Used Pneumatic Feeder for sale (9,685)

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Fjdpfx Aew Rvu Dsl Uspn Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm -Dimensions: 790/260/H110 mm Fpodpfx Aljlw Az Aj Uen -Weight: 11 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, volume flow: 70 m³/h, screw conveyor length: 18,500 mm, total height: 21,000 mm, ejection height: 19,600 mm, Conveyor system for dry sawdust or other bulk materials Fpjdpfjz Ngtxsx Al Uon This conveying system was designed for filling silos with sawdust for a pellet production plant. It is in its original packaging and has never been installed or put into operation. It was stored in a dry and enclosed warehouse. Overall height: approximately 21 m Conveying capacity for dry sawdust: 70 m³/hour Drive power: 7.5 kW The photo shown is for illustrative purposes only.

Condition: good (used), Year of construction: 2006, functionality: unexamined, Internal article number: 26057 Pneumatic press Manufacturer: Schmidt Machine no.: 27-400084 Year of manufacture: 2006 Pressing force: 20 kN Stroke: 100 mm Safety distance: 348 mm Table: 200 x 150 mm Acceptance diameter: 20 mm Max. distance from table to acceptance point: approx. 270 mm Dimensions (L x W x H): 70 x 40 x 100 cm Weight: 60 kg Includes two-hand operation and emergency stop. Attention! The control unit for the machine is missing. Fpjdozx Scxjpfx Al Usn The press would have to be operated purely pneumatically. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Fpsdpfxozt Suke Al Ujn Price: 80,000 PLN Below are the specifications: Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Condition: ready for operation (used), 3-roller feed mechanism Manufacturer: Vegoma Type: Vario 3 3-4 revolutions/min Fjdoz Iz Iyopfx Al Uopn Left/right rotation

Condition: used, Year of construction: 1987, functionality: fully functional, overall weight: 5,000 kg, total width: 960 mm, total length: 1,860 mm, total height: 2,160 mm, Pneumatic Forging Hammer MA4132 – 160 kg Heavy-duty pneumatic forging hammer, believed to be model MA4132, manufactured in the USSR. The machine is complete with separate anvil/base and electric motor. Technical data: Fodpfxszxd E Ss Al Ujpn Falling parts weight: approx. 160 kg Main machine weight: approx. 3,700 kg Anvil/base weight: approx. 1,000 kg Electric motor weight: approx. 300 kg Total weight: approx. 5,000 kg Motor power: approx. 15 kW* Year of manufacture: believed to be 1987* Serial/identification marking on the machine: “87 №149” Location: Estonia Solid, heavy industrial forging hammer suitable for blacksmithing and forging work. The machine is sold as shown in the photos. Loading can be arranged by agreement. Inspection is possible by appointment. More photos and video available on request. *Some technical specifications and year of manufacture are based on identification of the machine as MA4132 and should be considered approximate.

Condition: excellent (used), Year of construction: 1974, Catalog number: 7685 TECHNICAL DATA - inlet width: 440mm - inlet height: 300mm - shaft width: 480mm - shaft diameter: 440mm - number of knives: 2 pcs - screen dimensions: 50x50mm - toothed drive shaft, top and bottom - shaft motor: 0.78/1.1kW - electric auto-reverse (with adjustable speed) - with conveyor belt Fsdpfx Alezruc Ue Uopn - length of feed belt: 4006mm - width of feed belt: 380mm - belt feed direction: forward/reverse - main motor: 30kW - dimensions (L/W/H): 6100x1100x1100mm - weight: approximately 2000kg ADVANTAGES - German-made - with conveyor belt - auto-reverse - used shredder, very good condition Net price: 76,900 PLN Net price: 17,880 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 1999, functionality: fully functional, 1 x Bar feeder Iemca CH 220/32 Year of manufacture: 1999 Fodpfoz Hpnfox Al Uopn Bar machining diameter: 2 - 20 mm Bar length: 3200 mm Built-in channel: 16 mm Previously used with a CNC long turning lathe Star SA 16 The bar feeder can be inspected at our warehouse at any time.

Condition: excellent (used), functionality: fully functional, KUVERTANLEGER Wahli Feeder . Fpjdpfxsupmzqe Al Uen

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Fpedpeyuuc Iefx Al Uon Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: used, Cabbage corer on a stainless steel stand This cabbage corer removes the hard core from a cabbage. The cabbage goes into the opening at the top, the toothed coring head comes down pneumatically and turns the core out; the removed core drops out underneath. The machine is built entirely in stainless steel and stands on four legs with adjustable feet. The pneumatics sit in a box on the side. There is no type plate, so make and year are not known. Trying it with your own product can be arranged. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Cabbage corer Drive: Pneumatic Controls: Pneumatic box with valves Fpedpfxez Ndkys Al Usn Construction: Stainless steel, on legs with adjustable feet

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Fsdpfxjz Nc S Nj Al Ujpn Construction: Stainless steel

Condition: excellent (used), functionality: fully functional, a complete workstation with integrated pneumatic system. featuring pneumatic two-hand release Force: 45 kN Stroke: 60 mm Fpodpsz E A Ehsfx Al Ujn

Condition: ready for operation (used), Burger D05 Pneumatic Press Weight: 230 kg Pressing force: 6000 kg Stroke: 39 mm Operating pressure: 6 bar You are welcome to visit us for an inspection. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and view our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change. Fpjdez Hya Ejpfx Al Ujn

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Fodpfjz Hv U Sex Al Ujpn Overhang 130 mm Table 200 x 150 mm

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Nominal force: 12.5 kN Fedez Hlzhopfx Al Uopn Stroke: 100 mm Includes SCHMIDT PressControl 75 in the two-hand safety version Weight approx.: 45 kg 51026ä

Condition: used, nett width 500 mm dimensions: ± 3.000 x 800 x 1.200 mm aluminum step: ± 2.150 x 700 mm gutter length: 2.300 mm loading height: ± 1.200 mm motor stainless steel 400V, 50 Hz Fodpfx Alez Imx Re Uspn Power: 5.20 A output height: ± 700 mm 1 vibration motor Shock absorbers Vibro feeder completely stainless steel Vibro gutter chassis steel + aluminium Opening grid: 4 mm and 8 mm

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, bar length: 4,000 mm, bar diameter (max.): 42 mm, 4m feeder and 5 sets of bushings Fpodpfxev Im Ule Al Uon

Condition: like new (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, pressing force: 1 t, table width: 200 mm, table length: 230 mm, total width: 400 mm, total height: 860 mm, overall weight: 105 kg, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm Fjdev E Sazopfx Al Uspn length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used . Fsdpfxeyt Hu To Al Uspn More photos and full specifications: /

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 770155, spindle bore: 42 mm, spindle speed (max.): 7,000 rpm, We are offering this very well-maintained INDEX C100 multi-spindle automatic lathe with an Index MBL bar feeder and fine cleaning system, manufactured in 2009. Fodpfx Aez E Ikpel Ujpn If you have any questions or require further information, please do not hesitate to contact us via message or by phone.

Condition: used, For sale are 4 units of high-quality and robust pneumatic helical agitators from the premium manufacturer Graco, mounted on adjustable aluminum profile rails. These units are ideal for efficiently homogenizing highly viscous materials in 200-liter drums (55 gallons) as well as open containers. Technical specifications: • Manufacturer: Graco Inc. • Model / Type: Twistork Helix Agitator (Part numbers: 224854) • Drive: Pneumatic rotary vane motor • Power: 1.5 HP (approx. 1.1 kW) • Max. operating pressure: 7 bar / 100 PSI Fpsdpfx Aloz Inhms Ujn • Max. speed: 800 rpm • Max. viscosity: up to 10,000 cP • Length of the agitator shaft: approx. 95 cm (37.25 in) • Explosion protection: ATEX certified (Ex II 1/2 G c T3 / ITS03ATEX11225) – absolutely safe for solvent-containing media and potentially explosive areas. • Special feature: Reversible (direction of rotation can be reversed), hermetically sealed drive prevents contamination and evaporation of the medium.

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Fsdpfoz N Sixjx Al Uspn Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Compressed air supply.

Condition: used, Used Siemens SIMATIC pneumatic interface EM 148-P for controlling a Festo CPV-14 valve manifold within the decentralized peripheral system ET 200X. Manufacturer: Siemens Series: SIMATIC DP / ET 200X Fpsdez N Hk Rjpfx Al Usn Model: EM 148-P Article number: 6ES7148-1EH11-0XA0 Device type: Pneumatic interface Digital outputs: 16 DO Pneumatic Valve manifold connection: Festo CPV-14 Power dissipation: Typical 9 W Operating pressure: 3–8 bar Condition: Used Quantity: 1