Used Portal Cnc Machine for sale (84,678)

Condition: used, spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Control Heidenhain bore capacity in steel 40 mm spindle taper MK 4 Kedpjxwzg Rsfx Ab Nend bore spindle stroke 170 mm spindle turning speed - stepless 10-2.000 U/min ll diameter 230 mm table dimensions 900 x 770 mm vertical travel of crossrail-slide 630 mm boring spindle 6 Stück/ 0.02-0.20 U/min distance between columns 900 mm Passage between spindle and table 815 mm spindle drive 4 PS total power requirement 380 V weight of the machine ca. 3,9 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors Kedewhk Ubepfx Ab Nend - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: like new (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, LIEBHERR LK 200 – CNC Gear Skiving Machine Main technical data CNC control: Siemens HMI (Liebherr LHStation / LHMobile operator concept) Max. module: approx. 3.0 mm Max. workpiece diameter: approx. 200 mm Max. workpiece weight: approx. 25 kg Table diameter: approx. 285 mm Axial travel: Axial stroke up to approx. 500 mm Machining stroke / shift distance: approx. 400 mm Max. spindle power: 16 kW Knodpfxsxwzvlo Ab Nod Max. workpiece spindle speed: 3,000 min⁻¹ Max. feed rate (radial): 7,500 mm/min Hob / tool speed: up to 4,000 min⁻¹ Max. tool diameter: approx. 150 mm Wet machining Especially for internal gears, wet machining offers major advantages: During the skiving process the cutting edges are cooled and lubricated, which significantly reduces the thermal load on the tools. The chips produced are reliably removed and are not drawn back into the cutting zone. Optimal chip evacuation leads to improved gear accuracy and superior surface quality. LHStation & LHMobile operator concept Liebherr intelligently separates programming and machine operation into two units: LHStation (fixed operator panel / monitor): Large screen area for data input and process monitoring Multi-touch surface with additional tactile elements Increased operating speed and process reliability LHMobile (mobile handheld unit): 10" multi-touch as standard Context-sensitive views such as PLC/NC keys, program status and messages Wired signal transmission for maximum safety during setup Ideal for ergonomic, user-friendly operation directly at the machine Skiving³ – overview of advantages Machine Very rigid machine design with cast-iron bed to absorb process forces Ringloader concept for fast workpiece change Tailstock for shaft machining and optimum workpiece clamping Optional chamfering during the machining process Burst-proof enclosure, suitable for both dry and wet machining (oil or emulsion) Tool Design and manufacture of conical and cylindrical skiving cutters Process-optimized tool design for every workpiece Tools available in PM-HSS and solid carbide versions Process Comprehensive process analysis and simulation to determine optimum cutting conditions Use of technology applications for customized process optimization Collision analysis with calculation software to secure the process Machine concept – efficiency through gear skiving Gear manufacturers are looking for alternatives that are: More productive and cost-effective than gear shaping At the same time more flexible than broaching The LK 200 is designed exactly for this: The basis is the high rigidity of the machine bed and skiving head (special bearing concepts, also for longer tool holders – crucial for internal gears). Combined with a burst-proof housing, the machine is suitable for both dry and wet cutting. The integrated tailstock unit makes the system universally usable for: External and internal gears Shafts and short gears on one machine By combining machine, tool and process (Skiving³), the LK 200 offers a fully integrated solution for highly productive gear skiving.

Year of construction: 2006, condition: ready for operation (used), Main Drive Number of axis 3 Movement Y-Axis Movement 250–300 mm Z-Axis Movement 250–300 mm Knjdpfx Ajxxngaeb Njd This 3-axis SCHÜCO PBA 3250 was manufactured in 2006. It features a working length of approximately 3250 mm and is capable of processing aluminum and steel profiles. Equipped with a CNC controller and Schüco software, this machine is fully functional and has been regularly maintained. If you are looking to get high-quality milling capabilities, consider the SCHÜCO PBA 3250 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Kjdpfsw Rrvwex Ab Nond Manufacturer: EMCO Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Kedpfjq Ixc Tex Ab Nond Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: used, Year of construction: 2017, Type: CNC Polishing Machine Manufacturer: Diema Model: CNC-Maxi Year of Manufacture: 2017 Serial Number: 22.003 Condition: Used Quantity: 1 Ksdjxnmtdjpfx Ab Nsnd

Condition: used, Year of construction: 2011, - Heidenhain TNC-320 CNC control - Electronic handwheel HR-410 - Heidenhain glass measuring rods on all axes - Ball screws - Hydraulic tool retractor - AC servo feed motors - Sliding doors with safety glass - Universal milling head - Hardened guideways - Plastic-coated counter guide - Electromagnet. Main spindle brake - Automatic central lubrication system - Integrated coolant system - Steel telescopic cover for transverse travel - Steel telescopic cover for longitudinal travel - Work light - Year of manufacture 2011 Specifications Worktable: - Table clamping area: 1800 x 500 mm - Max. workpiece weight: 1000 kg Travel paths: - X-axis - Longitudinal travel: 1250 mm - Y-axis - Transverse travel: 540 mm - Y-axis - Transverse travel with steel telescopic cover: 500 mm - Distance between spindle center and column: 500 mm Column: - Z-axis - Vertical travel: 550 mm - Distance between spindle nose and table with vertical head position: approx. 50 - 600 mm - Distance between spindle nose and table with horizontal head position: approx. 360 mm 910 mm Milling spindle: - Tool holder: DIN 2080 ISO 50 - Speed range: 40 - 2000 rpm Feeds and rapid traverse rates: - Longitudinal/transverse feed: 4000 mm/min - Vertical movement (column): 2000 mm/min - Rapid traverse longitudinal/transverse: 4000 mm/min - Rapid traverse vertical: 2000 mm/min Motors: - Milling spindle motor: 11 kW Knjdewf Ntqspfx Ab Ned - Feed motors for X/Y/Z axes: 1.5 kW each - Coolant pump: 0.12 kW - Lubricant pump: 12 W Installation: - Dimensions W x H x D: 3000 x 1880 x 2660 mm - Net weight of the machine: approx. 3800 kg

Condition: good (used), Year of construction: 2001, Ref. -No.: 10614 Manufacturer: CHIRON Type: FZ 18 K Year of construction: 2001 Type of control: CNC Knedpfx Aexvw Saob Njd Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: 630 mm Y-Travel: 400 mm Z-Travel: 630 mm Table surface area (LxW): 970 x 470 mm Tool Taper: SK40 Tool places: 40 Max. Tool Length: 280 mm Max. Tool Diameter: 78 mm Max. Tool Weight: 8 kg

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,907 h, General Data Machine weight 9000 kg Control Unit Brand HEIDENHAIN Table Table load 800 kg Knsdpfx Ajxx Dvkeb Njd Main Drive Number of axis 5 Spindle Speed 14000 RPM Spindle motor power 29.3 kW Tool taper BT 40 Movement X-Axis Movement 1020 mm Z-Axis Movement 610 mm Y-Axis Movement 610 mm Tools Slots in storage 32 Max weight 7 kg This 5-axis Eumach HSM-5XC was manufactured in 2015, featuring a Heidenhain control unit and a robust 5-axis rotary table with a Ø 610 mm diameter. It supports a maximum workpiece load of 500 kg and offers extensive axis travels (X/Y/Z: 1020/610/610 mm). The spindle reaches speeds up to 14,000 rpm, powered by a 29.3 kW motor. If you are looking to get high-quality milling capabilities, consider the Eumach HSM-5XC machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser including other small accessories including documentation Kodpfx Absxwdwfe Njnd without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Condition: used, Year of construction: 2014, x-travel 700 mm z-travel 400 mm y-axis 550 mm max. table load 650 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Kjdpfexvdvfsx Ab Nsnd of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with Knedjwrkcyspfx Ab Nsd -Separate PT 700 / Leonard and Bauer Economic controller for positioning table for punching -Foot switch

Condition: used, Year of construction: 1987, - Lid Contour 3 CNC control Knsdpfju Awlzex Ab Ned - Sliding vertical milling head with extendable spindle - counter bearing for long milling arbors - Hydraulic tool clamp - Automatic speed gearbox - Automatic clamping in X/Y/Z axes - Automatic central lubrication - coolant device - direct path measurement - Collision protection clutch in Z/Y axes - year of construction 1987 Technical data Working range: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Vertical quill stroke: 80 mm - Vertical milling head can be moved on headstock: 150 mm Main drive: - Motor: pole-changing three-phase AC brake motor and manual gearbox with clockwise/anticlockwise rotation - Power: 3.7 / 4.4 kW - 18 working spindle speeds: 50 - 2500 rpm - Step change: 1.25 - Tool holder: SK40 (M16) - Tool clamp: hydraulic Feed drive: - X-axis: 1 DC motor - Y- and Z-axis: 1 DC motor - All axes: ball screws - Feed speed programmable: 10 - 1000 mm/min - Rapid traverse X-/Y-/Z-axis: 2000 mm/min Universal table: - Number of T-slots: 7 - T-slot width: 14/H7 mm - T-slot spacing: 63 mm - Center bore Ø/depth: 63H6 / 8 - Distance from table center to screw-on surface: 260 mm - Max. Passage height (vertical milling spindle/table surface): 490 mm - Permissible load: 300 kg - Weight: 230 kg - Rotation range in horizontal position (axis C): 360 ° - Tilt range (axis A): +450 / -150 ° - Pivoting range (axis B): ± 450 ° - Measuring range with direct digital display: Resolution 360000 x 0.001 ° - Reduction ratios: 60:1 / 120:1 / 240:1 Installation: - Space requirement with safety area: approx. 2.3 x 2.5 m - Operating voltage: 400 V / 50 Hz - Total connected load: 7.5 kW / 9.5 kVA - Machine weight: approx. 1830 kg - Floor load: 3000 kg/m²

Condition: good (used), Year of construction: 2000, Ref. -No.: 10609 Manufacturer: GLEASON - PFAUTER Type: P 2400 G Year of construction: 2000 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine length: 1100 mm Machine width: 6585 mm Machine Height: 5200 mm Max. Workpiece Diameter: 2640 mm Weight Of The Machine Ca.: 23 t Grinding Wheel Diameter: 400 mm Spindle Speeds (Infinitely Variable): 600 bis 6000 mm Grinding Wheel Width: 80 mm X-Axis: 1200 mm Y-Axis: 300 mm Z-Axis: 1000 mm Z2 - axis: 150 mm Sandable profile depth: 80 mm Workpiece table: 0 bis 5 1 / min Feed rate X-axis: 3000 mm Feed rate Y-axis: 5000 mm Z-axis feed rate: 6000 mm Ksdsxvw R Nopfx Ab Njnd Further information: - Fully automatic centering device - Oil mist separation - Gear tooth measurement - “Profile grinding” software package - Error diagnosis - IFK2 internal milling head - Milling mandrel with spacer discs - Chip conveyor - Oil mist extraction - Technical documentation

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 6500 kg Main Drive Knodpfoxwzx Tex Ab Nod Punching force 300 Kn This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Kodpjxuqv Ajfx Ab Nsnd Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Knjdpoxupg Tjfx Ab Ned See document

Condition: good (used), Year of construction: 1996, CNC Milling Machine Hermle UWF 902H + Renishaw probe + 34-position tool changer Knjdpfow U Dvqox Ab Nsd The horizontal spindle was defective and has been removed! Year of manufacture: 1996 Control: Heidenhain TNC 426 Spindle hours: approx. 9,000 Operating hours: approx. 60,000 Spindle: SK40 Speed: 20 - 6,300 rpm Travel: X 600 / Y 450 / Z 500 mm Table: 600 x 450 mm Total power requirement: 16 KVA Dimensions (approx.) LxWxH: 300 x 220 x 230 cm Weight: approx. 5 t

Condition: used, Year of construction: 1998, control Siemens Sinumerik Kedpsxuv Udefx Ab Njnd grinding wheel diameter 900 mm grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 1985, Ref. -No.: 10595 Manufacturer: GILDEMEISTER MAX MüLLER Type: MD 6S Year of construction: 1985 Type of control: CNC Control: EPL 4 Storage location: Halberstadt Country of origin: Germany Tool holder type: 2 x VDI 50 Centre Distance: 1765 mm Spindle passage: 101 mm Swing diameter over bed: 720 mm Swing diameter over cross slide: 490 mm Lathe chuck diameter, max.: 400 mm Power Capacity: 50 kW Knodpfsxvw Rcox Ab Njd Weight Of The Machine Ca.: 16 t Turning Speed Range: 10 - 2800 rpm Quill holder: MK 5 Further information: - Equipment - Powered tools - Tailstock - Automatic quill stroke - Chip conveyor - Automatic sliding safety doors - Hydraulic steady rest - 2 turrets

Condition: used, Distance between centres: 1000 mm Centre height: 250 mm B-axis: Accuracy 0.1" Knsdpfx Aboxmg Eks Njd CNC brand: Kelco CNC model: 90 Left grinding wheel dimensions (OD x ID x width): Ø400 x Ø127 x 63 mm Right grinding wheel dimensions (OD x ID x width): Ø400 x Ø127 x 50 mm Workhead swivel: -30º to +120º Workhead taper: MK 5 Max. workpiece weight between centres: 150 kg Tailstock taper: MK 4 Tailstock quill travel: 50 mm Maximum peripheral speed: 32 m/s High-frequency internal grinding spindle: Ø120 mm High-frequency internal grinding spindle brand: WARNER model K 3.000 Main motor power: 7.5 kW Total power: 26.5 kW Max. Z-axis travel: 1,150 mm Max. Z-axis feed speed: 15 m/min Worktable rotation: 0º to 9º Max. X-axis travel: 320 mm Max. X-axis feed speed: 7.5 m/min Length: 3,600 mm Width: 2,000 mm Approx. weight: 5,000 kg

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 117 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm Knsdpfx Abexukrqs Nsd (up to 70 kg/mm2 Strength of the material)

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Knjdpfxsxx Svxe Ab Nsd Internal coolant supply (IKZ): 65 bar incl. chip conveyor incl. special operator panel

Condition: good (used), Year of construction: 1998, Ref. -No.: 10583 Manufacturer: MTE Type: BF 4200 Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 Storage location: Halberstadt Country of origin: Germany X-Travel: 4000 mm Kodsxvw Nrepfx Ab Njnd Y-Travel: 1200 mm Z-Travel: 1500 mm Turning Speeds: 2.500 RPM Rapid Traverse X/Y/Z: 400 m / min Table surface area (LxW): 4200 x 1000 mm Tool changer: 40 Table load max.: 13.000 kg Tool Taper: SK 50 Weight: 20 t Number Of T-Slots: 7 Pcs Width of the T-slots: 22 mm Distance between the grooves: 140 mm Further information: - Heidenhain Handrad HR410 - 3D-Scanner, Infrarot - Die Kugelspindel auf Achsen Z und Y laufen eingespannt und aufgelagert auf kombinierte radial/axial Rollager und radial Kugellager mit bzw. 250 N/qm, Steifigkeit. Maschine kann unter Strom besichtigt werden.