Used Pneumatic Angle Grinder for sale (14,240)

Condition: used, Year of construction: 1993, Technical details: material: PUR Schaum Rotor-Ø: 315 mm Gbedpju Nxdfefx Ahnon compressed air: 6 bar The milling plant with milling and opening-up machine REKORD BR-ex (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel *

Condition: used, Technical details: clamping surface area: 1000 x 500 mm weight of the machine approx.: 530 kg dimensions L x W x H: 0,5 x 1,0 x 0,49 m Gbodpfsu Rd Nisx Ahnsn Angle extension table - machine table - machine clamping table with 33 x clamping holes M24 vertical mounting side: W x H: 800 x 450mm with 4 clamping grooves Ø 30 x 75mm *

Condition: used, Technical details: pressure: manuell t distance between columns: - mm stroke: ca. 20 mm machine weight approx.: 9,5 kg Godpeu Nftgefx Ahnebn dimensions of machine: L: 580 x B:280 x H:80 mm pneumatic cable terminal press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 20mm - tool holder: width=40mm ; length=90mm - maunal lever Ø 30 x L:300mm equipment - toolbox with div. round and hexagonal tool jaws see the picture i.D. *

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° Godpfx Aou Nkrbjhnebn weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm *

Condition: new, Technical data: Belt speed: 15 / 30 m/s Sanding diameter: 20 - 76 mm Carriage adjustment: 30° - 90° Surface grinding table: 400 x 100 mm Contact wheel ø x W: 195 x 100 mm Suction connection ø: 2 x 75 mm Speed: 1420 / 2660 1/min Motor power: 2.5 / 3.3 kW Dimensions (WxDxH), approx.: 750 x 1400 x 1200 mm Weight, approx.: 148 kg Features: - Consistent belt tension due to spring-loaded tensioning device - With cylindrical sanding device for sanding diameters from diam. 20 - 76 mm as standard - Quick and easy adjustment of the desired sanding angle - Graphite coating on the face grinding surface increases the sliding properties of the sanding belt - Large flat sanding surface with protective cover - Slow belt speed (15 m/s) optimal for sanding stainless steel and aluminum - User-friendly belt change, quick and uncomplicated - Quick and easy changing of the sanding rollers without tools - Various sanding angles from 30° to 90° easily possible - Shorter processing times compared to milling Scope of delivery: - Sanding belt K 36 - Rubberized sanding drum - 1 sanding roller for 1 1/4" (42/44 mm pipe) - 2 hinged protective discs - Sanding and support table Gbsdeqvmqyopfx Ahnsn - 2 x dust extraction nozzles diam. 75 mm - 2 x chip container - Graphite coating - Motor protection switch

Condition: used, Year of construction: 2019, control Fanuc Series 31i - B workpiece length - max. 300 mm Gbedpfxoy Tprpj Ahnjn grinding wheel diameter 356 mm grinding wheel width 75 mm quill stroke 45 mm

Condition: used, Kilia grinder with a throat diameter of 130mm is a reliable and durable device. The design combines high efficiency with good quality of minced meat produced. Mainly intended for grinding fresh and slightly frozen meat and vegetables. Perfect for small and medium-sized production plants. It has two gears, pushing auger, and lifter for 200l meat bins. Manufacturer: Kilia Model: E130, 130mm Height: 1900 mm Width: 2100 mm Length: 1400 mm Weight: 1200 kg Capacity: 230 l Electric power supply: 400V 50Hz 3N Total power: 11/17 kW Gjdpfjzbk Ndjx Ahnebn Throat Diameter: 130 mm

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Height of horizontal: - Conveyor belt width 600mm (extendable) Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Gjdpfx Aoi Igzfjhnobn Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm

Year of construction: 2021, condition: new, Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 2200mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. Gedpfxshh A The Ahnsbn PVC conveyor belt including carrier and corrugated edge Drive: Motor 1.1KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm (customizable) T-20 studs - 400mm pitch (customizable) 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2022, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Godpfx Aoilg U Eehnjbn Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,000mm (customizable) Angle in the bend freely adjustable Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, ​​felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x30mm T-40 lugs - 300mm pitch 2-layer particularly laterally stable We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2023, condition: new, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 3,750mm rising area: 3,200mm angle of inclination at the bend 45° total conveyor belt length measured on the ground: 6,000mm discharge height: 2,500mm horizontal height: 250mm design: aluminum construction - double profile reinforced 90x45mm Gjdpoht Uzasfx Ahnobn drive roller + deflection roller S235 steel welded and machined Ø100x520mm crowned, shaft fixed with clamping bearings. Drive: slip-on gear motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive ready for connection to motor terminal box (commissioning must be carried out by a qualified electrician) PVC conveyor belt DM 10/2 0+005 PVC including corrugated edges PVC green Conveyor belt width: 500mm 2 corrugated edges 40 high, 35mm wide, high frequency welded 46 T-40 studs, approx. 300mm pitch Belt material: 2-ply, particularly stable across the belt In the bend area, the belt is guided on both sides with 3 hold-down rollers each. The belt is designed with a 70mm edge-free zone on both sides. Due to the corrugated edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 290mm, results as follows: (top view) transverse arrangement 70+35+290+35+70mm Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2022, condition: new, Aluminum angled conveyor belt with substructure Conveyor length: 1000mm flat + 2400mm rising Pitch angle in bend 45°C Discharge height: approx. 2000mm Height of the horizontal top edge 300mm PPU conveyor belt FDA Food compliant Gedsht U Tdepfx Ahnjbn Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width 400mm T20 studs welded - pitch 202mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 30mm sidewall high frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement -70/+35/-5/+190/-5/+30/-70mm Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.3m/sec Connection 220/400V, 50Hz protection class IP54 Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grid, magnetic grid, metal separator, block magnet, filter systems

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal. Gedpfx Aheh Elhzonsbn

Condition: new, Year of construction: 2024, machine/vehicle number: 20244051202, Aluminum angle conveyor belt with substructure including adjustable feet and machine feet to level unevenness horizontal area: 1,500mm rising area: 2,100mm angle of inclination at bend 45° discharge height: 1,700mm aluminum construction - double profile reinforced 90x45mm drive: slip-on gear motor 0.55KW, speed 0.3m/sec connection 230/400V, 50Hz protection class IP54 PU conveyor belt including corrugated edges & cleats conveyor belt width: 600mm 2 corrugated edges 50 high, 25mm wide, 24 T-40 cleats belt material: 2-ply, particularly stable across the belt permanent overbelt magnetic separator TYPE PEM1200 1200 x 550 x 200mm 4x eyebolt for suspension Drive: slip-on gear motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz protection class IP54 PU conveyor belt endless 7 x T20 studs high frequency welded Magnet dimensions: 700x230x120mm Our core competence lies in providing the customer with exactly what they really need. We work with our customers to develop customer-specific, individual solutions and supply corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Gbodpfeg At Hbex Ahnen Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator

Year of construction: 2023, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure including adjustable feet and machine feet for levelling horizontal range: 2,500mm Rising area: 800mm Lead angle in bend: 40° Total conveyor length: 3,100mm Discharge height: 700mm Godsk Scxiopfx Ahnjbn Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 2-layer particularly laterally stable Usable width 370mm

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 4,500mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 800mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Gbedpfjk S D Nlox Ahnen Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: good (used), Longitudinal travel 450mm Wheel diameter 175mm Turning tool holder Dividing head with collets Table D-140mm coolant installation MARCELS MASCHINEN CH Gbedpfjfgd Hhsx Ahnjn

Condition: used, Year of construction: 2022, Knapp angled roller conveyor accumulation 2430-510-450 RA2380 Gjdpfx Ahov I Hqtensbn Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 2430 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Roller angle: 7.6° Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2022, Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics Godpoud Dzvsfx Ahnobn

Condition: new, Year of construction: 2022, Interroll angled-belt conveyor 30° 1525-950-840 RA2327 new Make: Interroll Year of manufacture: 2022 Inlet angle: 30 Length: 800mm shortest length at angle starting, total length 2250 mm Belt width (RB): 840 mm ( 90 mm each ) Frame height: 160 mm Nominal/external width (NB): 950 mm, 1250 with motor average conveying speed: 0,76 m/s, with frequency converter stepples controllable Motor drive: Sew Movi Mot V 230/400, kW 0,75 Overall height side wall: 150 mm Gbodpfx Ahsvg Nd Tjnsn Optionally available: Supports All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2022, Knapp angled roller conveyor 600-510-450 RA2387 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Length: 600 mm Gbodpfx Ahev Ntfaenon Roller diameter: 50 mm Roller distance: 60 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 1999, • Year 1999 • In our possession since 08/2024 Gedpfezcvaqex Ahnebn • Quinto 4 software • Electrostatic filter, Elbaron model • Numerous spindles • Recent maintenance performed: external cleaning and repainting, spindle overhaul, spindle belt replacement, brush and front plexiglass replacement, wheel and door rail replacement, machine measurement, offset adjustment, ball reference setting, backlash check, replacement of the air filtration and lubrication adjustment unit, replacement of 4 electric fans.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 23087A, SPECIFICATION Maximum grinding surface 140 x 300mm Distance between column and wheel axis 300mm Max.distance between table and wheel 280mm Rapid feed per turn of handwheel 2mm Gsdpfjvntguex Ahnebn Micrometric feed by small handle 0.01mm Size of cup wheel 2.2kW Wheel speed 2840rpm Approximate weight 400kg MACHINE EQUIPPED WITH 260mm x 140mm x75mm (thickness) magnetic chuck Coolant system Guarding

Condition: good (used), functionality: fully functional, Type DZ 4 Gbodpfezck Uvjx Ahnon Press force at 6 bar 4 t Press force at 12 bar 8 t Table size W x D approx. 280 x 280 mm Installation height 350 mm Throat depth 160 mm

Condition: used, Year of construction: 1974, length 450 mm Gbjdpsydqnxefx Ahnen width 250 mm height 1.250 mm accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm distance between tapping holes H: 70 mm distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle