Used Powder Gun for sale (2,489)

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Fedpfstrbrqox Al Uopn

Condition: new, Year of construction: 2025, Model SLP-30/O Worksize dimensions 1200 width x 1800 height x 3000 depth Overall dimensions 1560 width x 2410 height x 3300 depth Power supply Electric Nominal power 27kW Voltage 380V Frequency 50-60Hz Door type: one sided Anti-Ex Schloss Homogeneity < ± 3.0°C if 180°C Temperature stability < ± 3.0°C Temperature max. 230° C Transport Ground (Rail in the floor) Heaters Exchangeable roof heating panels Circulation Vertical Ventilator Radial assembled on exchangeable panel Fpsdpobuyrnsfx Al Uen Air flow Variable through holes on the walls Ventilation performance 1500m3/h Motor power 1,5kW Capacity 6480L Warranty 12 months

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Fedpjt Ul Exefx Al Ujpn

Condition: new, Year of construction: 2025, Automate your cleaning process with equipment from the Superior series: lifting device with a support grid for effortless handling of parts, filter systems for separating dirt, an exclusive oil separation system (OPS), and an intuitive touch panel. Standard models available from 150 L to 7,500 L. Tank capacity: 192 L External dimensions: 1330 x 945 x 1490 mm Usable dimensions of the grid: 680 x 435 x 330 mm Load weight: 80 kg Ultrasonic frequency: 40 kHz Fedpfx Ajf A Nq Hsl Uspn Ultrasonic power: 1200 W

Condition: used, Year of construction: 2010, functionality: fully functional, cooling capacity: 172.5 kW (234.53 HP), type of input current: three-phase, overall weight: 481 kg, input voltage: 400 V, Equipment: type plate available, Güntner table-top recooler with two fans. Description as per the attached data sheet. Multiple units available! Fsdpsy Dipcsfx Al Ujpn

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Fedpfx Aloyibhqe Ujpn Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: new, driver cabin: other, gearing type: other, Additional information: * GRG 650 ditch cleaning device * Hydraulically adjustable discharge chute * Electro-hydraulic switching valve Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transportation and delivery. * No liability for printing and typographical errors. * Subject to errors, changes and prior sale. * Offer subject to change. * Photos may differ. Price applies to the current condition. Fjdpfx Aszznlnsl Uopn * All information without guarantee.

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm Fpjdpszzairefx Al Uon TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: ready for operation (used), Siemens C79451-A3247-B71 power supply C4 051722, used, 100% functional Fpjdpezzhncjfx Al Uen

Condition: ready for operation (used), Siemens Simodrive 6SC6100-0GC08 462 010.9062.08 power supply, used, in good condition, 100% fully functional, scope of delivery as per photos. Fpodpoz Acn Tefx Al Ujn

Condition: ready for operation (used), Siemens Sinumerik 6FC5147-0AA14-0AA2 flat operator panel without power supply, used, in good condition, 100% functional, scope of delivery as per photos Fpedpfx Alsz Acq Uo Uen

Condition: ready for operation (used), Bosch NT 600 power supply, used, in good condition, 100% functional. Fpjdpsi D Uansfx Al Ujn

Condition: used, Year of construction: 2011, Colour: White Weight: 7.500 kg Price: On request - Year: 2011 - Documentation available: Yes - CE certificate present: No - Max. working width [mm]: 1300 - Number of spray booths [pcs]: 1 - Type of pump: Wagner - Options: Spray gun - └ Number of spray guns [pcs]: 4 - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 7 Fpsdpfozmvawex Al Ujn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Fsdpfexdibpsx Al Uspn Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Note: The machine is available from 02/12/2025!

Condition: used, Condenser Guntner -Type: GVH 080.1A/2x5-N(D) -Cooling capacity: 834 kW / 663 kW -Number of fans: 10 x 800 mm -RPM: 880/660 -Dimensions: 10250 x 2300 x 1450 mm -Volume: 300.3 L -Weight: 1860 kg -Quantity in stock: 1 -Stock number: SK 172 Fpsdpezl Eawefx Al Usn -Condition: Used in very good condition

Condition: refurbished (used), operating hours: 50 h, functionality: fully functional, ASCO C500 dry ice pelletizer, completely overhauled, including the electric motor. The most reliable industrial dry ice pelletizer without complex electronics. Fjdpfx Aljzqu Two Uopn The ASCO C500 is globally recognized as one of the most powerful and reliable dry ice pelletizers ever built by ASCO. Thanks to its simple and robust technology, this machine operates largely without complicated electronics. This minimizes malfunctions and makes maintenance and repairs easy to perform. The machine has been recently serviced, is in good condition, and is ready for immediate use. Technical specifications: Brand: ASCO Type: C500 Production capacity: up to 180 kg of dry ice per hour Standard pellet size: 3 mm Other sizes available at an additional cost: • 1.7 mm • 10 mm • 16 mm Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies Fpsdpfjz Dxr Iox Al Uen • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen

Condition: ready for operation (used), TETRA ALCIP 10 CIP WASHING UNIT YOM 2004 Fpsdpfsz Dpumsx Al Ujn LOCATION - POLAND EXCELLENT CONDITION

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal Fjdpfx Aeymka Hsl Uspn - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optiturn S400 HSC CNC Premium CNC lathe direct from the manufacturer. S400 HSC - The OPTIMUM Premium CNC milling machine with Siemens control SINUMERIK 828D is characterized by performance, speed, precision and long service life. Heavy-duty design - Compact design - .SIEMENS servomotors in all axes - Renishaw measuring arm for tool measurement Fsdpjymlhrofx Al Uspn - All servomotors with integrated encoder for maximum accuracy - Main spindle designed as motor spindle - 45° inclined bed design for particularly large machining diameters and unhindered chip flow into the chip flow into the chip tray - Hydraulic three-jaw lathe chuck Ø 170 mm with soft jaws - Servo tool changer VDI 30 with 12 tool positions - Hardened and precision-ground ball screws for high rapid traverse speeds in all axes axes - Faster tool change speed - High hydraulic clamping force - Heavy-duty cutting without vibration, to realize machining automation and high efficiency in extreme cases - Dimensionally stable linear guides ensure a long service life thanks to maximum static and dynamic rigidity rigidity - Device for manual tool measurement - Heat exchanger - Portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to run in programs. programs considerably - Belt-type chip conveyor ensures efficient chip removal - Work light for complete illumination of the work area - Coolant device with cleaning gun - RJ45 and power interface - EMC (electromagnetic compatibility) - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus see "Additional package SIEMENS OSS Plus" on page 117 - 1 year maintenance contract Basic included Machine data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 25 kVA Spindle Drive motor S1 operation 11.6 kW Torque drive motor S1 operation 65 Nm Drive motor S6-30% operation 14.4 kW Torque drive motor S6-30% operation 81 Nm Spindle holder A2-5 Spindle bore Ø 56 mm Chuck opening Ø 45 mm Hydraulic lathe chuck Ø 170 mm Coolant system Coolant pump power 700 W Tank capacity 160 liters Hydraulic system Hydraulic pump output 1.5 kW Tank capacity 36 liters Machine data Turning Ø max. 220 mm Turning length 320 mm Rotation Ø over cross slide 300 mm Rotation Ø over machine bed 500 mm Inclined bed 45° Speed range Spindle speeds* 30 - 6,000 min-1 Tool changer Type Servo VDI 30 Number of tool positions 12 Accuracy Repeat accuracy ± 0.004 mm Positioning accuracy ± 0.004 mm Travel distance X-axis 180 mm Z-axis 350 mm Feed force Dynamic X-axis 3.6 kN Z-axis 3.6 kN Feed speed X-axis / Z-axis 30 m/min. Motor torque X-axis / Z-axis 6 Nm Dimensions Length x width x height 2,000 x 2,250 x 1,550 mm Total weight 2,600 kg

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) Fpedpfomcibwsx Al Uon *

Condition: ready for operation (used), Year of construction: 2012, operating hours: 35,000 h, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: MITSUBISHI, controller model: M720 SSS, table load: 850 kg, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Additional equipment • Air blast through spindle • Rotary table with counter-support and hydraulic lock – 360° rotation • Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes Fsdpfx Aoz Ea Sxsl Uopn • Coolant through spindle, 20 bar + low-pressure cooling system • Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe • Chip flushing system • Chain-type chip conveyor • Telescopic covers for X, Y, Z axes • Full machine enclosure with safety door lock • Central lubrication system with oil cooler Machine Benefits Qualitative Machine Benefits • Condition: very good, low operating hours • Ready for tests Technical Machine Benefits • B-axis (tilting head): –120° to +120° • C-axis (rotary table): 360° continuous rotation • 24-position drum-type tool magazine • Table size: 1300 × 610 mm Extra Information Additional equipment Work area lighting Signal tower Air and coolant guns MPG handwheel Electrical cabinet cooling with air conditioner Temperature control system for spindle and ball screws Coolant oil separator Maintenance tool set

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,600 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Fodpex D Dx Aofx Al Uspn Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: used, Technical details: power consumption: 20 - 300 A welding current: U1 = 380 V connected load: 14 kVA weight of the machine approx.: 171 kg dimensions of machine: 0,9, x 0,5 x 0,92 m Transformer - Welding machine - Welding transformer Fodpfxeu Nwgre Al Uopn Control: 14 levels for thin sheet metal and 14 levels for thick sheet metal air-cooled Protection class P 21 with electric welding gun with cable approx. 6.0 meters Ground clamp and earth cable approx. 4.0 meters *

Condition: like new (used), Year of construction: 1995, functionality: fully functional, overall weight: 7,000 kg, space requirement height: 2,500 mm, space requirement length: 14,800 mm, space requirement width: 2,200 mm, Large stainless steel containers: dimensions: 14.80 x 2.20 x 2.50 m; weight: approx. 7,000 kg. The container was used for steaming tree trunks. The tank can also be used as a rainwater retention basin or fire-fighting water reservoir, and it is also suitable for private use in gardens for rainwater collection or even as a pool. Fpodpfx Aloxc Hvuj Ujn