Used Push Lawn Mower for sale (1,349)

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Guodpfx Aoz I Ig Noihjh Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 2024, functionality: fully functional, Technipes bag packaging line, type TE.2/50 G/T-500 + LC/Futura, with safety fencing, serial number CO.23.088, consisting of: Technipes Tecno/500 bag erecting/filling unit Technipes LC1 weighing cell TE.2/50 G/T-500 weighing and dosing system with a filling range of 10 - 25 kg Fischbein model 100 bag sewing machine with bag infeed Evolabel model T63 bag labeling/labeling machine various conveyor belts Siemens Simatic HMI touch control panel Guodpez Iptdofx Aihjh bag magazine safety fence with doors Neroco metal detector on conveyor belt conveyor belt and 1 section of roller conveyor located above the palletizing installation, lot 44 control cabinet year of construction 2024 400 Volt Dimensions approx. 320 x 500 x 210 cm Year of construction 2024 Technipes machine cell with enclosed housing, safety fencing, and integrated conveyor belts. Details: Brand: Technipes Design: aluminum frame with transparent panels and multiple access doors Safety: safety fencing with yellow uprights Transport: integrated conveyor belts/roller conveyors Included: control cabinet with push buttons, pneumatic filter/regulator units, and hoses Markings: Ausloos Verpakkingstechniek; NENCO FOOD GROUP Condition: used

Condition: used, Year of construction: 2001, functionality: fully functional, Profile Bending Machine SAF Curvatrici (TUWI) DS 60 HV – Top Condition & Huge Tool Package Description: For sale is a high-quality profile bending machine, type SAF Curvatrici (TUWI) DS 60 HV, from the first owner. The machine was purchased new by us in 2001 and has been in our possession ever since. It is fully operational and can be demonstrated under power after prior consultation. Special highlight – Modernized control system (08/2019): The control system was completely overhauled and modernized by a specialist company in August 2019. Now, 10 different feed sequences can be programmed. After a programmed value is reached, the next value is automatically approached by pressing the button again (value input in ascending order). Technical data & equipment: • Shaft diameter: 50 mm (for all three axes) • Acceptance height: 115 mm • Additional equipment from factory: 2 RCD correction rollers for bending angle iron (R/L). The original, lateral and height-adjustable shafts (38 x 250 mm) are also included. • Special modification for transport: Specially manufactured base frame for transport including four height-adjustable support plates. • Additional device for angle iron: A 10 mm thick plate was mounted on the top side. An additional hydraulic cylinder can be attached here, which pushes the vertical flange extremely close to 90° during bending (adjustable pressure depending on the angle). Note: The cylinder is not included in the standard price, but can be requested separately. Enormous scope of supply (Extremely many tools included!): The biggest advantage of this offer is the extremely extensive tool package, which is completely included in the price: • Standard tools: Complete set according to the machine’s scope of supply • 18 different roller sets: According to the list from Ø 8 mm to Ø 33.7 mm • Special tools for angle iron (according to the list) • Special tools for flat steel (light & heavy axis) Gsdpfx Aiez Ix Ukjheuh • Special tools for square and rectangular tubes • Special tools for diagonal square material • Documentation: Original operating manual is fully available Note: The machine will only be sold as a complete package together with the complete tool set according to the attached list. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documents. Subject to prior sale.

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° Gedpfx Aoz Alfueiheuh • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm Godpfxjqlckpj Aihouh - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2004, Stedler SAM-BA-MAT E 500 Shrink Wrapping Machine, AM-BA-MAT E 500 Shrink Wrapping Machine Functional Description The machine is used for individually or collectively wrapping packages with polyethylene shrink film. * Operating principle: Semi-automatic and pneumatic. * Process: The product is manually fed in via a format slide; all subsequent steps (banding, further transport into the shrink tunnel) are carried out automatically. * Sealing process: A continuously heated safety sealing device separates and seals the film. A Teflon cloth prevents the film from sticking to the sealing blade. Placing the film rolls * Positioning: The rolls are placed on pairs of support rollers, both above and below. * Adjustment: Adjustment rings limit the film laterally with an allowance of approximately 1–2 mm (adjustment using an Allen key). * Preparation: The film ends are guided through the sealing device. By pushing the infeed carriage forward and backward once, the separating sealing process is pneumatically initiated, creating the so-called film curtain. Godpetzbkkjfx Aiheuh * Film material: Processes two rolls of flat shrink film made of polyethylene. * Film thickness: The recommended standard thickness is 40 µm (micrometers). * Film alignment: The rolls are fixed with adjustment rings, with a lateral play of 1–2 mm to be set. * Film width: The maximum width is 210 mm. * Control: The machine operates pneumatically and is activated via a manual slide. Machine data Manufacturer: Stedler Type: SAM-BA-MAT E 500 Operating voltage: 230 V Connection value: 0.75 kW Operating principle: Semi-automatic and pneumatic [Image content] Dimensions (L x W x H): 1500 x 1170 x 1300 mm Year of manufacture: 2004 Sealing & Film specifications Maximum temperature: 250 °C Sealing readiness: approx. 1.5 s Film material: Flat shrink film made of polyethylene (PE) [Image content] Film width: up to 210 mm Film thickness: 40 µm (micrometers) More items in other sizes – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2008, lifting height: 16,200 mm, fuel type: diesel, Weights Empty weight: 8.946 kg Functional Lifting capacity: 680 kg Working height: 1.820 cm Dimensions of cargo space: 478 x 229 x 315 cm CE mark: yes Guodpfx Aisx Uyw Eshsh Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS5390 Year of build: 2008 Condition: Used Data: Max. working height: 18,15 m Platform height: 16,15 m Movable up to working height: 18,15 m Lifting capacity: 680 kg Platform dimensions LxW: 4,78 x 1,83 m Platform length pushed out: 7,36 m Transport dimensions LxWxH: 4,78 x 2,29 x 3,15 m indoor use only: no Drive type: Diesel Empty weight: 8.946 kg Special features: All-wheel drive, attachment points for restraint systems (PSA), supports, double extension.

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Gusdpfsy Ehrxjx Aihjh Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2016, lifting height: 5,770 mm, fuel type: electric, Empty weight: 1.520 kg Lifting capacity: 230 kg Working height: 777 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: FR Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Optimum 8 AC Year of build: 2016 Condition: Used Data: Max. working height: 7,77 m Platform height: 5,77 m Lifting capacity: max. 230 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 1,68 x 0,71 m Platform length pushed out: 2,59 m Total dimensions LxW: 1,89 x 0,76 m Height transport position with railing: 2,00 m Height transport position without railing: 1,14 m Movable up to working height: 7,70 m Guedpfx Aisznvf Ashjh Ground clearance: 0,06 m Drive type: Battery Empty weight: 1.520 kg Special features: white tires, anchor points for restraint systems (PPE) available. Location: 41468 Neuss immediately available

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Gjdjzc Nplopfx Aihsuh Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request!

Condition: used, This listing is for the Eppendorf Centrifuge 5420 The unit is in full working condition and is ready for immediate use The Eppendorf 5420 is a non-refrigerated microcentrifuge designed for routine molecular biology workflows—especially spin‑column-based DNA/RNA purification, gel extraction, and PCR prep. It offers outstanding performance while saving precious bench space. Key Features & Design Highlights Compact Footprint: Measures just 24 × 35 × 22 cm (W × D × H), or approximately 9.4 × 13.8 × 8.7 in., making it ideal for crowded lab benches. High-Speed Performance: Reaches up to 15,060 rpm, generating a maximum relative centrifugal force (RCF) of 21,300 × g. Godpfsxhd Hbsx Aihjuh Large Capacity with Flexibility: Comes standard with an aerosol‑tight rotor accommodating 24 × 1.5/2.0 mL tubes. Optional adapters support 0.2, 0.4, 0.5 mL tubes, 0.6 mL BD Microtainers, as well as a rotor for 32 × 0.2 mL PCR tubes or four 8‑strip PCR sets. Ergonomic Controls: Soft‑touch lid closure—one-finger operation. Automatic lid opening at the end of runs to minimize sample warming and ease access. One‑push short‑spin key—perfect for quick spins without holding the button. Easy‑clean keypad and large, bright LCD display. Low Noise & Safety: Quiet operation at

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series The units are in full working condition and are ready for immediate use Gujdpfx Asyt Naxoiheh The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Condition: used, This listing is for a IKA Euro-star 100 D S002 Overhead Stirrer The unit is in full working condition and is ready for immediate release The IKA Eurostar 100 D S002 is a powerful laboratory overhead stirrer designed for a wide range of applications, ideal for mixing volumes up to 100 liters of water (H₂O). Engineered for precision and durability, it’s perfect for laboratories needing reliable and consistent mixing performance. Specifications Speed Range: 0/30 to 1300 rpm Maximum Stirring Capacity: 100 liters (H₂O) Maximum Viscosity: 70,000 mPas Maximum Torque: 100 Ncm Motor Rating Input/Output: 186 W / 136 W Motor Type: Maintenance-free brushless DC motor Chuck Range: 0.5 to 10 mm Protection Class: IP 42 Interfaces: RS 232 and USB for control and data documentation Dimensions (W x D x H): 86 x 208 x 248 mm Weight: Approx. 3.9 kg Power Supply: 230 V, 50/60 Hz Key Features Gujdpfx Aioxv Dg Rshsh Digital TFT Display: High-visibility screen for real-time parameter monitoring Removable Wireless Controller: Enhances ease of use and flexibility Microprocessor-Controlled Speed Regulation: Automatically adjusts speed to maintain precision within the set range, even with changes in sample viscosity Integrated Torque Trend Display: Enables real-time monitoring of viscosity changes Safety Systems: Built-in overload and anti-stall protection with automatic shut-off Quiet Operation: Low-noise performance for lab comfort Push-Through Agitator Shaft: Allows quick removal and easy cleaning Error Code Display: Notifies users of system alerts or issues Constant Speed Maintenance: Ensures uniform mixing, compensating for viscosity fluctuation

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm Gjdpfxou Iww Uo Aihsuh workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Gedpfx Aijvu Hd Tshsuh Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Year of construction: 2014, condition: good (used), Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The device is manufactured by RR Mechatronics and is often used in combination with hematology analyzers from Sysmex. Purpose and Function Guedpfx Aioyk U Dwshsh The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a single unit, with all components located within a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections, as well as the ON/OFF switch, are located on the rear of the unit. All components that can be serviced or replaced by the user are accessible via the front door. The carriage for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be optionally attached to three sides of the unit. Performance Characteristics and Capacities The RPU-2100R focuses on optimizing reagent management for high-throughput laboratories: Reagent concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per concentrate: With a 10L container, up to 8,250 blood counts per month can be performed without changing the reagent. With a 20L container, up to 16,500 blood counts per month are possible. Shelf life: The mixed reagent has a shelf life of 30 days after opening. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog number: NARP109010 External connections Power supply, Euro plug Ethernet/USB (only NARP109010) RJ45/USB-B RS-232 (only NARP109000) 9 Pin SUB D connector External connections (liquids) Water connection: G ¾" inch thread Reagent output connection (4x) Push-in hose connection, outer diameter 6 mm Waste connection (1x) hose sleeve, hose inner diameter 12 mm Reagent concentrate Maximum size: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Reagent dispensing rate: 0.5 liters/minute, 6 minutes max. (with full supply and overflow container and new pre-filter) 1 liter/minute, 2 minutes max. Filtration Air filter, bacterial filter, pore size 0.2 µm Liquid pre-filter, particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter, bacterial filter (sterilized), pore size 0.2 µm, self-venting System dimensions Width: 500 mm Height: 700 mm Depth: 430 mm Weight: approx. 50 kg Water container volume: 2.5 liters Supply container: 2.5 liters Mixing container: 0.6 liters Overflow container: 0.6 liters Language selection available: de, en, es, fr, hu, it, nl, sk, sv (expandable) Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: used, Year of construction: 2013, lifting height: 3,570 mm, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 10.000 kg Functional Guedpfsv Timbjx Aihsh Lifting capacity: 750 kg Working height: 1.940 cm Dimensions of cargo space: 483 x 249 x 273 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: HAB Model: S195-24D4WDS Year of build: 2013 Condition: Used Data: Max. working height: 19,35 m Platform height: 17,35 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Platform dimensions LxW: 4,52 x 2,37 m Platform lenght pushed out: 7,22 m Transport dimensions LxW: 4,83 x 2,49 m Height transport position with/without railing: 3,57 / 2,73 m Movable up to working height: 19,35 m Ground clearance: 0,25 m Only indoor using: no Drive type: Diesel Own weight: 10.000 kg Special features: black tyres, generator 24V - 230 V, all-wheel drive, outriggers, soot filter, attachment points for restraint systems (PSA).

Condition: used, Year of construction: 2017, Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data - Manufacturer: Jakü - Model: EGA-CARBO - Year of manufacture: 2017 - Machine type: deaeration and carbonation unit for water - Capacity: 120 - 12,000 l/h - Components: water, CO2 - Electrical supply: 400 V, 50 Hz - Installed power: 16 kW - Rated current: 50 A - Operating hours: approx. 1,500 h Equipment - Vacuum deaeration of the water - CO2 carbonation with manual CO2 dosing - Two vertical stainless steel vessels - Pumps on a stainless steel base frame with adjustable feet - Stainless steel control panel with push buttons, indicator lamps and digital displays Condition Used, approx. 1,500 operating hours. The unit is already out of service and ready for collection. Gujdpjz A Dbrefx Aiheh Availability Available immediately. Location: Germany.

Condition: new, mileage: 45 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,655 kg, maximum load weight: 4,895 kg, overall weight: 8,550 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, Fuso 9C18 Duonic GSR City roll-off tipper, available in approximately 2-4 weeks, also available for rent with a purchase option. - Containers in various designs in stock - Gross vehicle weight: 8550kg, unladen weight: 3655kg, payload without container: 4895kg - Weight reduction to a gross vehicle weight of 7.5t possible, payload then approximately 3850kg - Automatic transmission (Duonic) - Differential lock with limited slip - Batteries 2 x 100 Ah - Trailer coupling, ball head 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Rear view camera Guedpfxjz Ixv Ue Aihjh - Tire pressure and tire temperature monitoring - Turning assistant - Reversing warning - Auxiliary drive with speed increase, factory-installed - Battery cover and AdBlue tank cover - Preparation for battery disconnection relay - Traction tires (all-weather M+S) Continental - Seat covers - Optional installation: rear view camera, rotating beacons, cover, net/strap box, etc. - Various containers constantly in stock or available to order - 3 years / 100,000km factory warranty, Fuso is a brand of Daimler Truck AG Roll-off system mounted on Fuso 9C18 - Roll-off system for containers according to DIN 30722 Part 3 - Lifting and pushing capacity 6000kg - Container length 3500-4000mm - Hook height 900mm - Hydraulic articulated hook arm (shallow lifting angle) - Hydraulic container locking (accommodation of third-party containers possible, safe container transport) - Mechanical hook lock - Cable remote control mounted on the A-pillar, operation possible outside the cab, additionally mechanical emergency operation on the device - Emergency/off function - CE certificate and kit box - Final painting of the hooklift: Black RAL 9005 / Rollers: Black RAL 9005 - Errors and prior sale are excepted! - More information, further XXL pictures on our website: - For inquiries in English, please call ?si=3WuXgXxgPc5ChoBp ... Climate control, automatic climate control, automatic transmission, VAT can be shown separately, ABS, radio, on-board computer, cruise control, heated mirrors, electric windows, central locking with remote control, trailer coupling, power steering, differential lock, tinted glass, tachograph, cab: short cab, air-suspended driver's seat, electric windows, auxiliary drive, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, particulate emission badge: 4 - Green

Condition: used, Labelling line with two print and apply stations This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control. The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture. Gsdpfxez Nc R Sj Aihouh Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling line with two print and apply stations Stations: 2, each with printer and label reel Controls: Display per station, push-button panel with emergency stop Construction: Stainless steel frame with conveyor

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Guodez Nc S Nepfx Aihoh Type: Tilting mixing kettle Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Construction: Stainless steel

Condition: good (used), Year of construction: 2013, lifting height: 13,200 mm, fuel type: diesel, Weights Empty weight: 7.083 kg Functional Lifting capacity: 680 kg Gusdpfx Asz D Tndeihsh Working height: 1.520 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,88x2,28 Production country: UZ Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS4390RT Year of build: 2013 Condition: Used Data: Max. working height: 15,20 m Platform height: 13,20 m Lifting capacity: 680 kg Lifting capacity on extension: 680 kg Platform dimensions LxW: 4,81 x 1,84 m Platform length pushed out: 7,40 m Transport dimensions LxW: 4,88 x 2,28 m Height transport position with/without railing: 2,96 / 2,18 m Movable up to working height: 15,20 m Ground clearance: 0,23 m indoor use only: nein Drive type: Diesel Empty weight: 7.083 kg Special features: All-wheel drive, abrasion-resistant white tires, anchor points for personal protective equipment (PPE), 230V generator, diesel particulate filter, double, extendable deck to max. 7.40 m.

Condition: good (used), Year of construction: 2011, lifting height: 31,630 mm, fuel type: diesel, Empty weight: 31.200 kg Lifting capacity: 1.000 kg Working height: 3.363 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Year of build: 2011 Condition: Used Data: Max. working height: 33,63 m Gusdsz D Txiopfx Aihjh Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform length pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m indoor use only: nein Empty weight: 31.200 kg Special features: White tires, automatic outrigger leveling, 230V connection on platform, hydraulic outriggers, 4-wheel steering, all-wheel drive, anchor points for restraint systems (PPE) provided.

Condition: new, maximum load weight: 30,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Knapen 3-axle SANH sliding floor trailer with electric roll cover, available from stock! * BPW 9-ton ECO Air HD rigid axle with disc brakes 430, 10-bolt, ET-120 * TireCheck tire pressure monitoring system * Smart Board * A-axis lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF * Gearbox-supported winch with push compensation, pivoting mud flaps * Plastic toolbox 1000x500x500mm * Water tank 28 L with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder * CARGOFLOOR CF-500 SL-C system, electric operation * Ribbed aluminum floor boards, 10 mm, 21 boards * Wear plates on the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear, under the floor * Platform on the front wall with ladder and safety switch to interrupt the power supply to the electric roll cover * Moving bulkhead * Rear doors with external locking bars * One locking bar per rear door * "A" sign (vertical hinge line) on the left rear door * Electric roll cover POWERSHEET, with remote control * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the welt on the left side wall, including fixed roll-fix operation at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Superstructure RAL 7011 IRON GRAY * Chassis galvanized, not painted Godpfx Aoz Iuw Ueihouh * A-frame painted in RAL 7011 IRON GRAY

Condition: good (used), Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table, low-profile lift table, scissor lift truck Gjdpsz Ayi Isfx Aihsuh -Manufacturer: Gruse, hydraulic scissor lift table trolley, scissor lift trolley, Hebefix type HF 2 C -Load capacity: 500 kg -Platform: 970 x 500 mm -Dimension when retracted: Height 360 mm -Extended dimension: Height 970 mm -Push bars: not included in the scope of delivery -Number: 2x scissor lift trucks available -Price: per piece -Transport dimensions: 1230/600/H360 mm -Weight: 100 kg/unit