Used Precision Surface Grinding Machine for sale (93,218)

Condition: used, Mechanical pull-down NC machine vice FRIBOSA type size B Precision machine vice, grinding vice, clamp Jaw width 100 mm Jaw height 34 mm Clamping width 0 to 130 mm guideway height 40 mm guideway length 270 mm Dwsdpfx Ajilx Ufsh Ued - mechanical machine vice - Clamping range via trapezoidal spindle - Stable base body ground on all sides - Can be clamped horizontally, vertically or laterally Dimension L x W x H 310 x 100 x 77 mm weight: 10 kg good condition

Condition: reconditioned (used), Year of construction: 1970, functionality: fully functional, Table size 800 x 200 mm Magnet table 600 x 200 mm Djdpsw R Dnxsfx Ah Uowd Grinding capacity 630 x 200 mm Max grinding high 320 mm Dia of grinding wheel max:250 mm Spindle speed 2750 rpm Power required 3,6 kW Weight 2200 kgs Dimensions L x W x H =: 1900 x 1500 x 2000 mm Dimensions of coolant tank L x W x H = 400 x 300 x 500 mm

Condition: used, grinding length: 1,100 mm, grinding width: 550 mm, overall weight: 5,700 kg, 500 x 1050mm Magnetic Chuck, Dsdpeu D H Stsfx Ah Uowd 550mm Cross Traverse. 1100mm Long Traverese. 10HP Spindle Motor. Distance from Table to spindle Centre = 600mm. Coolant tank Weight 5700KG.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Stopped working, selling due to lack of use! The robot was completely renovated a few years ago! Dwodpfxjvny U Se Ah Ujd

Condition: good (used), total height: 2,500 mm, total length: 5,300 mm, total width: 2,500 mm, feed length X-axis: 1,550 mm, feed length Y-axis: 600 mm, grinding height: 800 mm, overall weight: 7,800 kg, GER RS 15/60 grinding machine Dedpfx Ahsvli H Se Uowd Table 1500 x 600 mm X-axis travel 1550 mm Y-axis travel 600 mm Maximum grinding height 800 mm Wheel size 400 x 100 mm Automatic infeed Yes Dovetail accessory Yes Cooling system Yes Machine dimensions (width x length x height) 2500 x 5300 x 2500 Weight 7800 kg

Condition: ready for operation (used), Longitudinal movement of the table manual drive: 750mm, longitudinal movement of the table hydraulic drive: 730mm, transverse movement of the table manual drive: 300mm, transverse movement of the table hydraulic drive: 290mm, usable surface of the table: 700x250mm, number of T-slots: 3, width of T-slots: 14mm, vertical movement of the grinding head: 400mm, division value of the grinding head manual drive: 0.01mm, distance between the inside of the grinding wheel and the column: 347.5mm, clearance under the new grinding wheel: 355mm, maximum grinding wheel diameter: 305mm, minimum grinding wheel diameter: 230mm, grinding wheel width: 25mm, grinding wheel bore: 127mm, division value of the cross table manual drive: 0.02mm, longitudinal feed of the table hydraulically: 2-25m/min, cross feed of the table stepwise, hydraulic and adjustable: 2-16mm/stroke, cross feed of the support hydraulically and continuous: 0.5-6m/min, volume of the hydraulic unit: 35l, cooling device for grinding wheel/on demand: 30l. No defects known, with documentation, an on-site inspection is possible. Dodpfsw Uk Awsx Ah Uowd

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, grinding length: 1,500 mm, grinding width: 300 mm, Disc grinder magnetic clamping plate 1500mm x 300mm Dodpfx Ahow A N D Ro Uewd

Year of construction: 1978, condition: used, grinding length 600 mm grinding width 300 - 320 mm Electromagnetic clamping plate 500 x 200 mm Important note! There is no hydraulic and no coolant unit included! Dwjdpfxjcwic Io Ah Usd Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Jones & Shipman 540 surface grinder Power raise & lower C/w a 460 x 150 mm close pole magnet, Dust extraction Dodpfx Aorpi I Ejh Uswd Calibration : TBC execution.

Condition: excellent (used), Year of construction: 2002, grinding length 1300 mm grinding width 700 mm workpiece height 575 mm Control Abamatic 1ND spindle turning speed - stepless 1000 - 2600 U/min table load 1,3 t surface area 1020 x 510 mm dimensions of grinding wheel 400 x 100 x 127 mm x-axis 1000 mm y-axis 700 mm z-axis 500 / 575/ mm total power requirement 32 kW weight of the machine ca. 6,1 t Dedpfx Ahewgiyyo Ujwd dimensions of the machine ca. 4,1 x 3,5 x 2,6 m Cross movement electromechanically, continuously adjustable of 1-5000mm/min intermittent cross feeder 1 - 95 mm/pulse The smallest progronating value 0.001 mm Equipment movement electromechanically, continuously from 1 - 3000 mm/min The smallest progronating value 0.001 mm Special accessories: Oil refrigerator, folding raid, band filter, magnetic clamping plate

Condition: good (used), JUNG D22 / Internal Cylindrical Grinding Machine - Machine suitable for internal cylindrical grinding and face grinding - Smallest machinable bore: 14 mm - Largest machinable bore: 150 mm - Grinding length without face grinding attachment: 250 mm - Grinding length with face grinding attachment: [information not provided] - 6 workpiece spindle speeds: 46–270 rpm - Spindle head swivels left/right: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Spindle head adjustable/skewed up to 30 degrees each - Worktable adjustable/skewed forward/backward up to 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - 3-jaw chuck - Spare grinding spindles Dsdsw Sv Dhspfx Ah Uswd Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Year of construction: 1967, condition: ready for operation (used), Max. grinding length: 1000mm, max. grinding width: 500mm, max. working height: 540mm, grinding spindle slide stroke vertical/ horizontal: 465/ 500mm, swiveling range: 1800°, table clamping surface: 1500/450mm, clamping slots number: 3, clamping slots distance: 125mm, clamping slots width: 16H7mm, table cross travel: 500mm, table longitudinal travel: 1000mm. Length: 4650mm, width: 2600mm, height: 2850mm, weight: 7.1t. With machine card. The electronics were renewed in 2022. An on-site inspection is possible. Dwodpfx Asw Sxxzoh Ujd

Condition: new, IG 280 SD Specifications Motors Grinding Spindle Motor 20HP, 200 - 2330RPM Rotary Table Motor 1HP, 5 - 70RPM Servo Column Motor 2KW Coolant Pump 3/4HP, 45GPM Table Diameter 24" Dwjdpoubbp Sjfx Ah Ujd Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Custom Table Options 18" diameter T-slot or drilled for customer fixtures Contact a DCM Technical Specialist for other custom table & fixturing options Capacity Max Swing Diameter 27" Max Part Height 11" with a segmented wheel 12" with a 2A2T wheel Grinding Wheel Options Segmented Wheel Hub Kits 12" or 15" diameter 2A2T Ring Wheel Hub 12" diameter 6A2 Wheel Hub 8" diameter Cortland Chuck 12" or 15" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM AC motor driven Y-axis Electrical Requirements 230V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 80" wide, 68" deep, 90" high Weight Machine & Swarf System: 5,480LBS. Electrical Box: 960LBS. IG 280 SD Features • 24" variable strength electromagnetic chuck with auto demag cycle • 20HP variable speed grinding spindle motor • Thru-spindle vacuum/pressure feed • Integral air mist collection and coolant flow systems for clean and consistent grinding • Programmable touch screen HMI controls • Manual pulse generator for precise Z-axis positioning • Internal memory for saving grind process recipes to aid in quick changeover • Password protection and operator lock-out features • Automatic routine maintenance reminders • 76" x 64" Footprint

Condition: used, Surface grinding machine Brand: Ger Model: RS-75/35 3 automatic axes (X, Y, Z) Technical specifications Low column: - Maximum grinding area: 750x375mm (X, Y) - Table to grinding wheel center distance: 525mm - Table speed: 2 to 32m/min. - Maximum table travel: 800mm - Maximum workpiece weight: 500kg - Magnetic table: 700x250mm Cross travel: - Maximum cross travel: 350mm - Rapid cross feed: 1.5m/min. Dwodpfx Ajwx Nlmoh Uod - Automatic cross feed: 2 to 60mm/rev. - Handwheel revolution: 3mm - Handwheel division: 0.02mm Vertical movement: - Rapid vertical feed: 200mm - Handwheel revolution: 0.24mm - Handwheel division: 0.002mm - Wheel dimensions: 300x50x76.2mm Motors: - Head: 6Hp - Pump: 3Hp - Feeds: 0.75HP - Total: 7.5KVA Weight: 3,700kg Dimensions: 2,400x1,850x2,300mm

Condition: used, Year of construction: 1997, grinding length 880 mm grinding width 510 mm Control Siemens max. turning speeds 4.300 min/-1 grinding wheel diameter 210 - 400 mm grinding wheel width 100 mm total power requirement 26 kW weight of the machine ca. 7,5 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale! Djdewwl N Sopfx Ah Uewd

Condition: used, Year of construction: 1985, grinding length 600 mm grinding width 200 mm total power requirement 7,5 kW weight of the machine ca. 2,3 t Dedpfowd Tx Uox Ah Uswd

Condition: good (used), Rotary Table Surface Grinding Machine ARTER A3 - 16 -Max. grinding diameter: 450 mm -Grinding height approx. 220 mm -Max. workpiece weight: 250 kg -Feeds -Total power requirement: 4 kW -Cooling device -Machine enclosure Dwodpfx Aow Dpkmsh Uod -Work light Dimensions: LxWxH: 2.5 x 1.5 x 1.7 meters / Weight: 3500 kg Errors and input mistakes excepted.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Dwodponxi Uuefx Ah Uod Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: used, Year of construction: 2006, grinding length 800 mm grinding width mm workpiece height 400 mm Control total power requirement 60 kW weight of the machine ca. 17 t dimensions of the machine ca. m Djdovkiutjpfx Ah Ujwd

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Dsdpfx Ahonxi R Uj Uswd Coolant System Dust extraction Lighting

Condition: used, Year of construction: 2000, grinding length 1600 mm Dodpfxst Hxcbe Ah Uowd grinding width 600 mm workpiece height 500 mm total power requirement 50 kW

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Dsdpfsnzh Uiox Ah Ujwd Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: used, Year of construction: 1998, grinding length 2000 mm grinding width 600 mm total power requirement 17 kW Dwodpfx Ahjv S Ip Eo Uod weight of the machine ca. 10 t

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield Dsdpfx Aenzh T Njh Uewd

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments Dwjdpfx Ajubbqish Usd 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint