Used Portal Drill for sale (6,006)

Condition: excellent (used), machine/vehicle number: 6710, drilling for concealed hinge installation laser Crodpfxsz D Ai Rs Acpeh pneumatic clamps drilling diameter of the central spindle: 0-70mm maximum drilling diameter: 45 mm pneumatic head movement mechanism for installing concealed hinges rotary head for three spindles in a line 230 V 1.1 KW year of manufacture: 2012

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Well, selling due to no usage. Codpfsz Ellwsx Acpsrh

Condition: good (used), 1 x Bench drill with threading attachment. Solid TB 13 in good technical condition. Technical data: Chuck: BT 16 Speeds: 200 - 3200 rpm Table clamping surface: 260 x 330 mm Crjdpfxswyw Ape Acpsh Accessories: 1 x Röhm drill chuck 1 - 13 mm with key 1 x Threading chuck The machine can be inspected while powered on.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Cjdpfx Aeh Ek H Secpsrh Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm Csdpfx Ajzyb Srecporh · weight 1,900 kg · spindle speed 700–2,800 rpm · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm · float glass EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.

Condition: used, Year of construction: 2005, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track width: 8,000 mm Crodoykruaepfx Acpjh Equipment: 1 x Oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x Skew rotator with Kjellberg FineFocus 800 power source 3 x Oxy-fuel torches ALFA 1 x Marking unit FineMarker Without table, filter, and guide rail 28926ä

Condition: good (used), functionality: fully functional, Stroke: 40 mm, swiveling table, threading capability, spindle speeds from 60 - 1600 rpm, coolant. Cjdpfx Aez E H Tvocporh

Condition: used, Floor plate area: 4000 x 4000 mm E20 table: 2000 x 2000 mm Load capacity: 20 tons Travel: X=4000, Z=2500, Y=1600 mm Csdpfx Acez Ahauopsrh Weight: 75 tons

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, The authorized SUBARU dealer in Łaziska Górne has a 2012 Vermeer D9x13 Series 2 horizontal directional drilling rig for sale, with 5650 operating hours. We specialize in importing and selling Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. We offer all forms of payment: Leasing, credit, cash, and bank transfer. With cash or bank transfer payment, you can drive the machine away from the showroom immediately. In addition, we handle insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. For more information about our services, please contact our sales representatives. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 hp / 35 kW Push/pull force: 40 kN / 9000 lbs Cjdpfx Aozumt Rscperh Maximum torque: 1763 Nm Spindle rotation speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid tank/mixer from 2021, which is a perfect match for this model and constitutes a practical set for carrying out small and medium-sized directional drilling projects. Ditch Witch FT5 – basic data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 hp Dimensions: approximately 185 × 81 × 136 cm Curb weight: approximately 182 kg It is possible to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid tank. The stated price is net and applies to export and to companies. A significant discount is available for individual customers – Please contact us directly by phone to get your best price.

Condition: ready for operation (used), functionality: fully functional, Union table drilling machine BFT 105 Heidenhain TNC 155 Cjdjz Ei Ucopfx Acporh Year of manufacture: 1988 Table load capacity: approx. 4 tons 24 kW spindle: diameter 105 / SK 50 / S2000 Travel distances: 1750 x 1100 x 800

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR Crsdpfx Aozr I H Tscpeh (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Csdpezr D Dnefx Acpsrh

Condition: used, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 380 V, input frequency: 50 Hz, spindle mount: MK 2, actuation type: electric, overall weight: 150 kg, quill stroke: 120 mm, Equipment: type plate available, Gillardon pillar drilling machine Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached nameplate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH, D Zwickau Cjdpeh N Svlofx Acporh 3 speed ranges via belt drive. Spindle stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 rpm, MK2 drilling column. Power consumption 0.75 kW - mains connection 380 volts, 50 Hz. Good used condition Nameplate present An inspection of the bench drill while it is powered is possible after prior appointment. Price: negotiable Our asking price is €290,-- net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 230 mm, travel distance Y-axis: 150 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 320 rpm, spindle mount: MK 2, throat depth: 182 mm, quill stroke: 80 mm, type of input current: three-phase, total length: 650 mm, total height: 900 mm, table width: 152 mm, input voltage: 400 V, total width: 580 mm, table length: 420 mm, drilling capacity: 16 mm, Equipment: documentation/manual, NEW MTP ZX7016 400V DRO drill-milling machine "Zośka" with digital depth readout + vice – 400 V – 12 months warranty on parts – delivery to any destination in Europe The Metal Technics Polska ZX7016 is a compact 2-in-1 drill-milling machine for drilling and light milling in metal. Compact dimensions, simple operation and a solid construction make it ideal for workshops, garages, service departments and hobby metalworking. A true classic, known for its excellent value for money. Credpez Hz U Rofx Acpoh This version adds a digital depth readout panel with zero-reset function: it shows the vertical travel of the tool in millimetres, so you can set a reference point, reset to zero and drill or mill to an exact depth – and repeat settings easily, without guessing. TECHNICAL DATA • Spindle taper: MT2 • Max. drilling diameter: 16 mm • Max. face milling diameter: 40 mm • Max. end milling diameter: 10 mm • Spindle speeds: 320–3300 rpm (12 speeds) • Spindle stroke: 80 mm • Table size: 420 x 152 mm • Table travel: 230 x 150 mm • Spindle to column: 182 mm • Spindle to table: 360 mm • Dimensions with base: 650 x 580 x 900 mm • Weight: 75 kg • Motor: 550 W • Voltage: 400 V / 50 Hz, three-phase STANDARD EQUIPMENT • Cross table with handwheels • Machine vice • Digital depth readout panel with zero reset • Drill chuck with chuck guard • 12-speed belt drive WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 415 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification • Model: ZX7045B VARIO • Max drilling capacity: 45 mm • Max face milling diameter: 80 mm • Max vertical milling diameter: 32 mm • Max tapping capacity: M12 • Spindle taper: MT4 • Spindle travel: 130 mm • Spindle speed: 100 – 3200 rpm • Speed control: variable Crsdsyvh Hqspfx Acpjh • Max distance spindle–table: 450 mm • Distance spindle axis–column: 286 mm • Table travel X: 580 mm • Table travel Y: 200 mm • Table size: 800 × 240 mm • Head: tilting ±45° • Motor power: 2.2 kW • Power supply: 400 V • Machine dimensions: 860 × 740 × 1200 mm • Weight: 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine Credpeyrhppsfx Acpsh • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 6939.26 € 133.93 € 20 mm MK 2 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 100 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front Crsdpfx Aey Hf N Recpeh LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu Codpfxsy Hf Ruj Acpjrh ca. 2 - 4 Wochen ab Auftr Deutschland 7519.51 € 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 7160 € 138.19 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm 100 mm Codpewiq N Uofx Acpsrh 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB)

Condition: new, neu ca. 6-8 Wochen ab Auftrag Spanien 8970 € 173.12 € 30 mm MK 3 250 mm 65 - 3.060 (8) U/min 380 mm 600 mm 2060 mm Crodjwva Hpspfx Acpsh 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS

Condition: new, Year of construction: 2025, neu 2025 Credpoxcg Ecsfx Acpjh 030161 prompt, Zwischenverkauf v Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Year of construction: 1990, condition: used, Controls: Heidenhain 3-axis digital readout, without clamping systems, tools and large table, with small table, machine makes noticeable operating noises, an on-site inspection is possible. Credpfsz Ea R Iox Acpsh

Condition: used, machine/vehicle number: 008563, X axis working area: 3000 mm Y axis working area: 1300 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Cedezruxvopfx Acporh

Condition: used, Year of construction: 2006, CNC gantry flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Work table: 1.5 x 6 m 2 oxy-fuel torches 51026 Crjdpfx Acjw El Udopsh

Condition: used, machine/vehicle number: 006601, Position 1: Panel Feeding and Loading PRIESS-BMA DLS-CNC Csdpfowuclrsx Acpsrh Position 2: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC