Used Preset for sale (308)

Condition: used, Technical details: tube diameter: siehe o mm wall strength: siehe o mm voltage: 230 V / 1Phase V total power requirement: 0,55 kW machine weight approx.: 56 kg dimensions L x W x H: 0,45 x 0,37 x 0,35 m HYDRAULIC LINE PRESETTING DEVICE for EO pipes Application for crimping flared fittings on hydraulic lines. Crimping of common raw materials such as steel (ST 35.4 NBK and-or ST 37.4 NBK and-or ST 52.4 NBK), stainless steel (1.4571/1.4541/316Ti or similar) and copper pressure-controlled There is a flaring tool for the size Ø 14mm on the machine. The operating pressure is variably adjustable. * Gedpju Icu Sefx Abrstu

Condition: good (used), functionality: fully functional, Keyence VHX 700F Measurement Microscope in fully functional condition. - Base unit VHX 700F - Stand VHX-J20 - Objective lens VH-Z20R - Reference object (calibrated glass scale) - User manual Camera Scanning method: Progressive Image sensor: 1/1.8-inch, 2.11 megapixel CCD sensor Total pixels: 1688 (H) x 1248 (V) Effective pixels: 1628 (H) x 1236 (V) Usable pixels: 1600 (H) x 1200 (V) Frame rate: Selectable 15 fps and 28 fps Resolution: 2 megapixels, 1600 (H) x 1200 (V), approx. 1000 TV lines Gain: AUTO, NORMAL, PRESET Electronic shutter: AUTO, MANUAL, OFF, 1/15, 1/30, 1/60, 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/9000, 1/19000 Supercharge shutter: 0.2 seconds to 17 seconds adjustable in 0.1 second increments White balance: Auto, Manual, One-touch setting, Preset (2700 K, 3200 K, 5600 K, 9000 K) Back focus adjustment: Not required Gtsdpfx Abow Ah Axjrju LCD Monitor: 17-inch color LCD (TFT)*1 Panel size: 365.76 (H) x 228.6 (W) mm*1 Pixel pitch: 0.1905 (H) x 0.1905 (W) mm*1 Number of pixels: 1920 (H) x 1200 (W) (WUXGA)*1 Display colors: Approx. 16,770,000 colors *2*1 Brightness: 270 cd/m² (typical)*1 Contrast ratio: 450:1 (typical)*1 Viewing angle: ±80° (typical, horizontal), ±70° (typical, vertical)*1 Hard Drive 500 GB (including 80 GB reserve capacity) Approx. 2.1 million images (with compression of a 2-megapixel image) or approx. 70,000 images (if 2-megapixel images are uncompressed) Image format JPEG/HD Photo (compressed), TIFF (uncompressed) Viewable image size: 1600 pixels (H) x 1200 pixels (V) Light source: Lamp 12 V, 100 W, halogen lamp Video output: Output format DVI-I, 1920 x 1200 pixels Output Scan frequency

Condition: used, functionality: fully functional, working width: 850 mm, total height: 1,160 mm, total width: 748 mm, total length: 1,520 mm, noise level: 71 dB, battery capacity: 120 Ah, rotational speed (min.): 600 rpm, rotational speed (max.): 1,300 rpm, B 60 W BP DOSE (ROLLER) Walk-behind scrubber-dryer The B 60 W Bp Dose walk-behind scrubber-dryer is equipped with a drive motor, two maintenance-free 120 Ah batteries, and a user-friendly key system. This system enables simple and safe operation by controlling access and operating rights to protect against incorrect operation. The machine is ideal for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, battery life is significantly extended, and the integrated tank rinsing system makes it easy to clean the dirty water tank after floor cleaning. Walk-behind scrubber-dryer (60 l) with drive unit. Ideal for 1000 - 2500 m². Energy-saving eco! efficiency mode Proven double disc technology Gtodjx Hvvzopfx Abrou ■ Brush heads can be quickly installed or replaced. Powerful drive motor ■ Comfortable driving with infinitely variable speed adjustment (forward and reverse). ■ Preset maximum speed. ■ Operation via drive levers directly on the handle. With cleaning agent dosing system. ■ With on-board cleaning agent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width vacuuming mm 850 Fresh/dirty water tank l 60 / 60 Brush speed rpm 600 – 1300 Brush contact pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive traction motor Mains connection charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, images may vary as there are multiple items available Quantity 1x Kärcher walk-behind scrubber-dryer B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and mileage or operating hours. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more cleaning machines – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2018, Sub-spindle, Y-axis, C-axis FANUC 31i B-NT-SmartX control Turning diameter max 225 mm Turning length -656 mm Chuck Diameter -210 mm Main-spindle speeds 4'500 rpm Sub-spindle speeds 6'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Robot for workpiece loading Tool presetting device Misc. accessories Gsdpfxjvwkirs Abrjtu MARCELS MASCHINEN CH

Condition: used, Year of construction: 2017, Measuring machine Zeiss Dura Max, year 2017, without Erowa pallet, delivery and dismantling not included. Commissioned in 06/2018 and used for presetting a Sodick machine with ZK program. Gtodpfx Aboyh N Ngoreu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 36 m/min, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BT-40 spindle with BBT (BIG-PLUS) interface, 18.5 kW power and head-mounted cooler. High-pressure cooling through the spindle. CNC HEIDENHAIN TNC 530 with remote electronic handwheel. Belt chip conveyor. Tool presetting. CE standards. Installed in 2008. Machine only, without vice and without toolholders. Godpfx Asydlkbjbretu

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 22,000 rpm, number of axes: 5, This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information. • Head rotation: B 360° / A ±105° • Tool changer: 30 positions • Table size: 3100 x 1100 mm Gedpfxex D H Duj Abrstu • Optical scales: Yes • Options/Features: • Torque motor head • Laser tool presetting • Laser measuring system

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Machinery Description Document “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine Name: Printer Slotter - Machine Type: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 • Slotter fully overhauled • Partial Print Unit overhaul (new anilox and rubber rollers, new compensator, new bearings, new lubrication pump, refurbished ink pump) • Partial Feeder overhaul (new feeding wheels, new lubrication pump, main drive motor fully refurbished by CEAR, new CAM bearing) • Static Group fully overhauled • Complete sandblasting and repainting of all machine sections - Year of Partial Electrical Overhaul: 2025 Includes replacement of sensors / push-buttons / on-board wiring / solenoid valves / electrical control panels (machine groups). 2. Technical Specifications: - Dimensions: Machine length 4800 mm; Cylinder Circumference 1860 mm - Speed: Maximum rotation 5,500 RPM under optimal conditions - Minimum center distance (shafts): 450 mm - Sound Pressure Level (infeed section): 85 dB (A) - Sound Pressure Level (outfeed section): 82 dB (A) - Electrical Specifications: Power supply 400Vac 3-Phase 3P+PE Rated Power: 70 kW Absorbed Power: 57 kW Rated Current: 102 A Operating Current: 82 A - Production Speed: approx. 5,000 boxes/hour in synchro mode; approx. 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table with automatic lateral side guide and batch stop positioning - Print Unit with automatic print preset - Slotter Unit with automatic extension and preset (knife heads) and box height - Static Group 4. Safety: - The machine is equipped with safety guards on moving parts and is fitted with sensors to detect the opening of these guards. - Each machine section is equipped with an Emergency Mushroom Button and a Cable Pull Switch to stop machine movement. 5. Electrical Equipment: Gtedpoyifdvsfx Abreu - Main electrical cabinet housing control and distribution components - Control console/desk complete with operator touch screen panel 6. Components Not Included for Future Installation: - Cable tray and related accessories - Command and power cables between cabinet/console/machine units - Network bus cables Note: Possible purchase of Die Cutter and Stacker year 2008 (to be overhauled).

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: OKUMA, controller model: OSP - P300L, number of axes: 4, This 4-axis Okuma LB 3000 EX MYT was manufactured in 2008, offering advanced capabilities for horizontal turning. Ideal for complex machining tasks, this machine ensures precision and efficiency. Consider the opportunity to buy this Okuma LB 3000 EX MYT horizontal turning machine. Contact us for more information. Additional equipment • Bar Loader: Iemca Master mod. 880 33 P/R • Automatic Presetting: Yes • Gear Machining Software and Tools: Yes • Accessories: Chip Evacuator Machine Benefits Technical Machine Benefits • Max. Workable diameter: Ø 400 mm • Max. Workable length: 500 mm • Type: cnc lathe • Condition: used Gsdpsyalp Aefx Abrstu • State: optimal Extra Information Machine still under power

Condition: used, Year of construction: 2010, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm Godpfx Aox Ir Enobrjtu - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system • 80 mm automatic seat changer • Ultrasonic cleaning system Gsdpfxox Hx Rns Abrstu • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: used, power: 235 kW (319.51 HP), fuel type: diesel, wheelbase: 6,570 mm, color: blue, mileage: 191,699 km, first registration: 06/2016, gearing type: automatic, axle configuration: 4x2, suspension: steel-air, loading space length: 842 mm, loading space width: 252 mm, loading space height: 245 mm, driver cabin: other, emission class: euro6, Equipment: ABS, air conditioning, cruise control, low noise, parking heater, traction control, Loading compartment (L x W x H): 842 mm x 252 mm x 245 mm, Fabric seats, Interior color: black, Pneumatic leaf spring suspension, Digital tachograph, Low noise: CEE 92/97, Electronic Stability Program ESP, Anti-slip regulation ASR, Independent heating/automatic preset, Front comfort seats, Pneumatic front seats, Driver armrest, Heated driver seat, Radio/CD, Multifunction display, Bluetooth phone preparation, Lane keeping warning, Parking assist, Multifunction steering wheel, Driver lumbar support, Electric windows, Fog lights, Electrically adjustable and heated mirrors, Immobilizer, Central locking with remote control, Tinted windows, Underrun bar: Front, Sun visor, Twin rear tyres, Spare wheel, LED daytime running lights, Hub roof, Speed limiter, Emergency brake assist, Splash guard, BOX+TAIL LIFT Gtjdpoyhtpysfx Abrsu

Condition: new, Working area round 360 mm Working area quadrant 360 x 360 mm Working area bundle W x H 180 - 280 x 50 - 160 mm Cutting speed 20 - 100 m/min (infinitely variable) Saw blade dimensions 4,420 mm x 34 mm x 1.1 mm Hydraulic saw blade tensioning Multiple feed 500 mm Godpfeqrqvhjx Abrjtu Drive power 3.7 kW Machine size LxW 2,500 x 2,200 mm Machine weight 2,300 kg Standard equipment - Hydraulically controlled full-stroke double clamping system. - Driven by IE3 motor with inverter (PMSM, Euate IE4) - User-friendly NC touchscreen control with high-end system (NCIII CONTROL) - Feed rate display on the HMI (10" HMI screen) - Automatic chip conveyor - Automatic shuttle feed - IC board control for all electrical and hydraulic functions - Floating pendulum vice - Two-piece front vice - Stepless speed control by inverter - Hydraulic blade clamping - Roller bearings with hydraulically controlled carbide blade guide system - Automatic working height control through quick start sensor - Preset cutting counter with cut-off function - Nesting device for bundle cutting (hold-down device) - Power-operated blade cleaning brush - Saw blade monitoring with regard to standstill and blade breakage - Flushing hose for machine cleaning - Work light - Roller table with 2 m length - One M42 bi-metal saw blade - One set of tools and one toolbox

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light Godpfoxmhdnjx Abrjtu - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 134, 1 x Langhi Sistemi Srls single-head linear weigher. This weigher can be mounted on stand or operate as a table-top unit and is perfect for weighing small granular products such as coffee, pasta, rice, beans, or lentils. Technical specification: Model – LS RCT1. Serial number – 134. Date of manufacture - 2023. Weighing range - 50g-3000g. Speed - up to 20 drops/minute, depending on weight and product. Hopper capacity - 4.5 litres. Controls - PLC control with 7'' touch screen. Electric supply - 230 V / 50-60 hz / 1 phase. Features: This linear weigher can store up to 10 preset programs for different products. Condition: Gsdpfx Abowrnacsretu Excellent, the weigher has had very little use.

Condition: ready for operation (used), Year of construction: 2018, This 3-axis Mazak Quick Turn 200MA L was manufactured in 2018. It features a Kitagawa BB208A615 chuck, a cylinder, and a tie rod for 65mm bar passage. The machine includes a Mayfran side conveyor with a chip conveyor belt and an enhanced coolant system at 6 bar pressure. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 200MA L machine we have for sale. Contact us for more information about this machine. • Automatic contact tool presetting with breakage detection function - MT032 • Spindle line complete with 8" Kitagawa BB208A615 chuck, cylinder, and tie rod for 65mm bar passage - JB491 Gsdpfx Asx U Adbobrjtu • Mayfran side conveyor with chip conveyor belt - CV051 • Enhanced coolant, 6 bar pressure, 1.1 kW - CS335

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Gedpfx Aboxamqmorstu Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine does not include a chuck

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis Matsuura H plus 405 was manufactured in 2004. It features a pallet size of 500 × 500 mm, X/Y/Z-axis travel of 600 mm each, and a B-axis indexed at 1°. The spindle operates at 12,000 rpm with an ISO 40 taper. It includes a high-capacity tool magazine for 240 tools and supports 24 pallets with dual loading/unloading stations. Consider the opportunity to buy this Matsuura H plus 405 horizontal machining centre. Contact us for more information. • Pallet size: 500 × 500 mm • Number of pallets: 24 pallets • Loading/unloading stations: 2 • Tool magazine capacity: 240 tools • Probing system: Yes (touch probe) • Tool presetting: Yes • Tool breakage detection: Laser system Gtodox Utv Uopfx Abrju • Spindle taper: ISO 40 (DIN 69871) • Spindle speed: 12000 rpm • High-pressure coolant: 50 bar with paper filter • Machine condition: Available for any test / under power

Condition: used, Year of construction: 2014, Approx. 97 million prints Format: 94 x 64 cm (37 x 25 inches) installed in 2015 short-term available Technical data: PQC-S control console with touchscreen KOMORI KHS-AI system for makeready time optimization KOMORI Smart Feedback for density adjustment and waste reduction Automatic washing and ink presetting KOMORI PSP automatic format and thickness adjustment AMR (Automatic Make Ready) for preset job changes Quick start function for production Remote control of register and transfer cylinder adjustment Automatic sheet format adjustment Pneumatic stop fingers Mechanical and ultrasonic double sheet detection in the feeder S-APC: semi-automatic plate change (no plate bending required) KOMORI DSC high-performance sheet guide with exclusively double-size countercylinder and transfer cylinders KOMORImatic film dampening unit technotrans alpha.c dampening system Antistatic blower at the feeder head Gedpfjxb U Ayjx Abrstu Side blower (feeder) 2-zone suction belt delivery table Delivery with sheet troller/smoother Sheet brake with infinitely variable speed adjustment Blowing bars above the delivery pile Antistatic bar above the delivery pile Adjustable fans for precise paper travel and pile formation Weko AP160 printing powder device KOMORI PDC LII, online density measurement KOMORI PCC CIP3/4 data conversion software Max. sheet format: 640 × 940 mm Min. sheet format: 297 × 420 mm Max. print format: 620 × 930 mm Plate format: 700 × 945 mm (thickness: 0.30 mm) Blanket size: 800 × 955 mm (with bars) Substrate thickness: 0.04–0.6 mm Gripper margin: 10 mm Plate clamping margin: 45 mm Max. printing speed: 13,000 sheets/hour Stack height feed: 800 mm Stack height at delivery: 900 mm (*depending on paper, ink, and operating conditions) Length: approx. 8,169 mm Width: approx. 3,320 mm (without peripheral devices) Power consumption: approx. 53 kW / 50 Hz (without peripheral devices)

Condition: used, mileage: 49,900 km, power: 390 kW (530.25 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: soot filter, Vehicle number: 520065 Former non-binding manufacturer’s recommended retail price: €129,900 1 owner, accident-free, full service history, non-smoker ---- ASSISTANCE SYSTEMS * Lane change warning system INTERIOR * Side paneling EXTERIOR * Exterior sun visor OTHER EQUIPMENT * ZF intarder Further features -----Color/Paint----- * Chassis color: Anthracite Grey * Cab color: E1980WHTE CRYSTAL WHITE * Roof spoiler color: Crystal White * Side fender color: Crystal White Gtedpfx Abov A Ehmorou * Side skirt color: Crystal White * Mirror housing color CMS: Crystal White -----Tires/Wheels----- * Manufacturer: Goodyear * Front axle(s): 385/55R22.5 * Alcoa Dura-Bright aluminum wheels, 32 mm * F1: 385/55R22.5 GO AFMAXS 160/000 K Steering ABA * R1: 315/70R22.5 GO FMXDE 154/150 L Traction BBA 3P * RR: not applicable -----Equipment/Special Equipment----- * XG+ cab * Air-suspended cab * Passenger seat: cinema & table, fabric upholstery * Adaptive cruise control with FCW and AEBS-3 * Front axle: 8.00 t, parabolic, 163N * Emission standard: Euro 6 * Automated transmission, TraXon, 12 gears * Standard component layout * DAF Connect * Warranty Plus Drivetrain: 3 years/500,000 km * Climate package * Signal horns, 2 sets * Two LED spotlights for cab rear wall * Windscreen with sun protection film * Laminated glass with sun protection film * DAF digital vision system * DAF Corner View * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for XG+ cab * Extended side fenders * Driver’s seat: Super Air * Driver’s seat with swivel base * Refrigerator and drawer * Mattress for DAF Relax Bed * Curtains with partition curtain * Integrated stationary air conditioning * Accessory power supply: Standard + 2x 40 A * ECAS remote control with extended functions * FMS connector, extended and prepared * Digital tachograph, VDO 1C, Version G2V2 * Speed limiter preset: 90 km/h * Antennas: DAB radio prep., 2x mobile, GNSS extra: CB * Predictive cruise control * Turn assist * Rear: SR1347 air suspension * Axle load monitoring * MX-13 engine, 390 kW/530 HP, cab emblem: 530 * ECO Performance * 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 * Rear axle ratio: 2.40 * Mechanical differential lock * Wheelbase 4.00 m / rear overhang 0.99 m * EAS unit right, rear overhang 85 l, mudguard left * Aluminum compressed air tanks * Tool box: 675 mm left + 340 mm right, height 620 mm * Fuel tanks left and right * One wheel chock * SAF S36-20, cast iron, 150+40 mm, low-maintenance * Fixed steering right, no first right * Alternator 130 A, batteries 2 x 210 Ah AGM * Dual-circuit hydraulic system, high/low pressure mounted ---- Subject to prior sale and errors. The vehicle description serves solely for general identification and does not constitute a warranty as defined by sales law. Exact equipment details can be obtained from our sales staff. Please contact us.

Condition: used, Big Bag filling and weighing station Completely recoated Featuring platform and stairs Gtjdpfx Ajyf A Hiobrou Complete with electronic weighing control Inflatable sleeve for dust-free big bag filling Butterfly valve closes at preset weight Product-contacting parts made of stainless steel See our other advertisements VMA Wekerom

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,063 h, spindle speed (max.): 7,000 rpm, spindle motor power: 11,000 W, number of axes: 6, This 6-axis Biglia B.436-Y2 horizontal turning machine was manufactured in 2016. It features a maximum bar diameter of 36 mm, spindle speed up to 7000 rpm, and motor power of 11 kW. With rapid traverse rates up to 30 m/min and a comprehensive toolset including high-precision boring bar holders and radial drilling heads, this machine offers robust capabilities for complex machining tasks. If you are looking to get high-quality turning capabilities consider the Biglia B.436-Y2 machine we have for sale. Contact us for more information. • Max. bar diameter: 36 mm • Aiming tube: 37.5 mm • Spindle nose: 115 mm • Draw tube: 46 mm • Continuous motor power: 7.5 kW • Continuous power available from: 1700 rpm • Max. torque: 62 Nm • Cylinder thrust area: 75 cm² • Cylinder stroke (max.) for clamping operation: 26 mm • Longitudinal slide (Z1 axis) • Max. stroke: 300 mm • Ball screw diameter/pitch: 25/10 mm • Max. rapid traverse: 30 m/min • Cross slide (X1 axis) Gtsdpfjx D Ep Njx Abrou • Max. stroke: 85 mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Vertical slide (Y1 axis) • Max. stroke: 50 (+25/-25) mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Longitudinal slide (Z2 axis) • Max. stroke: 300 mm • Ball screw diameter/pitch: 25/10 mm • Max. rapid traverse: 30 m/min • Cross slide (X2 axis) • Max. stroke: 85 mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Vertical slide (Y2 axis) • Max. stroke: 50 (+25/-25) mm • Ball screw diameter/pitch: 25/5 mm • Max. rapid traverse: 15 m/min • Connected load: 11 kW / 40 kVA / 70 A / 3 x 400 V • Operating pressure: 4.8–6.9 bar • Max. air consumption (supply): 0.10 m³/min (guideline) • Footprint (with chip conveyor) L x D approx.: 3682 x 1430 mm • Overall height (max.): 1900 mm Additional equipment • High-precision boring bar holder Ø25 mm with internal coolant (Oesterle) • Precision reducing sleeve D=25/16 (Oesterle) • Precision reducing sleeve D=25/12 (Oesterle) • Precision reducing sleeve D=25/06 (Oesterle) • Collet chuck ER20, shank D=25 mm (Oesterle) • Precision parting-off holder for parting tool SH26 mm, left-hand, height 70 mm • Radial drilling and milling head ER20 with internal coolant, 1:1, 6000 rpm (MT) • Radial drilling and milling head ER20 with internal coolant, 1:2, 12,000 rpm (MT) • External turning tool holder, 1st side 16x16 / 0088-00004 (Oesterle) • Angled external turning tool holder, 2nd side 16x16 / 0088-00006 (Oesterle) • High-pressure pump 40 bar with replaceable filter cartridge • Coolant gun including its own pump • Collet chuckThe machine ran with cooling lubricant! Brand: Castrol Type: Hysol MB 50The tension of the main and counter spindle is hydraulic and adjustable by pressure! A collet chuck with stroke limitation is mounted on the counter spindle! The tool presetting is a measuring probe that is only used to measure the tools! It also functions properly! The cooling lubricant pressure is 7 bar and can be increased to a maximum of 40 bar via M code! The workpiece removal is permanently installed in the machine and can be freely programmed! The bar loading magazine is included! According to the operating instructions, the bar loader can handle 1500 mm

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm Godpfsxnlflox Abrstu 1 set for line boring in system.

Condition: used, Year of construction: 2019, Autoplate XL Preset Plus in feeder Preset Plus in delivery Alcolor with Technotrans CombiStar CAN AirStar Pro CleanStar Compact Wallscreen Prinect Inpress Control Prinect Press Center XL2 Prinect Production Manager Color Fast Solution Hycolor ink InkStar Gsdpfx Asxwy Ersbrjtu

Condition: like new (used), Year of construction: 2005, approx. 170 million impressions speed: 15,000 sheets/hour PQC AMR APC Gjdpoyftw Ssfx Abretu Automatic Preset Komorimatic All washing devices Technotrans Cooling Unit Chromed cylinder