Used Gate for sale (605)

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Lrodpfsz Ehfaox Afujt Feed rate: max. 15 m/min Water-cooled guides Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Lrodpfx Afeihf Tpjuot Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

Condition: used, maximum load weight: 31,280 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2010, next inspection (TÜV): 12/2026, loading space length: 9,600 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 50 m³, Year of construction: 2010, Equipment: ABS, Stock No. 5753 Approx. 50 m³ Kempf 2-sided tipper semi-trailer / discharge gate / auger / aluminum rims ----* Manufacturer: Kempf * Type: SK 38/3 - 2-sided tipper with discharge gate! * First registration: 06/2010 * Gross vehicle weight: 38,000 kg * Unladen weight according to vehicle registration document: 6,720 kg * Payload: 31,280 kg * Axles: 3 x BPW with 1st axle as a lift axle / drum brakes * Suspension: Air suspension with lifting and lowering * Tires: 385/65 R 22.5 approx. 50% on aluminum rims * Color: Chassis grey, body white, tarpaulin red * Volume: approx. 50 m³ (9.60 m long x 2.45 m wide x 2.10 m high) * TÜV (technical inspection): 12/2026 * EBS Knorr * Semi-trailer can be tipped to the left and rear * 3 x pivoting side walls on the left * Rear door can be swung and pivoted to the right * Grain slide in the center * Pivoting crossbar above the rear wall * Kempf discharge gate type 400 with auger with outlet on the right * Control box for lifting, lowering, and operating the discharge gate in the center on the right in the PVC box * Cover plate for the auger at the front on the front wall * Entry on the front left * Tarpaulin with central locking * Pivoting tarpaulin stops * Operating platform at the front with steps on the left and right * 3 crossbars * Folding ridge pole * Hose trough on the right * Quarter fenders for 1st and 3rd axles Lredpfxez Em Tvo Afust * LED rear lights * LED reversing lights * LED work lights * Sight glass at the rear right * Cyclone * Loading pressure gauge * Access ladder on the right * PVC toolbox in the center on the right * Support legs (full load support) * Cargo area lighting German semi-trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes or sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: like new (used), Year of construction: 2020, load capacity: 800 kg, lifting height: 1,880 mm, construction height: 1,380 mm, operating hours: 661 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V Mast: 2W1880 ID: 24091.5051 Category: Demo Mast: 2W Lowered height: 1380 mm Lifting height: 1880 mm Capacity: 800 kg Platform height: 1200 mm Order picking height: 2800 mm Init.: Yes Year: 2020 Operating hours: 661 h Lsdpfx Aozv Rykofujrt Battery capacity: 24 V / 500 Ah Options: SAFETY gates! Complete, LIKE NEW!

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 1,880 mm, construction height: 1,560 mm, operating hours: 3,102 h, fuel type: electric, mast type: duplex, Manufacturer & model: TOYOTA OSE 100 Mast: 2W1880 ID: 25110.8747 Category: Used Mast type: 2W Lowered height: 1560 mm Lifting height: 1880 mm Lsdpfx Afozv Rz Uousrt Capacity: 1000 kg Platform height: 1200 mm Picking height: 2800 mm Initial lift: Yes Cabin width: 800 mm Year: 2020 Operating hours: 3102 hours Battery capacity: 24V / 620Ah Options: with SAFETY gates !!

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Ledpfx Asztl Scefuort Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Year of construction: 2020, condition: ready for operation (used), Four identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Lrsdpfougmwlex Afuot

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, Braun resaw Type CH6B-70, year 1972 Swing frame without width adjustment with splitting wedge Saw tensioner - hydraulic side pressure, year 1989 Round timber transverse conveyor with 4 strands, approx. 7 m long, year 1980 Round timber singulator with 5 strands, approx. 1.40 m long, year 1980 Mayerhofer carriage Type VH with auxiliary carriage, year 2002 Lrjdpfsv I D Ezox Afujt Powered resaw roller conveyor, 4 m long, 1.60 m wide, year 1980 Powered resaw roller conveyor, 1.60 m wide, approx. 15 m long with integrated ejector with 5 strands Transverse conveyor with 5 strands, approx. 6 m long, for side timber, year 1980 Sharpening equipment consisting of: Meinert resaw saw set machine PH4D, year 1967 Vollmer automatic resaw saw set machine AT

Year of construction: 2014, condition: excellent (used), Kohlhoff Cleancontrol SL-S/D Hygiene Station/Gate Manufacturer: Kohlhoff Model: Cleancontrol SL-S/D Machine number: 807705-10 Year of manufacture: 05/2014 Power supply: 400 V, 3 phase Lrjdox I Nvkspfx Afuet Power: 1.2 kW Brush length: 1100 mm Overall dimensions: 2100 × 1800 × 1800 mm Equipment: - Hygiene gate with turnstile - Sole cleaner - Hand disinfection unit The Kohlhoff Cleancontrol SL-S/D hygiene station is a comprehensive solution for personnel hygiene control in food processing facilities. The device combines sole cleaning, hand disinfection, and access control via a turnstile, effectively preventing contaminants from being carried into production areas. Its robust construction and fully automatic hygiene process ensure high cleaning and disinfection efficiency as well as easy, intuitive operation. The station is designed for intensive use in meat processing plants, food production facilities, and other environments with strict hygiene requirements.

Condition: used, Year of construction: 2016, operating hours: 762 h, functionality: fully functional, machine/vehicle number: 10022447, overall weight: 665 kg, load capacity: 30 kg, arm reach: 2,033 mm, KUKA KR 30-3 robotic workstation with KRC4 controller and SmartPad. Operating time: only 762 hours. For sale: a complete robotic workstation based on the KUKA KR 30-3 industrial robot, equipped with a KRC4 controller and a KUKA SmartPad operator panel. The unit comes from a research and development laboratory and was used for testing and industrial automation projects. As a result, the robot has very low operating hours, totaling only 762 hours. This workstation is an ideal solution for system integrators, technical universities, R&D departments, and companies implementing automation and robotics solutions for processes. Technical data: Manufacturer: KUKA Model: KR 30-3 Lsdpoziciwjfx Afusrt Year of manufacture: 2016 Payload: 30 kg Reach: 2033 mm Controller: KUKA KRC4 Operator panel: KUKA SmartPad Operating time: 762 h Controller power supply: 3x400 V Installed software options: EthernetKRL Profinet KRC-Nexxt RemoteService RobotSensorInterface Technical condition: The robot starts up correctly, and communication with the controller works properly. The visual condition is very good. The unit comes from a research and development project and has not been used in continuous industrial production. Included: KUKA KR 30-3 robot KRC4 controller KUKA SmartPad operator panel Cabling as shown in the pictures Additional information: The workstation can be expanded with: - pneumatic or electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation equipment. More products are available at tobesold.eu. Before shipment, the unit undergoes technical verification. A demonstration of the unit's operation is available by prior appointment.

Condition: used, Year of construction: 2008, operating hours: 9,950 h, functionality: fully functional, type of input current: three-phase, Handfeed station – 14 x feeder - 12 Clamp Binding Unit - Milling & Spine Preparation Units - Hot Melt Side Glue with pre-melter – Hot Melt Spine Glue with pre-melter - Drum Cover Feeder - Nipping & Pressing Station - Exit Raceway & Laydown Delivery - Conveyor System with Reject Gate - Muller Martini Esprit Trimmer Binding thickness 2 mm - 50 mm Cover size max. 640 mm Cover size min. 202 mm Max. speed 900 to 4,000 cycles/hr. Max. book size 380x320 mm Min. book size 120x100 mm Lodpfx Aoxtau Eefusrt

Condition: used, Powered roller conveyor Length: 9m Lsdpjzx Ef Tefx Afusrt Width: 1.4m Roller width: 1.2m Location: Germany, near Lake Chiemsee

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control 2 monitors / Varioterminal 10.4" Lsdpfx Aez Edlvjfujrt 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: used, Stainless steel knife gate valve Diameter 150 mm Made entirely of stainless steel Lredpfx Afox Nykboujt 2 units in stock See our other listings VMA Wekerom

Condition: excellent (used), Year of construction: 2013, operating hours: 404 h, functionality: fully functional, machine/vehicle number: 500897, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KR C4 Compact, teach pendant manufacturer: KUKA, teach pendant model: SmartPad, KUKA KR 6 R900 sixx FLR with KR C4 Compact controller and SmartPad The robot will be delivered with new memory backup batteries. The replacement has already been scheduled and will be carried out before the device is handed over to the new owner. Complete robotic workstation based on the KUKA KR 6 R900 sixx FLR industrial robot, along with the KR C4 Compact controller and SmartPad operator panel. The robot comes from a research and development environment and was used for laboratory and testing work. As a result, it has very low operating hours, approximately 404 hours, which is a small number compared to robots operating continuously on production lines. Lrsdpoziczmefx Afuet Specifications: Manufacturer: KUKA Model: KR 6 R900 sixx FLR Payload: 6 kg Reach: 901 mm Number of axes: 6 Year of manufacture: 2013 Controller: KUKA KR C4 Compact Operator panel: KUKA SmartPad Operating hours: approx. 404 h Application The robot is ideal for applications such as: automation of production processes, assembly stations, CNC machine operation, vision systems and machine vision, quality control, research and development laboratories, education and training in the field of robotics. Technical condition The device comes from a research and development laboratory. The visual condition is very good. The robot starts up and communicates with the controller. Before shipment, the device undergoes additional technical verification. Included: - KUKA KR 6 R900 sixx FLR robot, - KUKA KR C4 Compact controller, - SmartPad operator panel, - complete set of cables, - mounting base. Additional equipment It is possible to equip the workstation with: - pneumatic and electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation components. More information on tobesold.eu Product covered by a start-up warranty.

Condition: good (used), Industrial - swing gate 8 x 2 m Dimensions per gate side width ca. 395 cm Lodjk Shidjpfx Afujrt height approx. 220 cm struts diameter: 2 cm Galvanized steel barbed wire holder climbing over protection Item condition: used Further articles - new and used - you can find in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2013, operating hours: 22,420 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, displacement volume: 85 cm³, total length: 4,200 mm, total width: 2,100 mm, total height: 3,600 mm, overall weight: 7,300 kg, Equipment: documentation/manual, ARBURG Allrounder 1200 T 1000-170 Stock No.: 503459 Manufacturer: ARBURG Type: Allrounder 1200 T 1000-170 Control System: Selogica Year of Manufacture: 2013 Operating Hours: 22420 h Technical Data - Clamping Unit Clamping Force: 1000 kN Minimum Mold Height: 400 mm Maximum Mold Distance: 700 mm Opening Stroke: 300 mm Platen Size (Diameter): 1200 mm Lredpjz A Dmzefx Afujt Ejector Stroke: 175 mm Ejector Force: 25 kN Centering of Moving Platen (Diameter): 125 mm Centering of Fixed Platen (Diameter): 125 mm Mold Weight: 1150 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 85 cc Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 120 mm Number of Heating Zones: 4 Nozzle Distance: 210 mm Dimensions & Weight Machine Dimensions (L x W x H): 4.2 m x 2.1 m x 3.60 m Total Weight: 7300 kg Equipment 3x Temperature Control Units for Hot Runner Screen Text: German CEE Socket 16A Compact-Flash Drive Rotary Table Freely programmable inputs (2) and outputs (2) Machine with Material Hopper Machine with Water Manifold Needle Gate Nozzle, Hydraulically Actuated EUROMAP 67 Handling Interface Servo-Controlled Hydraulic Pumps Wear-Resistant Plasticizing Unit

Condition: excellent (used), functionality: fully functional, Wurster & Dietz roller conveyor with remover, roller width 2 m, with take-off table for boards, under-table crosscut saw with roller tables Lsdpfx Aeyx U E Ssfuort

Condition: used, Year of construction: 1980, machine/vehicle number: GUS 71 Typ 26.813, Full frame saw from Wusterer & Dietz including: Frame saw Saw tensioner Riving knife Ledpfx Afov Ummbjujrt Frame roller conveyor 4-strand puller Viewing by appointment.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 467334, Manufacture year 2010 Machine specifications: - Push infeed, max. length 6300 mm - Automatic length measuring and chalk reader - Cutting width 40 – 420 mm - Cutting height 15 – 170 mm - Min. cross section 20 x 10 mm - Max. cross section 270 x 170 / 410 x 30 mm - Motor 13.5 kW - Total electrical load approx. 22 kW -Operating pressure approx. 8 bar - Saw blade diameter 630 mm / bore 30 mm Lodpfxoypvdij Afusrt Consisting of: 1. Cross chain infeed system 8 pc. chain transport with 3 latch rows 2. Push infeed system with liftable pusher Infeed length 6300 mm, length detecting and chalk reader 3. OptiCom Direct controller 4. Opticut cross cut saw unit S90 XL With side pusher and waste gate 5. Outfeed transport belt

Condition: used, Year of construction: 2023, Overview This Krones Pressant Universal 1N is a container sweep-off depalletizer that lifts each container layer off the pallet stack and sweeps it onto the discharge table, while a separate handling module removes the layer pads and the empty pallets. The machine is built in Krones enviro design for reduced energy and media consumption. Operation is from a Krones touch terminal with a production dashboard and a separate control page for the pallet conveyor. Technical data - Manufacturer / model: Krones PRESSANT UNIVERSAL 1N - Machine type: container sweep-off depalletizer - Year of manufacture: 2023 - Application: depalletizing of glass bottles, several formats - Container throughput: 14,000 containers/h (machine setting) - Pallet format: flat pallets 1,200 x 1,000 mm - Container conveyor height: 1,300 mm - Sweep-off station: raised design for container heights above 320 mm, SEW servo drive - Discharge table: 90° connection, 3,600 mm table length, 15 steel conveyor chains, servo drive (SEW) - Lifting unit: servo drive (SEW), maintenance unit on the columns - Layer scanning: pneumatic - Layer centring: lateral and centring beam servo-motorised (SEW), pneumatic front flap - Stack fixing: lateral, motor-driven; pneumatic transfer plate - Packing material handling: 1 module with pivoted arm, suction gripper for layer pads and complete layers, vacuum ejector, pallet gripper (1 DIN size), motorised gripper frame rotation - Magazines: two magazine and stacking areas, free-standing chute for inverted trays - Central lubrication: Lincoln Quicklub, automatic pump Lsdpfxszzz Nae Afujrt - Pneumatics: Festo, minimum operating air pressure 5 bar, air connection G 1/2" - Power supply: 400 / 230 V, 3 Ph, 50 Hz, 57 A - Overall dimensions: depalletizer approx. 6,000 x 3,500 x H 5,620 mm; complete installation approx. 15,900 x 9,600 x H 5,620 mm - Finish: RAL 5013 cobalt blue columns, RAL 9018 papyrus white and RAL 7037 dusty grey machine parts - CE marked Scope of delivery - Krones PRESSANT UNIVERSAL 1N sweep-off depalletizer - Infeed roller conveyor, stainless steel rollers, roller width 1,350 mm, approx. 1,820 x 1,450 x 1,030 mm - Stainless steel platform with chain conveyor, approx. 5,000 x 2,500 x 1,680 mm - Krones PALCO pallet conveyor and Krones SYNCO container transport - Outfeed conveyors, stainless steel belts, belt widths 1,280 mm and 250 mm, approx. 5,200 x 1,700 x 1,420 mm and 5,700 x 500 x 1,420 mm - Krones operator terminal with production dashboard - Control cabinets with SEW servo drives, safety technology and central lubrication - Machine guarding with safety gates and locking pawl on the sweep-off station - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: good (used), The Esterer SS45 complete gate saw has undergone a complete technical overhaul. Only the appearance of the gate is no longer in optimal condition. Passage width: 45 cm Speed: 340 rpm Stroke: 500 mm Includes complete mounting, saw blades, and templates Features hydraulic blade lifting Includes a splitting wedge Lrsdofvb Etjpfx Afujt Drive power: 30 kW Includes hydraulic unit Includes complete control cabinet Please also check my other listings. I look forward to your inquiry.

Condition: used, Year of construction: 1999, Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Lredpfx Aomqty Hefust Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 Ljdoy N Dagopfx Afuort - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Condition: used, maximum load weight: 26,000 kg, overall weight: 36 kg, axle configuration: 3 axles, first registration: 03/2017, next inspection (TÜV): 12/2026, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,300 mm, loading space volume: 26 m³, Year of construction: 2017, Equipment: ABS, Well-maintained steel tipper semi-trailer, Schmitz Cargobull SGF?S3 Lsdpsz D Ry Djfx Afuert Equipment: Schmitz Cargobull axles Lift axle Roll tarp Rear gate Platform on the front wall Sealed against mud Lifting and lowering Factory equipment Foldable under-run protection For any questions regarding the equipment, please call. The original Schmitz offer can be sent as a PDF. Tire condition: approximately 50%. Errors and prior sale excepted!