Used Profile Sanding for sale (7,539)

Condition: good (used), Machine configuration: First electronic cross-belt Gedpfjz D Hr Aox Am Eobw Second roller belt Third electronic superfinishing buffer belt Fourth electronic cross-belt In-line machine with vacuum system

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° Gbsdjwgc D Sopfx Am Esw - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: new, Year of construction: 2025, with hinged veneer edge grinding device, for the adjustment of the chip removal oscillating sanding belt Gbjdpfxspl Ugaj Am Esw Aggregate swivels up to 45 motor power: 2,2kW belt size: 3000 x 200mm table size: 930x350mm weight: ca.360kg roller: 120mm Central connection for suction 140mm Included: - Miter fence - undercarriage - Grinding shoe rotatable - can be used from 3 sides - contact roller 65mm - exchangeable - extendable table extension - feed console - CEE socket for feed unit

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Gedped H Sc Eefx Am Eobw Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: new, Bernardo Belt Sander MS 75 x 2000 S-2 Technical Specifications Belt dimensions: 75 x 2000 mm Belt speed: 14.5 / 29 m/s Contact wheel Ø x W: 200 / 80 mm Planing sanding table: 460 x 75 mm Dust extraction connection Ø: 100 mm Motor output S1 100%: 1.5 / 2.2 kW Motor input S6 40%: 2.2 / 3.0 kW Voltage: 400 V Gjdpfx Asd Du S Ujm Esbw Length: 1080 mm Width: 440 mm Height: 1000 mm Weight approx.: 67 kg Scope of delivery • Sanding belt K 80 • Foldable protective shield • Sanding and support table • Workpiece stop • Dust extraction nozzle • Motor circuit breaker • Rubberized sanding roller • Graphite lining • Separate on/off button • Base frame

Year of construction: 1996, condition: used, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copying device Gbjdpfx Amod Dzlio Eow -Equipment: 1 grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Dimensions: 1200/1420/H1520 mm -Weight: 656kg Compact linear milling and grinding machine for any profile on strips and panel edges. Extremely short changeover times to a stationary grinding machine. Corner processing on MDF and solid wood workpieces with different radii (R = 1 to R = 30 mm) and corner angles. Manual creation of corner angles from 25 to 170 degrees. The grinding process for corner processing takes place in one clamping (approx. 10 seconds).

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, Godpfx Amodykwle Eobw max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader)

Condition: new, Akyapak Akbend Ring Profile Bending Machine APK 50 Description • Lower roller adjustment, hydraulic – both lower rollers can be adjusted • Suitable for horizontal and vertical operation • Control panel (the position of the lower rollers is displayed) • Standard rollers included • 3 driven rollers • CE marking / Declaration of Conformity • Operating manual Technical Details • Bending capacity: see performance table • Bending speed: 4.4 m/min • Roller diameter: 157 mm Gsdpfjd Er S Asx Am Eebw • Shafts: 50.0 mm • Total power consumption: 1.1 kW • Weight: 500 kg • Dimensions L-W-H: 950 x 700 x 1220 mm

Condition: new, pipe diameter: 10-114: (2x) 50 x 940grinding belt speed: 3-22 Gbjdpfx Amed Ab U Ds Ejw

Condition: used, TECHNICAL DETAILS - Ø screen : 600 [mm] Gsdpfxeuhb Nfe Am Eobw - Strokes (X/Y) : 200 / 100 [mm] - Magnification : 10X, 20x, 50x, 100x - power max : 1 [kW] - floor space (L x D x H) : 1100 x 1720 x 2100 [mm] - weight : about 400 [kg]

Condition: good (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: CA90H2 PIPE BENDING ROLL, shaft diameter: 90 mm, roller diameter: 260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 8 rpm, overall weight: 1,000 kg, total length: 1,260 mm, total width: 1,000 mm, total height: 1,260 mm, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, roll diameter: 260 mm, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 Gedpfx Aewkrr Tsm Ejbw SHATS OUTPUT SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 - 78 – 90 – 116- CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE CONTROLS CENTRALIZED DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTON MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL/HORIZONTAL. SAFETY AND EMERGENCY STOP EQUIPMENT INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS IN ORIGINAL ALONG WITH THE MACHINE WEIGHT 1000 KG DIMENSION 1260 X 1000 X H 1260 MM

Condition: new, Year of construction: 2024, shaft diameter: 80 mm, Profile bending machine AHB 100 - with universal rollers - Three roller drive - Digital display left and right bending axis - Hydraulic lateral rectifier - Hydraulic drive of the bending rollers - Vertical and horizontal operation - built according to CE standards - Bending capacity flat bars max. 12 x 20 mm - Flat bent 200 x 40 mm - U profile inside and outside 180 mm - Angle profile web outside 100x100 mm - Angle profile web inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm Gbedpfx Ajvaw Elsm Eow - Roller diameter 315 mm - Bending speed 5 m/min. - Motor power 11 KW - Weight 2600 kg - module max Wcm3 -400 Volt 50 Hz. 3 ph. -1950x1600x2100 mm

Condition: refurbished (used), EVERY TYPE OF CELASCHI FEEDING CHAIN FULLY RECONDITIONED Godov Hmyxepfx Am Esbw

Condition: new, functionality: fully functional, Year of construction: 2024, shaft diameter: 50 mm, roller diameter: 155 mm, overall weight: 400 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Capacity (kW): 1.5 Voltage: 400 Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Gsdpfx Aowt Sy Aom Eobw Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units in stock, foot pedal included.

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Gedpowvt I Hjfx Am Ejbw Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Gedpfx Amjx Rv Dye Esbw Location: Flörsheim

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Gbedpfeyhcabox Am Esw Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile Gsdpfexf Uudox Am Eebw - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: good (used), Year of construction: 1996, double-sided top and bottom sanding with sanding shoe and dust brush max. sanding width 300 mm max. sanding height 200 mm year of manufacture 1994 with CE mark Gbodpsxfl Eajfx Am Eew

Condition: good (used), total length: 3,835 mm, Technical Data for Steel Beam: Manufacturer: Stow Type: Pal Rack NS Scope of delivery includes: Gbjdpfx Amsw Niwvs Esw 01x steel beam, used Material color: orange Box section: 100 x 50 mm Bracket: 4 HK (hooks) Total length: 3,835 mm Note: A plate has been welded onto the steel beam at a length between 2,700 - 2,800 mm. (Dimensions: approx. 200 x 110 x 50 mm (LxWxH)) As this is used equipment, scratches, damage, welds or traces of rust may be present! General information about the item: This item is offered for collection only. Transportation or shipping beyond this point will incur additional costs, which can be quoted separately depending on the delivery location and order volume.

Condition: used, Year of construction: 1996, Technical details: Gbsdpfew S Hy Hsx Am Eow grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm total power requirement: 50 kW dimensions of the machine ca.: 9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser B-axis dividing head *

Condition: used, shelf height: 6,000 mm, Technical data for pallet rack upright: Racking system: Dexion Type: Speedlock P90 Scope of delivery includes: 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: 100|25 Gedpfow I D Utsx Am Ejbw Profile dimensions: P 100 x 100 x 2.50 mm Including horizontal and diagonal braces, footplates The uprights are pre-assembled (bolted truss construction) Height: 6,000 mm Depth: 990 mm General information about the item: This item is only offered for collection. Any requested transport or shipping of this item will incur additional costs, which can be specified depending on the delivery location and required scope of delivery upon request.

Condition: excellent (used), The Formid Limited is a roll forming line with an electrically extendable support system for forming sets up to 800 mm. The drive is manual via a bevel gearbox. It can be combined into a single electric system and measures the width of the spacing. Mounted on 45 mm shafts, 12 keyways, shaft distance 145 mm. Axle spacing 250 mm. Shaft spacing minimum 200 mm from each other and 800 mm apart. Powered by a 380-volt electric motor with 15 kW. The system is suitable for profiles with frequently varying center widths. It features center roller supports to maintain the lower layer of the steel strip, which in turn supports the base strip substrate in a defined profile. The system also includes 16 stations. Gbsdowxv Izepfx Am Esw

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH tertiary impact crusher is an advanced crushing machine that provides high efficiency in rock crushing and sand making processes. It delivers superior performance, especially in crushing medium-hardness materials with low abrasive properties. This machine stands out with its ability to produce fine, cubic-shaped material down to 0.5 mm in a single pass. It is an ideal choice for producing high-quality aggregate in sectors such as construction, ready-mix concrete production, and asphalt applications. Tertiary crushers ensure that the material is produced in homogeneous sizes during the crushing process and enable more efficient utilization of the material thanks to their high reduction ratio. With these features, the CONSTMACH tertiary crusher is also frequently preferred as a “sand making machine” in stone crushing plants. Thanks to its high-speed rotating rotor system and adjustable crusher plates, the material can be crushed to the desired fineness. The hydraulic opening and adjustment mechanism allows operators to perform maintenance and replacement operations safely and quickly. Replaceable wear parts ensure long-term use and low operating costs. Furthermore, its design, suitable for operation in closed-circuit systems, provides consistent quality across different product sizes. Tertiary Crusher Technical Specifications MODEL: CTC - 1275 Rotor Diameter: 1,100 x 750 mm Rotor Speed: 800 - 900 rpm Gbedsxqgtvopfx Am Eow Maximum Feed Size: 100 mm Capacity: 60 - 80 t/h Motor Power: 110 kW Weight: 9,500 kg MODEL: CTC - 1210 Rotor Diameter: 1,100 x 1,000 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 120 mm Capacity: 80 - 135 t/h Motor Power: 160 kW Weight: 12,500 kg MODEL: CTC - 1212 Rotor Diameter: 1,100 x 1,200 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 120 - 170 t/h Motor Power: 200 kW Weight: 15,500 kg MODEL: CTC - 1215 Rotor Diameter: 1,100 x 1,500 mm Rotor Speed: 800 - 900 rpm Maximum Feed Size: 150 mm Capacity: 230 - 250 t/h Motor Power: 250 kW Weight: 18,500 kg Why Choose CONSTMACH Tertiary Crushers CONSTMACH offers reliable solutions in crushing, screening, and concrete production equipment that meet international standards. Our tertiary impact crushers increase your operation's production efficiency with high quality, durability, and low maintenance costs. We are always by your side during the after-sales process with our spare parts and technical support services. If you are looking for a long-lasting, energy-efficient, and high-performance stone crushing machine, CONSTMACH is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: good (used), Scope of delivery includes: 01x upright protector, used Material color: yellow - painted Overall height: 1,190 mm Overall width: 122 mm Internal width: 110 mm Suitable for frame profile: 110 mm Total depth: approx. 60 mm Material thickness: 6.00 mm Borehole diameter: 13 mm Hole spacing: 650 mm Gsdpow Ngzfsfx Am Ejbw Weight | per unit: approx. 12.69 kg Number of holes: 02 pcs. Including fastening material consisting of: 02x hexagon bolt M10x35 mm 02x hexagon nut M10 04x washer M10 General information about the item: This item is only offered for collection. Any transport or shipping of this item is subject to additional costs, which can be requested from us separately depending on place of delivery and scope of delivery.