Used Pm Trac for sale (58,911)

Year of construction: 2025, condition: new, Winder with traverse guide, for different bobbin sizes, traverse width and speed are adjustable, plug in and play MADE in GERMANY Nljdpfx Agsdv N Egszok

Year of construction: 2008, condition: ready for operation (used), The GIF-2000 continuous ice cream freezer (built in 2008) from Gram Equipment is a high-performance freezer that can operate with a capacity of up to 2000l/h. The freezer is mainly used for ice cream or sorbet ice cream, but can also be used for cooling or freezing other liquid products such as yogurt, sauce, etc. The system was in use until September 2023 and was then professionally dismantled for rapid recommissioning. Detailed documentation is available and is included in the offer. Nlodpfx Agopyhdtjzek

Condition: refurbished (used), Hako Jonas / Sweepmaster 980 V Refurbished sweeper with various new parts, 6 months warranty, and new DGUV V3 inspection including test report. Working width with two side brushes: 95 cm Central sweeping roller: 70 cm Max. area performance: 5,800 sqm/h Hopper capacity: 60 L (2x 30L) Drive type: Petrol engine KAWASAKI FE 250 D / 4-stroke / 1 cylinder Installed new parts / repairs carried out: - All drive belts replaced - Drive wheel new Nljdpfew U A E Dox Agzek - Rear wheels new - Driver’s seat new - All V-belts/drive belts new - All ball bearings new - All oils and filters replaced - All rubber strips new - Sweeping roller and side brushes new - Cartridge filter new - Sweeping unit fully overhauled incl. new main sweeping roller and new side brush - New paintwork and corrosion protection Additionally, we offer: Service, repairs and sales for all common Hako models. CleanTec Cleaning & Municipal Technology UG (Office) Am Teufelsbruch 12 13587 Berlin (Warehouse/Workshop/Sales) Bahnstraße 18 16727 Velten

Year of construction: 2012, condition: excellent (used), 12 months warranty, demonstration unit, very good condition, only approx. 250 operating hours, available immediately - Oven according to DIN EN 1539 for solvent-based materials - Max. temperature: 300°C - Oven chamber: 750 x 750 x 750 mm (W x D x H) - External dimensions: 1510 x 1150 x 2200 mm (W x D x H) - Temperature controller: JUMO dTRON 04 - Permissible solvent quantity max. 19.30 g - Heating capacity: max. 21.78 kW, connected load 22.5 kVA, nominal current 32.6 A - Connection: 400V 3L/PE 50Hz - Cable with 63A plug, also suitable for fixed installation, then fused at 35 or 50 A Nodpfx Aeiq Uv Nogzslk - incl. 1 wire shelf insert - Weight 550 kg - Documentation Inspection possible by appointment at our warehouse. Oven, ovens, industrial oven, circulating air oven, chamber air circulating oven, tempering oven, heat oven, drying oven, curing oven, paint dryer, solvent oven

Condition: used, functionality: fully functional, In this offer you purchase a used large format scanner ‘Canon Colortrac M40’ Object of sale: 1 x Canon Colortrac M40 with the following equipment: incl. monitor incl. stand Suitable for Canon iPF series: 770/780/785/825/840/850/8400S/8400SE Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Nlodpfxewhcape Agzsk (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), OPM ISF120S Spiral mixer Nsdpfsv Rglcox Agzslk 120L spiral mixer, stainless bowl and spiral, variable speed, forward / reverse, with timer, 3Ph

Year of construction: 2025, condition: new, extruder 30 mm with die-face pelletizer, the housing, made from stainless steel, is swivelling. the lenght of the granules is adjustable by means of the cutting speed. Nlsdpfxjf Uc Ugj Agzjk optionally, we offer a transport belt for cooling the granules.

Year of construction: 2002, condition: used, Copy milling machine for aluminum machining Vertical milling head: Nljdpfxexta R Ts Agzok Longitudinal stroke: 2150 mm Transverse stroke: 230 mm Vertical stroke: 210 mm Horizontal milling head: Longitudinal stroke: 265 mm Transverse stroke: 280 mm Vertical stroke: 105 mm Spindle speed: 12,000 rpm Pneumatic workpiece clamping Minimum quantity spray device Pneumatic copy bolts on both units

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 3 h, overall weight: 7,000 kg, empty load weight: 3,500 kg, maximum load weight: 3,500 kg, color: white, Equipment: documentation/manual, rubber tracks, Very little used machine. Nsdsw Hggqjpfx Agzjlk

Condition: used, Year of construction: 2019, operating hours: 7,900 h, Serial number: 81180xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18539 Specifications: - 2019 model. - Hours: approx. 7900. - Weight: 47,040 kg. - 3 deck sight and return. Njdpfxsvgy Sbj Agzolk - crushing unit: Sandvik CH430. - Webasto with app control. - Raised undercarriage. - Extension of return link with original kit from dealer. - Central grease - Remote control - Service history - New main axle and shock cone Description: Keestrack H4e Concrusher with 7900 hours. Overhaul of crusher after 7450 hours. This job is well documented and the distributor of the crusher has supported the delivery and procurement of parts. Ready for delivery. Hours: 7900 Own weight: 47040 Total Weight: 47040 Model: H4E

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 170610, Stamping machine with heated stamping head Njdsxy Rk Depfx Agzolk

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Nledpfx Ajxlt Hfegzek Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Year of construction: 2025, condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Nsdpfx Ageiv H Ekjzolk This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: used, Year of construction: 2012, Hersteller CAT Stemmhammer CAT Nljdpfx Agjhmriuezsk für 2,5 - 4 t Bagger ohne! +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2025, functionality: fully functional, The 5-axis laser cutting system from the OPMT brand is a high-tech solution developed especially for the production and re-sharpening of PCD (diamond) and hard metal cutting tools. Thanks to laser processing, high surface quality is achieved without contact, while tool life and precision are significantly increased. The LTR-5AX model is suitable for both mass production and special tool processing needs with its robotic loading option and user-friendly software interface. It is especially recommended for companies processing wood, aluminum and composite materials. The machine is offered in Turkey with the CoreCut guarantee, and installation, training and service support are provided locally. The system, developed by the joint engineering of Joerg and OPMT, is actively used by many manufacturers in Europe. Delivery time: 8–12 weeks Nedpfxewr Tiis Agzjlk Warranty: 1 year Condition: New Price: On request For more information or to get a quote, you can contact us: Emre Özkan – CoreCut

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked impact crusher FTI-130s is a complete mobile system which moves on hydraulicly driven tracked system with 1 km/h speed and combination of a vibrated grizzly feeder, an Impact crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationality of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines can not reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: Model: FTI-130s Nodpfx Asx Dhl Hsgzjlk Production Capacity: 400-450 tons per hour Maximum Feeding: 500 mm Crusher Type: Impact Crusher SIZE: 1270x1200 mm CSS Setting: 0-50 mm Total Power: 500 kva Vibrating Screen: 1500x4200 mm Weight: 63 tons - Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2004, CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Nsdpfx Aoxxazcjgzjlk Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T

Condition: used, machine/vehicle number: XL913GC4207082093, axle configuration: 3 axles, first registration: 09/2007, total length: 13,880 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 9,010 mm, color: other, Year of construction: 2007, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - Drum brakes - Lift Axle - Steering Axle = More information = Axle configuration Tyre size: 385/65 Tyre profile: 40% Nsdpfxjxvp Hce Agzelk Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Make axles: BPW Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.710 kg Carrying capacity: 34.290 kg GVW: 42.000 kg Functional Tail lift: D`Hollandia, tail lift Identification Registration number: OJ-40-ZV

Year of construction: 2025, condition: new, 30 mm extruder with cross-head for smallest coating object´s, with cooling bath, puller and winder with guiding device Nljdpfof Uc Urox Agzjk

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are carefully manufactured and have a 1-year warranty! *Installation and Operator Training are FREE! FTC-200-S Mobile Cone Crusher (With Screen); It consists of a feeding bunker, cone crusher and stock conveyor belt and generator. FTC-200-S Mobile Cone Crusher (With Screen), which is moved by remote control on a tracked chassis, successfully completes all commands given by the user by moving on its tracks in all kinds of difficult climate conditions and rough terrain. FTC-200-S Mobile Cone Crusher (With Screen), is precisely designed and carefully manufactured for stone crushing and is the leading mobile cone crusher in the sector with a crushing capacity of 100-200 T/H per hour. FTC-200-S Mobile Cone Crusher (With Screen) does not require an extra infrastructure as a production method, it is moved by remote control as mobile and adapts to all difficult terrain conditions. TECHNICAL SPECIFICATIONS: Model: FTC 200-S Crusher Type: Cone Crusher Vibrating Screen Size: 1300x3000 mm Production Capacity: 100-200 T/H Maximum Feed: 185mm Total Power: 300 kVA Weight: 46,000 Kg Nledpsx Dhb Isfx Agzjk PLEASE CALL US FOR DETAILED INFORMATION!!!

Condition: used, Year of construction: 2002, CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Nodpfoxxayljx Agzjlk Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T

Year of construction: 2025, condition: new, PMH Filament strand pelletizer, Type SG10 Nljdekyt T Sopfx Agzek compact machine with two drives for feeding and cutting rotor designed for one strand with max. 3.5 mm diameter

Year of construction: 2023, condition: like new (used), Our compact extruder model EX20-25d Manufacturer: PMH GmbH Nlsdpfx Agoq R Tkwjzok Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 10-192 Screw nitrided Torque 55Nm Drive Three-phase drive with frequency converter Drive power [kW] 1.1kW Barrel material: nitrided Electrical connection values 3 / N / PE Supply voltage [V] 400V at 50 Hz Control voltage [V] 24V Ceramic heating tapes [W] 1200W Number of heating tapes 3 Max. Output approx. 5kg/h Max. Processing temperature [°C] 300

Condition: new, Year of construction: 2025, Our belt haul-off can be built in different sizes. Nlodpfxehd Ndxe Agzsk 40-80 m/min Contact length 170mm to 800mm MADE in GERMANY

Year of construction: 2025, condition: new, Extruder 30 mm - 28 l/d with die for weldingwire extrusion or profilextrusion Nodpei Tu U Usfx Agzolk with cooling bath with adhesive water blow-off with haul-off with winder and guiding device