Used Planer And Moulder for sale (8,040)

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz Gksdpfx Ash U Nvkoftsf LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, number of spindles: 6, Four-side planer and moulder Manufactured by Weinig Type: Hydromat 23C Year of manufacture: 2005 Working width: 230 mm Working height: 120 mm 6 spindles Spindle arrangement: bottom/right/left/top/top/bottom Spindle motors: 7.5 kW each Automatic table lubrication Automatic Memory System control system Spindle diameter: 40 mm Spindles with bearings on both sides The last two heads are equipped with jointers Gkodpfex E Ak Aex Aftsf

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer Godpfx Afsulnr Aetskf 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: used, Year of construction: 2003, functionality: fully functional, Location: Navarra, Spain Gkedpfx Afox Hp R Estjf Worldwide shipping available! Trade sale via intermediary, contact us for more information! Control ERL 100, max. cutting width 260 mm, max. cutting height 180 mm, number of spindles 6. Spindle configuration: First bottom head / Fence side head / Near side head / Top head / Second bottom head / Universal head. Feed speed 6–36 m/min, spindle speed max/min 6000 rpm. Motorized cutting height adjustment. Infeed table length 1800 mm. Lower spindles 2, right spindles 2, left spindle 1, upper spindle 1, spindle diameter 40 mm, tools included.

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Gkodpfox E T Dmex Aftef

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, Planing size 220 x 150 mm, grooved bed, electric height and width adjustment Machine in operation, works. CHF 14500.— excl. VAT Gkedpfxju Sntzo Aftsf From site 4102 Frenkendorf Switzerland

Condition: used, Year of construction: 1990, Weinig Profimat 22N Year of manufacture: 1990 Number of spindles: 6 pcs Planing width: 220 mm Planing height: 120 mm Spindle diameter: 40 mm Infeed table length: 2,000 mm Drive: Cardan shaft Spindle arrangement: Bottom Right Left Top Bottom Universal Godpfxox Dbbns Aftskf

Condition: excellent (used), SCM Sintex four-sided planer. Gkjdpfxsx E R Hxs Aftof

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer Gsdpfx Asqvml Rjftokf 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Four-side planer/moulder – WEINIG QUATTROMAT 23P Year of manufacture: 1998 CE-compliant machine Working width: 13 to 230 mm Working height: 6 to 120 mm Number of spindles: 4, diameter 40 mm (equipped with cutters) Spindle speed: 6000 rpm Gksdpjx El E Nefx Aftjf Upper spindle motor power: 4 kW (5.5 hp) Lower spindle motor power: 4 kW (5.5 hp) Vertical spindle motor power: 5.5 kW (7.5 hp) Documentation: user manual + wiring diagram + spare parts manual + CE certificate Function tested (video available on request via WhatsApp) Transport dimensions: 4100x1400x1700h mm Weight: 1600 kg

Condition: used, Year of construction: 1994, functionality: unexamined, planing height: 120 mm, planing width: 230 mm, total height: 1,700 mm, total length: 4,600 mm, overall weight: 3,550 kg, Machine with 6 planing heads bottom 4 kW, right 4 kW, left 4 kW, top 5.5 kW, top 4 kW, bottom 4 kW Working width 25 - 230 mm Planing height 6 - 120 mm Feed speed 5 - 35 m/min Feed motor 4 kW Spindle speed 6000 rpm Gkjdpfx Ajv Dx Eueftsf Spindle diameter 40 mm Infeed table length 2000 mm Machine weight 3800 kg Dimensions (L x W x H) approx. 4550 x 1700 x 1700 mm

Condition: used, Profile spindles WEINIG 1 piece length 1100 mm Gsdpfxsq Tn Tus Aftokf 1 piece length 650 mm 2 pcs length 700 mm 2 pcs length 900 mm

Condition: used, Year of construction: 1981, Weinig U22N Number of spindles: 7 pcs Planing width: 220 mm Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Gkjdpfx Aox Da Rboftjf Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Top 5.5 kW Top 4 kW Bottom 4 kW

Condition: excellent (used), Weinig four-side planer Gksdox E Rzpopfx Aftef

Condition: good (used), functionality: fully functional, working width: 230 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 170 mm, power of feed motor: 5,500 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, planer shaft diameter: 40 mm, type of input current: three-phase, number of spindles: 9, power: 95 kW (129.16 HP), input frequency: 50 Hz, Equipment: cabin, Four-sided planer Weinig Unimat 23, lamella machine 9 spindles, grooved bed Working width: 230 mm, working height: 170 mm, spindle diameter: 40 mm, feed: 5.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (5.5 kW) 2-Right (5.5 kW) 3-Left (5.5 kW) 4-Right (5.5 kW) 5-Top (11 kW) Gsdpfx Afex Hkp Notskf 6-Bottom (5.5 kW) 7-Top (7.5 kW) 8-Bottom (37 kW) 9-Uni (11 kW) 5 driven rollers in the table

Condition: ready for operation (used), Year of construction: 2000, Casadei Matrix A (identical machine to SCM Compact O, R, L, U model) - 2-axis control for aggregate positioning - Four-sided planer and moulding machine - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. final cross-section of workpiece: 155 x 230 mm - Minimum workpiece length: 480 mm - Max. adjustable cutting depth: 10 mm - Spindle speed: 6,000 rpm MACHINE EQUIPMENT: - Robust, welded machine frame - Large, soundproofed hood with gas struts - Raised control panel on operator side - Steel infeed table 2,500 x 250 mm Table height: 880 mm Side-mounted, spring-loaded infeed conveyor Manual table lubrication behind jointer 1) Lower horizontal spindle 5.5 kW 2 & 3) Vertical spindles (right & left), each 7.5 kW 4) Upper horizontal spindle 7.5 kW FEED: - Feed speed, adjustable: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) ADDITIONAL FEATURES: - CE marking - Power supply: 380 V three-phase, 50 Hz - Lockable main switch, automatic star-delta start Emergency stop front and rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Spindle drive via cardan shafts Motor for height adjustment: 0.37 kW - Axial spindle adjustment: Lower horizontal spindle: 0 to 15 mm Upper horizontal spindle: 0 to 25 mm Vertical spindles: 0 to 25 mm - Permissible tool diameters: Lower horizontal spindle: Ø 120 to 140 mm Vertical spindles: Ø 100 to 180 mm Upper horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø 140 x 12 x 40 mm - Recommended compressed air supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G Operating manual and tools included Gksdpfxex Dx Acj Aftef Year of manufacture: 2000 Price: €9,500

Condition: ready for operation (used), Guilliet KXR III with mobile spindle for variable widths + Carpentry package final dimension 240x160mm + Infeed before planing + Reinforced motors Number of spindles: 4 pcs, 40mm diameter Maximum profiling tool diameter, left/right: 180mm Vertical spindle adjustment: 40mm Final width: 240 mm Final height: 160 mm Planer table length: 2500 mm Feed speed: continuously adjustable 4.5–27 m/min Reinforced motor power: Gsdpfx Asvq Rnhoftokf Planer: 7.5 kW Left/right spindle: 11 kW, 1 motor Thicknessing: 9 kW Feed: 2.2 kW Dimensions approx. (L/W/H): 3160 x 1420 x 1440 mm Machine weight approx. 1700 kg Available immediately from site, as currently installed Optional inspection and reconditioning available at extra cost

Condition: good (used), Four-sided planer WEINIG Gjdjupkc Espfx Aftekf type U17N 8 spindles Working width up to 170 mm Working height up to 120 mm feed infinitely variable 6-36 m/min

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Crosscut circular saw with 2 double shafts – vertical and horizontal configuration. Designed for sawing battens, strips, slats, and separation cuts with minimal kerf width. Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping bushings: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Gjdpfxjx Ap Dzj Aftokf Feed speed frequency-controlled from 0 to 40 m/min. 8 pairs of powered feed rollers. Pneumatically adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with operating system. Saw bushings and tools included. Sound-insulated cabin. The machine is in very well-maintained condition and was only used occasionally. There is no visible wear on the feed rollers. The unit has not been in operation for 12 years. Mechanization: - Infeed centering roller conveyor with adjustable feed gearbox. - Outfeed roller conveyor with integrated cross drag conveyor. - Both with adjustable feed gearbox. Mechanization system is from an older generation. - Electrical control cabinet with operating system. Gubisch Grimme Multi-blade Saw Cross-cut multi-rip saw Lamella multi-blade saw Cross-cut circular saw with two double shafts, vertical and horizontal execution. Suitable for cutting battens, strips, slats, and for separation cuts with a narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed frequency controlled 0 – 40 m/min. 8 driven roller pairs. Pneumatically adjustable roller pressure. Electric height and width adjustment. Electrical control cabinet with controls. Saw bushings and tools. Sound-proofed operator cabin. The machine is in excellent condition and was only sporadically used. No visible wear on the infeed rollers. Not in use for the past 12 years. Mechanization: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated transverse discharge conveyor. Both with adjustable feed gearbox. Mechanization is of an older type. Electrical cabinet with control system.

Condition: excellent (used), Weinig Four-Side Planer - Maximum planing width: 23 cm Gkodpfjx E Rxuox Aftjf - Maximum planing height: 13 cm - Spindle configuration: 5.5 kW bottom spindle, 7.5 kW right and left spindle, and 7.5 kW top spindle - Vertical spindles with vertical and horizontal adjustment - Electrically height-adjustable feed rollers - Electrically height-adjustable top spindle - Steplessly adjustable feed speed - Weinig head alignment device The machine is in very good condition and runs vibration-free.

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 260 mm, working height: 160 mm, power of feed motor: 4,000 W, spindle speed (max.): 7,000 rpm, spindle speed (min.): 7,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 5, power: 39 kW (53.03 HP), Equipment: cabin, motor brake, Weinig Unimat 1000 with grooved table Working width: 260 mm Working height: 160 mm 5 spindles Spindle diameter: 50 mm Spindle arrangement: Gkodpfxox Dzc So Aftef 1-Bottom (7.5 kW) 7000 rpm 2-Right (7.5 kW) 7000 rpm 3-Left (7.5 kW) 7000 rpm 4-Top (7.5 kW) 7000 rpm 5-Bottom (5.5 kW) 7000 rpm Feed: 4 kW / 6–36 m/min One driven roller in the table at the outfeed.

Condition: excellent (used), Weinig Four-Sided Planer - Maximum planing width: 23 cm - Maximum planing height: 13 cm - Spindle configuration: bottom 5.5 kW, right and left spindles driven by a 5.5 kW motor, top spindles powered by 5.5 kW Godjx E Rtxjpfx Aftekf - Electrically height-adjustable feed rollers - Infinitely variable feed speed - 4 steel planing knives, each with 4 blades The machine is in very good condition and runs smoothly without vibrations.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, working width: 230 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 230 mm, working height: 120 mm, power of feed motor: 37,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 3,000 rpm, height adjustment type: electric, planer shaft diameter: 50 mm, type of input current: three-phase, number of spindles: 10, power: 574 kW (780.42 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, rotational speed infinitely variable, Weinig Powermat 2500 Gkodpjxz Thbsfx Aftsf 10 Spindles, Working width: 230 mm, Working height: 120 mm, Spindle diameter: 50 mm, Feed: 37 kW / 12–120 m/min, Spindle configuration: 1- Bottom (22 kW) – with hydraulic clamping and fully automatic straight jointer 2- Right (11 kW) 3- Left (11 kW) 4- Top (37 kW) – with fully automatic straight jointer 5- Bottom (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 6- Top (18.5 kW) – with hydraulic clamping and fully automatic straight jointer 7- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 8- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 9- Top (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm 10- Bottom (53 kW) – with hydraulic clamping, speed 3,000–6,000 rpm Short infeed table, 1.3 meters (4 rollers), with 2 powered rollers above the table and 2 powered rollers in the table (both table rollers can be lifted). Table height adjustment with electronic digital readout. Incl. 2 heavy-duty side pressure rollers, 140 mm diameter, pneumatically actuated. Base supports, height 320 mm, for a table height of 1190 mm. Marathon POWER Coating for machine table, fences, and guide rails (excluding infeed table and special table surfaces). Special coating to protect table plates, fences, and guide rails from excessive wear. Recommended for processing abrasive materials (e.g., tropical woods, MDF, chipboard, plastics, metals). Automatic lubricant pump for table resin removal. Powered rollers in the machine table, hardened. Heavy-duty steel pressure rollers from above, diameter 120 mm, located in the area of the right and left spindle.

Condition: excellent (used), Leadermac LMC 525 Four-Sided Wet Planer - Maximum planing width: 25 cm - Maximum planing height: 20 cm - Bottom spindle: 5.5 kW - Right spindle: 5.5 kW - Left spindle: 5.5 kW - Top spindle: 7.5 kW Gkjdpfex E Rh Asx Aftsf - Universal spindle: 7.5 kW - 3 feed rollers in the table + lubrication pump - Hardened chrome tables - Stepless feed speed adjustment In excellent condition. Original. Nothing repainted.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Gedpfx Aoxqh E Heftekf Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.