Used Portal Drill for sale (6,092)

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and Djdjvb Drhopfx Ah Ujkw 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device *

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Dkjdpfsvriq Rox Ah Ujw

Condition: used, Tube End Forming Machine, T-Drill SP-110, Used Machine Manufacturer: T-Drill Model: SP-110 Operation: Uncertain Dkodpfjxu E Duox Ah Uew Overall Dimensions: Width: 930 mm Depth: 1520 mm Height: 1460 mm Weight: 600 kg Year of Manufacture: 2016 Air Pressure: 6 bar Electrical Data: 480V; 18.5 kW; 3x80A The T-DRILL SP-110 is a fully automatic tube end spinning machine capable of closing, reducing, and expanding primarily copper and brass tubes — typical applications include HVAC, refrigeration, and mechanical fittings. Technical Data (Summary): Tube diameter range: Ø 8 – 108 mm (≈ 5/16” – 4-1/8” O.D.) – T-Drill Oy Maximum reduction: 70% – T-Drill Oy Materials: primarily copper and brass (as highlighted in the manufacturer’s description) – T-Drill Oy Wall thickness / maximum wall thickness (according to used machine listings): e.g., one listing indicates 0.125" (≈3.2 mm) maximum wall thickness (depends on model/configuration) – Southern Fab Sales Machine features: automatic clamping, rotation + forming tools (tooling/dies), suitable for forming long or complex tube ends. Capable of closing, flattening, reducing, and expanding tube end geometries; the manufacturer’s brochure contains detailed shapes and examples. Especially suitable for HVAC and industrial refrigeration tubes.

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online Dksdpfxsi Hqhfj Ah Ujw lignum 602 Show number

Condition: refurbished (used), PORTAL STRAIGHTENING PRESS PRESSURE 450t Dedpefcnu Isfx Ah Uekw WORKING AREA LONG: 5200mm WIDTH: 2300mm HEIGHT: 1000mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² Dkedpfx Ahexr U Dro Ujw MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Dkjdpertrztofx Ah Uew Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM Dedpfxstnh Alo Ah Ujkw ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Spesifikasjoner:  Dodpfx Aoxu A N Ush Ujkw 1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: new, mount diameter: 50 mm, clearance between the columns: 375 mm, spindle mount: MK 4, total height: 2,450 mm, total width: 1,020 mm, total length: 610 mm, table width: 600 mm, table length: 600 mm, overall weight: 820 kg, quill stroke: 230 mm, Column Drill Maximum drilling capacity Ø 50 mm Spindle holder MK 4 Spindle speed min. 54 rpm Spindle speed max. 2.090 rpm Stroke of the drill pinole 230 mm Distance column to drilling center line 375 mm Dsdpfjxu H Eyex Ah Ujkw Drilling table size 600 x 600 mm Length 610 mm Depth 1020 mm Height 2450 mm Weight 820 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 1994, Control: Heidenhain TNC 415 Travel paths: X=2000, Y=2000, Z=1250 mm B axis: 360° Table size: 1600 x 1800 mm Djdpfxexvb Ixo Ah Uokw Max. workpiece weight: 12,000 kg Work spindle: 130 mm Taper: SK 50 Tool changer: 60 stations Hollow spindle flange Ø: 221.44 mm Max. centring cone Ø: 180 mm Spindle extension: 800 mm Speed: 400 – 1600 rpm Feed: up to 8000 mm/min Table rotation B axis: 1.5 rpm Weight: approx. 32,000 kg Operator platform, electrically height-adjustable approx. 1200 mm, Chip conveyor

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional extraction 6,000 x 3,000 mm 'Plasma Rotator MasterCut' with fully automated support ACTG automatic calibration unit for the beveling system Kemper Extraction System 8000 (year 10/2015) Asper Basic 2D programming software Dkjdpjxu U Ddofx Ah Usw + Asper BevelCut bevel cutting programming Other technical specifications: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical sensing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover for cutting table Reinforced design of cutting table Interface for fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on the gantry bridge with emergency stop Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 71125

Condition: new, We are selling various Hilti concrete drill bits from our remaining stock. Dkjdpfxjxt Uflj Ah Uow

Condition: good (used), Spindle diameter: 75 mm Machine weight approx. 6500 kg Dedpfxjxtu D Uj Ah Uokw Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2019, condition: used, New: No Field of application: Construction Serial number: TMG19SEDO186/8992 011xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18688 Specifications: 2019 model Engine hours: approx. 5,100 Hammer hours: approx. 1,700 Power: 116 kW Weight: 10,500 kg Undercarriage (see pictures) Machine width: approx. 230 cm Winch Undercarriage replaced in 2024 Dksdsxivxlopfx Ah Usw L5 GPS system Grinder Hammer serviced by Epiroc Description:2019 Epiroc T30R drill rig equipped with L5 GPS system.Undercarriage was replaced in 2024.Hammer service performed by Epiroc, engine serviced in-house every 250 hours.Available for prompt delivery. Own weight: 10500 Total Weight: 10500 Width: 230 Kw: 116 Hammer hours: 1620 Engine hours: 4890 Model: FlexiRoc

Condition: new, mount diameter: 40 mm, clearance between the columns: 350 mm, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 50 rpm, Column Drill Maximum drilling capacity Ø 40 mm Spindle holder MK 4 Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Dsdpsxu Hp Ejfx Ah Uekw Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: reconditioned (used), Year of construction: 1980, Rapid radial drilling machine DONAU DR 23 Year of manufacture: 1980 Speed range: 70 rpm – 1550 rpm Arm reach: 920 mm Drilling capacity in steel: 30 mm Thread cutting device Mechanical feed Clamping table surface: 1050 mm x 400 mm Spindle taper: Morse taper 3 Machine lamp Coolant device Rotary table Ø 250 mm with index plates Dedpfx Asxuh Rkeh Uokw Machine vice 160 mm 5 height-adjustable machine shoes Various tools

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (bevel unit) with oxy-fuel torch Manufacturer: Zinser Model: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Track length: 11 m Burning table with oscillating conveyor system, including extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console incl. automatically rotating plasma bevel unit Bevel System 2015/350 1 oxy-fuel torch Filter system Downflow 3DFP9-SP Dkjdpfx Ahsw Rpvbs Usw Power: 9 kW Laser diode 31125ä

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Dkjdpfxow Tc Hfe Ah Uew Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. Dkodpfx Ajxr Tx Uoh Uew The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: new, spindle mount: MK 4, total height: 2,220 mm, total width: 930 mm, total length: 560 mm, table width: 560 mm, table length: 560 mm, overall weight: 465 kg, quill stroke: 180 mm, drilling capacity: 40 mm, Equipment: type plate available, Maximum drilling capacity Ø 40 mm Spindle holder MK-4 Dsdpfx Aoxu Hnuoh Ujkw Spindle speed min. 50 rpm Spindle speed max. 1.450 rpm Stroke of the drill pinole 180 mm Distance column to drilling center line 350 mm Drilling table size 560 x 560 mm Length 560 mm Depth 930 mm Height 2220 mm Weight 465 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2017, Serial number: tmg17sed0500/8992 xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours 168kW 17200kg Leica GPS 2560 hammer Rod shifter Carousel Dkodpfoxr Txzex Ah Uow Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery     Description: We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Dsdpfx Aexr Txnsh Uekw Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco Flexiroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Model: Flexiroc T40-11 borerigg m/2540 hammer,CME sliper og gps

Condition: used, mileage: 150,000 km, Year of construction: 2019, Serial number: YS2P6X2000556xxxx Please contact ATS Norway for more information Dksdpfx Ahsxr Tw Dj Ujw Please provide reference number upon request: 21679 Specifications: EU approved until 21.11.2025 Model year: 2019 Mileage: approx. 150,000 km Opticruise Tires (see pictures) 2019 Joab body Remote control for body Autoline C50 sand spreaders Fuel type: Gas Euro 6 Length: 874 cm Width: 255 cm Wheelbase: 435/135 cm Curb weight: 14,200 kg Max payload: 13,725 kg 6x2 340 hp Rear-view camera LED bar Bed Radio/CD Climate control/AC Description:Scania P340 6x2 skip loader from 2019.Equipped with Joab body with space for two containers.Regularly serviced.Delivery by agreement.See video! Km: 150000 HK: 340 Technical approved: Yes EU-approved until: 21.11.2025 Own weight: 14200 Total Weight: 28000 Payload: 13725 Width: 255 Length: 874,2 Euro: 6 Model: P340 6x2 Liftdumper m/ Joab påbygg SE VIDEO Gearbox: Automatic

Condition: used, mileage: 187,000 km, Year of construction: 2019, Serial number: YV2XZ22C9KA83xxxx Please contact ATS Norway for more information Dkedpfx Aexq Dh Djh Uew Please provide reference number upon request: 21577 Specifications: 2019 model Approx. 187,000 km EU-approved until 15.10.2026 Euro 6 Wheelbase: 390/137 cm 419 hp Rotator Extendable boom Full air suspension 2018 Laxo bodywork 6x2 Tires (see pictures) Extra lights Bed AC / climate control Radio / DAB Ready for delivery Description:2019 Volvo FM 410 skip loader 6x2 with Laxo body, extendable boom and rotator.The truck can carry two containers.Video available on request.Delivery by arrangement. Km: 187000 HK: 419 Technical approved: Yes EU-approved until: 15.10.2026 Own weight: 13000 Total Weight: 27000 Payload: 13925 Width: 255 Length: 822,2 Euro: 6 Model: FM 410 liftdumper 6x2 m/ Laxo påbygg, utskyt og rotator.