Used Portal for sale (1,140)

Year of construction: 2021, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 2600 mm VERTICAL TRAVEL: 1400 mm RAPID FEEDS L-T-V: 60 m/min WORKTABLE: 3100 x 2800 mm HEAD: CONTINUOUS A/B AXIS ; HSK-63A ; A-axis ±110° - C-axis ±370° ; 20000 rpm; 39-37 kW; 92-117 Nm TOOL MAGAZINE: CHAIN-TYPE ; 60 POS CONTROL UNIT: HEIDENHAIN TNC640 Hodpewla Hhofx Ag Isi OVERALL DIMENSIONS: 7530 x 6600 x 5765 mm ACCESSORIES: FRONT AND BACK SWARF CONVEYOR ; PORTABLE HANDWHEEL

Year of construction: 2015, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2200 mm TRANSVERSAL TRAVEL: 3500 mm VERTICAL TRAVEL: 1400 mm RAPID FEEDS L-T-V: 30 m/min TABLE SIZE: 3500 x 2200 mm Hjdpfx Agswlwg Se Iei HEAD: A/B AXIS AUTOMATIC ; HSK-63A ; A-axis -110°+95° B-axis ±360° ; 24000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 42 POS CONTROL UNIT: FIDIA C40 Vision DISTANCE BETWEEN UPRIGHTS: 4200 mm WEIGHT: 62000 Kg ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Year of construction: 1993, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2800 mm TRANSVERSAL TRAVEL: 2200 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 20 m/min TABLE SIZE: 3000 x 2000 mm MAX ADMITTED LOAD: 20000 Kg HEAD: A/B AXIS AUTOMATIC ; ISO 30 ; A-axis ±100° - B-axis ±185° ; 15000 rpm; 11 kW TOOL MAGAZINE: CHAIN-TYPE ; 12 POS CONTROL UNIT: FIDIA CXR10 Hodswla H Ujpfx Ag Iei DISTANCE BETWEEN UPRIGHTS: 3600 mm OVERALL DIMENSIONS: 7000 x 4000 x 6485 mm ACCESSORIES: PORTABLE HANDWHEEL

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece Hjdpfxoxxvp No Ag Iei + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 250 mm, For sale is a used, but like-new SK0805 gantry milling machine. The machine has been regularly serviced at all times and is in excellent visual and technical condition. It is fully functional, tested, and ready for immediate operation. Hjdpfx Ajxwau Hsg Iji Our service commitment: For us, quality, expertise, and customer satisfaction are top priorities. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you at any time, even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: excellent (used), Year of construction: 2019, operating hours: 3,551 h, functionality: fully functional, machine/vehicle number: 0345, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 60, Machine powered at least until June 5, 2025 No reserve price - guaranteed sale at the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,600 mm Z-axis travel: 1,000 mm Distance spindle nose to table: 150 – 1,150 mm Distance table to gantry: 2,800 mm Control: HEIDENHAIN iTNC 640 Table Table dimensions: 3,000 x 2,400 mm T-slots: 28 x 13 x 180 mm Table load: 11,000 kg Spindle and feed rate Max. spindle speed: 4,500 rpm Tool holder: BT 50 Hedpfowm E S Ssx Ag Ioi Feed rate X/Y axes: 15 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 7 m/min Rapid traverse Y-axis: 7 m/min Z-axis rapid traverse: 7 m/min Positioning accuracy: ±0.005 mm over 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 60 Hz Connected load: 65 kVA Total length: 9,000 mm Total width: 8,000 mm Total height: 5,500 mm Power-on time: 11,498 h Program run: 5,585 h Spindle hours: 3,551 h Axis travel time: 3,945 h EQUIPMENT - 60-station tool changer including BT 50 tool holders - 4th axis from DETRON - Coolant system - Chip conveyor - HEIDENHAIN iTNC 640 control

Condition: good (used), Year of construction: 2009, Manufacturer: AJK Typ: 10W Build in: 2009 Hjdpfx Agsw Sm H Tj Iji Volume: 10m3 Weight: 4060 kg Backdoor: top hingend

Condition: like new (used), Year of construction: 2023, machine/vehicle number: VAKP0004, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,100 mm, travel distance Y-axis: 2,180 mm, travel distance Z-axis: 160 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 4,180 mm, workpiece height (max.): 160 mm, total height: 1,465 mm, total length: 4,550 mm, total width: 2,992 mm, Equipment: documentation/manual, As-new large-format gantry vacuum press 4.0 x 2.18 m BESSLER HOLZFRAESE, year 2023 Hjdpfx Asxaufxog Iei For sale: As-new large-format vacuum press for laminating large panels or manufacturing curved components. Very large pressing surface of 4.0 x 2.18 m. Excellent, near-new condition (used in a single-person operation), very little use. Includes complete accessories (vacuum hoses, vacuum pump). Vacuum pump VT 4.25 from Becker Dimensions approx. 4550 x 2992 x 1465 mm (LxWxH), approx. 800 kg Max. pressing format: 4000 x 2180 x 160 mm (LxWxH) Year of manufacture: 2023 The machine has been function-tested, disassembled, and is packed ready for shipping. Additional photos and videos available on request. Original net price: €36,250 plus VAT.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,612 mm, travel distance Y-axis: 5,645 mm, travel distance Z-axis: 1,250 mm, table length: 7,000 mm, table width: 2,500 mm, spindle speed (max.): 4,500 rpm, distance between stands: 3,800 mm, Technical Data • Table clamping surface: 7,000 × 2,500 mm • X-axis (longitudinal travel): 6,000 + 612 mm • Y-axis (cross travel): 4,670 + 975 mm • Z-axis (vertical travel): 1,250 mm • W-axis (vertical travel): 1,200 mm • Distance between uprights: 3,800 mm • Distance table surface – spindle nose: 2,015 mm • Drive power AC motor: 60 kW • Spindle speed, 2-step, digital spindle drive: 60 – 4,500 rpm • Feed rate in CNC operation (rapid traverse): up to 10,000 mm/min • X-axis: 20,000 mm/min • Y- and Z-axis each: 25,000 mm/min Hsdpoxgr Epsfx Ag Ioi • C-axis rotary table: ±180° • 45° milling head rotation: 360° Main components of the machine • Heidenhain path control iTNC 530 with 15" monitor • Tool changer with 60 positions • Rotary table for operation with multiple milling heads and automatic milling head change, consisting of collet system for holding various milling heads, quick couplings for hydraulic, coolant, and power supply, as well as the corresponding electrical safety switches • Centering of the milling heads on the rotary table using Hirth face toothing (on the mounting plate and respective milling head) • 2 x milling heads: straight-head adaptor (direct spindle), automatic 45° milling head • Crossbeam motorized traversable (for positioning only) • Operator platforms: 2 operator platforms with protective enclosure and integrated control panel, traveling along X-axis, each with 2 doors • Chip conveyor on both sides of the table plus a transverse conveyor • X-axis longitudinal and Y-axis cross drive by rack and pinion with 2 servomotors (play-free electronic pre-tensioning, master-slave principle) • Z-axis vertical adjustment by ballscrew (Ø 80) with preloaded double nut • Zayer guideway system made of inlaid or bolted, hardened steel strips • All axes equipped with INA roller recirculating shoes on each track surface • Counter-guides on all axes with additional polymer coating for optimal damping • Anchoring and leveling elements • The machine complies with the currently applicable EC directives The above information is taken from the machine documentation. The seller assumes no liability for completeness or accuracy. The decisive factors are the actual technical data and functions of the machine.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, Original purchase price of the machine: approx. €1,200,000 TECHNICAL SPECIFICATIONS Control system: CNC Fidia C20/6H-SB X-axis travel: 5,000 mm Y-axis travel: 2,500 mm Z-axis travel: 1,500 mm A-axis: ±110° C-axis: 360° (±182.5°) Spindle speed: 22,000 rpm Tool holder: HSK A63 Hedpfx Agowzkz Ij Ioi Tool changer: 6-position (pick-up) Milling spindle power: 30 kW Rapid traverse X/Y/Z: 20 m/min A/C-axis torque: 500 Nm A/C-axis speed: 20 rpm MACHINE DETAILS Total power: 90 kW Weight: 65 t EQUIPMENT - Control with HPX 20 hand-held unit - Coolant-lubricant system - Centralized lubrication for X, Y and Z axes - Hydraulic power unit HC22DT / 2.61-C5 - Enclosure and monitored loading doors - 14 used tool holders

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Fooke Endura Type 8. Year of manufacture 1999, Siemens 840 D Powerline control, X/Y/Z travel 3000/2500/1150 mm, Hsdov N Uuvjpfx Ag Iji Bridge height 800 mm, 23 kW milling spindle, Forked milling head with 365° rotation axis, Swivel axis +/- 100°, Feed rates up to 15 m/min, Spindle speed up to 16,000 rpm, HSK A 63, Electric handwheel, Machine weight 50,000 kg

Condition: good (used), Year of construction: 2000, Maka MM 7 T / 5 axes, year of manufacture 2000, Siemens 840 D control, X/Y/Z travel 2x1500/2000/600 mm, portal milling machine for light machining, milling spindle 7.5 kW, NC milling head, A axis 540°, B axis +/- 100°, 10-position tool changer, HSK F 63 holder, max. saw blade diameter 170 mm, spindle speed up to 24,000 rpm, X/Y axis rack and pinion, Z axis ball screw, vacuum table, aluminium flat table. Hjdpewuy Ahsfx Ag Iei

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Hedpfeuhzyqjx Ag Iji Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, vacuum pump, suction foot,

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Control: Heidenhain ITNC 530 Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Spindle type: SK50 / Gearbox spindle Hedpfx Agswx Nltj Isi Four attachment heads Internal spindle cooling: Yes Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Hjdpein Ub Tofx Ag Iji Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, first registration: 09/2024, For sale: A new refrigerated semi-trailer door (LEFT) from the renowned brand Krone, suitable for trailers with a width of 2.65 m. This is the model with part number 550017381, known for its robust quality and durability – ideal for professional use in the transport industry. Currently, 3 units are available, each offered at a special price of 980 EUR net (plus 19% VAT). Secure a high-quality replacement door for your Krone refrigerated trailer now! Hjdpfx Agoumz Hco Isi

Condition: new, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 150 mm, spindle motor power: 2,200 W, number of spindles: 1, spindle speed (max.): 24,000 rpm, Equipment: rotational speed infinitely variable, CNC4ALL Professional 1200 × 600 💪 Compact Precision CNC Milling Machine – powerful, versatile & in stock! Features (Premium Configuration): 💨 2.2 kW Spindle Motor (water-cooled) – powerful & quiet during continuous operation ⚙️ 9 Nm Stepper Motors (micro-stepping) – precise movements & smooth running 💧 Minimum Quantity Lubrication – extends tool life & reduces maintenance 🌪️ Extraction Hood – clean workspace & clear view while milling 🔄 Rotary Axis D 80 mm × 900 mm – ideal for cylindrical parts, engravings & 3D machining ❄️ Cooling System for Spindle – consistent temperature for long service life 🧲 Vacuum Pump (side channel blower) – secure clamping of small or large workpieces 💻 Control Software Included – Plug-and-Play: connect, start, mill! 📐 Technical Data: * Working area: 1200 × 600 × 150 mm * Accuracy: Positioning ± 0.02 mm | Repeatability ± 0.03 mm * Travel speed: up to 8,000 mm/min * Guide System: Hiwin linear guides, size 20 mm * Drive: TBI ball screws * Machine table: cast iron T-slot/vacuum table combination * Frame: welded steel base, CNC-machined for flatness & stability 🚀 Your Benefits at a Glance: ✅ In stock – ready for immediate delivery & turnkey upon arrival! ✅ Compact design with industrial precision – perfect for workshops & small batch production ✅ High performance for wood, plastic, aluminum & composite materials ✅ Clean, efficient production thanks to extraction hood & minimum quantity lubrication ✅ Flexible thanks to rotary axis & vacuum table – for both flat and round workpieces ✅ User-friendly control – quick setup & easy operation 🪵 Ideal for: Joineries • Model builders • Sign making • Prototyping • Plastics & aluminum processing Hodpjxwdkrofx Ag Iei 📦 Order now! The CNC4ALL Professional 1200 × 600 offers precision, performance, and reliability in a compact format – in stock & ready to use immediately. 👉 Contact us now for your personalized quote or to arrange a demonstration in our showroom.

Condition: new, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 200 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, overall weight: 1,600 kg, coolant supply: 3 bar, number of spindles: 1, rapid traverse Z-axis: 25,000 m/min, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 12,000 rpm, Equipment: rotational speed infinitely variable, 🚀 CNC4ALL Industry 3000 × 1500 CNC Milling Machine/Gantry Milling Machine High-Performance CNC Milling Machine – In stock & ready to use! Premium Features: 💪 5.5 kW spindle motor (water-cooled) – powerful performance for precise machining of wood, plastics, aluminium & composites ⚙️ Servo motors on all axes – high dynamic response, exact repeat accuracy, and smooth running 🧲 Vacuum pump (side channel blower) – optimal workpiece clamping on the vacuum table, even for large-scale materials 🌪️ Extraction hood – keeps the work area clean 💧 Minimum quantity lubrication – extends tool life, reduces coolant consumption, and ensures clean results 🔧 Technical Highlights * Working area: 3000 × 1500 × 200 mm * Repeat accuracy: ± 0.03 mm * Rapid traverse speed: up to 25,000 mm/min * Heavy-duty welded steel frame for maximum stability * HIWIN linear guides and rack-and-pinion/ballscrew drives for precise movements * Control system with user-friendly CNC software (included) ✅ Your Benefits * Available for immediate delivery – no waiting time! * Delivered fully operational – connect, power up, and start milling * Perfect for carpenters, sign makers, and industrial operations * Efficient, quiet, and low-maintenance – ready for professional continuous operation 📞 Get in touch now & secure your quote! The CNC4ALL Industry 3000 × 1500 combines power, precision, and industrial-grade reliability – and is ready for immediate use in your business. Hsdpfoxwc Ipox Ag Iji 👉 Contact us now for an individual quotation or a live demo in our showroom

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,500 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (min.): 3,000 rpm, A CNC portal milling machine FKD-Feichter with double column is available. Travel range X/Y/Z/W: 6000mm/4800mm/1500mm/1300mm, table dimensions X/Y/Z: 6000mm/3000mm, max. workpiece weight: 115,000kg, max. table load: 6,400kg/m², total machine bed length: 14,500mm, portal dimensions X/Y: 3,000mm/4,400mm, C-axis: 360°, A-axis: +/-120°, ram section: 700mm/700mm, feed rate: 10m/min. Total system dimensions X/Y/Z: approx. 15,100mm/6,100mm/7,000mm, total system weight: approx. 115,000kg, control system: Heidenhain. Includes chip guard, coolant system, and hydraulic unit. The machine was built at the site in 2022. The ram and spindle have been freshly overhauled. Documentation is available. On-site inspection is possible. Immediately available. Hodpfx Ajxp Rgkog Iei Three heads: Fork milling head with A-axis, 90-degree angular head, spindle extension – straight head, tool holder SK 50.

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Hjdoryv S Ajpfx Ag Iei Length: 14250 mm, width: 8500 mm, height: 3650 mm Max. hook height: 3280 mm, Max. Overall height: 3950 mm.

Condition: excellent (used), AL-Line 0607 Gantry Milling Machine with CE Marking Precision Collet HF Converter HFU-1500-SSE for Control Cabinet Installation Travel: 650 x 750 x 220 mm Mounting Area: approx. 1000 x 750 mm Clearance Height under Z: approx. 250 mm Guides: 20-series recirculating ball linear guides Ball Screws: 2 external spindles in X X: 16 x 10 mm Y: 16 x 10 mm Z: 16 x 5 mm Weight approx.: 120 kg Year of Manufacture: 2018 Equipment: Reference sensors on all axes Machine base AL0607 for enclosure, fully assembled Aluminum profiles including 19 mm gray chipboard * Compact base frame made of aluminum profile * 4 x 3 Nm 2-phase hybrid servo motors / ES-M22430 AL-Line electric brake module for Z-axis for closed-loop system (prevents the Z-axis from dropping when the control is off) * Leadshine 80V/8A 3-axis closed-loop stepper motor controller in control cabinet * Leadshine 80V/8A closed-loop axis extension for control cabinet * Eding-CNC iCNC600 industrial controller for Eding CNC * Z-Finder inductive PNP tool length sensor with 14 mm probe head * HF spindle set 4545/1 Set consists of spindle, converter, cable, and spindle holder Manual change Speed: 5,000 – max. 60,000 rpm Power: Max. 0.45 kW Housing diameter: 45 mm Housing: Stainless steel Bearings: 2 bearings Hybrid ceramic ball bearings Lifetime grease lubrication Cooling: Labyrinth air cooling via air purge connection Tool change: Manual with union nut Clamping system: ER11 up to max. 8.0 mm Motor protection: PTC sensor Frequency: up to 1,000 Hz Hedpsv Skpzsfx Ag Isi Air purge connection * Enclosure, table-top design, fully assembled 2 hinged doors at the front, 1 door at the side * Top cover * Special safety technology version: Reliable position detection for door release: consisting of safety relay and sensors DN3PS2 standstill monitor without sensor DINA, for 1/3-phase motors Reliable monitoring of spindle standstill for door release * AZM161SK safety switch, closed-circuit principle, 4NC, 2NO, 24V, fail-safe locking

Condition: excellent (used), Year of construction: 2018, operating hours: 1,142 h, functionality: fully functional, machine/vehicle number: 18234, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 28,000 rpm, number of slots in tool magazine: 12, The machine has only processed aluminum and plastic. TECHNICAL DETAILS Travel X: 4,050 mm Travel Y: 2,020 mm Travel Z: 400 mm Table Table size: 4,000 × 2,000 mm Clamping surface: industrial T-slot aluminum profile Max. material width: 2,200 mm Table covering: replaceable PVC protective covering Side channel blower: 2 × 7.5 kW, 520 m³/h Vacuum: 420 mbar at 145 m³/h Gantry & Clearance Gantry clearance height: 375 mm Construction: welded, stress-relieved steel structure Speeds Rapid traverse & feed rate: 417 mm/s Accuracy Repeatability: ± 0.025 mm Mechanical resolution: 0.006 mm Guides & Drives Axis transmission: precision ball screw drives (X 2 × Ø 32 mm) Axis drives: 750 W servomotors on X1, X2, Y, Z Dual drive: X-axis Spindle Model: HSD ES 929 Power: 7.5 kW Speed range: 2,000 – 28,000 rpm Max. torque: 5.6 Nm at 12,000 rpm Tool holder: ISO 30, clamping diameter up to 20 mm Cooling: air/convection (motor ribs) Tool changer Number of positions: 12 Max. tool length: 80 mm Length measurement: automatic Control & Operation CNC: Mecanumeric CN 7000 (ISO G-code) Hedowtcvuepfx Ag Isi Control panel: 15″ touch screen Cooling & Extraction Systems Tool cooling: regulated spray mist Oil mist extraction: integrated Chip/dust extraction: spindle extraction device MACHINE DETAILS Machine dimensions (L × W × H): 5,750 × 2,500 × 2,090 mm Machine weight: 5,000 kg Machine on time: 5,185 h Spindle hours: 1,142 h Power supply: 400 V AC, 50 Hz EQUIPMENT - Heavy-duty flatbed gantry with vacuum-ready aluminum profile table - Two side channel blowers, each 7.5 kW, for powerful vacuum - Swiveling laser pointer for workpiece positioning detection - Automatic tool changer with 12 ISO 30 tool holders and measuring station - Spray mist tool cooling for temperature-sensitive materials - Chip and dust extraction directly at the spindle - Pneumatically retractable positioning pins for quick setup - Safety bumpers and emergency stop buffers for operator protection - High-performance industrial vacuum ASPG 40-100 L for table cleaning - EnRoute BASIC v6 software including thread milling module - CE conformity according to directives 89/336/EEC, 98/37/EC, 73/23/EEC

Year of construction: 2008, condition: excellent (used), ZEISS ACCURA 16.24.10 RDS-CAA Hsdpenp Hvuofx Ag Isi X 1,600 / Y 2,400 / Z 1,000 RDS CAA touch probe with VAST XXT technology Stylus changing system 8 positions Control C99 Software on request - Calypso / HolosNT Warranty 12 months Installation, commissioning, acceptance according to DIN EN ISO 10360-2,4,5

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Table with vacuum plate Hodpfoq Rcu Ejx Ag Iji with BORNEMANN 960 suction unit

Condition: new, These are the original grease cartridges for the LGB 125ml. Machines that need to be replaced regularly to ensure precise lubrication. Hsdpfev Ak Sdsx Ag Ioi The price is for 1 piece. For other spare parts for LGB L.G.B. SCOP, please feel free to contact me as I am the representative.