Used Plasma Power Sources for sale (41,177)

Condition: excellent (used), Knürr-Heinzinger Type: PHN 1200-4 Power supply Power supply unit Power Supply 1200 Volt Hodpjrhiq Isfx Ad Denw 4 Ampere Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2017, condition: used, engine 12 Zylinder cubic capacity 57200 ccm total power requirement 3.438 kW Electric capacity 1.516 kw thermal performance 1.425 kW Number of working hours ca. 34.683 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Hsdpjxwzhbsfx Ad Djnw The combined heat and power unit is sold professionally dismantled and free on truck. Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as subject to prior sale.

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Equipment and technical specifications: - Suction connector: 200 mm Hodpsxwz Rijfx Ad Donw - Rated volumetric flow: 2261 m³/h - Vacuum: 2174 Pa - Motor power: 2.9 kW - Rated speed: 2910 rpm - Compressed air connection: max. 8.5 bar - Filter: Category M Weight: 470 kg Availability: approx. mid/end of January 2026 Location: Hesse

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: LinMot, Switching Power Supply 72V/1000W -Type: S01-72/1000 Hnjdpjxvrwdjfx Ad Dow -Mains voltage range: Ue. AC 3 x 340-550V / 50/60Hz. -Dimensions: 270/65/H195 mm -Weight: 2.1 kg

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Hnjdpfjxwmb Tex Ad Djw Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: ready for operation (used), Year of construction: 2008, operating hours: 22,560 h, General Data Measurements width 540 Measurements depth 960 mm Measurements height 1050 mm Machine weight 196 kg Table Outer length 4500 mm Outer width 2000 mm Hnedpfx Asxwfm Ijd Dsw This plasma cutting machine was manufactured in 2008. It features a CNC control MSNC500P Windows and a plasma source with a cutting range of 0.5 to 25/30mm, adjustable from 10 to 160 A for cutting. The flame cutting table measures 4500x2000mm, suitable for both plasma and oxyfuel cutting. It operates efficiently within a temperature range of +5 to +45 °C. Consider the opportunity to buy this MicroStep SPL-P 4501.25 plasma cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: used, No. 10029 Power generator Caterpillar Olympian GEPX150 Used According to our customer, the machine is fully functional and can be inspected and tested on site Power 150 kVA Engine Perkins Generator Leroy Somer LL 3014F Transport dimensions approx. 3600 x 1200 x 2000 mm LWH Weight approx. 2100 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Hjdpfxoxwdrcj Ad Dsnw Dismantling, transport and loading by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC Hnodpfx Adsxw A Icj Dsw :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: good (used), functionality: fully functional, overall weight: 5,000 kg, total width: 4,000 mm, total height: 3,000 mm, total length: 4,000 mm, including KAPPA extraction system Type: MYKRON M 16 Hnodpfxexwnd Ao Ad Dsw Serial number: 00M16.0055 Motor power: 15 kW Speed: 3000 rpm Year of manufacture: 2000 Control type: NBS 300 Production number: 1513 Voltage: 230 V Frequency: 50 Hz Connection rating: 330 VA FCA D-04895 Falkenberg, loaded onto truck

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module Hjdpoxvpm Asfx Ad Dsnw -Manufacturer: Teslaman, DC High Voltage Power Supply TD2202 Series -Type: TD2202P100-2000 -Voltage: 220 V -Power: 0 - 100 kV -Dimensions: 520/480/H140 mm -Weight: 22.4 kg

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting Hsdpfxeif Az Ue Ad Denw 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: good (used), Vollmer GPA 10 U the stellitieren in the plasma welding machine Equipped for band saw blades Help feed Hnodpfxsd Ernwo Ad Djw with heavy support brackets

Condition: ready for operation (used), Year of construction: 2017, General Data Machine weight 9000 kg Measurements height 2300 mm Measurements depth 4300 mm Movement X-Axis Movement 3000 mm Y-Axis Movement 1200 mm Main Drive Hnodpfx Adoxv Ezpe Dsw Number of axis 3 Dimensions Machine Length 15000 mm This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information. Application Types Cutting

Condition: used, Year of construction: 2020, controller manufacturer: Sonstige, controller model: Global ControlS, _____ Description: Year of manuf. : 2020 technical data Working area:3000 mm x 6000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling Hnjdpfx Ajxv Nk Usd Dsw :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m3/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-SmartLifter 200 :-SensoMat ARKI :-Full gas addressing :-Light barriers :-Wheel housing safety device (foot switch)

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm Hnedpfsxu U Ddox Ad Dew 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional extraction 6,000 x 3,000 mm 'Plasma Rotator MasterCut' with fully automated support ACTG automatic calibration unit for the beveling system Kemper Extraction System 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical specifications: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical sensing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover for cutting table Reinforced design of cutting table Interface for fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on the gantry bridge with emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 71125

Condition: good (used), Power converter, power supply, power supply unit, switching power supply, power supply device, switching power supply unit Hsdpfsxt Hblsx Ad Denw -Manufacturer: Murr Elektronik, Switch Mode Power supply -Type: Eco-Rail-2 5-100-240/24 -Technical data: see photo of the nameplate -Number: 3x switching power supply units available - Price: per piece -Dimensions: 135/50/H130 mm -Weight: 0.7 kg/pc.

Condition: ready for operation (used), Indramat TVM 2.1-50-220/300-W1-220/380 AC. Servo Power Supply, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Hnsdpfoi Ebrgex Ad Dsw

Condition: used, Year of construction: 2021, cutting range for steel to 50 mm capacity at 100% 130 A weight of the machine ca. 130 kg dimensions of the machine ca. 650 x 400 x 900 mm Hodpfev Da Udox Ad Dsnw ORIGINAL PRICE: ~6,000 EURO Very good condition Very little use Features: - Burner A151/6 - Ground cable 25 mm² Adjustment range, continuously variable [A] 25 - 150 Duty cycle at Imax. (10 min) at 20°C [%] 60 Mains connection [V] 3 x 400 V Fuse protection (slow-blow) [A] 35 Protection class IP 23 Cutting capacity max. [kw] 21 Current/voltage at 100% IDl [A/V] 130/130 Power consumption max. 24.5 Power factor [cos phi] 0.97 Max. cutting quality with REHM power torch 40 mm Max. cutting capacity for manual cutting with S 235/S355 [mm] 50

Condition: ready for operation (used), Year of construction: 2018, operating hours: 3,361 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Spindle speed range 8000 Spindle motor power 28 kW Number of axis 3 Movement X-Axis Movement 1270 mm Y-Axis Movement 610 mm Z-Axis Movement 720 mm Hjdpfsxu Rybsx Ad Donw Table Table load 1200 kg Tools Max weight 15 kg Additional Equipment 4 hydraulic vices from Röhm and various SK50 tool holders This 3-axis MAS MCV 1270 Power was manufactured in 2018. It features a Heidenhain TNC 530 control, SK50 spindle holder, and a tool magazine with 24 places. The machine offers a table size of 1500mm x 670mm, supporting a maximum load of 1200kg. Rapid traverse reaches up to 40m/min, with a maximum spindle speed of 8000 rpm. If you are looking to get high-quality milling capabilities consider the MAS MCV 1270 Power machine we have for sale. Contact us for more information. Application Types Milling

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Schweißring Plasmacut 65P 30-60 AMP 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. Hsdpoxr U Rlofx Ad Djnw A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Model: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Track length: 11 m Burning table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatically rotating plasma bevel unit Bevel System 2015/350 Hjdpsw Rpvbofx Ad Denw 1 oxy-fuel torch Filter system Downflow 3DFP9-SP Power: 9 kW Laser diode 31125ä

Condition: good (used), Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Hodpfjxt E Svsx Ad Denw Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS-2G/1AC/24DC/20 .: 2903151 -Input: AC 100-240V / DC 110-250V -Output: 24 V -Dimensions: 165/70/H130 mm -Weight: 1.3 kg

Condition: used, This listing is for the Thermo Fisher Invitrogen E-Gel TM Power Snap Electrophoresis Device The unit is in full working condition and is ready for immediate use Hnedpfx Adjxv Az Te Dsw The E-Gel™ Power Snap Electrophoresis Device is a compact, all-in-one benchtop system that streamlines both DNA separation and gel visualization. Designed for fast, safe, and convenient electrophoresis, this system integrates the power supply, blue-light transilluminator, and amber filter in one unit—making it ideal for a wide range of DNA analysis workflows Key Features Streamlined Electrophoresis & Imaging: All-in-one system integrates gel running and image capture. Fast Separation: Run DNA samples in as little as 10 minutes using dry, precast E-Gel™ agarose gels. Real-Time Visualization: View and capture DNA samples as they separate with integrated blue-light and amber filter technology. Instant Image Capture: The docked E-Gel™ Power Snap Camera allows high-resolution gel imaging without the need for external power or desktop connections. Benchtop Friendly: Small, fast, and powerful with a compact footprint for efficient and convenient use. Pre-Programmed Protocols: Built-in methods for all compatible E-Gel™ agarose gel types for a plug-and-play experience. Safe and Simple: Blue-light imaging avoids the hazards of UV light.

Condition: excellent (used), Year of construction: 2021, Very recent Durma plasma Type PL 30120 Capacity 3000 x 12000 mm Source Hypertherm XPR300 CNC bevel cutting head +/- 45 degrees Including rotary axis for cutting pipes ø50 to ø400mm Hodpfx Aexruc Usd Denw Complete with Donaldson extraction system

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 Hsdpfx Aexrz Hmod Djnw - Documentation available: Yes - CE marking present: Yes - Serial number: 289.112 - Control type: Beckhoff - Travel X: 3000mm - Travel Y: 1500mm - Resonator type: Hypertherm Powermax 105 - Max. sheet thickness: 32mm - Power: 16.8kW - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum