Used Planer Blade Sharpening for sale (6,865)

Condition: used, Year of construction: 1992, Guilliet C four-sided milling machine, year of manufacture 1992, in good condition, including 3 milling heads (1 x 135 x 100 mm, 2 x 180 x 100 mm), including reversible cutting inserts. Bdsdpfx Agszq Db Dodsf

Condition: excellent (used), CATALOGUE NUMBER 7990 TECHNICAL DATA - roller width 630mm - max. thickness of workpiece 200mm – top: - pawls - toothed infeed roller, pulling - pressure rollers - planing roller - pressure rollers - smooth outfeed roller, pulling – bottom: - adjustable rollers in the lower bed, 2 pcs - motor approx. 5.5kW Bedpfjzp N Tcex Agdjdf - 2 feed speed types - feed motor 0.55kW - dimensions L/W/H 1200x130x1100mm - weight 1093kg ADVANTAGES – German production – used thickness planer, very good condition Net price: 9500 PLN Net price: 2265 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7823 Technical specifications: - Roller width: 640mm - Number of knives: 4 pcs - Maximum thickness of workpiece: 250mm – Top: - Deflectors - Toothed, infeed roller - Pressure rollers - Planing roller - Smooth, outfeed roller – Bottom: - Adjustable rollers in the lower bed – 2 pcs - Motor: 7.5kW - with brake - Electric bed lifting - 4 feed speeds: 8/11.3/16/22.4 m/min - Feed motor: 1.35kW Bdedpfx Aezp N Ndegdef - Dimensions (L/W/H): 1400x1200x1210mm – weight: 1041kg ADVANTAGES – Made in Poland – Electric bed lifting – Used thickness planer, very good condition Net price: 16900 PLN Net price: 4025 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on the thicknesser 250mm - max. thickness of workpiece on the side heads (3-sided) 110mm – from above: - ejectors - toothed infeed shaft - pressure pad - planing shaft - pressure pad - smooth outfeed shaft - pressure pad at the output – from below: - guide strip - adjustable rollers in the lower bed, 2 pcs – from the rear: - side spindles + pressure pad, 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed settings - electric bed lifting - dust extraction port 2x110mm - overall dimensions (L/W/H) 1650x1500x1210mm - weight 1370kg ADVANTAGES – Polish production – shaft for 4 knives Bsdezp Nzajpfx Agdedf – used planer, very good condition Net price: 23,900 PLN Net price: 5,690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: as good as new (ex-display), Code: 0466 Bdodpfxezqd D Ej Agdsf Brand: FELDER - AUSTRIA Model: D 963 - CE Standard Automatic thickness planer with Silent Power low-noise spindle and Digi Drive positioning system - CE Standard Working width 630 mm Working height 3–300 mm Max chip removal 8 mm Variable feed speed from 4 to 16 mt/min Planer spindle with Silent Power spiral cutters with reversible HM blades Digi Drive automatic positioning system

Condition: as good as new (ex-display), Code: 0465 Brand: FELDER - AUSTRIA Model: D 951 - CE Standard Automatic thickness planer – CE Standard Technical data: Shaft with 4 Tersa replaceable blades Diameter 120 mm Working width 504 mm Working height 3/254 mm Table length 900 mm Max chip removal 8 mm Automatic table lift Electronic depth display Variable feed speed from 4 to 16 metres/min N° 2 rollers on the table Bdsdpfxjzqdz Ro Agdef Motor power Hp 10YT Dust extraction connection diameter 140 mm Overall dimensions mm 1050 x 1050 x 1100 h Weight kg 650

Condition: excellent (used), Year of construction: 1993, Vollmer CBF 40 H surface grinding machine. Bdedpjzn Hawofx Agdjf

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure Bdodeu Agh Sepfx Agdjf 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: like new (used), Demonstration machine The CTR1000H80 band saw with an 80 mm saw blade for even cleaner cuts and higher yield. Extra strong, solid, and durable sawing unit for log diameters up to 1000 mm. Soft starter included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. CE certified. Advantages and features: Bdodozqrm Iopfx Agdef - Saw head suspended on both sides for greater stability and better precision. - 8.4-inch touchscreen LCD for quick and precise height adjustment. - With telescopic lever log turner and log lifter for easy log manipulation. - Log lifter with drive for horizontal log feed. - 5 swiveling hydraulic angle stops. 2 log clamping tools. - Hydraulic saw blade tension for quick adjustment. - Electrically adjustable saw blade guide and automatic coolant pump for high operator comfort. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 375 mm Cutting length of the base section: 7.5 m Length of the extension section: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Stroke motor: 0.55 kW Motor of the hydraulic unit: 5.5 kW

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes Bodovwgm Hopfx Agdodf closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° Bdedpfxovwglvj Agdsf column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Bdedpfx Aevwgmgogdof Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: excellent (used), Year of construction: 2001, x-travel 2200 mm y-travel 3200 mm z-travel 1250 mm Control FIDIA C20 c-axis +/- 200 ° milling-head swivable +/- +90 ° milling-head swivable +/- -100 ° feeds X-axis 50 m/min feeds Y-axis 50 m/min feeds Z-axis 50 m/min tool taper HSK A63 tool change unit 16 Pos. spindle turning speed range 18000 U/min distance between columns 4060 mm dist. milling spindle - table surface 1796 mm connected load 238 kVA weight of the machine ca. 45 t dimensions of the machine ca. 9 x 7 x 5 m This JOBS LinX6 is in very good condition and can be viewed under power by arrangement with the seller. Description: Jobs LinX6 Type: 5-axis milling machine with movable gantry and fixed table Control: FIDIA C20 Year of manufacture: 2001 Travel X: 2200 mm Y travel: 3200 mm Z travel: 1250 mm A-axis travel: +90° / -100° C-axis travel: +200° / -200° Max. feed rate in X/Y/Z: 50 m/min Table clamping surface: 4000 x 2500 mm Clearance between columns: 4060 mm Clearance height between table and portal: 1807 mm Clearance height between table and spindle nose: 1796 mm Milling head: T2K D.01.06 Tool holder: HSK A63 Tool changer: 16-fold Spindle power: S1 from 6800 rpm 40KW Spindle speed: 250 - 18000 rpm Total connected load: 238 kVA Special equipment: - Siemens linear motors in all axes - JIMS / preparation for semi-automatic motor spindle change - Replacement spindle as spare part - External coolant supply / 1000L tank - Minimum quantity coolant dosing - Scraper conveyor Bjdexa Hl Repfx Agdedf - Renishaw TS27 tool measuring system - Ethernet connection - Manual control module Other: Complete documentation available Machine weight: approx. 45 tonnes Space requirements: 8.7 m (width) x 6.7 m (depth) x 5.1 m (height)

Condition: excellent (used), Year of construction: 2014, x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed - stepless 22000 U/min c-axis +-300° milling-head swivable +/- +-110° tool taper HSK 63 A tool change unit 50 Pos. total power requirement 130 kW weight of the machine ca. 53,5 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is available immediately and in good condition. - NEW spindle received 6 months ago Description: Technical specifications of the machine and working ranges X-axis 2500 mm Y-axis 3000 mm Z-axis 1250 mm A-axis ± 110 ° C-axis ± 300 ° Includes vibration sensor Includes bearing temperature sensor Includes rotary joint for internal tool magazine feed (IKZ) 5-axis path control: Heidenhain iTNC 530/handwheel HR520, 15” TFT colour display Extraction system LTA Industrial Air Cleaning Machine room canopy 50-position tool changer, chain magazine, behind the machine Chip conveyor, ejection 60° to the left, front-facing No probe available!!! Blum Laser tool measurement ‘Control NT-Micro’ Clamping table Length x width x height 2500 x 3250 x 400 mm Bjdpfszak Hgex Agdsdf Table load 8000 kg/m² (max. 16000 kg) T-slots, arranged longitudinally 18H12 T-slot spacing 250 mm Dimensions, weights Footprint (excluding peripheral equipment) approx. 7600 x 7300 x 5650 mm Total weight approx. 53500 kg Electrical connection data Voltage (three-phase) 400 V Frequency 50 Hz Compressed air connection (to be provided by customer) Required air pressure 6 bar Average air consumption approx. 15 m³/h (depending on machine configuration) Linear axis drives Feed rate X, Y, Z axes 60 m/min Axis acceleration X, Y, Z axes up to 5 m/s² Rotary axis drives – VH30 Feed rate A- and C-axis 360 °/s Axis acceleration A- and C-axis 700 °/s² Resolution A- and C-axis 0.0001 Accuracies of linear axes – in accordance with VDI / DGQ 3441 Positioning accuracy X-axis P= 0.026 mm Y-axis P= 0.028 mm Z-axis P= 0.020 mm Repeatability X-axis Ps= 0.015 mm Y-axis Ps= 0.016 mm Z-axis Ps= 0.010 mm Resolution of measuring systems (interpol) A-, C-axis 0.0001° Accuracy of rotary axes – VH30 Positioning accuracy A- and C-axis P= 12" = 0.0033° Repeatability A- and C-axis Ps= 8" = 0.0022° VH30 milling head 2-axis milling head: VH30, Siemens Weiss milling spindle Spindle power S1 (100% duty cycle) 60 kW, Spindle speed 22,000 rpm, 95 Nm, HSK-A63 External dimensions of fork head L x W approx. 500 x 600 mm Nominal torque of rotary axes Control loop A: min. 1,200 Nm C: min. 1,047 Nm Clamped A and C axes: 3,000 Nm (Continuous grease lubrication with automatic relubrication system) Swivel axis – spindle nose 326 mm Tool holder HSK 63 A Tool clamping Spring clamp Tool unclamping Hydraulic Permissible tool weight 4.5 kg (manufacturer’s specification) Coolant supply External and internal Coolant/lubricant supply (emulsion) at the front of the milling spindle with belt filter system Volume 1500 l Pump 1: 40 l/min at 20 bar Pump 2: 20 l/min at 40 bar, Air blow at the front of the milling spindle

Condition: new, Year of construction: 2026, Yanigav Pointing Machine AP280 / AP280G / AP280E Pro Bjdpfx Agor Ezftsdodf • Weight: 300kg / 360kg / 460kg • Drive: Hydraulic pump / Hub-driven PTO / Three-phase electric motor 7.5kW • Max. opening: 270mm • 5 adjustable grinding angles Price: 7500€ / 9500€ / 12600€

Condition: new, Year of construction: 2026, Yanigav AP350 Sharpener • Weight: 750 kg • Drive: Hub drive PTO • Maximum opening: 350 mm Bdjdpsr Ezfdefx Agdef • Cylinder stroke: 750 mm • 4 adjustable sharpening angles • Blade holder with polyamide bushings • Pedal-operated for left- and right-handed use

Condition: excellent (used), Year of construction: 1989, Panhans Surfacing and Thickness Planer Type: 326, Year of Manufacture: 1989 Planing width: 630 mm Infeed table: 1600 mm Outfeed table: 1150 mm Total table length: 2800 mm Drive motor (three-phase): 5.5 kW Cutterhead speed: 5000 rpm Bdjdpfxeznnime Agdjf Footprint: 2800 x 1000 mm Weight: net 1400 kg Lever-operated adjustment for surfacing 4 cutterheads, reversible knives Accessories: Suvamatic Excellent condition Location: in stock, 54634 Bitburg - available immediately - Subject to prior sale.

Condition: used, AD Planer-Jointer Hans Schreiner ML393Q, good condition G-ADHM118210P Technical data: Motor output 2.8 kW (2.2 kW S1) Jointer knives 3 Arbor diameter 75 mm Jointer width 310 mm Infeed table length 1285 mm Maximum workpiece height 180 mm Bdedpfxjzqa Uae Agdsf Feed rate 6 m/min Thickness table 310 x 600 mm Voltage 400 V Weight approx. 179 kg

Condition: used, functionality: fully functional, Raimann ProfiRip KM310M multi-blade saw Mobile saw, 1 unit Track width 330mm Maximum blade spacing 310mm Maximum material feed width 800mm Cutting height with pressure plate 100mm Cutting height without pressure plate 115mm Blade size 280-360mm Quickfix system Bedpezqzunofx Agdsdf Feed rate adjustable via inverter up to 35m/min Main motor power 37kW Year of manufacture 2006

Condition: excellent (used), Year of construction: 2004, working width: 300 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 300 mm, working height: 1,000 mm, total width: 2,800 mm, total height: 2,400 mm, total length: 3,800 mm, overall weight: 13,000 kg, power of feed motor: 24,000 W, spindle speed (min.): 5,500 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 5,500 rpm, height adjustment type: electric, planer shaft diameter: 205 mm, workpiece height (max.): 120 mm, workpiece width (max.): 330 mm, input voltage: 400 V, tool diameter: 205 mm, number of spindles: 5, power: 154 kW (209.38 HP), table width: 330 mm, 4-Sided Lamella Planer 300 x 120 mm Adjustable feed speed from 30 to 150 m/min. Equipment: 2 upper and lower horizontal cutterheads Z 10; 2 right and left horizontal cutterheads, Z 10, equipped with jointers. - Horizontal shaft rotation speed: 5,500 rpm - Vertical spindle rotation speed: 6,000 rpm - Vertical spindle shaft diameter: 50 mm - Vertical spindle clamping length: max. 185 mm Tool diameters: - Horizontal shafts: 205 mm - Vertical spindle head tools: 160 - 205 mm Cutter blocks: - Thicknessing and surfacing shafts with cutter blocks: - 2 x Planer head 205 x 330 mm, Z=10, screw clamping - Lamella planer knives: 3 x 35 x 330 - 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping Bdodpfxowz Nzmo Agdjf - Lamella planer knives: 3 x 35 x 130 - Weight: approx. 13,000 kg - Machine dimensions L x W x H: approx. 3,800 x 2,800 x 2,400 mm - Installed power: 154 kW Additional Aggregates Lower Scoring Saw Unit This unit is used for milling balance scores on the lower edge of worked lamellas with a width over 200 mm. The saw blade is mounted directly onto a flat motor using a flange. Horizontal movement is pneumatic with a saw stroke of approx. 150 mm (movement within the gap between boards; activated by a mobile spot sensor). The scoring zone is set manually, and the travel distance is displayed on a counter. Vertical movement uses a pneumatic cylinder with a saw stroke of approx. 30 mm (to allow quick switching between lamellas with/without balancing slots during processing). The end stop for scoring depth is set manually, and travel is displayed on a counter. Lamellas must be fed into the machine individually, one by one (not in continuous push feed). Technical Data: - Scoring saw motor: 15 kW - Saw rotation speed: 5,000 rpm - Shaft diameter: 40 mm - Max. cutting depth: 50 mm - Tool diameter: 300 x 4 mm - Extraction hood support diameters: 120 mm - Additional feed rollers: one above (diameter 240 mm), one below (240 mm, toothed and hard-chromed). The scoring saw is delivered with a blade. - Scoring saw working area: 37.5 to 225 mm Powered Lateral Infeed Roller Pneumatically suspended. Motorized width adjustment via push-buttons (if the positioning command is set to position adjustment (option), the lateral pressure roller can be adjusted from the control panel). The set width is shown on a SIKO counter. - Roller diameter: 190 mm - Roller width: 40 mm Automatic Knife Jointing Device The knife jointing device is fixed-mounted and manually operated.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, overall weight: 10,200 kg, positioning accuracy: 0.1 mm, type of input current: three-phase, total height: 2,300 mm, total length: 6,000 mm, total width: 2,000 mm, cutting width (max.): 450 mm, machine base height: 850 mm, working height: 850 mm, Double blade guillotine, electric movement of the movable blade via ball screw, lower rear movable blade, electric rear stop, 2 lasers, 10° cutting angle for improved cutting quality and better veneer penetration, weight: 10,200 kg, new PLC. Bedowy Irbepfx Agdedf

Condition: used, functionality: fully functional, SCM Mini Max FS410 Jointer-Planer Jointer: Working width: 410 mm Total length of tables: 2000 mm Length of infeed table: 1000 mm Cutterhead speed: 5300 rpm Number of knives: 4 HSS knives Maximum cutting depth: 5 mm Fence tilt range: 90°–45° Planer: Table dimensions: 700 × 410 mm Minimum / maximum working height: 3–230 mm Maximum cutting depth: 5 mm Feed rate: 8 m/min Dust extraction port diameter: 120 mm Motor power: 4 kW Total weight: 435 kg Bodpfxozqdwfs Agdedf Overall dimensions (W × L): 770 × 2000 mm

Condition: like new (used), Year of construction: 2010, planing height: 200 mm, Weinig Powermat 2000 XL four-sided planer: - German manufacture - DTR CE - automatically controlled - PowerLock heads - year of production 2010 - for wet wood TECHNICAL PARAMETERS: Bodpfxoun Nate Agdodf - planer width: 300 mm - planing height: 200 mm - PowerLock heads - control from the touch panel - electronically adjustable heads - pneumatically pressed heads 1 bottom head: 18.5 kW 2 right head: 15 kW 3 left head: 15 kW 4 top head 22 kW with side cutter: 1.5 kW 5 Overhead: 18.5 kW 6 Lower head: 20 kW - heads with automatic jointing system - spindles speed: 8000 rpm - inverter-controlled feed speed: 6 - 60 m/min - six steel drawing top rollers - three rubber trailing top rollers - top feed rollers with support - six rollers in the drawing table, of which 2 milled in front of the first head - automatic central lubrication - spigot diameter: 4 x 160 and 2 x 140 mm

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) Bsdpfxjibq Nij Agdodf 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), Year of construction: 2011, Four Side Planer SCM Compact NTE - after the technical review - Italian production - year of production 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 lower spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 lower spindle 5.5 kW six top pull rollers pneumatic pressure adjustable feed on the inverter feed speed range 5-25 m / min Bodpfxegyflce Agdjdf adjustable heads table top length 2480 mm electric brakes nozzles diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (length / width / height) 340/160/170 cm weight 2480 kg