Used Plum Stoner for sale (121)

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm Ihodpev Htitjfx Ahyst z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2005, x-travel 400 mm y-travel 450 mm z-travel 350 mm Ihodpfx Ajxfb E Aohyjt Control Heidenhein iTNC 530 68 fach tool adaptor HSK 40E turning speeds 30.000 U/min fixed table - dimensions 300 x 400 mm mm workpiece weight 200 kg pallet table size 320 x 320 mm feed speeds autom. x/y/z 40 m/min. spindle drive motor 13 kW Number of working hours 32369 h total power requirement 16 kW weight of the machine ca. 7.500 kg High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic power unit for tool and pallet clamping, and digital drives with liquid-cooled Siemens AC servo motors. Accessories: 1 BURN refrigeration unit, 1 Keller L-Cut extraction system (built in 2012), PS 32 setup button, and tool blow-off device. Machine dealer with own stock of 1600 m².

Condition: used, Approx. 7 m double-walled chimney / flue made of stainless steel with floor console (insulated with approx. 25 mm mineral wool) incl. all clamping straps and hood. The system was only in operation for approx. 1.5 years. Diameter (inside): approx. 400 mm, Iodjru Hn Rjpfx Ahyeht Diameter (outside): approx. 470 mm, Length (: approx. 7 m, Insulation: 25 mm mineral wool

Condition: ready for operation (used), Year of construction: 1984, sheet width 3040 mm plate thickness 4 mm Iodpfsxwzbbex Ahyeht distance between columns 3040 mm stroke of upper beam 200 mm adjustment of lower and bend clamping 100 mm total power requirement 6,4/3 kW weight of the machine ca. 6,3 t dimensions of the machine ca. 4,3 x 1,2 x 1,8 m Motorized folding machine with double-sided bending beam drive, lower, upper and bending beam adjustable, drive motors as brake motors - slip clutches as overload protection, bending angle adjustment via potentiometer, individual switching for each work step by hand switch, SEGMENTED TOP RAIL 120 mm height (Photo 7).Please notice that such a machine now costs about €70.000,--. As usual, the sheet thickness is based on a strength of 40 kg / mm². Machine dealer with own stock of 2500 m².

Condition: used, Year of construction: 2014, working width 250 mm working length 250 mm work height max. 280 mm laser capacity in Watt 400 Rofin travel -z axis 10 - 1000 mm/s positioning accuracy +/- 0,1 mm repeating accuracy +/- 3,5 my capacity 6,8 kVA Ihsdpfxowdiwyj Ahyet Required air-pressure 6-10 bar Type of gas Schutzgas Stickstoff 5 bar dimensions of the machine ca. 5,9 x 4,2 x 3 m range L-W-H 2,44 x 1,63 x 2,36 m weight 2 300 kg Little used Concept Laser M2 Cusing system for processing reactive and non- reactive powder materials. Design of process chamber, handling station, powder suction according to ATEX Directive II for flammable substances. Materials: steel, stainless steel + aluminum. Supplementing titanium against additional payment possible. Dynamic coating system with 3 different wiper blades. Peripherals and accessories: Rofin laser source - photo 4 Nitrogen generator (in the other room, photo 7) External filter including fan and operating hours counter: 10464 - Photo 8. Storage container for the filter inserts. Transport device with lift for powder loading - photo 9. 6 stainless steel powder charging containers. Pneum. Vibrating sieve for attachment to the powder container. Powder container rack for swap containers, dimensions 1.15 x 0.17 x 1.22 m - photo 10. Orange wet vacuum cleaner - photo 8. Selling due to production change. Price at the time € 1/2 mio! Vid 1: Machine outside, Vid 2: Machining - created on this machine, Vid 3: Slide show Workpiece creation on this machine + accessories. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2011, table length 3050 mm table width 1525 mm burner heads 1 Control Mazatrol Preview M Number of working hours 31400 h laser capacity in Watt 4000 max. table load 915 kg max. size of workpiece LxWxH 3050 x 1545 x 25 mm sheet thickness - max. 25 mm height of material-table 375 mm table height over floor 900 mm rapid traverse x / y / z axis 24 / 24 / 25 m/min weight of the machine ca. 14,2 t Isdpfsx H Tuuox Ahyoht dimensions of the machine ca. 8 x 2,9 x 2,6 m Well-maintained laser cutting system (CO2 gas laser) with travel distances x/y/ z = 3260 x 1545 x 430 mm, maximum working area: 1525 x 3050 mm, 3rd turning axis NC rotary table for mounting tubes (therefore Z-axis 430 mm), gantry loader with vacuum lifter for feeding new sheets and lifting unit for removing finished sheets, as well as control cabinet with operating elements, tapping unit with drill magazine, automatically retracting protective hood, Donaldson extraction system, cooling system, further technical data available upon request. The gantry loader uses a vacuum lifter to pick up the new sheets, automaticallypicks up the laser-cut sheet during transport, sets the new sheet down, and then moves it to the delivery table for the finished sheet, where it is placed – see video 2. The extraction system, cooling system, and transformer are mounted on the platform above the machine. Mazatrol Preview M control unit with color TFT, 64-bit CPU, 20 GB hard drive, EIA/ISO format programming.

Year of construction: 2005, condition: used, content 500 Liter capacity in bar 11 bar Temperature range -10 bis + 50 °C Dimensions (LxWxH) 1,8 x 0,8 x 0,8 m weight ca. 200 kg Ihsdpfx Ahov Rrrnjyet Used compressed air tank from Maschinen- und Behälterbau Mittweida GmbH. Includes a pressure gauge, 4 outlet connections, and 1 supply connection.

Condition: excellent (used), quality grade 1 Isdeu Dpayspfx Ahyjht

Condition: used, length 1200 mm Iedpfjtq I Rqex Ahyjht width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 1976, centre height 76 mm centre distance 190 mm spindle bore 21 mm taper MK 3 weight of the machine ca. 40 kg dimensions of the machine ca. 720 x 210 x 215 mm Ihedpfx Ahju Twclsyst Barely used Jung optical dividing head with tailstock in a wooden box with 9 collets: 3, 4, 5, 6, 7, 8, 9, 10, 11 mm. Reduced special price.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 25-50 kg/cycle - Electric demands: 0,6 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 710x800x2000 mm - Weight: 100 kg - Number of trays: 11pcs - Dimensions of trays: 570x570 mm - Drying surface: ~3,6 m2 Ijdsd Atipjpfx Ahyjht - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. Requires minimal maintenance.

Year of construction: 2026, condition: new, Condensation drying of air and indirectly of foodstuffs (fruit, tea, mushrooms and such) is the most energy-saving way of removing water from different materials. It works on the heat pump principle- by cooling on a steamer temperature below the dew point is reached, due to which the surface of the steamer becomes wet with moisture from the air. The heat extracted from the air goes immediately back to the same air, with the help of electric energy needed for the operation of the compressor, 20-30% more heat is generated. - suitable for drying various fruits (apple, plum, peach, etc.) - adjustable temperature and humidity control - automatic ventilation - with stainless steel shelves Specifications: - Performance: 50-100 kg/cycle - Electric demands: 1,2 kW, 230 V - Drying temperature: 40-60°C - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 1420x800x2000 mm - Weight: 200 kg Iodpod Atghsfx Ahyoht - Number of trays: 22 pcs - Dimensions of trays: 570x570 mm - Drying surface: ~7,2 m2 - IP65 certified electronics - Continuous ventilation, consistent heat - Insulation: 70 mm polyurethane - Closed condensation circle, condensate drain Suitable for fruits, vegetables, herbs, spices, pastes, mushrooms. Very easy to clean. It requires minimal maintenance.

Condition: used, diameter 315 mm bore 89 mm Machine dealer with own stock of 1600 m². Iedpfsx Edumjx Ahysht

Condition: new, Knife grinder Motor: 2.2 kW / 2800 rpm, 220V, Ijdpfxoxvxbco Ahyoht Capacity: 400-800 kg/h for fruit, 40-200 kg/h for dry material Screens: 4 pieces, according to request. Purpose of the machine: Pre-chopping and grinding. Suitable for grinding the following products: - Grains: wheat, corn, peas, pepper, caraway. - Pressed seeds: sunflower cake, soybean meal, pumpkin seed cake, linseed cake, poppy seed cake, etc. - Raw fruits and vegetables: pepper, plum, apricot, apple, quince, pear. - Dried fruits and vegetables: pepper, onion, garlic, raspberry, blackberry, apple, sour cherry, etc. Main components of the machine: - Frame - Safety switch - Motor 380V or 220V - Housing - Hopper - Sieve - Knives - Dosing regulator Available in stainless steel version.

Year of construction: 2025, condition: new, Creamer, pulper, peanut butter maker machine (Stone mill creamer, pulper) The cream or butter produced has such a fine particle size that it flows out of the machine like oil, with no perceptible coarse particles. Machine function: Cream preparation, pumpkin seed grinding, coconut grinding. Suitable for creaming or pulping the following products: Ihsdpfx Ahoxvrxzoyot Oilseeds: - Peanuts, hazelnuts, almonds, walnuts, cashews - Pistachios, sunflower seeds, pumpkin seeds, hemp seeds, coconut - Soy milk (tofu), chickpeas (hummus) Water must be added when processing soy milk and chickpeas! Oilseeds must be heat treated before processing. Creaming fruits and vegetables: apricot, plum, pepper cream, garlic cream Motor: 4 kW 380V Capacity: 20–60 kg/h Cream fineness, particle size: 50–150 micron

Year of construction: 2025, condition: new, functionality: fully functional, Nutcracker Materials that can be cleaned: -hazelnuts, -walnuts, -plum stones, -apricot stones, -sour cherries, -cherry stones, -almonds Machine function: Crushing, breaking, removing seed shells. -Motor 380v or 220v, 2.2 kw Ijdpfx Ajwizubjhyoht -Capacity 120-900 kg/h -Efficiency 98%-100%

Year of construction: 2020, condition: new, Stainless steel design auger type infeed hopper Ijdpfx Ahscl Tu Ijyoht For de-stoning of cherries, plums, sour cherries, apricots, peaches,... For different sieves Sieve with perforation Ø 5 mm is in the machine Electrical power supply: 400V 50 Hz 3 Phases / 11 kW Capacity: 2500 kg/h (depending on fruits and ripeness) Stepless rotor speed regulation

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Ijdpfx Asvtgn Njhyjht Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, current intensivity 140 A plate thickness 1,5 mm welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m Ijdpoxbtmdofx Ahyeht

Condition: used, thickness of jaw 160 mm max. clamping width 240 mm ca. tension force ca. 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Fixed low special price. Isdov Dxyxopfx Ahyjht Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min Iodpfx Asvxllkehysht feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1970, bore capacity in steel (diameter) 50 mm throat 300 mm Ihodpsvlah Hsfx Ahyst bore stroke 200 mm spindle taper MK 4 spindle turning speed range 55 - 600 U/min table diameter 500 mm column diameter 180 mm feeds 0,07/0,11/0,16/0,22 mm/U total power requirement 1,47 / 1,84 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1,3 x 0,65 x 2,17 m Heavy-duty pillar drill with a 2-speed motor and speed adjustment via a pulley. This machine is available at a special price! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1991, saw blade diameter 425 mm cutting diameter 130 / 140 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 260 x 80 mm cutting speed 11 / 22 m/min capacity 45 degrees: flat 180 x 80 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm work height max. 1050 mm Drive 1,6 / 2,5 kW weight of the machine ca. 1160 kg Iedovmtdkjpfx Ahyoht dimensions of the machine ca. 1,25 x 1,2 x 1,9 m Semi-automatic hydr. Miter circular saw machine with miter adjustment via turntable, saw blade comes from below, hydr. Material clamping, stepless feed speed, 1 horizontal vice. Semi-automatic operation means: 1. Clamp the material, 2. Saw, 3. Saw blade return, 4. Relax the material. Infeed roller conveyor 2000 mm and discharge roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine would be available for an additional charge of €300. But they should be adjusted by the buyer. (see last picture). The price is an already reduced special price. For an additional charge at cost: 2000 mm infeed roller conveyor and 1500 mm outfeed roller conveyor with stop. 400 mm roller width from a similar machine would be available for €300. However, these must be customized by the buyer (see last image). Machine dealer with own stock of 1600 m².

Condition: used, thickness of jaw 160 mm Isdpfx Aoumncdjhysht max. clamping width 240 mm ca. tension force 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Fixed low special price. Machine dealer with own stock of 1600 m².

Condition: used, dimensions 410 x 410 x 860 m Base unit for a Müller swing-arm grinding machine with electrical cabinet. Inside are motor protection switches, fuses, 16 A sockets, etc. The electrical components are shown in photo no. 2. The grinding machine was sold without the base unit at the buyer's request. Thebase dimensions are 300 x 300 mm. With modifications, the base unit can be Iedpjxxbzqofx Ahyeht used for any similarly sized machine.