Used Pre Shredder for sale (13,045)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, fuel type: electric, gearing type: automatic, Pezzolato electric, 300 KW 22 KW hydraulic Model PTH 1000/1000 E Sales code C6905 Dodozwdriepfx Acpjku The machine is still connected to the electrical power supply.

Condition: used, functionality: fully functional, machine/vehicle number: 500-8866, overall weight: 15,000 kg, total length: 3,600 mm, total width: 3,020 mm, total height: 2,470 mm, input voltage: 400 V, number of blades: 63, rotational speed (max.): 68 rpm, rotor diameter: 600 mm, rotor length: 1,500 mm, rotor width: 1,500 mm, type of input current: three-phase, WEIMA single-shaft slow-speed shredder – industrial, 1500 mm rotor, 1500 × 1835 mm opening For sale: used, single-shaft slow-speed shredder from the renowned WEIMA brand, designed for shredding a wide range of industrial waste – including hard plastics, film, big bags, wooden components, and furniture panels. This industrial-class machine, with its large rotor and wide inlet, guarantees high performance and the ability to process large-sized materials. 🔧 Technical specifications: Number of rotor knives: 63 Feed opening: 1500 × 1835 mm Rotor: length 1500 mm, diameter 600 mm, rotational speed 68 rpm Rotor type: reinforced V-rotor, screw-in knife holders Pressing system: pendulum type Dodpfx Acoz D Sz Nspeku Hydraulic and electrical system: in working order 📦 Additional equipment: New, unused screens: 2 pieces (thickness 10 mm, size 708 × 1225 mm, mesh size Ø 40 mm) Set of mounting blocks + lower mounting strip for screens ⚠️ Condition: Used machine Rotor and knives need to be replaced or refurbished All other components are in working order

Condition: like new (used), Year of construction: 2019, operating hours: 706 h, functionality: fully functional, Exellent condition, can be seen working Dsdpfxjz Hdi Ds Acpsku

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Main engine power: 55 kW Power of the feed motor: 2x3 kW Feed speed: 25 m/min Automatic motor load control. Dodpfx Acjz H Tvaopsku Product features: - High work efficiency, - Robust steel construction, - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Application: Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear Dodpfx Acjzgblrjpsku 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 012016, overall weight: 4,000 kg, rotor diameter: 370 mm, number of blades: 30, total length: 3,075 mm, total height: 1,500 mm, rotor length: 1,300 mm, rotor width: 370 mm, power: 22 kW (29.91 HP), rotational speed (max.): 120 rpm, hopper volume: 3,000 l, year of last overhaul: 2019, sieve perforation: 30 mm, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 1300 mm ᴓ rotor: 370 mm Dksdpozguw Iefx Acpju nº of cutters: 30 un (40x40 mm) Rotor speed: 118 rpm Motor: 22 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 4000 kg Machine fully refurbished (as new) and ready to operate SCOPE OF SUPPLY INCLUDES: - 500 mm high steel frame - 1000 mm infeed hopper - 2500 mm long evacuation belt conveyor including magnetic drum - Electric control pannel - Internal electric cabling between the electric control pannel and the shredder

Condition: new, Year of construction: 2026, operating hours: 4 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 24, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 12 months, Equipment: documentation/manual, Hacker shredders, wood chippers, and grinders – MHR510 ecoline XL Dedpfxjz Hn Tms Acpoku The MHR ecoline series comprises robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These plug-and-play shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies seeking an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows - Ecoring included - Robust construction - Larger feed opening - Excellent value for money - Plug-and-play (5-pole CEE plug, 400V, 32A three-phase power) - Siemens PLC controlled - MHR510 ecoline Rößler shredders – “Made in Germany”

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 0710, power: 51 kW (69.34 HP), type of input current: three-phase, sieve perforation: 20 mm, input voltage: 380 V, Robust industrial CSB wood shredder, Woody K45 type, manufactured in 2015. Equipped with a hydraulic feed ram, discharge conveyor belt with a head pulley magnet, and discharge auger. Suitable for processing MDF, chipboard, solid wood, pallets, and various wood waste streams. ✅ Heavy-duty industrial design ✅ Hydraulic push ram for consistent feed ✅ Magnet roller for automatic removal of metal contaminants ✅ Complete line with conveyor belt and discharge auger Djdoz Dibaopfx Acpjku ✅ PLC-controlled operation ✅ CE-compliant machine

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system Dsdpfxjz Idb No Acpoku - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Year of construction: 2013, condition: used, functionality: fully functional, FOR SALE: WASTEWATER PRE-TREATMENT SYSTEM Due to the expansion and relocation of our winery, the wastewater pre-treatment system, belonging to the ÉSE series of Élinvest Kft., is now available for sale. The system operated flawlessly from 2013 to 2024 with regular maintenance. Technical specifications: Untreated raw wastewater enters an oversized sump below the filter unit, from where a transfer pump with a capacity of approximately 25 m³/h conveys it to the pre-filter unit. The system filters the technological wastewater generated during operation through a Ø1 mm filter screen within 10 minutes of its generation, in automatic mode. Solid materials larger than 1x1 mm are collected in a 240-liter, covered plastic container, while the water phase containing dissolved and suspended solids flows by gravity to a transfer well that also collects municipal wastewater. After the completion of the harvesting operations, the wastewater discharge rate decreases to 20-40% of the harvesting water flow. This water is usually acidic; therefore, the discharge pH can be adjusted by adding a solution of sodium hydroxide (20-30% concentration). A pH control unit, suitable for dispensing both acid and alkali, maintains the pH of the treated wastewater within the specified limits (5.5 and 10). The operation and control are performed by a pH probe and a custom electrical control panel. The rotating drum of the filter unit is cleaned with a rotating brush and an intermittently operating pressure booster connected to a water supply with a minimum pressure of 4 bar. The construction technical approval number for the filter system is ÉME É-61-2011. Dodpfx Asz Eiigjcpeku The average wastewater discharge is 3-10 m³/day. The maximum instantaneous wastewater flow is 10 m³/h, and 25 m³/h in case of an emergency.

Condition: excellent (used), Weima WL4 wood chipper 18.5 kW engine Dodez Ip Dcspfx Acpsku 600 mm rotor length 28 knives on the rotor, V-rotor Hydraulic infeed hopper Automatic reversing function 20 mm screen Machine with very low operating hours. Used machine, its condition is only slightly different from a new machine. Weight approximately 1300 kg.

Condition: ready for operation (used), Year of construction: 2007, Rotor: approx. 248 mm Dkodjz Eqhkepfx Acpeu Feed opening: approx. 800 x 1000 mm Rotor length: approx. 800 mm Motor: 18.5 kW Tools: 19 Technical data available upon request Space requirement: approx. 1300 x 2100 mm

Condition: excellent (used), Year of construction: 1990, operating hours: 4,456 h, Wood shredder Dkjdpfx Acez A Ed Iepeu Manufacturer: Weima Type: WL 6 Year of manufacture: 1990 Hopper opening: 800 x 1,000 mm Power: 18.5 kW Screen diameter: 15 mm Rotor diameter: 368 mm Weight: approx. 1,500 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 1462, number of blades: 73, LINDNER MICROMAT 1500 – 75 kW – 2008 – OPERATIONAL MACHINE, TESTING POSSIBLE For sale: a Lindner Micromat 1500 single-shaft shredder from the renowned Austrian company, Lindner Recyclingtech. This machine has a power output of 75 kW and was manufactured in 2008. It is designed for the industrial shredding of plastics. Djdpfx Acoz Ayayopeku Technical specifications: Manufacturer: Lindner Recyclingtech Model: Micromat 1500 Year of manufacture: 2008 Power: 75 kW Power supply: 400 V / 50 Hz Machine number: 1462 Country of origin: Austria CE marking The machine is currently connected to an operational production line. It is possible to start and test the shredder directly in the hall, under real operating conditions. Arrangements can be made in advance for an inspection and a demonstration of the machine's operation in the hall.

Condition: used, Year of construction: 1991, functionality: fully functional, NOLTING WFH 250 chipper/shredder Dkjdpfxjz I I Nko Acpou Illustrative photo. More information coming soon.

Year of construction: 2021, condition: excellent (used), Weima wlk2000 refurbished by AMIS in 2021, Zerma GSE700/1400 2021 meant condition, used for PVC Dkodpjz Imkaofx Acpsu

Condition: good (used), Code: 0492 Brand: COMAFER Model: MAC 300 SUPER - CE Standard Shredder for wood waste, pallets, paper, cardboard, plastics and other types of materials – CE Standard Technical data: Base made from a sturdy electro-welded steel structure Dkodpoz Hy U Nefx Acpeu Loading hopper made from sturdy electro-welded steel structure Electrical control panel Knife roller to which the reversible and resharpenable knives are attached Screen fixed after the knife roller Output 15–100 kg/h Motor power 5,5 Hp Knife roller dimensions 130 x 450 mm n° 30 knives Screen with grate diameter 10 mm Suction inlet diameter 150 mm Overall dimensions of loading hopper mm 630 x 450 x 850 h Overall dimensions of shredder mm 1230 x 900 x 1350 h Weight kg 500

Condition: used, functionality: fully functional, KLOCKNER 120x500 K-2WV Shredder/Chipper Inlet width: 520mm Inlet height: 180mm Shaft width: 520mm Shaft diameter: 400mm Number of knives: 2 pcs Screen dimensions: 100x100mm Bottom drive shaft with gear, shaft motor 2.2kW Top drive shaft with gear, shaft motor 2.2kW Feeder length: 4400mm Feeder belt width: 500mm Dkjdpfjz E U I Iex Acpsu Feeder motor power: 1.4kW Main motor: 55kW

Condition: used, Fransson TRA-50 Wood Shredder Specifications: Manufacturer: Ingenjörsfirma A. Fransson, Sundsvall, Sweden Model: TRA-50 Year: 1972 Serial no.: 2108 Dkodpfsz H T Agsx Acpsu Length: 11,000 mm Width: 2,500 mm Height: 3,400 mm Infeed belt conveyor with hopper Shredder with electric motor Outfeed conveyor Electrical cabinet with CEE sockets Loading by forklift

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, empty load weight: 3,500 kg, working width: 1,400 mm, filling opening length: 1,400 mm, filling opening width: 700 mm, Untha 40 shredder This slow-speed shredder is ideal for shredding large items such as pallets, consumer electronics, televisions, solar panels, and bumpers. Power: 2 x 18.5 kW Electrical cabinet: Siemens Chamber dimensions: 1400 x 700 mm Loading hopper included. Weight: approx. 3500 kg The machine is in perfect working order. Price available upon request. Dksdszmzgpjpfx Acpeu More photos and a video of the machine in operation can be provided upon request. Testing is possible. More information is available by phone.

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Screen diameter: 15 mm Number of knives: 14 Djdpfx Acsz Ai N Repsku Rotational speed: 90 rpm Weight: 1,300 kg

Condition: good (used), Year of construction: 1996, Single-shaft shredder with push floor Rotor width: 820 mm Rotor diameter: 368 mm, with 40 blades 18.5 kW motor Dkedpozrlu Uofx Acpju Screen size: 20 mm In fully functional condition, ready for immediate use.

Condition: used, Price: On request Shredder Reinbold AZR 800 Hopper opening: 800×1000 mm Hopper volume: 0.9 m³ Rotor: 252 mm Rotor speed: 90 RPM Motor power: 18.5 kW Tools: 20 Air velocity: 28 m/sec Total dimensions: 2250×1350×1650 mm, Weight: 1500 kg - Documentation available: Yes - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Djdpez Ia Ncofx Acpsku Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, operating hours: 9,800 h, We offer this used Bonfiglioli Drake 2000 hammermill shredder, manufactured in 2006. Maximum power of the main motor: 400 kW Rated voltage: 400/690 V Frequency: 50 Hz Includes: Hammermill, double magnetic separation system for ferrous metals, Gauss separator for non-ferrous metals, aspiration system, conveyors, and electrical cabinet. If you have any further questions or require additional information, please send us a message or call. Djdozc I S Eepfx Acpeku

Condition: good (used), Year of construction: 1991, functionality: fully functional, power: 18.5 kW (25.15 HP), Single-shaft shredder / Waste wood shredder Manufacturer: KARA Energy Systems Type: KV 1508-260 Dedpfx Asz Hif Dscpeku Year of manufacture: 1991 - REV 2018 (General overhaul in 2018) CE marking Single-shaft shredder with a slow-running rotor for shredding waste wood, slats, panel remnants, and pallets. Typical applications: Carpentry, joinery, pallet manufacturing, wood processing, preparation of fuel for wood-fired furnaces. Hopper and rotor: Hopper opening approx. 1500 x 800 mm Rotor width approx. 1500 mm Rotor diameter approx. 260 mm Drive: Drive power 18.5 kW Basic concept: - Single-shaft shredder for wood waste - Long feed hopper with hopper extension - Drive via electric motor and gearbox, mounted on the side - Discharge via pipe connection Expected availability from January 2027.