Used Pye 250 for sale (10,373)

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Short cones: 6 -Recess: Ø 194 mm Bedpfx Aksd It Idenowu -Weight: 29.5 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Bjdpfx Ajd Iuxheknswu -Mouth size: Ø 250 mm -Passage: Ø 75 mm -Weight: 21.5 kg

Condition: good (used), Inductive sensor, electronic sensor Bsdpfxsfh Smne Aknewu -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -soft: interchangeable jaws -Bayonet: Short cone flange, cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Passage: Ø 81 mm Bsdpfx Akeduacijnewu -Weight: 22 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, Bedodxxrrepfx Aknjwu -2 pillars: punching tool -Recording: Ø 40 mm bolt -Dimensions: 300/360/H375 mm -Weight: 130 kg

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm Bwodpfod Hd Nmjx Aknou -Weight: 8 kg

Condition: good (used), Year of construction: 2002, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station Bedpfx Akspy Rx Tsnowu -Manufacturer: Couperus Hydrauliek, hydraulic station made of slats/blind production -Housing: material VA -Motors: 5x elsto 1.5 kW -Pressure: up to 250 bar -Flow rate: 10 l/min -Individual components: see photos -Dimensions: 2100/660/H1040 mm -Weight: 554 kg

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Bwedpfet Hwzpsx Akneu Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. We have a large selection of gear machines available. Please let us know your requirements.

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm Bwodpfjzrpn Ssx Aknsu ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Year of construction: 2019, condition: used, Technical Data: • Working width: min. 20 mm, max. 250 mm • Winding diameter: max. 510 mm • Core sizes: min. 1” to max. 3” (up to 6” with adapter) • Compressed air supply: 6 bar • Web tension: 1–21 N Equipment: • Base frame with two servo motors • 2 pneumatic winding shafts • Web tension system via dancer roller • Splice and label defect detection • Splice table • Measuring roller • Counter • Operation via HMI touchscreen with digital handwheel Features: • Bidirectional winding • Inside and outside winding • Winding tension control: diameter-dependent or independent • Fully reproducible winding results • Integrated job memory (recipe management) • Counter for labels, running meters and diameter Performance Model Gepard 500 Speed: 500 m/min (depending on material and winding diameter) Web width: 250 mm Guide rollers: approx. 80 mm CFRP Counter: Diameter, running meters, label counter with ultrasonic sensors for “clear-on-clear” labels Splice detection: Yes Check for missing labels: Yes Bjdpfxezq U Syo Aknewu Camera upgrade: Possible Printing Module of the HR Series Printing Module: Rea-Jet HR Series, up to 2 print heads, 25.4 mm printing width when supplied with one print head (12.7 mm printing width) Unwinding shafts: CFRP encoder roller (particularly suitable for thin films) with integrated encoder Speed: 60 dpi / 300 m/min; 600 dpi / 30 m/min Front and back printing: Yes Register accuracy: +/- 0.3 mm Ink: DCV2 Splice stations: Fully automatic splice stations for uninterrupted printing Software: Error-free start and stop of the printing process in bidirectional operation. Antistatic bars: 2 DC antistatic bars (one for the front and one for the back) Inspection System HQ 5050 General: Base plate, control unit, 40-inch HD LCD monitor, lighting system, high-performance image processing computer Available Algorithms: • Print image inspection • 2D code detection (only with > 4-MP camera), minimum size 10 mm / single element 0.6 mm / QR code / Micro-QR / Micro-PDF • Barcode capture (only with 4-MP camera), minimum size 0.6 mm / JAN/EAN/UPC / Code39 / Codabar / ITF / Code93 / Code128/GS1-128 / GS1 DataBar / Pharmacode / OCR capture (only with a camera resolution of > 4 MP) • General distance measurement • Data capture in CSV file Lighting: • Top light dome with glare-free illumination and high-performance LED (32,000 Lux) • LED flat dome backlight (30,000 Lux) for transmitted light inspection Camera: • 5-MP QSXGA color camera • 2,448 x 2,048 at 200 x 167 mm > 310 dpi • Min. defect size 0.3 mm • Approx. 160 m/min (100 x 100 mm label) Technical data according to user (without guarantee)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. Bwjdpfx Aozp Ew Dekneu - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5

Condition: good (used), Year of construction: 1986, machine/vehicle number: 057-016-47, Offer 26185 Technical specifications: - Maximum pressing force: 160 t - Maximum ram stroke: approx. 500 mm - Average working speed: approx. 92 mm/s - Return speed: 125 mm/s - Installation height: approx. 1000 mm Bwjdpfozn H Rvsx Akneu - Overhang to center of ram: 360 mm - Ram mounting pin: 40 mm - Table size: 900 x 630 mm - Table bore/opening: 220 mm - Table height above floor: 720 mm - Oil capacity: approx. 200 liters - Drive: 400 V / 17 kW - Space requirement: approx. W 1150 x H 3600 x D 1850 mm - Weight: approx. 7500 kg

Condition: new, total height: 1,700 mm, total length: 2,000 mm, total width: 1,480 mm, Equipment: documentation/manual, Semi-Automatic Band Saw Machine Bwsdpozquywofx Aknju Saw blade size 2910 x 27 x 0,9 mm Cutting speeds 20 - 120 m/min Cutting capacity 0° round Ø258 mm Cutting capacity 0° square 250x250 mm Cutting capacity 0° rectangular 320x100 mm Cutting capacity 45° round 210Ø Cutting capacity: 45° square 195x195 mm Cutting capacity: 45° rectangular, 210x100 mm Cutting capacity 60° round 135Ø Cutting capacity 60° square 110x110 mm Cutting capacity 60° rectangular 135 x 100 mm Cutting capacity -45° round 185Ø Cutting capacity -45° square 170x170 mm Cutting capacity -45° rectangular 195x100 mm Weight 390 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell cutter, face milling cutter, corner milling cutter Bsdpjzqywzofx Aknjwu -Manufacturer: Widax Kelch, face milling cutter head diameter 270 mm -Recording: Chalice 178 03 M Ø60 SK50 -Cutter head: Widia type WIDAX M45 D.250 R 13 -Number of teeth: 13 -Recording: SK50 -Dimensions: Ø 270 x 235 mm -Weight: 30.9 kg

Condition: used, mileage: 363,677 km, power: 96 kW (130.52 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 1,895 kg, maximum load weight: 1,530 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,450 mm, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 2,100 mm, total width: 2,270 mm, total height: 5,740 mm, maximum speed: 155 km/h, Equipment: ABS, air conditioning, central locking, navigation system, truck registration, FIAT Ducato 250 flatbed | 3 seats | air conditioning | multifunction steering wheel, radio | Bluetooth | 130 hp | Austrian vehicle | Loading dimensions: L: 3.25m, W: 2.05m, sideboard height: 40cm | toolbox | Subject to errors, input mistakes, and prior sale Bwsdjyxghrepfx Aknou

Condition: excellent (used), Year of construction: 2018, HS Flex 20 station pallet loader. XYZ: 600 x 550 x 330mm, Maximum workpiece diameter 450mm, maximum workpiece height 355mm, Maximum table load 300Kg, A axis -/+ 115 degrees, spindle taper HSK 63, spindle speed 15,000rpm, Bwodpfxozghnge Aknju 30 station tool changer, Heidenhain TNC 640 control, with swarf conveyor , and high pressure coolant.

Condition: good (used), Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Groove width 27 mm -Number: 3x mounting brackets available Bwsdpfozn I S Ujx Akneu -Price: per piece -Dimensions: 280/250/H290 mm -Weight: 13.5 kg/pc.

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Bwsdpfxjzn N H To Aknou

Condition: used, Year of construction: 2007, operating hours: 8,957 h, Equipment: all wheel drive, * Enclosed cab * Air conditioning * Radio * Central lubrication system Bsdpfx Ajy Daf Ijknjwu * Work lights * Loading bucket * Load disconnect ----Subject to errors and prior sale ----Vehicle number: 11891

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Bjdpfx Akszw Ucxsnewu Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Bedpfezw Ug Rex Aknowu Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2006, operating hours: 40 h, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 4292-1-197652, Gerstenberg Schröder Consistator MD 250 L-S For sale is a used Gerstenberg Schröder Consistator MD 250 L-S scraped surface heat exchanger from a production facility. The unit was used for processing vegetable juice and is being sold due to process changes and restructuring. Bodpszwwibsfx Aknewu Technical Data Manufacturer: Gerstenberg Schröder Type: Consistator MD 250 L-S Year of Construction: 2006 Serial Number: 4292-1-197652 CE Marking: CE 0038 Design: Scraped Surface Heat Exchanger Product Side Medium: Vegetable juice Pressure Range: 0 / 35 bar Test Pressure: 59 bar Max. Temperature: 150 °C Volume: 25 liters Media Side Medium: Steam Pressure Range: 0 / 13 bar Test Pressure: 28 bar Max. Temperature: 165 °C Volume: 75 liters Condition The machine is used and comes from an industrial production environment. Inspection is possible by prior appointment. Location 71106 Magstadt, Germany Sale Sale from location / Ex Works. Loading and transport are to be arranged by the buyer, or can be arranged upon agreement. If you are interested or have any questions, further information, pictures or details can be provided.

Condition: used, Year of construction: 2026, In use with the Lehnhoff MS03 system WVE.250 Roller width 250 mm For excavators from 1.5 t to 7 t Roller diameter 600 mm Overall height without adapter 650 mm Weight 190 kg Bedjzw Ngxepfx Aknswu What is a compaction roller used for? A compaction roller on an excavator is primarily used to efficiently compact soil, trenches, slopes, and backfill in earthworks and road construction. It is ideal for hard-to-reach areas, offers a safe alternative to manual compaction, and enables fast, uniform compaction – without vibration. Safety: No personnel need to stand directly in the trench. Important areas of application and functions: Trench construction + pipeline zones: Compacting soil in the trench, especially around pipes, without damaging them. Slope and surface compaction: Stabilizing steep slopes, backfilling foundations, or large areas. Gardening and landscaping: Soil compaction in narrow or difficult areas. Demolition + road construction: Re-compacting layers after filling operations. Dimensions, price, and weight without adapter

Year of construction: 2013, condition: excellent (used), HewSaw SRC200/250 Bedpfx Aszwnbhjknjwu

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: Bwedpszbnl Aefx Akneu -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.