Used Pre Shredder for sale (45,270)

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Kedjdwktkepfx Ab Uedw Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: refurbished (used), Year of construction: 2018, operating hours: 4,865 h, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F Year of manufacture: 2018 Operating hours: 4,865 Engine: Mercedes MTU, 490 HP 42 teeth AdBlue Crawler chassis Remote control Overband magnet Weight: 30,000 kg Machine is overhauled and immediately available. Kodpfx Ajxxb Uwob Ujdw

Condition: used, HERBOLD single-shaft shredder EWS 45/200 Kdedpfjxgtp Aex Ab Uew With pressing device (pendulum arm) Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: used, Granulator, Plastic Granulator, Shredder, Crusher, Moditec G3S ACP, Used Machine Manufacturer: Moditec Model: G3S ACP Kjdpoxvyihofx Ab Uodw Overall Dimensions: Width: 1560 mm Depth: 490 mm Height: 1460 mm Weight: 330 kg Year of Manufacture: 2003 Electrical Data: 400V, 50Hz, 2.2 kW Hopper Size: 570 x 240 x 520 mm

Condition: new, These Items are unused and boxed in original Packaging. Supplier Catalogue No. 52002567 The Mettler Toledo InPro 3253/120/PT1000 is a high‑performance in‑line pH sensor / electrode with some specific featuresA pre‑pressurized, liquid‑filled, low‑maintenance pH sensor. It has a built‑in PT1000 temperature sensor for temperature compensation. The sensor length (shaft) is 120 mm, which is relatively short, making it suitable for installations with limited insertion depth. It is sterilizable/autoclavable and optimized for steam sterilization or autoclaving cycles. That means it can withstand repeated sterilization without losing performance. Reference system: pre‑pressurized liquid electrolyte, with a ceramic diaphragm, and includes an Argenthal cartridge with a silver‑ion trap (for better performance in environments with sulfides etc.) It can handle pressures up to 4 bar gauge and works in the range 0 °C to 100 °C. It has process connection thread of Pg 13.5, and its connector is of “VP” type Kedpfx Aboxv Dv Es Usdw This sensor would be used in settings where real‑time, reliable pH measurement is needed under harsh or demanding conditions. Some examples: - Biopharmaceutical / biotechnology production, e.g. fermenters, bioreactors, where sterilisation (e.g. steam) is frequent and you need accurate pH control. - Hygienic food or beverage processing where cleaning and sanitisation/sterilisation are done in‑place (CIP / SIP). - Chemical processing, especially where pH may swing extreme and environment may be harsh (high/low pH, temperature, maybe some contaminants). - Water/wastewater treatment in situations needing durable, robust probe

Condition: excellent (used), CATALOG NUMBER 7772 TECHNICAL DATA - Top feed hopper dimensions (L/W): 440x990mm - Bottom feed hopper dimensions (L/W): 400x450mm - Rotor working width: 430mm - Main motor: 18.5kW Kodpjxix I Nofx Ab Ujdw - Number of knives: 2 pcs - Screen size: 19x19mm - Dimensions (L/W/H): 1740x960x2160mm - Weight: 1160kg ADVANTAGES – German-made – Very good condition – Used chipper Net price: 24,900 PLN Net price: 5,920 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Kdjdegmfa Ajpfx Ab Uew Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 18 h, ✅ Used & in stock ✅ Up to 150mm branch thickness ✅ Shipping available Powerful wood chipper in top condition for sale! The device is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22h Year of manufacture: 2025 SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc gasoline engine with 12.4 HP -- Self-feeding, no need to push -- 360° discharge -- With drawbar -- Highly user-friendly -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL ENGINE Equipped with a 420 cc gasoline engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is conveniently started via an electric starter or pull cord. The engine's power is transmitted to the centrifugal clutch via the V-belt, ensuring consistently powerful power output. The engine also features a low-oil sensor that shuts down the engine if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our chipper enables efficient and versatile processing of suitable wood stocks. The large hopper opening ensures optimal and convenient material feeding. High-quality workmanship and the use of durable materials ensure a long service life of the chipper, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at speeds of up to 2000 revolutions per minute, ensuring fast and efficient chipping of the material and reducing working time. The blades are made of high-strength steel and specifically designed for the chipper's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly, allowing maintenance to be performed quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be easily moved and positioned on your property, making handling, transport, and storage much easier. Technical Specifications Ksdowh Rnbepfx Ab Uedw Manufacturer (abbreviation): SCHORR Manufacturer's model number: RR150THX Drive type: V-belt 17x1255La Max. branch thickness: 150mm Chopping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Weight: 255kg Basic dimensions Overall length: 2700mm Overall width: 1218mm Overall height: 1424mm Discharge angle: 360º Engine Displacement: 420cc Maximum power: 9.1kW / 12.4hp Starter: Recoil starter Our competent team is happy to answer any questions you may have about the SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR100THX. We look forward to hearing from you and providing advice. Is the purchase price of a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing options, please feel free to contact us.

Condition: used, HERBOLD single-shaft shredder EWS 45/200 With pressing device (pendulum arm) Kedpfx Abexgq S Uo Uodw Working width 2000 mm Rotor diameter 450 mm Drive 2 x 90 kW Machine in very good condition, ready for operation

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, overall weight: 950 kg, warranty duration: 12 months, power: 7.5 kW (10.20 HP), input current: 32 A, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Mercodor shredder ZM 44 complete machine with safety devices and switches. Siemens PLC control with overload protection etc. Machine with a cutting area of 500x380 mm knife 14 mm 3 hooks drive 7.5 KW. Kdsdpfx Asiv Sr Neb Uow

Condition: repair required (used), - Shredder Lindner Komet 1750 - one motor with 160 kW Kjdexrl Dpepfx Ab Ujdw - Without electrical cabinet and hydraulics. - With all manuals. Electric and hydraulic diagrams.

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR Kdjdpfx Ajrit Nlsb Ujw (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: Kdedpfx Asd Dgw Ueb Ujw - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 100mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc petrol engine with 5.6 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- Compact size -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the shredder fits easily through any standard door and can therefore also be used in places that are difficult to access (e.g. gardens). With an operating weight of 93 kg in combination with the two tubeless wheels, the shredder is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The high-quality cutting unit of the shredder has 2 blades and 1 counter blade made of high-strength steel. The material of the blades is designed for the special requirements of the shredder, it is extremely resistant and at the same time not brittle. The low feed height of 910 mm makes it easier to feed in the wood and thanks to the large feed hopper, you save time by processing large quantities quickly. HIGH LEVEL OF SAFETY AND EASE OF USE Important safety features such as an emergency stop bar on the handle or the central emergency stop button maximize work safety. The integrated catch guard in the feed hopper prevents small pieces of wood from flying out of the hopper. The motor is also equipped with a low oil sensor. This prevents the engine from starting if the oil level is too low to avoid serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is the low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR100THX Drive type: V-belt 13x860Li Max. Branch thickness: 100mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 93kg Basic dimensions Total length: 1450mm Overall width: 600mm Total height: 1080mm Discharge angle: 360º Engine capacity Displacement: 196ccm Power max: 4,1kW / 5,6PS Ksdpfx Aet Ivaasb Uodw Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 100MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: used, Double-shaft shredder Drive 37.50 KW Ksdpfx Absxgtcvo Usdw

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet Kdsdpfxexrl N Ej Ab Ujw fully overhauled new couling unit READY FOR DISPATCH

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Ksdpfx Absd E R D Se Usdw Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 22 h, ✅ Used & in stock ✅ Up to 100mm branch thickness ✅ Shipping available Powerful wood chipper in top condition for sale! The device is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 22h Year of manufacture: 2025 SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX Powerful wood chipper for branches up to 10cm in diameter. Extremely robust and compact. -- 196cc gasoline engine with 5.6 HP -- Self-feeding, no additional pressure required -- 360° discharge -- Compact size -- Highly user-friendly -- Extremely robust and reliable FEATURES / FEATURES Kedpfx Aewh Rmdsb Uedw POWERFUL LIGHTWEIGHT The SCHORR RR100THX wood chipper impresses with its practical size, which maximizes flexibility when used in different locations. Thanks to its width of just 600 mm, the chipper fits easily through any standard door and can therefore be used even in hard-to-reach places (e.g., gardens). With an operating weight of 93 kg, the chipper, combined with its two tubeless wheels, is easy to store and transport, even in confined spaces. RELIABLE IN EVERY RESPECT The chipper's high-quality cutting unit features two blades and one counter knife made of high-strength steel. The blade material is designed to meet the specific requirements of the chipper; it is extremely durable yet not brittle. The low filling height of 910 mm facilitates wood feeding, and the large hopper saves you time by quickly processing large quantities. HIGH SAFETY AND EASE OF USE Important safety features such as an emergency stop bar on the handle and the central emergency stop button maximize work safety. The integrated catch guard in the hopper prevents small pieces of wood from flying out of the hopper. The engine is also equipped with a low-oil sensor. This prevents the engine from starting if the oil level is too low, thus preventing serious engine damage. The ergonomic design of the controls and easy access to maintenance areas complete the practicality of the wood chipper. LOW FUEL CONSUMPTION A major advantage of the efficient engine is its low fuel consumption and the associated reduction in environmental impact. The 196 cc engine also produces less noise than larger machines, making this shredder ideal for residential areas. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model number: RR100THX Drive type: V-belt 13x860Li Max. branch thickness: 100mm Chopping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Weight: 93kg Basic dimensions Overall length: 1450mm Overall width: 600mm Overall height: 1080mm Discharge angle: 360º Engine Displacement: 196ccm Maximum power: 4.1kW / 5.6hp Starter: Recoil starter Our competent team is happy to answer any questions you may have about the SCHORR WOOD CHIPPER 100MM BRANCH THICKNESS RR100THX. We look forward to hearing from you and providing advice. Is the purchase price of a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing options, please feel free to contact us.

Condition: used, Opening: approx. 1600 x 1600 mm Kdjdpfx Abjxgtdas Ujw Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm

Condition: used, Year of construction: 2006, SHREDDER TYRANNOSAURUS 9904 IN IN GOOD CONDITION FOR SALE. THE BIGGEST SINGLE-SHAFT-WASTE-SHREDDER OF THE WORLD. WEIGHT APPROX. 70 TONS. Kdedpfxexrl Eao Ab Uew Technical Data: REXROTH-hydraulics power pack: 525 kW two hydraulic motors are installed at both ends of the rotor Rotor Diameter 1 000 mm Rotor Length 3 200 mm Rotor Knives 139 pieces, turnable fur multiple use Counter nnife cassettes 4 pieces, working separately Counter knives 24 pieces, turnable fur multiple use Screen 4 segments, opening separately when foreign pieces coming in the machine Hydraulic pusher Dimensions of the machine: - Length 6 550 mm - Width 6 800 mm - Height 3 610 mm Total weight approx. 70 tons This advertisement is showing photos of the machine as it is and example picture for illustration purpose. The machine is dismantled on stock. More information could be send on request.

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide Kdjdpfxod Hkqhs Ab Uew - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: new, Year of construction: 2024, ✅ New & in stock ✅ Up to 150mm branch thickness ✅ Shipping possible SCHORR WOOD CHIPPER 150MM BRANCH THICKNESS RR150THX Powerful wood chipper for branches up to 15cm in diameter. Extremely robust and compact. -- 420 cc petrol engine with 12.4 HP -- Self-feeding no additional pressure necessary -- 360° ejection -- With drawbar Kdjdpfet Ivl Aex Ab Uew -- High user-friendliness -- Extremely robust and reliable EQUIPMENT / FEATURES POWERFUL MOTOR Equipped with a 420 cubic meter petrol engine, the RR150THX wood chipper offers outstanding performance that effortlessly handles even the most demanding tasks. The engine is started conveniently via the electric starter or the cable pull. The power of the engine is transmitted to the centrifugal clutch via the V-belts, ensuring a consistently high power output. The engine also has a low oil sensor, which switches the engine off if the oil level is too low to prevent serious consequential damage. HIGH PROCESSING CAPACITY With the ability to shred branches up to 15 cm in diameter, our shredder enables efficient and versatile processing of suitable wood stocks. Thanks to the large opening of the feed hopper, optimum and convenient feeding of the material is guaranteed. The high-quality workmanship and the use of hard-wearing materials ensure a long service life for the shredder, even with intensive use. EFFICIENT CUTTING SYSTEM The blades rotate at a speed of up to 2000 revolutions per minute, which ensures fast and efficient shredding of the material and reduces working time. The blades are made of high-strength steel and are specially designed for the shredder's demanding tasks. EASY MAINTENANCE Access to key components is designed to be particularly user-friendly so that maintenance work can be carried out quickly and easily, minimizing both operating costs and downtime. HIGH MOBILITY Thanks to the integrated drawbar and wheels, the chipper can be moved and positioned effortlessly around your site, making handling, transportation and storage much easier. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR150THX Drive type: V-belt 17x1255La Max. Branch thickness: 150mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter blade Own weight: 255kg Basic dimensions Total length: 2700mm Total width: 1218mm Total height: 1424mm Ejection angle: 360º Engine capacity Displacement: 420ccm Power max: 9,1kW / 12,4PS Starter: Reversing starter Our expert team will be happy to answer any questions you may have about the SCHORR HOLZHÄCKSLER 150MM ASTSTÄRKE RR100THX. We look forward to hearing from you and assisting you with advice. Are the purchase costs for a wood chipper too high for you? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, which you can take advantage of, please contact us.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 6,429 h, JENZ AZ 50 Kdodpfoxrl D Nsx Ab Uow The machine is partially refurbished and offered at an attractive price. The engine and rotor are running perfectly. Videos can be provided upon request. Full documentation is available. The following work has already been carried out: - Panels overhauled and newly painted - Minor welding work - Water cooler replaced The following work still needs to be completed: - Remaining welding work - Welding the exhaust line - New bearings for the plate conveyor - Painting of machine chassis - Complete assembly - Checking the radio remote control

Year of construction: 2023, condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: Ksdpfx Ajdv Eu Hjb Usdw - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet Kdedpfexrl A Sjx Ab Uow fully overhauled new knives new cooling unit READY TO GO