Used Gate for sale (588)

Condition: used, overall weight: 25,000 kg, axle configuration: 3 axles, first registration: 10/2016, next inspection (TÜV): 11/2026, Cuppers LVA 09-16 AL 3-deck livestock trailer (12324) * Hub axle * Hydraulic loading ramp * Lift axle * BPW axles * Partition gate * Drinking trough * 3 x 18.40 = 55.20 m² * Unladen weight: 8,040 kg * MOT (periodic technical inspection): 11/2026 * Next inspection: 05/2027 -----Internal vehicle number: 12324 Dsdpfszq Nwdox Ad Nsck Errors and prior sale excepted.

Condition: like new (used), Year of construction: 2019, operating hours: 400 h, clamping force: 1,000 kN, screw diameter: 32 mm, displacement volume: 103 cm³, injection pressure: 2,200 bar, mold height (min.): 150 mm, ejector force: 25,000 N, ejector stroke: 100 mm, opening stroke: 350 mm, number of injections: 1, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S100iA – like-new, fully electric precision injection molding machine, manufactured in 2019, with only 400 operating hours. Your advantages: • 1,000 kN clamping force • FANUC 31i-B CNC control with a 15-inch touchscreen Dodpfxozrikme Ad Nock • 32 mm screw and 103 cm³ injection volume • Injection speed up to 200 mm/s, maximum 2,200 bar • Hardened W/C plasticizing unit – for temperatures up to 350 °C and up to 30 % glass fiber • Euromap 67 robot interface Tool space and clamping unit: • Plate dimensions 660 × 610 mm • Tie bar spacing 460 × 410 mm • Mold height 150–620 mm, extended version • Opening stroke 350 mm • Ejector stroke 100 mm, ejector force 25 kN Equipment includes, among other things: AI pressure and dosing control, tool and ejector protection, backflow monitoring, automatic tool height adjustment, energy consumption measurement, four-circuit flow meter, hopper slide, three-color LED signal light, three air valves, and cascade control for up to eight needle gate valves. Hungarian operating manual and warning instructions are available. A robot is not included in the scope of supply. Inspection by appointment. Further technical documents and the offer are available upon request.

Condition: new, Year of construction: 2026, color: grey, loading space volume: 11 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 750 mm, Roll-off container, 11 cubic meters, with a foldable and traversable swing gate Dimensions L/W/H in mm: 6000/2380/750 Dsdszru Tajpfx Ad Nsck Swing gate can be folded down and driven over Reinforced floor with U-profile as a support profile 2 tie-down points, 3.15 tons, on the front wall 10 tie-down points on the side wall Front wall trapezoidal up to the hook height Locking dimension according to DIN 3540 mm End profile on the sides in the form of a thick-walled tube Color RAL 7023 concrete gray

Condition: used, maximum load weight: 32,540 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2023, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Wielton, approx. 50 cbm grain tipper (Vehicle 655) First registration: June 27, 2023 Permissible total weight: 39,000 kg Unladen weight: 6,460 kg Payload: 32,540 kg Overall length: 11,090 mm Overall width: 2,550 mm Overall height: 3,710 mm Load volume: approx. 50 cbm MOT (TÜV) valid until: 06/2026, Inspection valid until: 12/2026 Roll tarp, platform Swinging gate with grain slide 2 x fall supports Air suspension with lifting and lowering function Axle pressure gauge 1st axle: lift axle BPW disc Tires: 385/65R22.5, 1st tire approx. 40/40%, 2nd tire approx. 70/50%, 3rd tire approx. 80/80% Half-shell fenders Access ladder over wheel arch, passenger side Dust bag GMP certified Dcedjzq Tm Aspfx Ad Nok 2 x LED reversing lights Foldable underrun protection Swinging gate with Krone slide and rubber seal Price: €27,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of €10,000; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, empty load weight: 6,110 kg, maximum load weight: 28,890 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2026, loading space length: 8,500 mm, loading space width: 2,440 mm, loading space height: 1,900 mm, loading space volume: 39 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2025, Equipment: ABS, Color: gray, unladen weight: 6110 kg, permissible total weight: 35000 kg, cargo space (L W H): 8,500 mm x 2,440 mm x 1,900 mm, tire size: 385/65 R22.5, cargo space volume: 39 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle, electronic braking system EBS, spare wheel holder, swing gate (hinged), grain slide, roof cover, platform, connection plug 1x15 and 2x7 pole, anti-spray, telematics system. The vehicle has not been used and was only approved for customs use. You can find our complete range of vehicles at [website address]. Would you like financing? With our value-added services, we offer you individual financing options, as well as full-service and telematics services. We will be happy to advise you. Dcjdpfozg S Drjx Ad Nok

Condition: used, Year of construction: 2001, Clamping force: approx. 420 t Components: 2 Mold mounting height: approx. 651 / 1100 mm Opening stroke: approx. 400 / 880 mm Tie bar spacing: approx. 900 × 800 mm Horizontal screw diameter: approx. 60 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 4 Special equipment: Needle gate Hot runner zones: 36 Flow rate: approx. 243 l/min Dcsdpfx Adezl S Nle Nok Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 156.5 A Current 2: 169 A Current 3: 100 A Weight: approx. 17.7 t

Condition: new, We offer roll-off containers / landscaping containers with a drive-over and spring-loaded rear door, a hydraulic drop gate, and a hydraulic French door, all in a spar-free design, available upon request. Delivery throughout Europe! Suitable for transporting heavy bulk goods and construction machinery. The only landscaping container with a clear / usable floor width of 235cm! ⚠️ Unfortunately, many dealers advertise with the Hardox brand name but do not use Hardox! We use exclusively "original" HARDOX® from the manufacturer SSAB! Our containers have a sticker with a QR scan code. You can use the number to check the "authenticity" of our products!!!! Dcjdpfx Aszhpklsd Nek --- FINANCING --- LEASE PURCHASE --- LEASING --- -possible, please contact us!- Standard version in HARDOX HB450 Dimensions: 4.5 - 7.0m x 2.35 x 0.8m 4.5 - 7.0m x 2.35 x 0.95m 4.5 - 7.0m x 2.35 x 1.05m 4.5 - 7.0m x 2.35 x 1.15m 4.5 - 7.0m x 2.35 x 1.25m 4.5 - 7.0m x 2.35 x 1.35m 4.5 - 7.0m x 2.35 x 1.40m Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV rule 214-017 Lifting bracket Ø 50 mm Hook height 1,570 mm DIN 30722-1 up to 15,000 kg GVW Material thicknesses "HARDOX HB450" Floor: 5mm Walls: 3, 4 or 5mm Cross member: INP 180 Or DIN 30722-2 up to 22,000 kg GVW -Rear door drive-over with spring relief -End wall raised / cab protection or alternatively flat -Closing profile made of square tubing -All-around tarpaulin and net hooks -Primed once on the inside, double coated on the outside -Double coated on the outside in a single color, RAL color of your choice Optionally available: -Standard wing doors -hydraulic rear door with wing doors -Drop gate, hydraulic or pneumatic mounted with piano hinge -Removable hinged flap "in the upper area" -Tie-down eyes in the floor -Roll tarp -Marcolin covering, manual or electric -Netting system for covering / load securing -Grain slide

Condition: like new (used), Year of construction: 2021, functionality: unexamined, lifting height: 1,600 mm, load capacity: 3,000 kg, overall weight: 1,450 kg, input voltage: 400 V, type of input current: three-phase, power: 3 kW (4.08 HP), Hello, I am selling a lift table from Pfaff Silberblau. The lift table was manufactured in 2021 and has never been installed or used – 0 operating hours. Condition: It was stored outdoors in the yard. As a result, it is somewhat dirty (dust, leaves), but has no rust or damage. The railings have been removed, but all parts and screws are included. After cleaning, it will look like new. Specifications: - Manufacturer: Pfaff Silberblau - Type: PL 30.160-031 - Year of manufacture: 10/2021 Dcodozq T Elopfx Ad Nsk - Load capacity: 3,000 kg - Platform: 2.50 x 2.00 m - Lifting height: 1.60 m - Overall height (bottom): 32 cm - Motor: 3 kW, 400 V three-phase - Weight: approx. 1,450 kg - CE compliant. Includes safety gate, 2 protective railings, overload flaps, under-run protection with roller shutter, 2nd control station and complete control system with emergency stop. Tip: Before the first use, someone with expertise should inspect it (oil, seals, electrical system), as it has been stored for a long time. Price: €10,500 (negotiable) – negotiable for quick pickup. Pick-up only (too heavy for shipping). Location: Pleidelsheim, postcode 74385. No guarantee, no returns. Sale is made excluding any liability for material defects, to the extent permitted by law. Sale as is. Payment in cash upon pickup or by bank transfer in advance. If you have any questions, please feel free to contact me!

Condition: used, Year of construction: 2008, Saddle stitcher Heidelberg Stitchmaster ST 450 Year: 2008 Operation / Control - Colour monitor - Semi automatic setting Feeders - Number of chain stations: 8 Dcjdpfx Ajh Ezmisd Nek - Hand feeding station(s) - Horizontal signature feeders: 1 x DHU 450 - Vertical signature feeders: 4 x DVU 450 - Cover feeder: CHU 450 - Pump(s) Stitching unit Heidelberg Stitchmaster ST 450 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 150 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left Technical specifications: Max. mechanical speed 14.000 cycles/hour Sizes (uncutted) Max. 320 x 480 mm Min. 85 x 128 mm Sizes (cutted) Max .315 x 475 mm Min. 80 x 120 mm Product thickness: max 12 mm

Condition: used, Year of construction: 2008, Saddle stitcher Müller Martini Primera A110 Year: 2008 +/- 9.400 production hours Dcodpfxjx Dkk Es Ad Nok Operation / Control - Colour monitor with touch screen Feeders - Horizontal signature feeders: 6 x 1555 - Cover feeder: 1529 - Pump(s) Stitching unit Müller Martini 0380.0452 - Oblique sheet control - Thickness control - Stitching heads: 2x HK75 - Delivery to the left - Reject gate, for incomplete products Trimmer Müller Martini 0449.0430 - Sets of knives: 1 - Center cutting device - Sets of knives: 1 Delivery Müller Martini Perfetto (0450.0401) - Compensating stacker - Delivery to the left Description modified on 4-4-2025

Condition: used, Year of construction: 2005, Saddle stitcher Heidelberg Stitchmaster ST 400 Year: 2005 Operation / Control Dcjdpfx Aoh E Ewdod Nsk - Colour monitor Feeders - Number of chain stations: 9 - Horizontal signature feeders: 2 x TAL 400 - Vertical signature feeders: 6 x TAS 400 - Cover feeder: UFA 400 - Excluding pump(s) Stitching unit Heidelberg Stitchmaster ST 400 - Thickness control - Stitching heads: 2 - Delivery to the left - Reject gate, for incomplete products Trimmer Heidelberg TR 400 - Sets of knives: 2 Delivery Heidelberg CHA - Compensating stacker - Delivery to the left

Condition: good (used), Year of construction: 2012, Marel CG Compact Grader The Compact Grader is designed to grade small pieces of product at high speed, including chicken parts and fillets, and other raw or frozen material up to 40 cm in length and width, at a throughput of up to 120 pieces a minute. The CG accurately grades and batches by weight and/or count, utilizing the M2200 terminal with a user-friendly interface. Like other Marel Compact Graders, the CG is a standalone unit with 6 gates that comes ready to use and is easy to install. Ethernet connection to Innova production software is available. Model: Marel CG Compact Grader Year: 2012 Dcjdpfezp D T Rjx Ad Nek Machine Dimensions (LxWxH) 2.920x900x1.600 mm Machine Weight: 185 kg. Belt Width: 305 mm Number of gates: 6 Gate division: 460 mm Accuracy: +/-2g (40-600g) +/-5g (600-1500g) +/-10g (1500-3000g) Capacity: 120 pcs/min Product weight: 40-3.000 gram Product length: 400 mm Product width: 250 mm Power: 500 Watt Voltage: 1 x 230 volts Frequency: 50-60 Hz Working pressure: 5.5 bar

Year of construction: 2008, condition: good (used), Item: M-07196-Ishida Tray Sealer Ishida - Automatic High Speed Tray Sealer Serie QX-775 R Year of production 2008 Dodpfx Aeh Dbwiod Njck Specification: Machine model QX775, Tray Sealer Suitable for 5 impression tool 40 mm gate Options vac gas/gas flushing Electrical requirements: 3 phase 415 V, 4500 VA Pneumatic Supply: 8 bar, 650 nominal l/min Weight: 830 kg Incl. Tray dispenser & tool trolley

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulics, front and rear * Electrical connections at the rear * Snow chains * Work spotlights * Rotating beacon lights * 1 aluminum diesel tank * 1 AdBlue tank SUPERSTRUCTURE * Jotha CombiCon 4520 U quick-change system * Year of manufacture (superstructure): 2010 * Lifting, lowering, tilting and high-dump function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Year of manufacture (snowplow): 2006 INTERCHANGEABLE FLATBED * Separate interchangeable flatbed for the Jotha-CombiCon system * Steel flatbed with aluminum side panels * Rear gate and side gates * Removable front grille, can be mounted at the front of the load area * Tie-down points in the floor of the loading area * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Gate height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread depth approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread depth approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * TÜV (technical inspection): 10/2026 * Gas test: New TÜV/gas test as well as weight reductions or increases are possible upon request. We will not leave you alone even after the purchase: We will help you obtain export or temporary license plates. A transfer of your vehicle within Germany is also possible. Just contact us - we will be happy to help! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and typing errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the purchase and sale of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we will support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Dcjdpfxjzq Iv Ss Ad Nek Special transports We will support you in the organization of special transports. Export and temporary license plates We will help you obtain export or temporary license plates. Customs formalities We will also support you with customs matters. Vehicle transfer On request, we will organize a transfer of your vehicle.

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension Djdpfx Aezq Ivxod Njck * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulic system front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacons * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body year of manufacture: 2010 * Loading, unloading, tilting and high-dump function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Snowplow year of manufacture: 2006 INTERCHANGEABLE FLATBED * Separate interchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side walls * Rear and side gates * Removable front grille, can be mounted at the front of the loading area * Tie-down points in the loading area floor * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side wall height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / GEARBOX * 175 kW (238 hp) * 6,374 cm³ displacement * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT/inspection as well as weight reductions or increases are possible upon request. We will not leave you alone even after the purchase: We will help you with obtaining export or short-term license plates. A transfer of your vehicle within Germany is also possible. Just contact us - we will be happy to help you! We speak German, English and Russian. All information without guarantee. Subject to changes, errors, printing and typing errors as well as prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sale of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your request! Our service for you: Vehicle loading We will help you with loading your purchased vehicles. Special transport We will support you with the organization of special transport. Export and short-term license plates We will help you with obtaining export or short-term license plates. Customs formalities We will also assist you with customs matters. Vehicle transfer If desired, we will organize a transfer of your vehicle.

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder trailer coupling * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulic system, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacons * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body construction year: 2010 * Lifting, lowering, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed included * Schmidt snowplow KL-V 32 * Snowplow construction year: 2006 INTERCHANGEABLE FLATBED * Separate interchangeable flatbed for the Jotha CombiCon system * Steel flatbed with aluminum side walls * Rear and side gates * Removable front grille, can be mounted at the front on the loading area * Lashing points in the loading floor * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Gate height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: Dodpfx Aszq Ivred Nock New MOT/inspection, as well as weight adjustments (reduction or increase) are possible upon request. We won't leave you alone even after the purchase: We will help you with obtaining export or short-term license plates. We can also arrange for the transport of your vehicle within Germany. Just contact us - we will be happy to help you! We speak German, English, and Russian. All information without guarantee. Subject to change, errors, printing and typesetting errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. For many years, we have stood for experience, reliability, and competence in the field of preparation and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for various applications. With us, not only the vehicle counts, but also the service behind it. Fairness, seriousness, and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transport We will support you in the organization of special transports. Export and short-term license plates We will help you obtain export or short-term license plates. Customs formalities We will also assist you with customs matters. Vehicle transport If desired, we will organize the transport of your vehicle to

Condition: used, mileage: 119,391 km, power: 175 kW (237.93 HP), first registration: 11/2010, overall weight: 12,500 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 10/2026, gearing type: semi-automatic, emission class: euro5, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), Mercedes-Benz Unimog U 400 4x4 | Jotha CombiCon | Schmidt Snowplow | Flatbed VIN: V225352 CHASSIS / COMPONENTS * 4x4 * Coil spring suspension * Wheelbase: 3,080 mm * ABS * Differential locks * Ringfeder hitch * 2-line compressed air connection for air-braked trailers * Front mounting plate * Municipal hydraulics, front and rear * Electrical connections at the rear * Snow chains * Work lights * Rotating beacon lights * 1 aluminum diesel tank * 1 AdBlue tank BODY * Jotha CombiCon 4520 U quick-change system * Body year of manufacture: 2010 * Lifting, lowering, tilting, and high-dumping function * Separate operation of the CombiCon system * Flatbed available * Schmidt Snowplow KL-V 32 * Snowplow year of manufacture: 2006 INTERCHANGEABLE FLATBED * Separate interchangeable flatbed for the Jotha-CombiCon system * Steel flatbed with aluminum side walls * Rear and side gates * Removable front grille, mountable at the front of the loading area * Lashing points in the loading area floor * Support legs with rollers * Internal dimensions approx.: * Length: 2,427 mm * Width: 2,078 mm * Side wall height: 402 mm * Volume: approx. 2.03 m³ TIRES * Axle 1: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % * Axle 2: 365/80 R20 MPT 152K, remaining tread approx. 80 % / 80 % ENGINE / TRANSMISSION * 175 kW (238 hp) * 6,374 cm³ displacement * Euro 5 * Telligent transmission, 3-pedal * Permanent all-wheel drive * Engine brake * Cruise control CABIN / DRIVER'S CAB * Air conditioning * Heated windshield * Rear view camera with monitor * CD radio Dsdpfezq Iv Esx Ad Njck * AUX and Bluetooth * Digital tachograph WEIGHTS * Permissible total weight: 12,500 kg * Unladen weight: 6,640 kg * Payload: 5,860 kg OTHER * Mileage: 119,391 km * MOT: 10/2026 * Inspection: New MOT/inspection as well as weight reductions or increases are possible upon request. We won't leave you alone even after the purchase: We will assist you in obtaining export or short-term registration plates. We can also arrange for the transport of your vehicle within Germany. Just contact us - we will be happy to help! We speak German, English, and Russian. All information without guarantee. Subject to changes, errors, printing and spelling errors, and prior sale. About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability, and competence in the field of refurbishment and distribution of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for various applications. With us, not only the vehicle counts, but also the service behind it. Fairness, integrity, and customer satisfaction are our top priorities. Therefore, we will personally and reliably support you - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry! Our service for you: Vehicle loading We will help you with the loading of your purchased vehicles. Special transports We will support you in the organization of special transports. Export and short-term registration plates We will help you in obtaining export or short-term registration plates. Customs formalities We will also assist you with customs matters. Vehicle transport Upon request, we will organize the transport of your vehicle to

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, input voltage: 400 V, PIPE AND PROFILE BENDING MACHINE This new pipe and profile bending machine is designed for the efficient forming of round and rectangular tubes, as well as round and square solid bars. Its robust construction, compact dimensions and 2.2 kW motor make it a practical solution for metalworking workshops, fabrication companies and industrial production facilities. The machine is suitable for producing curved components used in steel structures, frames, railings, gates, furniture, architectural elements and a wide range of custom metalwork applications. MATERIAL CAPACITY Round tube: up to 70 x 2 mm Rectangular tube: up to 60 x 60 x 3 mm Round solid bar: up to 35 mm Square solid bar: up to 35 x 35 mm TECHNICAL SPECIFICATIONS Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 400 V, three-phase Machine dimensions (L x W x H): 900 x 850 x 1700 mm Machine weight: 450 kg KEY ADVANTAGES Suitable for tubes, profiles and solid bars Wide material capacity Robust and stable construction Compact machine footprint Simple and convenient operation Dodpoytffwofx Ad Neck Suitable for workshop and production use New and fully operational machine DOCUMENTATION AND SERVICE 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English DELIVERY We can arrange delivery of the machine directly to the customer. Transport costs are calculated individually according to the delivery destination and the carrier’s quotation. Please contact our sales department to receive further information, a commercial offer or an individual transport quotation. Visit our website to explore our complete range of metalworking machines and equipment.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light Dodpsxn Eckjfx Ad Nsck * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2026, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Brakes * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles * Forced-steering axles Tire size * 385/65 R22.5, 9 t Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Dcedpfxexmudne Ad Njk Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey

Condition: used, Year of construction: 2000, Clamping force: approx. 200 t Number of components: 2 Dcodpfszlg S Ijx Ad Njk Mold installation height: approx. 310 / 760 mm Opening stroke: approx. 300 / 575 mm Tie bar spacing: approx. 560 × 560 mm Horizontal screw diameter: approx. 50 mm Vertical screw diameter: approx. 30 mm L/D ratio: 1 / 20 Core pull: 2 Special equipment: Needle gate Hot runner zones: 16 Flow rate: approx. 190 l/min Frequency: 50 Hz Power supply: 3 × 400 V Pressure: approx. 190 bar Current 1: 196 A Current 2: 110 A Current 3: 86 A Current 4: 67 A Weight: approx. 9.7 t

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 80 t, stroke length: 120 mm, table length: 2,500 mm, throat depth: 250 mm, distance table to ram: 385 mm, clearance between the columns: 2,000 mm, oil tank capacity: 160 l, total length: 2,600 mm, total width: 1,450 mm, total height: 2,300 mm, overall weight: 4,800 kg, Equipment: CE marking, documentation/manual, safety light barrier, Hydraulic CNC Servo Press Brake MTP 80X2500 with MTP-3212 Controller – In Stock The MTP 80X2500 is a hydraulic CNC servo press brake designed for accurate and efficient sheet-metal bending. The machine delivers a pressing force of 80 tonnes and offers a maximum working length of 2,500 mm. It is suitable for processing sheet metal up to 4 mm thick. The machine is equipped with two controlled axes: * X-axis – servo-controlled back-gauge positioning * Y-axis – servo-controlled ram movement The MTP-3212 CNC controller features a large colour touchscreen and a clear, intuitive operating menu. Its software automatically calculates the required bending angle, helping simplify machine setup and improve production efficiency. The controller can store data for up to 40 different punch types. The machine is fitted with an AMADA-style quick-clamping system, enabling fast and convenient tool changes. Two front material supports are included. High-quality components ensure reliable operation and a long service life. The hydraulic system uses a renowned German Rexroth valve, while the electrical system incorporates Schneider components. Safety components are supplied by Omron and Schneider. Steel hydraulic connections help minimize the risk of leakage. For comfortable operation, the press brake is equipped with a mobile control unit and a controller mounted on an adjustable arm. Integrated LED lighting provides excellent visibility throughout the working area. The machine includes extensive safety equipment, such as side guards, a rear safety gate, easily accessible emergency-stop switches and a safety light barrier. The light barrier helps prevent accidental access to the area between the punch and die during operation. A Polish-language operating manual and a CE declaration of conformity are included. Technical support is also available to assist with tooling selection, material selection, bending sequences and the configuration of suitable operating parameters. Technical specifications: * Pressing force: 80 t * Maximum working length: 2,500 mm * Maximum sheet thickness: 4 mm * Controlled axes: X and Y * Distance between columns: 2,000 mm Dedpfxjzrl Nlj Ad Nsck * Throat depth: 250 mm * Ram stroke: 120 mm * Maximum opening height: 385 mm * Back-gauge travel: 600 mm * Motor power: 5.5 kW * Overall weight: 4,800 kg * Dimensions (L × W × H): 2,600 × 1,450 × 2,300 mm * Front material supports: 2 * Punch clamping: AMADA-style quick-clamping system * CNC controller: MTP-3212 * Safety light barrier: Yes * CE marking: Yes * Documentation: Polish-language operating manual The machine is currently in stock and available for prompt dispatch. Delivery can be arranged throughout Europe and to destinations beyond Europe. Transport costs are calculated individually and depend on the delivery destination. Please contact us with your delivery address or postal code to receive a transport quotation.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026. Dcodpfjy Tiaaox Ad Nok

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, only a few operating hours Equipment and technical data: Stationary clean-air filter system ECO JET DUO 6 XL ZRS for extracting wood dust and chips Fans: 2 × 7.5 kWAir volume: 10,000 m³/hNegative pressure: 2,700 Pa (total) / 2,200 Pa (static)80 filters à 2.50 m, BIA Category M, electrically conductive, incl. support cagesFilter area: 77.6 m²Filter surface loading: 129 m³/(m² × h)Filter cleaning: AL-KO OPTI-JET®Pressure relief area: 0.84 m² (bursting discs)Base frame with discharge hopper and rotary valve; dry discharge with C-coupling ECO JET DUO 6 ZWR XL, 1,100 mm intermediate section for increasing unit height with 2 suction openings Base frame with discharge hopper and ZRS 960/1 FG rotary valve for chip disposal via on-site transport fan into an existing silo or similar; DN 200 transport pipe, approx. 1,260 mm, connection on site ZRS 960/1 FG Rotary valve: ATEX Directive 94/9/EC; CE 0588 Ex II 1D/- (indoor/outdoor); EX D; FSA 11 ATEX 1614XMotor: 0.18 kW / 0.78 A, 3 Ph / 400 V / 50 HzProtection class: IP 54 / B3; Insulation class FSpeed: 41 rpm; Capacity: 15,744 l/h*; 7 cellsInlet/outlet: 960 × 250 / 960 × 208 mmDimensions: 1,100 × 605 × 330 mm; Temperature range: up to 50 °C Further equipment: 400 mm suction connection with non-return flap in rectangular ductECO JET backflow flap 910 × 346 × 500 mm AL-KO Control System ACS II: Touchscreen display, ST 1200 controller, Sitop Power power supply, 24 V control voltage and integrated frequency inverter for cascade control of 2 fans up to 37 kW Plain-text fault display with common fault lamp; manual discharge start via display button; manual cleaning start via push button; cleaning via differential pressure; post-cleaning; external start via potential-free contact; operating hours counter; maintenance interval display; control cabinet lighting and ventilation; monitoring of fire damper, residual dust sensor, level sensor and max. filter pressure 10 individually controlled solenoid valves 4-group slide control for up to 8 machines: control via potential-free contact (PFK) or induction coil; 24 V DC motorised or electro-pneumatic slide gates; max. 4 panels per conveying line Power section ZRS up to 0.18 kW; time settings adjustable via touchscreen Bursting disc sensor and evaluation unit; pressure transmitter for inverter; pressure switches; warning beacon; 2 × PTC monitoring; rotary valve speed monitoring Exhaust/return air changeover 24 V DC for summer/winter operation Filter monitor/residual dust monitoring with evaluation unit according to DIN EN 12779 and H3: if 0.3 mg/m³ is exceeded, a self-latching alarm is triggered and the recirculation air damper automatically switches to exhaust air 10-way terminal box 24 V/230 V, fully wired for filter cleaning, incl. approx. 6 m cable Pipe system incl. bends, branches, reducers, PU hoses, machine connections, small parts and EP slide gates for extraction of 11 woodworking machines + 1 HRS according to specification Return air according to TRGS 553 with changeover damper and fire damper Galvanised base frame for container loading Paddle switch 24 V–230 V with socket for level indication in the discharge hopper Dimensions: 2,092 × 2,000 × 5,292 mm Inspection possible in assembled condition in 06667 Weißenfels. Dcedpfx Adjzlbqre Nok Price incl. dismantling. Availability: Short notice Location: ...

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout Dodpfx Adezlbpbs Njck - 6 workpiece supports: With front and rear...