Used Pretreatment for sale (32)

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun Iodpjwf Dpgefx Agzotr A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: excellent (used), Year of construction: 1989, operating hours: 1 h, machine/vehicle number: 8928, Hello I have for sale a pressure tank for impregnation AUTOCLAW. The machine in very good condition fully operational. The machine includes a tank, pumps and carts that transport the goods to the tank. The length of the tank itself is about 15m, the inner diameter of the tank is 160cm, and the width of the cart transporting the goods is 100cm. The machine is roofed. Disassembly of the machine on the customer's side. We invite you to purchase. More information by phone. The price of the machine is the price for export. Isdjud Sbkspfx Agzetr

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m Itedpfxoxa Expo Agzor 2.2. Labeling area with air-conditioned roof and conveyor belt 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: refurbished (used), Year of construction: 2021, number of print heads: 4, DTG printer Brother GTX 600 Year 2021 Machine in great condition, overhauled and followed by Brother dealer Prints : Around 40000 Main body, computer and humidifier included Machine cleaned before shipping Ink levels around 40% (2+) Maintenance cleaning full Included with Brother GTX 600 : 20L Dark pretreat Premium, Dark Cotton by SK Color ; 10L Light pretreat Premium, LIGHT Cotton by SK Color ; 100 sheets DTF 40x50cm ; 1 Kg powder DTF Premium. Delivery not included Possible of making lot with : - other GTX 600 ou PRO BULK machines - Pretreat machines Ijdsvdkdcspfx Agzstr - Tunnel dryer Chiossi & Cavazzuti

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 20,000 mm, Transport Conveyors LISEC Transport Unit 3300 x 4000 mm LISEC Transport Unit S 3300 x 4500 mm LISEC Transport Unit 3300 x 6800 mm LISEC Transport Unit Mobile 3300 x 2800 mm Year: 2010 Pyrosil ST-SystemSt 1000 HD -1B System 500 HE (Pyrosil application for UV Ink) Pyrosil System 500 HE (Pyrosil application for UV Ink) Primer Station 500 HE LISEC Exhaust Air Pretreatment System LISEC System Control S-LTD-235 Flame Parameters: Berner Speed 150 mm/sec Iodpfxevy D Tio Agzstr 7.4 Hz Frequency at FU 2 Flows Air Setpoint 400 l/min Gas/Air Ratio 1:21 Precursor 0.3% Primer parameters: Primer speed 300 mm/sec, 14.8 Hz frequency at frequency converter Flows: 2 Reservoir pressure: 1 bar Atomizer pressure: 2.0 bar Spray volume: 25 ml/min per spray channel Control pressure below 6 bar has no influence on the spray volume. Only the valves for the spray heads will be opened.

Condition: used, Year of construction: 2010, functionality: fully functional, Wagner Powder painting equipment for sale! Powder coating device, year 2010 consisting of: Booth: Prima Cube 16000 Powder supply: Powder Center Powder recovery: Cyclon Filter 16000 Movement generator: KHG 350 Production process configurations INCLUDING: I. Presumes Maximum size of parts: LxWxH=2600x400x1850 mm II. Equipment Technological Conveyor automatic speed V=1.2 mtrs/min. Speed regulation between 0.5-2.5 mtrs/min 1. Pretreatment Stand MNA-3-LPG, total size 16,7 mtrs Enter size L=2,5 mtrs a. Washing, degreasing and phosphating; L=3,6 mtrs -number of spray frames – 10 -number of nozzles in frame – 18 -number of nozzles in total – 180 -delivery of the pump – 162 m3/h -power of the pump – 15 kW -vessel 4 m3 for active liquid -inner heat exchanger with LPG burner – 160 kW -temperature 500C -mechanical oil separator - solution filter -the dosing system, membrane pump with regulator -washing time – 3 min b. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec c. First rinsing; L= 1,2 mtrs -number of spray frames – 4 -number of nozzles in frame – 18 -number of nozzles in total – 64 -delivery of pump – 38 m3/h -power of the pump – 3 kW -vessel 1,5 m3 for water -first rinsing time – 1 min c. Dripping zone L= 3,1 mtrs -time of dripping – 2 min 30 sec d. Fine rinsing; L= 1,28 mtrs -number of spray frames – 3 -number of nozzles in frame – 18 -number of nozzles in total – 54 -delivery of pump – 33 m3/h -vessel 1,5 m3 for water -power of the pump – 3 kW -one extra spray frame -number of nozzles in frame – 18 -fine rinsing time – 1 min e. Dripping zone L= 2 mtrs -time of dripping – 1 min 40 sec Three openings to connect to exhaust system with three ventilators Operating space made of stainless steel. Pipes made of PVC or S/S. 1 unit 2. Automatic Dryer after water AST-1-KLPG: - operating space dimensions LxWxH=7000x3000x2800 - air curtains each side to avoid heat losses Itedoww Adtopfx Agzsr - one indirect heat exchanger heated with liquid petrol gas to produce 200 kW of rated power - three blowers 6000 m3/h of air delivery - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - drying time 10 min 1 unit 3. Automatic Curing Oven APT-2-KLPG for curing powder paints - operating space dimensions LxWxH=10200x3600x2800 - air curtains on one side to avoid heat losses - two indirect heat exchangers heated with liquid petrol gas to produce 300 kW of rated power, of each - eight circulation blowers, capacity of each 6 000 m3/h - two openings to connect to exhaust system - temperature sensor and temperature regulator - overheating sensor - circulation sensor - operating space made of zinc plated steel - thermal insulation 200 mm thick - curing time 25 min 1 unit 4. An overhead rail conveying system ATR-ADAX, for the paint shop including the following: • straight track with hangers L=400 mm 146 mtrs • drive station 2 pc • tension station 1 pc • chain lubrication station 1 pc • drawing of the track supporting structure 1 set

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: GE-KEK-100L, 🔧 Manual Spray Chemical Pretreatment Cabin – 1.6 × 1.6 × 2.2 m – 800 L • Cabin dimensions: 1,600 × 1,600 × 2,200 mm • Chemical tank: ~800 L • Pump/spray unit: ST 84 HE • Heating elements: 2×6 kW (water temperature: 45–60 °C) • Motor: ~1.5 kW • Power connection: 3×380/220 V, IP68 protection • Manual spray operation, automated circulation, rinsing. Closed system for safe chemical handling • Spring tray technology – for direct pretreatment prior to powder coating Iedpfxew Nvyko Agzetr Condition: Excellent, complete unit, EU standard control, documented operation Price: €10,900 + VAT