Used Portal Drill for sale (6,142)

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes Iedpfsxxvp Njx Aaastp + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: Isdew Tc Hfspfx Aaajtp The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: reconditioned (used), Year of construction: 1980, Rapid radial drilling machine DONAU DR 23 Year of manufacture: 1980 Speed range: 70 rpm – 1550 rpm Arm reach: 920 mm Drilling capacity in steel: 30 mm Thread cutting device Mechanical feed Clamping table surface: 1050 mm x 400 mm Spindle taper: Morse taper 3 Machine lamp Itsdpfxoxuh Rks Aaaop Coolant device Rotary table Ø 250 mm with index plates Machine vice 160 mm 5 height-adjustable machine shoes Various tools

Condition: used, mileage: 347,607 km, power: 285 kW (387.49 HP), first registration: 09/2012, fuel type: diesel, color: green, axle configuration: 6x2, tire size: 385/65 R22.5, fuel: diesel, wheelbase: 4,600 mm, brakes: engine braking, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: trailer coupling, = Additional options and accessories = - Beacon(s) - Drivers seat comfort 5 - Electric windows - Enhanced engine brake - Flashing lights - Gullet - Heated exterior mirrors - Power side-view mirror - Preparation OBU - Sun visor = Remarks = Structure Construction year: 2012 = More information = Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Drivetrain Engine type: Volvo I SHIFT Transmission Transmission: 12 gears, Automatic Axle configuration Front axle: Tyre size: 385/65 R22.5; Max. axle load: 8000 kg; Tyre profile left: 65%; Tyre profile right: 65% Rear axle 1: Tyre size: 315/80/22.5; Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 55%; Tyre profile right: 55%; Suspension: air suspension Rear axle 2: Tyre size: 315/80/22.5; Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75%; Suspension: air suspension Measures Dimensions (LxW): 750 x 255 cm Weights Empty weight: 12.501 kg Carrying capacity: 14.599 kg GVW: 27.000 kg Max. towing weight: 50.000 kg Functional Iodpew R Dr Dofx Aaaetp Make of bodywork: GERGEN 18 TON Extendable superstructure: Yes Interior Number of seats: 2 Maintenance APK (MOT): tested until 02/2026 Identification Registration number: 99-BRF-2 Serial number: YV2JG00C4CB625283

Condition: used, mileage: 176,927 km, power: 243 kW (330.39 HP), first registration: 01/2021, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 315/70R22.5, fuel: diesel, wheelbase: 3,700 mm, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 3,750 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, differential lock, traction control, = Additional Options and Equipment = - AdBlue system - Differential lock - Electric windows - Remote central locking - Air suspension Iedpsxwwczjfx Aaaotp - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Toolbox = Remarks = JOAB VL8 AA C 8,000 kg capacity. = Further Information = Technical Information Number of cylinders: 6 Driveline AdBlue system: Yes Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steering; Tire tread left: 75%; Tire tread right: 75% Rear axle: Dual tires; Inner left tire tread: 75%; Outer left tire tread: 75%; Inner right tire tread: 75%; Outer right tire tread: 75% Dimensions Dimensions (L x W): 6252 x 252 cm Weights Unladen weight: 9,550 kg Payload: 9,950 kg Gross vehicle weight (GVW): 19,500 kg Identification Type number: FM 330 / SKIP LOADER / HOOKLIFT = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: good (used), Year of construction: 1990, Spare Parts Package for CNC Boring Mill Manufacturer: PFEIFER, Model: FK 105 CNC, Spindle Mount ISO 50, Year: 1990. 1. Complete ISO 50 Spindle Head 4. Ball screws with nuts for X-Y-Z-W axes. Itodoxr Dg Nopfx Aaaop

Year of construction: 1997, condition: ready for operation (used), With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers. Itsdjl Tn Epspfx Aaajp

Condition: excellent (used), Year of construction: 2021, Maggi Boring System 29 Multi-Spindle Drilling Machine Number of spindles: 29 Speed: 2800 rpm Distance between first and last drill: 896 mm Noise level: 76.1 dB Number of pneumatic clamps: 2 Center distance between spindles: 32 mm Max drilling depth: 65 mm Ijdpsxvctvsfx Aaaotp Air consumption: 10 l/cycle Weight: 370 kg Working pressure: 6–7 bar Motor power: 1.5 kW Max workpiece thickness: 70 mm Spiral System – device for rapid drilling depth adjustment CE certified Year of manufacture: 2021

Condition: new, Year of construction: 2024, functionality: fully functional, - Single-head drilling machine for drilling from 0 – 90 ° - Pneumatically adjustable head angle - Cast iron spindles - High-speed spindles - Pneumatic material clamps - Cast iron worktable - Quick and precise setup - Accurate drilling STANDARD MACHINE EQUIPMENT: - 2 aluminium rulers, each 1.5 m long (right and left) with two stops - 5 quick-release drill chucks Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic presses: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Isdpfx Aoxwcbceaajtp Max workpiece thickness: 70 mm Working pressure: 6 – 7 bar Rotation speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm Pickup: Almelo, Netherlands Mobile: +31634707163

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Itjdpfx Aasudl Ansaep Drive: PRYM Getriebebau geared motor, 50/60 Hz Stable cast iron construction Adjustable work table Complete machine, ready for operation Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation.

Condition: new, Year of construction: 2025, machine/vehicle number: PRJ068617, ALZMETALL Bench Drill Machine Drilling capacity in steel 14mm Short taper spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-table distance min. / max. 75/357mm, machine table height adjustment by hand crank, machine base plate, usable surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle-base plate distance min. / max. 437/437mm, manual feed, machine height without options: 825mm, net weight: 83 kg. - Stepless speed adjustment 230–4000 rpm Iedpelub Htofx Aaaetp Standard equipment: 5" TFT LCD display with touch function: manual input for target spindle speed, actual speed indicator, integrated drilling depth display with touch zero reset, virtual drilling depth scale on display, machine status and warning messages on display, service information, selectable operating languages DE/EN/FR/ES/IT/NL/RU Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, three separate pushbuttons for forward - reverse - stop, spindle lock with brake function, spindle guard with electrical interlock, lockable main switch, mushroom-head emergency-stop button (latching), stepless speed adjustment via potentiometer, protection class IP54, spindle guard with electrical interlock, finish: DD-structured paint signal white RAL 9003, PANTONE 7545c, black Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 1980, table length 550 mm table width 550 mm table swivelabel +/- 90 ° no. of flutes 4 weight of the machine ca. 600 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Itjdpfsgvi I Aox Aaajp +++++

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine Itedpfeu Shx Dsx Aaaep - 4 drilling units top - 4 drilling units rear - Right and left

Condition: like new (used), functionality: fully functional, drilling capacity: 25 mm, Radial Drill Mecof 25 Pr Itjdpfjxf Hu Aex Aaajp 770 X 25 Drilling Ø 25 Mm.-Arm 770 Mm. Spindle Power 2.5 Hp. Spindle Rotation Speed N. 12; 38 - 1,400 Rpm. Spindle Cone: Cm 4- Ø Spindle 74 Mm. Spindle Stroke 250 Mm.- Max. Working Height 1,110 Mm. Ø Column 200 Mm. Total Weight 1,300 Kg. Complete With: Cube 450 X 320 X 400 Mm. Internal Code: svr 324

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 22000157, overall weight: 63 kg, Description For machining PVC and aluminium profiles, particularly suitable for the production of window and door frames Type: Stationary screwdriver / screw feeding unit Application area: Reinforcement screwdriving in plastic profiles Iedpfx Aexxy R Deaaotp Year of manufacture: 04/2004 Functions: Automatic screw feeding Feeding unit with automatic depth stop Foot switch activation for ergonomic operation Integrated pneumatic control for compact design Stainless steel hopper for long service life

Condition: excellent (used), I sell a HANG 106DTK paper drill, operational in good condition. There are several Hang drills on offer. Itsdpfx Aaeudpc Sjajp

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 5,150 mm, The machine is in good technical condition, connected to power and can be tested. Isdpfoxxtbcsx Aaajtp

Condition: used, Brand: Ibarmia-1B-35 Iedpjxqmvkofx Aaastp Description: Dividing head bell, 2 stations

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 24,000 rpm, table load: 15,000 kg, Submitting a bid obliges the buyer to collect the machine by the deadline of 27.11.2025! The machine can still be inspected under power until week 47. The new spindle was installed in 2025! Additionally, the tool changer was retrofitted in 2025. The CNC control was upgraded in 2014! TECHNICAL DETAILS Working Areas X-axis: 6,000 mm Itsdpfx Aexr U Drsaajp Y-axis: 2,700 mm Z-axis: 1,250 mm Clamping Table Table dimensions (L x W x H): 6,600 x 2,740 x 520 mm Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle power: 10 kW Spindle speed: 24,000 rpm Tool holder: HSK 63F Tool clamping: pneumatic Torque: 8.7 (S1) and 10.5 (S6) Nm Suitable materials: wood, plastic, aluminium Linear Axis Drives Feed rate X, Y, Z axes: max. 20 m/min Axis acceleration: max. 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with electronic handwheel Connection Data Power requirement: 28 kW Main fuse: 63 A Dimensions & Weight Required floor space: 10,000 x 5,000 x 4,500 mm Total weight: 28,000 kg EQUIPMENT Double-sided enclosure with two doors 6-position tool changer

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Itodpfx Aasgq I I Eeajp Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 250 mm, For sale is a used, but like-new SK0805 gantry milling machine. The machine has been regularly serviced at all times and is in excellent visual and technical condition. It is fully functional, tested, and ready for immediate operation. Our service commitment: For us, quality, expertise, and customer satisfaction are top priorities. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you at any time, even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee. Itsdpfx Aaexwau Hoaep

Condition: excellent (used), Year of construction: 1985, machine/vehicle number: 46078-02/9, A well-preserved table-type boring mill WMW UNION type: BFT 80/3-1, machine no.: 46078-02/9, year of manufacture: 1985, with vertical milling head. Spindle diameter: 80 mm. Isdpfx Aoxw H Adoaajtp

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Isdpfx Aek Iuqyoaajtp Spindle speed ----- 220-2840 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 60 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: new, Motor ----- 550W - 230V - 1Phase Drilling capacity ----- 16 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Worktable ----- 290 x 290 mm Foot ----- 420 x 250 mm Column diameter ----- 72 mm Overall height ----- 980 mm Weight ----- 47 kg Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination Iodpjk Iuzijfx Aaaetp * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: new, Gear driven column drill 400V-3Phase Max. drilling capacity Cast iron / Steel --- 40 / 35 mm Max. tapping capacity Cast iron / Steel --- 24 / 22 mm Spindle adaptor --- MK4 Spindle stroke --- 120 mm Spindle speed --- (12) 75~3200 rpm Automatic spindle feed --- 0.10/0.18/0.26 mm/omw Column diameter --- 125 mm Unloading --- 320 mm Distance from spindle nose to table --- 85~665 mm Distance from spindle nose to base --- 1140 mm Drilling table --- 500 x 380 mm T-slot --- 14 mm Ijdpok H Ig Rofx Aaajtp Foot --- 470 x 670 mm Motor --- 1.5 kW Machine dimension --- 470 x 710 x 2000 mm Weight --- 470 kg