Used Pig Scales for sale (2,291)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive Dcedpfx Aeyid Hvecpjn • Tool holder: SK40 • Tool changer: SMTC • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2008, Wire erosion / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 310 mm max. workpiece size X: 1050 mm max. workpiece size Y: 820 mm max. workpiece size Z: 300 mm max. workpiece weight: 1000 kg with AWF ( Automatic Wire Feeding ) U / V axis: 200 / 200 mm submerged cooling unit FANUC Series 310iS-WA5 control Djdpfx Acoz D U H Uopjcn Automatic Wire Feeding (AWF) Additional precision rotary/indexing unit by Detlev Hofmann 6 axes according to the machine control Chiller included Work area lighting Glass scales on X/Y axes Touch probe Work tank interlock and wire break detection Machine weight: approx. 3,000 kg Connected load: 13 kVA

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,000 rpm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: 426, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Soraluce SP 8000 was manufactured in 2000. It features an impressive X-axis travel of 6,500 mm, Y-axis travel of 1,250 mm, and Z-axis travel of 2,000 mm. The machine is equipped with a high-torque spindle motor and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Soraluce SP 8000 universal machining centre we have for sale. Contact us for further details. • Max. feed rate: 15,000 mm/min • Guideways: Heavy-duty linear/roller guideways with linear scales • Milling head: Automatic Huré-type universal head, 2.5° x 2.5° automatic indexing on both bodies • Spindle: taper ISO 50 / SK 50 (DIN 69871); direct/gearbox-driven high-torque motor Dsdpfx Aozumgkscpjcn • Tool changer and magazine: ATC with 30-tool chain-type, column-mounted; supports heavy-duty tooling (weight/length per standard) • CNC control: Heidenhain iTNC 530 / TNC 640 or Siemens Sinumerik Additional equipment • Chip conveyor (longitudinal, between table and column) • Coolant system (external supply to tool/head) • Enclosure (partial/perimeter protection) Technical Specification Taper Size ISO 50

Year of construction: 1990, condition: ready for operation (used), travel distance X-axis: 400 mm, number of axes: 3, Surface grinding machine manufactured in 1990. This GEIBEL & HOTZ FS 40 SA features a maximum grinding length of 400 mm and a grinding width of 200 mm. It has a maximum workpiece weight capacity of 150 kg and a clamping surface of 600 mm in length. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ FS 40 SA machine we have for sale. Contact us for further details. Djdpfx Ajz D Ty Hjcpscn - Max. Grinding Length: 400 mm- Max. Grinding Width: 200 mm- Max. Working Height: 300 / 330 mm- Max. Workpiece Weight: 150 kg- Clamping Surface / Table Length: 600 mm- Clamping Surface / Table Width: 200 mm- T-Slots DIN: 14H7- Number of T-Slots: 1- Spindle Diameter in Front Bearing: 35 mm- Additional Equipment / Accessories: - Digital Readout / Scale - Cross Clamping - PMF 50 - Electric Dressing Device - Stepless Cross Feed

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 Dcodpfx Ajymf Rtocpon • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: good (used), functionality: fully functional, Technical details x-travel 1100 mm y-travel 600 mm z-travel 510 mm Table dimensions 1300 x 600 mm table load 1,0 t tool taper ISO 40 DIN 69871A spindle turning speed range 60 - 12000 U/min rapid traverse 32 m/min power capacity 10 / 17 kW no. of tools in the magazine 32 Stück tool length - max. 300 mm Tool diameter 76 / 127 mm weight of tools max. 8 kg tool changing time 2,5 sec total power requirement 30 kW weight of the machine ca. 8,5 t Dcedpfx Asz D A Hcscpen dimensions of the machine ca. 4400 x 2250 x 2920 mm Accessories Infrared measuring device Additional information Machine with only 3.275 spindle running hours ! * Heidenhain iTNC 530 CNC control * 32-station ATC * Internal coolant system: 20 bar * Coolant tank: 480 l * Chip conveyor * Heidenhain glass scales in X/Y/Z * Oil-cooler * Infrared measuring device

Condition: new, cutting diameter 410 mm capacity 90 degrees: flat 540 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: flat RE 400 x 210 mm capacity 45 degrees: round RE 400 mm capacity 45 degrees: square RE 260 x 260 mm capacity 45 degrees: flat LI 380 x 170 mm capacity 45 degrees: round LI 340 mm capacity 45 degrees: square LI 260 x 260 mm capacity 60 degrees: round 260 mm capacity 60 degrees: square 175 x 175 mm turning speed range: 20 - 80 m/min saw band length 4290 x 34 x 1.1 mm work height max. 865 mm voltage 400 V engine output ca. 3.0 kW weight of the machine ca. 686 kg range L-W-H 2340 x 1430 x 1550 mm The MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, this model guarantees precise cuts when cutting hollow profiles, solid materials, stainless steel, tool steel, etc. This machine is used in metalworking shops, repair shops, mold and tool making, ... Features: - continuously variable cutting speed * for optimal adjustment to the workpiece (20â??80 m/min) - Increased cost-effectiveness thanks to semi-automatic operation - Choice of manual or semi-automatic sawing mode - Adjustable vise; clamping is manual or hydraulic - Swivel range of the saw frame (-45° to 60°) readable via a degree scale - Professional band saw offering good value for money - Smooth, vibration-free operation ensures high cutting accuracy - Optimal power transmission to the drive wheel * via a hardened and ground worm shaft and bronze worm gear Dcodpez D It Iofx Acpon - Adjustable hydraulic cylinder for regulating the contact . pressure of the saw frame - Saw blade guidance via a combined roller-and-jaw guidance system * with carbide inserts Semi-automatic operation: - Hydraulic clamping of the vise - Hydraulic lowering of the saw frame - Lifting of the saw frame Scope of delivery - Saw blade - Workpiece stop - Base frame - Pressure gauge for band tension - Band saw guide with carbide inserts - Hydraulic quick-clamping vise - Coolant system - Hydraulic lowering cylinder - Motor protection switch - Automatic limit switch

Condition: new, Cutting length 4300 mm Cutting height 2150 mm automatic , ELCON precision panel saw type D 215 ----- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----- Technical description: Dcodpfx Acoi Hc S Djpon Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----- Special price "Partnership Edition" ex works in this version: on request! ----- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,990.00 plus statutory VAT ----- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----- Technical information according to the manufacturer - without guarantee!

Condition: new, Number of sanding units 4 St sanding width 190 mm Sanding height max. 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single wood sander with additional Transverse brush sanding unit (discs) and Longitudinal brush sanding unit (roller) for sanding Solid wood such as B. window wood etc. Stable top version with long cast tables and Conveyor belt feed. Suitable for high continuous loads even with higher chip removals. 1. Belt sanding unit with CERMET sanding shoe pre-sanding 2. Disc aggregate cross grinding for defibering 3. Rolling aggregate longitudinal grinding for directional finish Direction of growth - Staggered sanding and finishing units at the top and below - directly driven rubberized sanding rollers for slip-proof free power transmission - Combined grinding via roller and shoe for high chip removal with a flat intervention zone at the same time - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - integrated brush grinding device (transverse and Longitudinal) with sanding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, 1000mm long cast iron tables with a finely planed surface and spring-loaded Pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor infinitely variable for quick adaptation to different types of wood - all motors electrically protected - ergonomically arranged controls on the Dedpfx Acsyrty Hepecn Workpiece inlet side - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - two brake motors for 5.5 kW drive - Feed motor 1.0 kW - Feed speed 4-20m/min. - automatic height adjustment 0.37 kW - Brush sanding units Disc D=max. 200mm Roller D=max. 270mm - Suction nozzles 2 x 120mm and 2 x 180mm - Pneumatic connection 6 bar - Working height 870mm External dimensions: - Length 2600mm - Length with wheels 2985mm - Width 880mm - Height 1910mm - Weight approx. 1500 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - ...

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: The machines remained in working order at our customer's site until they were dismantled ----- 1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines. 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for Djdpfxoxa Hi Ns Acpocn the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW ...

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. Dsdsfyadbepfx Acpjcn The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, Year of construction: 1988, Technical details: Dsdeu Ib Dfepfx Acpscn plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: used, Technical details: voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale Dodpfx Asu Ngfdscpjcn *

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision Dcodpfx Aevnv Tqecpjn shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale Dedpfeu Ngrqox Acpjcn magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition Dcjdpfx Aew Rdybecpon • Mechanism operates smoothly and easily • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: excellent (used), For sale: professional KOMET KFK 1 M02 02360 boring head with micrometric adjustment – a top-tier tool for high-precision hole machining in industrial production and toolrooms. Very good condition – the tool is fully functional and ready for operation. The precise micrometric scale allows adjustment with an accuracy of 0.01 mm, ensuring the highest surface finish quality. • Manufacturer: KOMET • Model: KFK 1 – M02 02360 • Mount: SK40 / DIN 69871 • Scale: micrometric 0.01 mm • Range: precision boring and finishing of holes • Condition: used – very good technical and visual condition. Dsdpfoxk T H Nox Acpecn

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 3420 € Dcsdpfxjwir A No Acpsn 2000 x 1000 mm 850 mm 8000 kg 712 kg 200 mm 28 mm - Fully milled table top 25 mm in S355J2+N with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes - Hard chrome-plated table surface Cr75 The main advantage of our tables compared to conventional systems is with the hard chrome plating Cr75, that this process achieves a much deeper penetration into the base material of up to 0.07 mm and the hardness of the surface reaches up to HV750. This also ensures optimum and lasting anti-spatter adhesion on the surface, which is one of the most efficient on the market. - Exact dimensional and fitting accuracy of the tools with 28 mm perforation (compatible with comparable premium suppliers) - Grid lines 100 x 100 mm - 4 solid table feet withload capacity 2 ton/feet and levelling option - Different foot variants available (standard, height-adjustable and with castors) - Load capacity 8 to - All-round 200 mm high side cheeks with diagonal perforation - 2-sided millimetre scaling - Substructure with stiffeners OPTION (PRICE ON REQUEST): Diagonal holes

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2697 € 2000 x 1000 mm 3000 kg 348 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 2000 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Dodjyq Srrepfx Acpecn Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2022 € 1500 x 1000 mm 3000 kg 272 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, 1500 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs Dcodpfx Aeyq Srxecpsn * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 2 h, load capacity: 33,000 kg, lifting height: 4,500 mm, fuel type: diesel, mast type: simplex, construction height: 4,290 mm, power: 185 kW (251.53 HP), fork carriage width: 3,400 mm, fork length: 2,400 mm, empty load weight: 40,700 kg, total length: 6,940 mm, drive type: Diesel, construction width: 3,450 mm, Diesel forklift Load center: 1200 Fork width: 300 mm Fork thickness: 110 mm ISO class: Terminal West Mast type: Standard Transmission: DANA 14000 Condition: Ready for use and fully functional Technical condition: New Front tire type: Pneumatic Dcsdpfez Ecu Ajx Acpon Front tire size: 16.00-25 Rear tire type: Pneumatic Rear tire size: 16.00-25 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and reach trucks in our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Lease purchase and financing options at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this DCG330-12. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and special construction for forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale at our location. Side shifter, fork positioner, Heater, full cabin, air conditioning, scale,

Year of construction: 2008, condition: excellent (used), Bizerba CWL Eco flex conveyor scale with Sick VMS520 volume measurement system Bizerba CWL Eco flex conveyor scale Dynamic weight measurement with volume determination The CWL Eco flex can be integrated into existing package shipping, sorting systems, and infeed lines with virtually no effort. Bizerba WM-CWL flex conveyor scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Special features: • Non-contact, active measurement method • Measures the length, width, and height of cuboid-shaped objects • Measures the length, width, and height of objects with virtually any shape • Works with various surface structures and on different flat conveyor systems • Flexible system configurations Dcsdpfx Acsmgax Uepon • Calculation of the smallest enclosing cuboid (box volume) • Calculation of the actual volume Device components: Sick VMD520-2000 volume measuring device Sick CLV 490 stationary barcode scanner Year of manufacture: 2008 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: 6165011005, functionality: fully functional, power: 2.5 kW (3.40 HP), cutting height (max.): 335 mm, cutting width (max.): 460 mm, pivoting range: 60 °, rotational speed (max.): 110 rpm, rotational speed (min.): 20 rpm, total height: 1,932 mm, total length: 2,763 mm, total width: 2,502 mm, overall weight: 2,100 kg, table height: 700 mm, year of last overhaul: 2020, Equipment: CE marking, documentation/manual, This machine has never been used in production and has only served as a demonstration model in our showroom. New price: €50,900,- excl. VAT Fixed selling price: €39,500,- excl. VAT Fully hydraulic production band saw machine, heavy-duty design, for machining light to heavy materials, profiles, tubes, and solid stock in all grades. For both 90° and miter cuts. The smooth swiveling of the sawing unit allows for stepless and quick adjustment of any desired miter angle, using a clearly readable adjustment scale: one-sided up to 60° (acute angle 30°). Straight cuts and miter angles up to +45° can be cut automatically. Angles larger than 45° up to 60° are cut in a semi-automatic cycle. The stepless adjustable band speed and feed rate ensure the best results in terms of cutting performance and tool life. The standard Advanced Control system offers optimal machine operation. 99 sawing programs (length/quantity combinations) can be easily programmed in advance. After the programmed number of pieces has been reached, the machine switches off automatically. Dodpfxsz I Tgzs Acpjcn When used automatically, the minimum non-cutting time ensures maximum output. The precise ball screw drive in the material feed guarantees exact material length positioning.

Condition: used, Checkweigher for boxes and crates This checkweigher weighs boxes, crates or larger packs on a weigh platform with rollers. The product rolls across the scale, the weight shows straight away on the touchscreen and you can see per product whether it is within limits. The machine is compact, made of stainless steel and stands on adjustable feet. The screen holds product data and statistics per item. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. Dcjdpjz Nc Spsfx Acpen More photos and full specifications: / Type: Checkweigher with roller conveyor Weigh platform: Roller conveyor Controls: Touchscreen with product data and statistics Construction: Stainless steel, on adjustable feet

Year of construction: 2012, condition: as good as new (ex-display), functionality: fully functional, This particular unit is from 2012 but has only been used as a display model. It is therefore in absolutely like new and has never been in full-scale production. This model (CA Series) is a custom-designed stretch wrapper built for wrapping products placed on cardboard trays, cardboard bottoms, or underlying cardboard supports. The machine has an integrated chain-driven carrier system (pusher system) that feeds the trays through the shrink-wrap ring to ensure stable and protective packaging. Dodpfxsy N Uqve Acpocn Typical applications: Products on cardboard trays/cardboard supports: Ideal when items need to be secured to an underlying cardboard base before transport. Bundling and securing: Effective for holding together and protecting smaller units or panels mounted on cardboard backing. Protection against external influences: Provides flexible and tight protection against moisture, dust, dirt, and damage during transport. The machine is available for immediate delivery. Shipping costs apply.