amgslp - 1000 ml – 3×2 – single lane - 500 ml – 6×4 – single lane - Application: Cardboard packaging (wrap-around) for PET bottles - Configuration: Wrap-around case packer

Year of construction: 2010, condition: used, machine/vehicle number: HO1, Used Tetra Pak 4.3 T aseptic homogenizerTechnical Specifications & Performance DataThis industrial homogenizer is engineered for high-pressure processing and reliable particle-size reduction across beverage and food applications. Manufactured by Tetra Pak, the TA200 platform is recognized for stable operation, hygienic design, and robust components suitable for continuous-duty production. This unit is associated with a 250 bar rating, aligning with common requirements for dairy, juice, and beverage processing prior to filling and packaging on a used bottling line or second hand industrial packaging system.Manufacturer: Tetra PakModel: TA200Pressure rating: up to 250 bar (as indicated on the machine type plate)Design intent: High-pressure homogenization for beverage productionCE marking: PresentAseptic capability: Includes preparation/upgrading to aseptic homogenizationApplication scope: Beverage production and industrial packaging linesAdvanced Automation & Control SystemsThe TA200 platform from Tetra Pak is designed to integrate with modern automation architectures used in beverage production. Typical interfaces support upstream and downstream synchronization with processing and bottling equipment. Operator-friendly controls and clear status indication help maintain repeatable results and reduce downtime.Integration-ready control interfaces for line automationProcess monitoring for pressure and flow stabilityDesigned for consistent homogenization performance at set pressureSafety interlocks aligned with industrial practiceProduction Line Integration CapabilitiesThis homogenizer is suitable for installation upstream of fillers and other bottling equipment within a used bottling line or a second hand beverage production plant. Its aseptic upgrade preparation supports integration into hygienic and ultra-clean process segments where product protection and shelf-life are priorities.Compatible with standalone or inline operationInterfaces with mixers, pasteurizers, and fillers in industrial packaging linesFlexible placement before filling of PET or glass containersSuitable for multi-product beverage workflowsMachine Condition & Maintenance HistoryThe unit is presented for sale with inclusion of preparation/upgrading to aseptic homogenization. It is positioned for rapid commissioning into beverage production environments. Routine maintenance practices can be applied in accordance with Tetra Pak guidelines to preserve performance and reliability.Commercially offered as a second hand industrial assetReady for operation subject to standard installation and commissioningOperational Performance & VersatilityHigh-pressure homogenization improves stability, mouthfeel, and product uniformity, enabling downstream filling into PET and glass packaging. The TA200 platform is widely used in beverage production where consistency and quality control are essential.Stable particle-size reduction at defined ... Blsdpfezd Ul Tjx Amgop

Condition: used, Year of construction: 2004, machine/vehicle number: SO136, Used combiblock KRONES contiform S8 + mecafillTechnical Specifications & Performance DataThis Krones Contiform S8 combi blow molding unit is integrated with a Krones Mecafill filler and Krones capper, delivering reliable performance for modern beverage production. Built for PET bottle handling, it supports common still and sparkling water formats on a compact rotary platform. As part of a used bottling line or as a stand-alone combi station, it offers robust engineering and consistent output for industrial packaging operations.Manufacturer: KronesModel: Contiform S8 (combi with Mecafill filler and Krones capper)Year of manufacture: 2004Production speed: up to 12,800 bottles per hourContainer material: PETNeck type: AlaskaBottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsMaximum container height: 350 mmNo. of cavities (molds): 8Operating pressure: 40 barWork direction: ClockwiseLayout dimensions (approx.): Length 13022 mm, Width 10649 mmAdditional mechanics: 8 infeed/outfeed grippers; 220 mandrels on the preform handling pathAdvanced Automation & Control SystemsEngineered for dependable operation, this blow molding machine features an operator-friendly interface and modern control architecture to streamline setup, monitoring, and changeovers. Digital recipes help maintain repeatability across formats in second hand environments.HMI: KronesPLC: SiemensElectrical supply: 400 V, 3-phase, 50 HzAutomation: Rotary combi integration with synchronized blow, fill, and cap functions for stable throughputOperator protections: Safety guarding and interlocked access for maintenance zonesProduction Line Integration CapabilitiesThe Contiform S8 combi configuration enables seamless upstream preform handling and downstream filling and capping, minimizing footprint and transfer points. It integrates easily within a used bottling line, supporting conveyors, inspection, and downstream packaging machinery for beverage production.Operation modes: Integrated combi (blow–fill–cap) with rotary synchronizationFormat range: 0.5L to 1.5L PET bottlesApplication: Ideal for water bottling within industrial packaging and production line setupsMachine Condition & Maintenance HistoryThis machine has been overhauled and is guaranteed, prepared for immediate operation with compatible spare parts available. It combines the assurance of refurbished equipment with the value expected from second hand bottling equipment.Condition: Overhauled, guaranteed, ready for operationWarranty: 6 monthsOperational Performance & VersatilityDesigned for PET containers, this rotary... Bledpfxsy Szb Ts Amgjp

Condition: used, Year of construction: 2001, Overview The handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2001 and was until recently part of a PET filling line at a large German soft drinks manufacturer. The handle applicator is now being released. Technical data  - Total output: 70 cycles/min - electrical connection: 400V/N/PE/50Hz, 5,1kW - Two lanes Additional information Bsdpfxsy Scb Ue Amgelp - conveyor for packages available

Condition: used, Year of construction: 2003, Overview This Kettner Blitzpac Junior E 3T bottle packer, manufactured in 2003, is designed for the automatic packing of PET bottles into beverage crates. The machine is configured for the 20 x 0.5 l crate format and is equipped with 4 packing units, each with 4 x 5 positions, matching the required 20-bottle crate layout. The system uses an automated gripper head / matrix gripper assembly to pick bottles from the conveyor lanes and place them into crates. The machine includes stainless steel lane guides, modular chain conveyors, SEW-Eurodrive gearmotors, pneumatic components and safety guarding with protective fencing and transparent panels. The machine is identified as Kettner Junior E 3T / Blitzpac Junior E 3T. Technical Data Blodpszbg T Esfx Amgjp - Manufacturer: Kettner GmbH / Krones Group - Machine Type: Bottle packer / crate packer - Model: Blitzpac Junior E 3T - Year of Manufacture: 2003 - Application: Packing of bottles into crates - Format: 20 x 0.5 l crate - Configuration: 4 packing units, each with 4 x 5 positions - Gripper System: Pneumatic matrix gripper for bottle handling - Conveyor System: Modular chain conveyor with stainless steel lane guides - Drive System: SEW-Eurodrive gearmotors - Safety: Protective fencing, transparent guarding, safety / sensor equipment - Electrical Supply: 230 / 400 V AC - Current Type: 3-phase - Frequency: 50 Hz - Nominal Current: 13 A - Condition: Used, installed in industrial bottling environment

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes Bodpfxeyx I Awe Amgslp - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2009, Overview  This handle applicator was manufactured in 2009 by Italy TWIN PACK. The machine is designed for handle application on PET bottle packs. Production was stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It has less than 500 operating hours and is available immediately. The reason for sale is a new project with installation of a complete new line. Technical data  - Capacity: 35 ppm - Formats: 1.5 L – 3×2 Bledpfjy Etdgex Amgep - Application: Handle application for PET bottle packs - Configuration: Not provided - Operating hours: Less than 500 hours

Condition: used, Year of construction: 2005, Overview  This shrink hood applicator was manufactured in 2005 by Italy MARFIN. The machine is designed for packaging of PET products on pallets using shrink hood application. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data  - Capacity: up to 50 pallets/hour - Formats: Bledpfx Aoy Hmp Ejmgjp - 1.5 L – 3×2 – 1200 × 800 - 0.5 L – 4×3 – 1200 × 800 - Application: PET - Configuration: Shrink hood applicator

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Bjdpfjx H Tgdjx Amgelp Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: used, Year of construction: 2008, operating hours: 8,000 h, machine/vehicle number: ET229, SACMI OPP Roll-fed Labeling Machine – Overview This used SACMI OPP roll-fed labeling machine is configured for high-efficiency wrap-around label application on PET bottles. Built in 2008 and designed for modern beverage production, it integrates seamlessly into a used bottling line or can operate as a standalone station within industrial packaging environments. With a nominal capacity of 12,000 bottles per hour, it is well suited for medium-speed operations in water, juice, and other beverage segments that use OPP film labels. SACMI engineering is known for durability, precision, and reliability, making this second hand labeling solution a strong fit for producers seeking dependable bottling equipment. The machine supports multiple PET bottle formats, including 1.5L, 0.6L, and 0.33L sizes, providing flexibility for varied SKUs and seasonal product runs. OPP film labels, applied as roll-fed wrap-around, help reduce labeling costs and improve presentation quality with clean seams and consistent label placement. This configuration is a practical choice for beverage production facilities looking to upgrade or expand capacity while maintaining a compact footprint and streamlined integration into existing conveyors and handling systems. Technical Specifications & Performance Data Manufacturer: SACMI Year: 2008 Label type: OPP foil (roll-fed) Production speed: 12,000 bph (nominal) Bottle formats: 1.5L, 0.6L, 0.33L Container material: PET Advanced Automation & Control Systems The OPP roll-fed concept leverages hot-melt application at the leading and trailing edges of the label for secure wrap-around results. The design supports stable bottle handling, precise label feed, and consistent cutting for high-quality presentation. Controls are straightforward for operators, with clear access to key adjustments and process parameters to support quick setup and format changes. Production Line Integration Capabilities Blsdsxvpd Uopfx Amgsp This labeling machine integrates easily into complete bottling lines and industrial packaging systems. It can operate inline with upstream filling and downstream inspection, packing, or shrink wrapping equipment. Format changeovers accommodate common PET bottle sizes such as 0.33L, 0.6L, and 1.5L, allowing multi-product flexibility across beverage portfolios within a single production line. Machine Condition & Maintenance History The unit has approximately 10,000 working hours. It is currently disconnected from the line but can be powered to demonstrate bottle transport. The machine can start and run, with label gluing disabled for demonstration purposes. Technical documentation is available, supporting commissioning, operation, and maintenance. Overall, the machine presents as a well-kept second hand asset suitable for facilities seeking reliable labeling performance at medium speeds. Operational Performance & Versatility Optimized for PET bottle labeling with OPP film, the machine delivers consistent wrap-around application across multiple formats. It is suitable for beverage production scenarios where high presentation quality and material efficiency are important. The roll-fed approach offers a cost-effective alternative to pre-cut labels while maintaining r...

Condition: used, Year of construction: 2000, Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour Technical Description of the Used Wrap Around OCME ALTAIR N/50 The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour handles PET and glass containers using high-efficiency wrap-around carton packaging. OCME manufactured this ALTAIR N/50 model in 2000 to support high-capacity bottling lines. As a result, the machine provides a robust and reliable solution for secondary packaging operations. Currently, the machine remains in storage; however, the team has preserved it under controlled conditions to ensure its operational integrity. Furthermore, its compact and modular structure allows manufacturers to install it in both existing and new production layouts. Configuration and Operation The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour uses a straight-line infeed, which consistently guides containers into the carton-forming area. Once bottles enter, the machine folds the carton blank around them and seals it during the same cycle. In particular, its mechanical synchronisation allows the forming, folding, and gluing phases to occur smoothly and efficiently. As a result, the unit maintains high packaging precision. Moreover, technicians can perform format changes quickly, thereby reducing downtime. In addition, the simplified layout improves accessibility for maintenance and adjustment. Because of this, operators can optimize changeovers with minimal training. This machine handles bottle formats of 0.75 L and supports the following carton configurations: 3×2, 3×4, and 3×6. This versatility makes it suitable for various production needs and packaging formats. Performance and Output Capacity The Used Wrap Around OCME ALTAIR N/50 3300 boxes/hour processes up to 3300 cartons per hour, regardless of whether it uses the 3×2 or 3×4 format. In the 3×2 configuration, the machine packages 19,800 bottles per hour. In contrast, the 3×4 configuration handles 39,600 bottles per hour, since each carton contains 12 bottles. Thanks to this flexibility, operators can respond quickly to shifts in production demand. In fact, the mechanical setup supports high-speed operation even under heavy workload. Consequently, the machine guarantees steady performance across a wide range of applications. Furthermore, engineers can rely on its repeatability to maintain strict packaging standards. Bljdpfx Aowrpnbemgep Safety and Compatibility OCME equipped the Used Wrap Around OCME ALTAIR N/50 with integrated safety systems. These include photoelectric barriers, emergency stop buttons, and protective guards in every hazardous area. Therefore, the system complies fully with European safety standards. Moreover, it ensures a safe working environment without compromising productivity. The machine works seamlessly with both PET and glass containers. This compatibility enables production teams to use it across diverse product lines. In addition, it accommodates format switching without recalibrating the entire system.

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph Bledpsvgva Ujfx Amgep The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives. Bedpsvgvl Refx Amgslp

Condition: used, machine/vehicle number: LC433, Processing and Filling Line for Dairy Products up to 20,000 L/DayThis processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations.Packaging CapabilitiesThe line’s specialized packaging system handles a wide range of dairy products with defined hourly throughputs. Milk is packed in 1.0-liter PVC bags at 2,400 pieces per hour. Yogurt and kefir are filled in 410-gram and 180-gram containers at 3,000 pieces per hour, and also in 0.5-liter and 1.0-liter PET bottles at 1,000 pieces per hour. Sour cream is dosed into 410 g and 180 g containers as well as into 1,000 g bowls, each at 3,000 pieces per hour. Fresh cheese is packed in 5.0 kg and 10.0 kg containers, while sliced cheese is packed in vacuum foil packs of 500 g and 1,000 g.The 410 g containers have a diameter of 95 mm and the 180 g containers a diameter of 75 mm. The PET bottle line is configured for 38 mm caps. Indicative shelf life is 5 days for milk and 20 days for yogurt, kefir and sour cream.Equipment SpecificationsThe equipment was manufactured in Italy, Slovenia and Serbia between 1999 and 2016. The milk reception section is based on a BEOINOX unit with digital counters and foam removal system updated in 2014. Cold storage consists of three horizontal lactofreeze tanks of 3,200 liters each (freon cooling) and two vertical tanks of 3,000 liters each.The pasteurization block (Scremac, Italy, year 2000) includes a flow pasteurizer with retainers, a self-cleaning separator and a homogenizer, each with a capacity of 2,000 liters. The process is designed for a maximum temperature of 95–98 °C with a 15-minute holding time.Fermentation Units and Filling LinesFermentation is carried out in two BEOINOX insulated duplicators with double walls and planetary mixers (2,000 liters and 1,000 liters, both 2010), ensuring product uniformity.Multiple automatic fillers cover the full product range:- Automatic two-row filler for sour cream into bowls (up to 3,000 pcs/h)- Automatic filler for sour cream and yogurt in 410 g containers (2014, up to 3,000 pcs/h)- Automatic filler for yogurt and sour cream in 180 g containers (2008, up to 3,000 pcs/h)- Filler-capper-inkjet with automatic tunnel for 1.0 L and 0.5 L PET bottles (2016, up to 1,000 pcs/h)- PREPAK IS 3 filler for milk and yogurt in 1.0 L PVC bags (up to 2,400 pcs/h)- Two Videojet automatic date markersEquipment Complements and MaintenanceThe line is completed by a BEOINOX triblender 500 L for milk powder reconstruction (2015), a BEOINOX insulated cheese tub with HARF of 1,600 liters (2008), a vacuum packaging machine for cheese with new compressor, a 10,000-liter KOTA cold-water unit (freon), automatic CIP system (3 × 300 liters), a semi-automatic blowmolder for 1.0 L and 0.5 L bottles with Boge compressor (2010), a complete cooling system for the finished-goods warehouse (also used for heating/cooling the fermentation chamber), a solid-fuel (wood) boiler 250 kW, a monopump and a mini laboratory.All equipment has been regularly maintained until production stopped in 2020.In conclusion, t... Bledpjvgvrwofx Amgsp

Condition: used, Year of construction: 2007, Used Blow Molding Machine Sipa SFR 16 Assessment of Heating System and Preform Feeding Firstly, a comprehensive evaluation of the entire oven system is imperative, encompassing turning-over ramps and tension wheel guides, to ensure an efficient and seamless bottle forming process. Evaluation of Transfer Arms and Cams of the Sipa blower Bledpfjvgvtusx Amgop An indispensable aspect pertains to the scrutiny of transfer arms and cams. These components play a pivotal role in maintaining a continuous and uninterrupted production flow. Furthermore, meticulous inspection of their functionality is essential to uphold the quality and precision of the blow molding process. Condition of Molds and Stretching Mechanism Equal emphasis is placed on assessing the condition of molds and the stretching mechanism. The accuracy and integrity of the molds are pivotal in producing flawless, high-quality bottles. Consequently, conducting a thorough assessment of these components is essential to ensure optimal machinery operation. Examination of Water and Air Circuits in the Sipa blower Subsequently, the integrity of water and air circuits, integral components for preform cooling and pressure control during the blow molding process, is scrutinized. Ensuring proper circulation of water and air is crucial for maintaining stable working conditions and guaranteeing the quality of the final product. Technical Specifications and Additional Details In terms of technical specifications, pertinent details are provided regarding available SKUs and the weight of PET preforms per SKU. Specifically, for 0.5 L, the weight is 14 g, for 1.0 L, it is 26 g, for 1.5 L, it remains at 26 g, and for 2.0 L, it ranges from 29-31 g. It is important to note that the existing molds of the Sipa blower will not be supplied with the machine; replacement is at the discretion of the buyer. Additionally, the preform neck is specified as Corvaglia 28. Further technical details include the identification of the electrical cabinet and Command panel PLC of the Sipa blower as Siemens S7, along with the total number of cavities, which amounts to 16. Main observations on blowing machine Oven and the Preform in-feed Condition of the Following:  Oven, Turning-over ramps _ guiding and tension wheel  Heating modules, Oven ventilation and Cooling shields  Transfer arms and Cams  Moulds and Stretching mechanism  Water and Air Circuits All these are in great conditions  Number of SKUs and PET preform weight per SKU 0,5 L: 14 g 1,0 L: 26 g 1,5 L: 26 g 2,0 L: 29-31 g The existing molds will be supplied along with the machine. Current bottle drawings can be supplied as well. You will replace them if you want something different. Preform Neck Alaska 3-start Electrical cabinet and Command panel PLC: Siemens S7, great overall condition

Condition: used, Year of construction: 2007, Used Palletizer ACMI RASAR P180 2200 plastic crates – hour General Features of the Automatic Palletizer The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour is a conventional automatic low-level palletizer designed to optimize end-of-line operations in high-speed bottling processes. Specifically, the Italian manufacturer ACMI built this model in 2007. As a result, it delivers a nominal capacity of 2200 plastic crates/hour, which ensures high productivity. In particular, it suits bottling lines that handle 1-liter formats in both glass and PET. Moreover, the system prioritizes reliability and speed in demanding industrial settings. Compatibility with Bottle Crates and Pallets The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour efficiently handles crates containing 12 glass bottles. Consequently, it proves ideal for beverage production environments where crate-based transport is standard. Furthermore, the machine processes standard CP1 pallets (1000×1200 mm), ensuring compatibility with common logistics solutions. In addition, it includes an integrated pallet magazine, which significantly reduces the need for manual intervention. This, in turn, contributes to continuous and automated operation. As such, it streamlines the entire end-of-line workflow. Movement System and Automation This model features a low-level movement system. Not only does this simplify the mechanical layout, but it also facilitates maintenance access. Therefore, operators can perform inspections and servicing more efficiently. A Siemens PLC manages the palletizing cycle, thereby guaranteeing precise control and high reliability. Additionally, the PLC allows seamless integration with upstream and downstream equipment. In short, the automation setup supports complex configurations while maintaining ease of use. Safety Functions and Technical Documentation Bjdpowimlxefx Amgolp The Used Palletizer ACMI RASAR P180 2200 plastic crates-  hour includes all required safety features to comply with current industrial regulations. Specifically, it comes with physical guards, presence sensors, and interlocks. Thanks to these features, the system protects operators during operation and maintenance. Besides, it includes complete technical manuals. These documents, in turn, support technicians during installation, configuration, and servicing. Consequently, the equipment offers not only performance but also compliance and maintainability. Current Condition and Recommissioning Potential Currently, technicians have dismantled the Used Palletizer ACMI RASAR P180 2200 plastic crates – hour. Therefore, transport and storage become significantly easier. Additionally, the modular construction reduces both time and effort during recommissioning. As a result, companies can quickly reintegrate the machine into existing production lines. Technical Conclusion of the Used Palletizer ACMI The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour offers a highly specialized and reliable solution for manufacturers who need high-capacity palletizing systems.

Condition: used, Year of construction: 2013, operating hours: 1,700 h, machine/vehicle number: M292, Used Filling Monoblock Alfatek for olive oil 1500 bph General Features of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH The ALFATEK MBV 9/1 VOLUMETRICA SABRY filling monoblock, built in 2013, offers an efficient and reliable solution for bottling edible oil. It operates at a speed of 1500 bottles per hour, with clockwise rotation and a fully automated workflow. In fact, the machine currently runs in active production, having completed approximately 1700 operating hours. Moreover, it includes all safety protections, user manuals. Container Compatibility and Supported Formats The Used Filling Monoblock Alfatek for Olive Oil 1500 BPH handles a wide variety of containers. Specifically, it works with both PET bottles and metal cans, supporting the following formats: PET 138x138xh253 mm PET 148x148xh320 mm PET 81x81xh236 mm PET 63x63xh184 mm Cans 150x92xh192 mm Cans 150x92xh261 mm Cans 149x120xh315 mm Consequently, the machine adapts easily to diverse packaging needs. Whether the production involves small household bottles or larger industrial formats, this monoblock provides the required flexibility. Additionally, this versatility reduces the need for multiple machines, optimizing both space and investment. Bjdswiu Rvopfx Amgelp Filling Section: Volumetric Technology The filling section of the Used Filling Monoblock Alfatek for Olive Oil 1500 BPH uses 9 volumetric valves. These valves deliver accurate and repeatable dosing, which is especially important for high-viscosity products like olive oil. Notably, the system uses fixed valves and operates in a non-isobaric configuration. Therefore, it suits still liquids and avoids the complexities associated with pressurized systems. Furthermore, the volumetric method helps maintain product integrity while minimizing waste and overfill. Press-On Capping: Compatibility and Sizes The machine applies plastic press-on caps using one capping head, which supports multiple cap dimensions: Ø51.5 x 23 mm Ø37.5 x 22 mm

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Automatic FROMM PM100002 Industrial Strapping Machine – Year 2022 – PET Strap – Automatic Wooden Slat Insertion System FROMM Packaging Automation industrial automatic strapping machine, model PM100002, manufactured in 2022 and designed for integration into an automated production and packaging line. The machine is particularly suitable for the automatic strapping of bundles, profiles, long products and industrial packages. Identification details Manufacturer: FROMM Packaging Automation S.r.l. Model: PM100002 Year of manufacture: 2022 Project number: 2110304 Serial number: 48.100002.057 Original delivery date: 19 September 2022 Machine configuration FROMM MH550 side-mounted strapping head KB4 strap dispenser Lower side magazine for wooden slats Automatic slat lifting system Automatic magazine movement Strapping arch Pneumatic system Electrical cabinet and control system Prepared for integration and communication with an automated production line Technical specifications Strap type: PET/plastic strap, 16 × 0.8 mm Strap feeding speed: 5.3 m/s Strap recovery speed: 5.3 m/s Adjustable tensioning force: 0.5–3.5 kN Final tensioning speed: 105 mm/s Power supply: 400 V – 50 Hz Maximum installed power: 3.8 kW Maximum current: 9.8 A Minimum compressed-air pressure: 6 bar Bjdpozq Df Njfx Amgjlp The FROMM MH550 is a heavy-duty industrial strapping head designed for demanding applications, with a maximum tensioning force of approximately 3,500 N and friction-weld strap sealing. Documentation included. Only 108.000 cycles The machine is supplied with extensive original FROMM documentation, including: Complete instruction manual Electrical diagrams Pneumatic diagrams Spare-parts lists MH550 strapping-head manual KB4 dispenser manual The equipment was originally supplied as partly completed machinery intended for integration into a complete production line. The relevant Declaration of Incorporation is available.

Condition: used, Year of construction: 1998, Overview This SIDEL SBO 10/14 Series 1 is a rotary PET stretch blow moulding machine with 10 blowing stations, producing up to 12,000 bottles per hour. It has been used for the production of 1.5 L and 2.0 L PET water bottles with PCO 1810 neck finish. Blsdpfx Aszrhr Asmgjp The machine is still installed and in production, can be visited in operation, and is available for immediate sale. Technical data - Manufacturer: SIDEL - Model: SBO 10/14 Series 1 - Year of manufacture: 1998 - Machine type: rotary stretch blow moulding machine for PET bottles - Blowing stations: 10 - Capacity: up to 12,000 bph - Formats: 1.5 L and 2.0 L PET bottles - Neck finish: PCO 1810 - Installed power: 310 kW - Electrical supply: 400 V / 470 A Condition Used - in production, still installed and under power. The machine remains a reliable solution for water, beverage and other PET packaging applications. Availability Immediately available. Location: Slovenia. Dismantling, handling, packing and truck loading can be quoted on request (EXW).