Used Piston Rod for sale (4,276)

Condition: like new (used), Year of construction: 2018, operating hours: 3,769 h, Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Pgjdpsy T Icgjfx Ai Dsr Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Year of construction: 2023, condition: new, Unused item! Variable displacement pump, axial piston with swash plate design, for hydrostatic drives in open circuit. The new price was EUR 14,000.00 net. Mannesmann Rexroth replica, new part. The flow rate is proportional to the drive speed and displacement and can be infinitely adjusted at constant drive speed. Manufacturer: Zhen Yuan Model: A7VO355DR/63R-VPH02 Year of manufacture: 2023 Nominal size: 0-355 cm³ Control device: pressure regulator Displacement: 355 cm³ Max. speed: 1320 Podpfozt Iq Ujx Ai Dsgr

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System For a wide range of requirements Scheugenpflug piston dispensing systems operate on the principle of volumetric dispensing; the quantity of material dispensed is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a connected material supply system. When a two-component medium is used, the ratio of resin to hardener is simultaneously determined by the volumes of the two cylinders. The dispensing pistons simultaneously force both components through separate channels toward the outlet valve, where they only mix within the static mixing tube to form a homogeneous, reactive medium. The DOS P016 / 050 / 100 / 300 / TCA piston dispensing systems are high-precision volumetric units designed to process both single-component (1K) and two-component (2K) materials, covering a wide spectrum of application requirements. Precisely dimensioned dispensing cylinders ensure the delivery of reproducible material volumes. For 2K materials, the parallel emptying of both cylinders into the shared mixing tube ensures a consistently stable mixing ratio at all times, thereby guaranteeing maximum process reliability. At the same time, this method allows for the gentle handling of potting media that are sensitive to pressure, moisture, or shear forces, without the risk of material degradation. Users also benefit from quick and easy maintenance, long service lives, and significantly reduced upkeep costs. Optional features—such as valve monitoring, mixing tube heating, or dispensing head heating—allow these systems to be flexibly adapted to specific application requirements. Your benefits Dosing accuracy independent of temperature, pressure, or viscosity Constant mixing ratio at all times due to parallel emptying of dosing cylinders Wide range of applications (in terms of materials and use cases) Key functions Simultaneous cylinder discharge via a shared stroke mechanism ensures a homogeneous mixing ratio Sensor-based monitoring of inlet and outlet valves as well as cylinder filling Material temperature control via mixing tube heating (optional) Camera-based dispensing needle monitoring (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to high-viscosity Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and casting resin viscosity Precisely reproducible and highly accurate results Maximum process reliability Applications Potting, sealing, bonding, application of thermal interface materials, sealing, encapsulation (Glob Top) Pedpfx Aiezc Npls Degr DOS P016 Max. volume/shot (2K at 1:1 ratio) 1K: 0.06/17 ml 2K: 0.1/32 ml Max. dispensing speed [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatability [°C]: up to 80 Outlets: 1K: 1–4, 6, 8 2K: 1–4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on operation "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional dosing units—new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2023, operating hours: 43 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-06-150 (10 bar) with 150 liter compressed air tank The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 4.0 kW Pgsdpfx Aoxc Hzksi Dor Delivery quantity at 7 bar: 450 l / min Compressed air outlet: 1/2 " Dimensions length x width x height: 1357 x 507 x 1070 mm Weight: 169 kg Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: ready for operation (used), L & Z Lathe WEILER Condor -Condition of guideways: "Good" -Optional 3-axis digital display -Center height 165mm -Swing over bed 330mm -Distance between centers 800mm -Spindle speed range 28-2800 rpm -Automatic longitudinal / crossfeed -Spindle bore approx. 40mm -Threading capabilities / Metric / Inch, etc. -Collet chuck - quick-change system -Four-jaw chuck -Multifix base and insert -Chuck guard -Coolant system -Emergency stop -Documentation Dimensions: L x W x H 2.0 x 0.8 x 1.6 meters / Weight 850 kg Pgjdpfx Aezta Dmsi Der

Condition: used, Year of construction: 2015, Cutting and machining center, FTB 100 A2 2S3 NFZ Feed direction from right to left Windows 10 min. cutting length (PVC only): 296 mm min. part length (PVC with steel): 300 mm max. part length (PVC with steel): 4,000 mm max. profile depth: 130 mm max. profile height: 130 mm Automatic feeder magazine for manual loading, for 12 profiles with a min. length of 600 mm and a max. length of 6,500 mm: 8 axes - CNC - machining station A2 - 3 CNC axes X, Y, Z - one 2-way spindle each, 0.75 kW 2 S 3 – Sawing station - 1x stepless swivel range of the saw from 45° - 135° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm - 1x saw 45° - Saw motor 2.2 kW + 3,000 rpm - Saw blade Ø 550 mm CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools Cross conveyor with buffer function CNC - 3 axes – Milling station for end machining of profiles: - with automatic tool changer for 16 tools TFT screen for steel length display - 12" TFT screen for displaying the steel lengths for manual steel insertion and insertion depth. Pedpfxozm Hr Rs Ai Degr Label thermal printer PF4i with LAN - with network connection for manual application of labels Laser e-SolarMark 30W - CO2 laser, 30 W power - 230V 50Hz / 115V 60Hz, 1PH, 700W ASE 100 S steel cutting and insertion - with feeder magazine with 12 slots Control panel steel profile loading ASE 100 - 15-inch TFT display touchscreen Double screw unit from above and below - automatic distance adjustment between the two screw units, motorized, screw spacing: min 155 mm / max. 500 mm Double dowel hole drilling station Ø 6mm and Ø 10 mm - with automatic adjustment to different profile types with 8 lateral positioning points 3-axis - CNC - machining station S, type L - one 3-axis tool carrier (twin module) for up to 18 machining units, equipped on both sides One locking component insertion station for a standard locking component for frame profiles - with vibrating hopper, bunker and locking component singulation - positioning for attaching the locking components Locking component insertion station via bar magazine - One locking component insertion station for a locking component for frame profiles and mullions/transoms, on one side. 2x screw unit for locking component inserter - automatic single screw unit for locking component insertion stations, positionable in the y-axis Cross conveyor magazine - for transporting the profiles for stacking Stacking and sorting unit, 3 axes - one stacking and sorting unit in a 3-axis design Carriage change station - one carriage change station for positioning two carrier carriages in the profile stacking position. Plant capacity: approx. 270 frame units in 7.5 hours with 85% availability approx. 130 mullions, posts, uprights with the following machining operations: Frame approx. 1200 x 1200 mm: 4 x cutting 2 drainage slots, rebate bottom 2 drainage slots outside/bottom 2 ventilation slots, rebate top Screws 4x/part 6-8 x standard locking component insertion for window 8 x sealing groove milling 2-3 x dowel holes vertical bars for window

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 002331512500001478, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 6.00 Bh Year: 2025 Maximum pressure: 14 bar Flow rate (14 bar): 500 l/min Nominal power: 4.0 kW Cylinder : 2 Mains voltage: 400 V Compressor speed: 785 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1112 mm Pgodoypm Sdopfx Ai Der Weight: 135 kg We always have a wide range of new and used compressors in stock!

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: AS7031917, power: 4 kW (5.44 HP), volume flow: 600 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 93 dB, Equipment: type plate available, Portable piston compressor, lightly used, in good condition. We bought it new in 2014 and had to convert to a screw compressor. The unit has always performed its job. Delivery to the Berlin-Brandenburg area is possible. At no additional cost to the buyer! Pedpjwak N Asfx Ai Dogr Demonstrations and test runs are available on-site.

Condition: excellent (used), Year of construction: 2015, Workpiece diameter: 1.0 – 25 mm Workpiece length with stop: up to 500 mm Smallest workpiece length: from 5 mm Longer lengths also possible without stop Cutting spindle approx. 5400/11120 rpm Grinding spindle 2160/4,450 rpm Cutting disc diameter 125 x 1.5 x 20 mm Grinding disc diameter 100 x 50 x 20 mm Dimensions and weight: Dimensions 800 x 450 mm x 1,100 mm Weight approx. 200 kg The precision length cutting machine was inspected and cleaned by me, defective components was renewed. The machine combines cutting and grinding in a single operation and is ideal for high-precision machining of small to medium-sized workpieces such as ejector pins, sleeves or punches. Pjdjzrp Tbopfx Ai Degr Ideally suited for: Tool and mould making Punching and forming technology Production of carbide and HSS tools Precision mechanics and manufacturing technology Combined cutting and grinding in one machine High precision with short cycle times Suitable for steel, HSS and carbide

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2019-21130, overall weight: 1,950 kg, pressure (max.): 300 bar, Equipment: type plate available, AIRCO PSAL 15 SN – Nitrogen generation system (PSA nitrogen generator), year of manufacture 2019, serial number 2019-21130. Manufacturer: AIRCO Systems GmbH, Frankfurt. Complete, turnkey PSA system for on-site nitrogen (N₂) generation – for example, for laser cutting machines, packaging, or process engineering. Equipped with an integrated AIRCO/Bauer MINI-VERTICUS high-pressure booster, control cabinet “NITROGEN N₂”, buffer tanks, and piping station. Technical data: – Type PSAL 15 SN (INMATEC technology) – Max. pressure 300 bar – Weight approx. 1,950 kg – Year of manufacture 2019, low operating hours, serviced (AIRCO Systems service) Pjdpfozlat Ejx Ai Dsgr Operates on electricity – Inspection with demonstration possible by appointment. Maintenance documentation available upon request. Dismantling/loading to be carried out by the buyer or by agreement. Payment before collection. Sale as is, excluding warranty. Export possible. Please include a call-back number with your inquiry.

Condition: good (used), Year of construction: 1982, Piston compressor Manufacturer: BOGE Type: SB m770 Year: 1982 Pgodpfx Aijxq Tlxe Dsr Max. pressure: 15 bar Tank: 500L. Low operating hours.

Condition: as good as new (ex-display), Type: PVXS-180-M-R-ES-0000-000 Part number: 8005062705C010 Design: open-circuit variable-displacement axial piston pump Control: electric displacement control Rotation: clockwise Displacement: maximum 180 cm³/rev Speed: maximum 1,800 rpm Rated pressure: 350 bar Maximum pressure: 420 bar Theoretical flow: maximum approximately 324 l/min Podjzvd S Tepfx Ai Dsgr Control motor: Georgii Kobold KOD 346-1A MB/S64 Control motor: 0.09 kW, 230/400 V, 1,400 rpm Brake: MB3, 2 Nm, 230 V, 15 W Gearbox: SPN Schwaben Präzision GF71 Condition: unused surplus unit, stored in a wooden transport crate

Condition: like new (used), Year of construction: 2001, We are offering this like-new Atlas Copco MD1000 reciprocating compressor, manufactured in 2001. Manufacturer: Atlas Copco Model: MD1000 Year of manufacture: 2001 Condition: like new Category ID: 1550 Type ID: 433 Type: reciprocating compressor Pgsdpfx Aioztzycj Dsr If you have any questions or would like more information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31524565, overall weight: 286 kg, available immediately: RENNER Riko 960/270 ST-KT piston compressor with galvanized 270 liter container with refrigeration dryer and time-controlled condensate drain with star-delta starter with metal buffer set for compressed air tanks Technical data: Motor power: 5.5 kW Rated voltage: 400V Pjdpfx Aowhxluji Dsgr Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 79 dB(A) Volume compressed air tank: 270 liters Dimensions L x W x H: 970 x 795 x 1880 mm Weight: 264 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, KAESER AS36 SCREW COMPRESSOR 22kW Technical specifications: Capacity: 3.47 m³/min (3470 L/min) Motor power: 22 kW Pressure: 7.5 bar Year of manufacture: 1994 Operating hours: 13,881h Pgodpsy Ic Hvjfx Ai Dor Net price: 8,200 Gross price: 10,086 The compressor is fully operational. Service support provided.

Condition: like new (used), The can seamer is the machine used to hermetically seal the lid to the can body before sterilization. Depending on the product, sterilization can also be performed before filling. The can is sealed by deforming and subsequently overlapping the metal layers of the can body and the lid through compression. Pedjzbi Niopfx Ai Dsgr The result is a type of hook between the two, which achieves a hermetic seal and, consequently, the airtightness of the container. This sealing requires a rubber gasket (sealing gasket) inserted into the rim of the lid to achieve the most effective bonding of the metal layers. Production will depend on the format and the product to be sealed.

Condition: good (used), Year of construction: 2005, functionality: fully functional, 400 l vessel, Podpfx Aoybbfioi Dsgr 3.8 kW, 10 bar, with condensate drain, used as a backup compressor, good condition Price ex location Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for sales to commercial customers.

Condition: used, Year of construction: 1987, Final compression pressure: 10 pe/bar Speed: 745 rpm Pgedpfx Aioxygbls Djr Volume flow: 3455 dm³/min Motor power: 22 kW

Condition: good (used), Stock number: 3051 Manufacturer: Schneider Year of manufacture: Model: 500-270 Psdpfx Ajxw H Ugji Dsgr Machine number: 95118451 Operating hours: Pressure: 10 bar Output: 393 l/min Tank Manufacturer: Behälterbau Burgau Year of manufacture: Tank number: 538394 Capacity: 270 l Pressure: 11 bar Temperature: -10°C to 50°C Connection: 3 kW Footprint: 650 x 700 mm Overall dimensions: 700 x 700 x 1,700 mm Weight: 150 kg

Condition: like new (used), Oil-less piston compressor Max. 8 bar Psdpfx Aioy Nd I Do Djgr

Condition: excellent (used), Year of construction: 2013, Airpress piston compressor model K 500 - 700 Super Motor power (HP/kW): 5.5 HP / 4.0 kW Compressed air tank volume (l): 500 Maximum pressure (bar): 15 Intake capacity (L/min): 700 L/min Output capacity l/min*: 450 L/min Sound level dB(A) (0 m): 99 Psdjyy U S Ujpfx Ai Degr Voltage (V): 400 V / 50 Hz / 3 phase Location: ex stock 54634 Bitburg - immediately available - Prior sale reserved

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Just set it up, plug it in, and let it run… Pgjdpfx Aieyxxmge Dsr

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Pedpovlw Haefx Ai Dsgr Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 10024031, overall weight: 197 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,970 mm, power: 4.8 kW (6.53 HP), Equipment: refrigerant dryer, type plate available, Stationary piston compressor with refrigeration dryer, fine filter, condensate treatment unit for oil-water separation, and automatic condensate drain, 270 l tank, robust design and top quality, fully automatic on/off operation. Equipped with all safety devices, completely ready for connection. From 7.5 kW upwards, standard equipment includes an automatic star-delta switch. Fifteen-year guarantee against rust penetration on the internally and externally hot-dip galvanized compressed air tank. Air outlet tank 3/4", air outlet refrigeration dryer 3/8", filling capacity approx. 520 l/min, automatic condensate drain AMD on the tank, automatic condensate drain in the refrigeration dryer, article number 2024712KK, recommended retail price: €4,049.00 Pgedpfx Aiozin Sko Dsr

Condition: new, Year of construction: 2026, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Pgsdpfx Aisq I Nw Is Djr