Used Rod Shear for sale (21,539)

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear used for a maximum of 40 hours only, maximum cutting capacity 3.5 mm sheet thickness, used exclusively for 1.5 mm coated sheets, hold-down opening 25 mm (can be reset to factory specification), stroke rate 56/min, light barrier, cutting angle 1.6°, rated power 4.0 kVA, weight 860 kg Bsdpfxexal Uwj Agcolr

Condition: ready for operation (used), Year of construction: 2002, sheet width 3230 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.75 mm no. of strokes 34 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control POS 100 air pressure 6.0 bar engine output 6.8 kW weight of the machine ca. 3510 kg range L-W-H 4070 x 2070 x 1400 mm Blsdexaaq Hspfx Agcsr Current new price including accessories approx. 70.000 Euro From a maintenance workshop Very good condition (!!) Special price upon request Features: - Robust / motorized swing cut guillotine shear - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * With SCHRÖDER NC POS 100 control unit * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Coarse adjustment via pushbuttons * Limit value protection with limit switches - "Duo-Cut" drive with two dynamic, powerful gear motors - Support table with recessed grips - Hold-down bar with hard rubber strip - All-steel blade - 1x side stop with T-slot and digital mm scale - 2x extended sheet support arms - Selector switch for single and Continuous stroke - 1x freely movable foot switch - Rear safety device (side guards) - Original operating instructions Optional accessories included: - Pneumatically controlled sheet support device for thin sheet blanks * Sheet removal / sheet slide to the front (operator side)

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Sheet width: 1250 mm Sheet thickness: 3 mm Machine weight approx.: 1120 kg Dimensions: 2100 x 2500 x 1500 mm Accessories: - Front sheet support arms with digital display - Safety guard at the rear of the machine - Manual rear stop with digital display Bjdoxwvw Rjpfx Agcslr - Foot switch

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Blsdev Tzphopfx Agcor Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms 1 angle stop pneumatic hold-down device Blodpfxor Ngtij Agcsr Backgauge to be operated by hand

Condition: good (used), You are bidding here on a brand-name guillotine shear from the well-known German manufacturer Schröder. Device features: - Cuts up to 2.5 mm steel according to the nameplate - Working length: slightly over 2.5 m - Back gauge: 750 mm Blodpfxew U Sryj Agcor - Side/winkel stop - Sheet metal chute - See pictures: machine has not been refurbished - Foot pedal - Weight: see image - In proper condition You will receive an invoice with VAT shown separately. Forwarding/shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and test run possible by appointment via phone. Payment in cash upon collection. If you have any other requests, please call me briefly – thank you. Collection should take place within 8 days after end of auction. Location: 97261 Güntersleben Item number: 250801

Condition: new, Year of construction: 2025, power: 2.2 kW (2.99 HP), ABKANTBANK technology KRUSE, Free delivery up to 150km. YOUR competent partner for SHEARS and BENDING BENCHES. We are your contact for high-quality sheet metal processing. Appropriate machines can be demonstrated if required, along with expert advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 3000/1.2mm Hydraulic GLT3050 - Working length 3050mm - Stable and robust design for steel plates up to 1.2mm - Large cast iron work table - Open design suitable for endless cuts - Back gauge with scale - Declaration of conformity - CE mark Dimensions: Length: 3500mm Width: 750mm Height: 1150mm Weight: approx. 1000 kg Passage: 80mm - Motor power 2,2 kW - Oil HL 46 - Compressive force 4t - Operating pressure 120-150 bar Shipping within Germany 330€ Blodpfxetctm Ho Agcer All prices are subject to 19% VAT. Collection by the customer is possible Cash payment on delivery

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. Bjdpfxoxyln Rs Agcjlr voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, sheet thickness steel (max.): 3 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, cutting length (max.): 3,200 mm, Selling a Schröder guillotine shear Model: MHSUV 3200/3.0mm with electric backstop up to 1000mm (see display) The guillotine shear has a sheet metal holding device for thin sheets to prevent ripples when cutting. The special thing about this guillotine shear is that the cutting material is placed at the front, which is rare with this size arrangement. Particularly advantageous for a smaller workshop. The control has a piece goods counter, etc. The knife cuts perfectly and the backstops work absolutely precisely. The guillotine shear is only being sold because we bought a 4-meter guillotine shear. Viewing and testing expressly desired! Sold without any guarantee or return! Bledpsvzh Tcefx Agcer Price plus VAT

Condition: new, Year of construction: 2025, Plate shears / guillotine shears 2500mm / 1.2mm NEW The stable construction creates an ideal prerequisite for precise cutting of sheets up to 1.2 mm thick. Available lengths are from 1.30M to 2.50M. Bsdjc I T Rkopfx Agcslr Prod Masz machines are synonymous with precision and durability. Our guillotine shears meet all requirements for a precise cut with high productivity. Advantages: high cutting performance, stable steel construction, perfect, is made with the technology of CNC Technical specifications: - Max. Thickness of the cut sheet 1.2mm, - Max. Working width: 2500mm the equipment includes a stop for setting the cutting depth and a frame for holding the sheet Dimensions: Length: 2900mm Width: 750mm Height: 1150mm Weight: approx. 600 kg Price: 7400 euros Delivery date: every week We look forward to your inquiry!!

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, YOUR competent partner for BENDING MACHINES and guillotine shears. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 2500/1.2mm - Working length 2500mm - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 3000mm Width: 750mm Height: 1150mm Bsdpfx Agonxlndecslr Weight: approx. 600 kg Clearance: 8cm Shipping within Germany 360€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: used, Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm Bljdpfxjxacd Ne Agcer from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving

Condition: new, Year of construction: 2025, Heavy-duty hydraulic guillotine shear for universal use for trade and industry. With the hydraulic table shear GLT from Prod-Masz you can make the perfect cut with every job. - The extending table makes it easier to carry large-sized metal sheets on the table - Support table with graduation Blsdpfjc I T E Tjx Agcjr - robust and compact steel construction - high quality, durable steel knives - extremely stable and heavy cast iron construction - Ground and hardened guillotine shear knives - Back gauge system with Scala - CE approved quality - Declaration of conformity - for steel plates up to 1.2mm - Open design suitable for endless cuts - Max. Working width: 3000 mm - Motor power 2.2 kW - HL 46 oil - pressure force 4t - Operating pressure 120-150 bar - has hydraulic compensators from the cutter bar upwards Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight about 1000 kg We are looking forward to your contact! We issue the invoices with 0% (intra-Community delivery)

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, Bjdpfsv Nwx Rox Agcjlr YOUR competent partner for SHEARS AND BENDING MACHINES We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 2000/1.2mm - Working length 2050mm - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Clearance: 8cm Shipping within Germany 360€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks Bjdpfsxabc Rsx Agcjlr

Condition: new, Year of construction: 2025, Heavy duty manual guillotine shear for trade and industry. With the manual guillotine shear GLT you can make the perfect cut with every job. the extending table makes it easier to guide large-sized metal sheets on the table Support table with graduation robust and compact steel construction high quality, durable steel knife extremely stable and heavy construction made of cast iron ground and hardened guillotine shears Back gauge system with Scala CE mark Declaration of conformity stable and robust construction for steel plates up to 1.2mm Working length 2050mm open design suitable for endless cuts large cast work table Lower storage compartment for storing sheet metal pieces in the price Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Bodpfecl D Hljx Agcslr Weight: approx. 500 kg Passage: 8cm Price: 4650 euros marking template free! Delivery date: every week Contact what's app We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, YOUR competent partner for BENDING MACHINES and SHEARS. We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Plate shears 1500/1.2mm - Working length 1500mm Bodpfx Astctl Tegcolr - Stable and robust construction for steel plates up to 1.25mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 2000mm Width: 750mm Height: 1150mm Weight: approx. 300 kg Clearance: 8cm Shipping within Germany 180€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1550mm and 3000mm on request Contact:

Condition: used, Year of construction: 1996, sheet width 2040 mm plate thickness 4.0 mm ST plate thickness 6.0 mm ALU thickness at "Niro-steel" 2.5 mm distance between columns 2100 mm no. of strokes ca. 32 Hub/min cutting angle 2.0 ° table height ca. 820 mm Control SCHRÖDER / ELGO total power requirement 5.5 kW Blodexaa Edspfx Agcjr weight 3250 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon request The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions

Condition: new, Year of construction: 2025, Up to 150km free delivery. ABKANTBANK-Technik Halver, YOUR competent partner in the matter of ABKANTBÄNKE We are your contact for high-quality sheet metal processing. As a distribution partner of the Polish manufacturer PROD-MASZ for many years, we respond to the needs of our customers on site and see ourselves as an extended arm of the production. Bjdpotctl Nsfx Agcolr Appropriate machines can be demonstrated if required, in addition to competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. guillotine shear 3000/1,0mm - Working length 3000mm - Stable and robust construction for steel plates up to 1.2mm - Large cast iron work table - Open design suitable for endless cuts - Backgauge with scale - Declaration of conformity - CE mark Dimensions: Length: 3500mm width: 750mm height: 1150mm Weight: approx.700kg passage: 8cm Shipping within Germany 390€ All prices are subject to 19% VAT. Self collection Cash payment on delivery Other dimension 1000mm to 3000mm on demand Contact us:

Condition: like new (used), overall weight: 11,500 kg, empty load weight: 11,500 kg, operation weight: 11,500 kg, Year of construction: 2012, verachtert vhs 70 weight: 11500 kg machine class: 120 to 500 tons (mounted quick change) Bjdpevm An Sjfx Agcjlr machine class: 60 to 90 tons (mounted stick) neat well-functioning shear cylinder completely overhauled equipped with new bushings everything completely tested always large stock of grippers and other attachments if your gripper is not among them, please contact us by mobile, email, whatsapp. price excluding VAT. trade-in/transport possible. we also have a workshop with various welding and turning equipment. we work with the following brands: #verachtert#lehnhoff#smp#eurosteel#GP#oilquick#steelwrist#engcon #beco#kinshoffer#hammer #knikmops#yanmar#kubota#wacker-neuson#houlotte#takeuchi#cat#boma g#atlas#sennebogen#hyundai#iseki#solis#avant#ihi#newholland #gehl#kramer#jcb#weidemann#schaffer#terex#schaeff#manitou#dieci# work ethic#jlg#caterpillar#fuchs#giant#ahlmann#hitachi#komatsu #doosan#kramer#liebherr#volvo#zettelmeyer#merlo#bobcat#snelwisse l#coupler#cw00#cw05#cw10#cw30#cw45#cw55#cw70#kniklader #mobielekraan#wielkraan#excavatorbucket#zijtveld#grabs#grabs#gre iffe r#dehaco#ACDE#vematec#hydraram#pladdet#J&B#overslaggrijper #clamshellbucket#umschlaggreifer#bennes de transbordement##earthmovingmachines #mining #loaders #excavators #frontshovel #surfaceminging #undergroundmining #miningmachinery #goldmine #coalmine #coppermine #ironoremine #diamondmine #mininglife #heavyequipment #miningequipment#recycling #recyclen #recyclage#Kinshofer#recycling#recyclen#recyclage#MultiQuickProz essoren #demolition#demolition #abbruch #démolition#demolition#demolition#abbruch#démolition#demolition #demolition #abbruch #démolition#Combimulti #recycling#recycling#recycling#polypgrab#orangepeelgrab#multiple chalengreifer#GrappinsMultiprises#orange#peel#grab#recycling #demolition#demolition#abbruch#démolition#polypgrab #orangepeelgrab #multiple chalengreifer #GrappinsMultiprises#recycling #recycling #pulverizer #Pulverizers #Pulverisierer #Croyeursfixes#Scrap shears#iron shears#scrapshear#ironshear# Scrap shearing #concrete pulverizer #concrete shear #concretecrusher #concreteshear #Crushers #betonschere #Pincesàbéton#pulverizer#Pulverizers #MultiQuickProcessors #MQP #Multishear #multishear #MultiQuickProzessoren #Combimulti#MultiQuickProcessors#MQP#Multischaar #Scrap shears #iron shears #scrapshear #ironshear #Scrottshearing #Combihydraulique#betonverpulizer#betonschaar #concreteshear#Crushers#betonschere#Pincesàbéton#Pulverisierer#B roye

Condition: used, Year of construction: 2010, working width: 2,500 mm, sheet thickness steel (max.): 15 mm, Equipment: foot remote control, Electric guillotine Schroder with mechanical back rest. Recently serviced. Knives in good condition. Guillotine fully functional, can be tested. Bjdpowq Dqhofx Agcolr Specification: Model: Schroder MHSU Year: 2010 Made in: Germany Working length: 2 500 mm Max cutting thickness: 1.5 mm Back rest: mechanical Weight: 1260 kg

Condition: good (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schröder and a folding machine from the top manufacturer RAS from Sindelfingen. Machine features: - Cuts (see nameplate) up to 2.5 mm steel Bledpfx Ajxqpiysgcsr - Working length: just over 2 meters - Back gauge: 500 mm - Side/angle gauge - Extendable front support - Foot pedal - Reversible blade - Weight approx. 1300 kg This machine comes from the insolvency of an aluminum parts manufacturer who primarily supplied the automotive industry — has been tested, cleaned, can be inspected and tested — warranty excluded. RAS Folding Bench: - Capacity: 2.5 mm steel, more for aluminum - Bending length: just over 2 m - Adjustable depth stop from the front, can also be used as an excellent sheet support - Hand and foot control - Machine comes from a reputable company and has been professionally checked before sale - Weight: see photo - Optional: a segmented rail (segment bar) from RAS is also in stock - Invoice with VAT shown separately - Shipping can be arranged upon request Free loading as shown in the pictures Inspection and testing are possible by telephone appointment — 0175 248 1975. Payment in cash upon collection — if there’s anything else I can do for you, please give me a call. Thank you. Collection should take place within 8 days after the end of the auction. Location: 97261 Güntersleben

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 3 mm, cutting length (max.): 1,020 mm, Mechanical guillotine shears Fab. SCHRÖDER Typ. MHSU 1020 x 3mm Year 2000 Technical data Bjdpfoulrx Tox Agcslr Make: SCHRÖDER Type: MHSU 1000 x 3mm Year of manufacture: 2000 Sheet width: 1000 mm Sheet thickness: 3 mm Space requirement: LWH approx. 1.40 x 1.50 x 1.30 m Weight: approx. 720 kg Equipment - Manual backgauge - Operating instructions - Cutting edge lighting - Continuous hold-down device with hard rubber strip - Machine feet All specifications without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: new, Year of construction: 2025, We have various kinds of ball grinding mill such as batch ball mill, rod mill, cement ball mill, mining ball mill, welcome to contact our team for further details according to your specific requirements. Bodeq I Nw Ispfx Agcjlr

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 Bljdetpnldopfx Agcer - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg