Used Portal Drill for sale (6,040)

Condition: used, There are five Friedrich Deckel FP 1 machines available. An on-site inspection is possible. Gbodsz H Utaopfx Al Usu

Condition: excellent (used), Catalog number: 8071 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Spindle spacing: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 900x350 mm - Height to table surface: 900 mm Gbedpfx Alezuk Aij Uju - Stroke of the feed cylinder (drilling depth adjustment): 50 mm - Drilling speed: pneumatically adjustable - Drilling angle: manually adjustable - Main motor: 1.5 kW - Side fences: 400 mm - Compressed air requirement: 6-8 bar - Diameter of the dust extraction nozzle: 60 mm - Dimensions (L/W/H): 1000x860x1270 mm - Weight: 267 kg ADVANTAGES - Made in Italy - For 21 spindles – drill mounting with quick-release couplings - Vertical, horizontal, and angled drilling - Unpainted - Used drill press, very good condition Net price: 6900 PLN Net price: 1600 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen Gbjdpfxst U Scwe Al Usu column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: used, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch Gbedpfx Ajt U Sc Djl Ueu - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: used, bore capacity in steel (diameter) 13 mm throat 180 mm bore stroke 70 mm Godpfx Aewpltuel Uebu morse taper 3 MK table: 215 x 215 mm turning speeds 240 - 4000 U/min engine output 0,7 kW column diameter 65 mm dimensions 650 x 250 x 800 mm weight 50 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm Gjdpfoprfbuex Al Usbu turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 13,0 mm x-travel 300 mm y-travel 130 mm turning speeds 100 - 2500 U/min throat 165 mm spindle taper MT 3 MK Gjdpfx Ajxabb Hsl Usbu table-size 490 x 120 mm diameter of hob 30,0 mm motor 230 Volt total power requirement 0,75 kW weight of the machine ca. 50 kg. dimensions of the machine ca. 520x500x740 mm Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - tightening spindle M 12 - Height-adjustable protective cover - operating key

Condition: new, bore capacity in steel (diameter) 55.0 mm threading M 30 / M 42 throat 300 mm bore stroke 140 mm turning speeds 70 - 1200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.10 + 0.30 mm/U distance spindle /table 150 / 735 mm weight 380 kg Machine height 1850 mm Furnishing : - automatic feed - Feed device 0.1 + 0.3 mm / rev - stepless speed adjustment - digital speed display - Feed overload protection - Spindle protection with electr. validation including special equipment: Gsdpfxsxaa E Re Al Uobu - Coolant device mounted in the foot pos. 24. - Thread cutting device pos. 20.0 (Thread cutting with stop) - LED machine light pos. 12.

Condition: new, Year of construction: 2026, bore capacity in steel (diameter) 32.0 mm 35.0 mm bore stroke 150 mm M 22 (St 60) throat 300 mm 0.1 - 0.2 mm/U MK 4 480 x 480 mm 80.0 - 1.170 U/min 0.90 / 1.35 kW 340 kg 800 x 1000 x 2000 mm Manufacturer's list price: 8.665 EURO Special price on request Equipment: - Column drilling machine - "V-belt drive" - infinitely variable speed adjustment - Manual automatic spindle feed - Thread cutting device * automatic feed reversal RS for thread cutting - pole-changing drive motor - depth scale and adjustable depth stop - Height-adjustable work table * Adjustment with hand crank Gbedpfx Aljx Dngko Uju - Right/left rotation of the drill spindle - Machined machine base incl. coolant device - Machine/work light - Folding drill spindle guard - Emergency stop button at the front - CE marking + instruction manual

Condition: used, Boring power 32.0 mm bore capacity in cast iron 35.0 mm morse taper MK 3 spindle stroke 120 mm throat 260 mm column diameter 110 mm table: 515 x 355 mm turning speeds 80 - 1400 U/min total power requirement 0.7 / 1.3 kW weight 175 kg Gjdpfsxabp Rex Al Uobu range L-W-H 750 x 520 x 1820 mm from a training workshop maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug * Machine link: ?machineno=1008-9103754

Condition: good (used), Year of construction: 2000, bore capacity in steel (diameter) 32.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 160 mm 4 speeds 65 - 2000 U/min Gjdozzrfxepfx Al Ujbu column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm Current list price: approx. 18.000 euros Special price available upon request Features: - Robust column drill press (V-belt drive) - Electromagnetic feed clutch = spindle feed * with overload protection and electric cross-handle control - mushroom-head pushbutton (latching) for EMERGENCY STOP * located on the front panel - continuously variable speed control - clockwise rotation of the drill spindle - Pole-reversible drive motor - Infinitely adjustable drilling depth stop - Work table with 2 T-slot - height-adjustable - Separate coolant system, with reservoir - Operating instructions in German

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC Gbsdpfx Aleibq Ite Uou drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: good (used), Nagel Citoborma 290AB Paper Drill The machine is 100% functional and ready to use. Robust construction – weighs 200 kg. This is the current Citoborma drill model in production. 400V power supply. Two drilling heads with adjustable spacing ranging from 45-170 mm. Drill diameter: 2-20 mm. Stack height: 60 mm. Gbedpfxoz Dtags Al Ueu Controlled by an electric foot pedal. Waste is directed to an external sleeve. The drill table is adjustable in every direction (sides, front/back) and has stops for setting the drill spacing (non-standard drilling). Additionally, a special module for standard spacings is installed in the table. Furthermore, the table has two movable margins. The drill has an automatically released table lock after each cycle, allowing the table to be moved to the next position. The set includes drills, tools and instructions.

Condition: new, bore capacity in steel (diameter) 25 mm throat 175 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 380 mm 175 mm table surface area 700 x 180 mm connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm total power requirement 0,75 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Gedpoupxtfefx Al Uobu spindle protection. incl. tool box with various tools

Condition: new, bore capacity in steel (diameter) 30 mm throat 200 mm bore stroke 70 mm 16 mm spindle taper MK3 spindle turning speed range 50 - 3000 U/min 565 mm 220 mm table surface area 840 x 210 mm connected load frequency 400 V max. distance between table and spindle-nose max. 470 mm total power requirement 1,1 kW weight of the machine ca. 230 Kg dimensions of the machine ca. 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Gjdpfxeupxt Ee Al Ujbu Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand otional ( 199 Euro) incl. tool box with various tools

Condition: new, bore capacity in steel (diameter) 20 mm throat 195 mm Gbjdpfeiiq S Nox Al Ueu bore stroke 80 mm boring spindle MK 2 table surface area 320 x 300 mm total power requirement 0,75 kW weight of the machine ca. 0,072 t dimensions of the machine ca. 0,7 x 0,4 x 1,1 m

Condition: new, Boring power 35 mm turning speeds max. 810 U/min core drilling diameter max. 35 mm tool taper Weldon 19,05 mm bore stroke 210 mm weight 11 kg connected load frequency 230 V engine output 1,6 kW Dimensions (LxWxH) 0,4 x 0,25 x 0,275 m Magnetic drill with: 2-speed motor. Gbjdpfxoidabvo Al Uju Coolant system. Robust mobile storage / carrying bag. MAGNET HOLDING FORCE 1800 kg

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Gbsdpfx Asfg U Thel Uou Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting Gedpfxjfg U Tis Al Usbu - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 Gsdpefg U Tnsfx Al Uebu throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Gedpfxopam Hre Al Uebu Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 40 mm throat 330 mm bore stroke 190 mm spindle taper MT 4 MK table: 500 x 400 mm column diameter 140 mm Gbjdpfx Aeqwd A Aol Ueu turning speeds 90 - 1500 U/min total power requirement 2,2 kW weight of the machine ca. 435 kg. range L-W-H 570 x 930 x 2170 mm

Condition: ready for operation (used), functionality: fully functional, ARBOGA UM 3008 / Drilling and Milling Machine -Spindle speeds / 8 stages / 105 - 3020 rpm -Gear / Gear head / Swiveling and tilting -Tool holder MK 3 -Drilling capacity / Steel max. 30mm -Drilling depth / Quill stroke approx. 130mm Gbodpfxez Hy Hro Al Usu -Max. distance - Spindle / Table approx. 600mm -Cross table 585x245mm, adjustable via crank Dimensions: L x W x H 0.9 x 0.8 x 1.9 meters / Weight approx. 600 kg Errors and omissions excepted.

Condition: used, Machine was regularly serviced, was in operation until recently, with documentation and accessories, an on-site inspection is possible. Gedpfxoz Ibyco Al Ujbu

Condition: new, Year of construction: 2026, CORMAK WS20 Bench Drill Press The CORMAK WS20 Bench Drill Press is a professional column drilling machine for metal, designed for drilling and tapping operations in industrial environments. Thanks to its robust construction, large spindle travel, and automatic tapping function, the machine delivers excellent performance and precision in metalworking applications, particularly when machining structural steel. Gbedpfxjrif Tro Al Uju Main Advantages of the Machine - Tapping function with automatic reversal to counterclockwise rotation – enables fast and safe thread tapping up to M16 in steel. - High structural rigidity – an 85 mm diameter column and seasoned cast iron components, including the drill head, base, and worktable, ensure stability and effective vibration damping. - 135 mm spindle travel – allows deep-hole drilling without the need to reposition the workpiece. - Belt drive system – provides five precisely selected spindle speeds ranging from 280 to 1875 rpm. - Safety guards with limit switches – CE compliance and enhanced operator safety. - Large worktable with 360° rotation and mounting slots – provides flexibility when clamping and positioning workpieces. Construction and Technology The CORMAK WS20 Bench Drill Press for Metal features a robust construction made from high-quality materials. The spindle and transmission shafts are manufactured from hardened steel, ensuring excellent resistance to wear. The drill head, column, and worktable are made from precisely machined, seasoned cast iron components, providing high rigidity throughout the entire structure. The MT2 Morse taper enables quick tool changes and allows the use of various cutting tools. Precision and Operating Efficiency Thanks to its stable column, large spindle travel, and carefully engineered transmission system, the machine ensures precise and repeatable drilling and tapping operations. The clear and easy-to-use control panel simplifies machine operation, while the powerful 1.1 kW motor provides efficient performance, even when machining difficult-to-cut materials. Applications The CORMAK WS20 Column Drill Press is ideally suited for use in: - Industrial manufacturing facilities. - Mechanical workshops. - Maintenance departments. - Technical schools and training centers. The machine is designed for drilling and tapping operations in steel, aluminum, and non-ferrous materials. Standard Equipment - Keyed drill chuck - Morse taper drift for tool removal - U-shaped spindle guard with safety limit switch - Belt drive guard with safety limit switch Technical Specifications Maximum drilling diameter (steel) 20 mm Maximum tapping size (steel) M16 Spindle travel 135 mm Spindle taper MT2 Spindle speed range 280–1875 rpm Number of spindle speeds 5 Column diameter 85 mm Column wall thickness 12.7 mm Spindle-to-column distance 260 mm Spindle-to-table distance 366 mm Spindle-to-base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm