Used Reduction Sleeve for sale (2,754)

Condition: used, various reduction sleeves for MK mounts Fsdpfx Asdgcd Asl Usgh 5 x 5 to 4 2 x 5 to 3 1 x 5 to 2 1 x 5 to 1 1 x 6 to 4 1 x 6 to 5 1 x 4 to 3 1 x 3 to 2

Condition: good (used), Year of construction: 2014, functionality: fully functional, CNC-controlled lathe with powered tools, chip conveyor, automatic tool measuring system, chip evacuation conveyor, and bar feeder. Put into operation 11/2014 Control system OSP-P300L CNC with a 15" color touchscreen Machine hours: Power-on time: 65,458 hours as of 03/18/2026, NC operating time: 36,054 hours Spindle rotation time: 19,533 hours Cutting time: 16,582 hours And increasing. Fgodpfxjz Hk R Uo Al Ujh Power consumption 33.1 kVA Technical data Max. swing diameter 480 mm (approx. based on the current chip conveyor design) Max. machining diameter 340 mm Max. turning length 785 mm Collet chuck + 10" hydraulic chuck B210-A06-01, 3x soft jaws (Schunk KM-WBL 103) 1x hard jaws (Schunk SHB-J 100) Hydraulic through-bore cylinder SS 1770, draw tube Main spindle Spindle with JIS A2-6 interface, 80 mm bore, integrated motor Speed range 45 - 5,000 rpm Power/continuous operation 22 kW/15 kW Continuously controlled C-axis, 3600 with 0.001° increment Sub-spindle Speed range 50 – 6,000 rpm Power/continuous operation 11 kW/7.5 kW Spindle with 140 mm interface, 62 mm bore, integrated motor Continuously controlled C-axis, 360° with 0.001° increment Collet chuck + 6" hydraulic chuck B206-01, 3 x set of soft jaws (Schunk KM-WBL 62) Hydraulic through-bore cylinder SS1243, draw tube Sub-spindle travel - NC axis W travel for W450: 595 mm Spring-loaded part ejector from the sub-spindle Overload protection for W-axis (drive torque) Tailstock mounting in the sub-spindle Turret Number of tool positions 12, both fixed and powered BMT60 (not VDI) Tool mounting in. 25 x 25 mm Tool mounting out. diameter 40 mm Powered tools Drive power 7.1/4.1 kW Speed range 45 – 6,000 rpm Feed speeds Rapid traverse in X and Z axes 25/30 m/min Rapid traverse in C axis 200 rpm Travels X-axis 260 mm Z-axis 510 mm Y-axis 115 mm (+70 mm / -45 mm) Machine data Width 3330 mm – without bar feeder and chip conveyor Depth 1800 mm Height 2250 mm Machine weight 5,250 kg Accessories: OSP-P300L Advanced One Touch CF-M-E package including: Coordinate transformation function Profile generation function Advanced One Touch IGF 3D machining process simulation Cutting time overrun check Load monitoring (spindle, feed axes) NC operation monitoring (including part counting) Function for reducing cycle time Hi-Cut Pro function Spindle speed control function High-pressure coolant, max. 20 bar, max. 50 l/min Bar feeder ILS type MUK 7012, with bar magazine 6-70 mm/1250 mm, year of manufacture 05/2014, manufacturer Kurt Breuning – IRCO Maschinenbau GmbH, Steinenbronn. FILTERMIST FX4002 extraction unit Equipment for the machine: Collet chuck: SMW AUTOBLOK: KSZ-DZN-065-A06 201342 (currently on the main spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -29-30 31-32-34-35-36-38-39-40-41-42-44-45-46-48-50-51-53-55-57-60-64-6 5 Grooved collets diameter (mm) 55-60-65 Collet chuck: SMW AUTOBLOK: KSZ-DZN-042 Z140 205073 (currently on the sub-spindle) Collets diameter (mm): 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-25-26-27-28 -30 31-32-34-35-36-39-38-40-41 Tool holders: Axial holder - 5X Tool holder, turning - 5x Tool holder, boring bar - 2x Front-end drive, double-sided - 3x Front-end drive, side - 3x Reduction sleeve (manufactured from stock material) Reduction - nylon diameter (mm): 12-14-15.5-17-20-22-24-26-28-30-31-34-36-38-40-42-44-47-50-52 The machine is regularly serviced.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 660/275 mm turning length 1498 mm control Fanuc/Mori Seiki MSX 701 total power requirement 90 kVA weight of the machine ca. 26,6 t dimensions of the machine ca. 5301 x 2997 x 2788 mm Additional information 9-axis CNC turning and milling centre * Fanuc MSX-701 CNC control * Milling spindle at top (B axis), as full 4th axis, positioning 0.0001 deg. * 40-position tool magazine * 10-position turret at bottom, all positions driven * 2 x 3-jaw quick-change chuck KNCS-N 315/91 * KNOLL high-pressure coolant system, pressure setting 12/25/35/45/55/62 and 72 bar, with maintenance-free rotary filter system * Chip conveyor * Drain system for main spindle chuck (controlled via M function) * Drain system for tool cutting edge (controlled via M function) * Coolant gun incl. accessories * Oil mist extraction * Direct measuring system X1, X2, Y-axis * Bar loader interface * Double foot switch for both spindles * Islands and pocket programming for MAPPS * High-speed fixed cycle for MAPPS * Programm memory extension to 8 MB * Programm restart * 3-stage signal lamp * 512 MB memory card (CF card) Swing diameter over cross slide (tool spindle 1): 750 mm Swing diameter over cross slide (turret 2): 400 mm Max. turning diameter (tool spindle 1): 660 mm Max. turning diameter (turret 2): 275 mm Max. machined workpiece length: 1498 mm Max. bar material: 90 mm Travels: X1 axis (tool spindle): 750 mm Y axis (tool spindle): 420 (+/- 210) mm Z1 axis (tool spindle): 1635 + 100 mm for tool change B axis (tool spindle): +/- 120 deg., full B-axis 1 deg. indexed and 0.0001 deg. braked X2 axis (turret): 195 mm Z2 axis (turret): 1525 mm SZ axis (subspindle): 1610 mm Rapid traverse: (X1,Z1) 50 m/min. / (Y,X2,Z2,SZ) 30 m/min. Main and subspindle: Spindle speeds infinitely variable (spindle 1 + 2): 30-3000 rpm. C axis (spindle 1 + 2): 0.001 deg. Main spindle motor: 22/18.5 kW Subspindle motor: 22/18.5 kW Torque (spindle 1 + 2): 1000 Nm Disc turret: Number of tool positions: 10 Speed of driven tools: 6000 rpm. Drive power: 5.5/3.7 kW Milling spindle head: Tool holder: HSK A63 Max. speed: 12,000 rpm Drive power: 18.5/11 kW Torque: 120/44 Nm Tool changer: 40-stations Tool diameter 70/140 mm Tool length 400 mm Tool weight 8/10 kg Total power requirement 90 kVA Main dimensions Length x width x height 5301 x 2997 x 2788 mm Machine weight 26.6 t Fsdezr Hgxjpfx Al Usgh Accessories: Measuring arm (picture) tool measurement in machine Tool holder + box, reduction sleeves, driven tools Clamping jaws package Collets package

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH Fgedsyz Ubxjpfx Al Ush Transport can be arranged directly to the customer anywhere in Europe. Transport cost is quoted individually according to the delivery postcode and destination. MTP CQ6280 HEAVY-DUTY UNIVERSAL LATHE 800 × 3000 – Ø105 mm SPINDLE BORE – 7.5 kW – 3-AXIS DRO Metal Technics Polska – Professional Metalworking Machinery The MTP CQ6280 800 × 3000 is a heavy-duty universal lathe designed for demanding professional and industrial machining applications. Its rigid construction, large working capacity and Ø105 mm spindle bore make it suitable for machining large shafts, cylindrical components, tapers, stepped parts and internal or external threads. With an 800 mm swing over bed, 3000 mm turning length, 400 mm wide bed and a machine weight of approximately 4300 kg, the CQ6280 provides the stability required for heavy workshop and production use. The machine is equipped with a 7.5 kW main motor and 3-axis Digital Readout (DRO) for accurate and convenient machining. TECHNICAL DATA • Maximum turning length: 3000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mounting: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev • Z-axis feed: 0.044–1.48 mm/rev • Tailstock quill diameter: Ø90 mm • Tailstock quill travel: 235 mm • Tailstock taper: MT5 • Tailstock cross adjustment: 11 mm • Metric threads: 0.45–120 mm • Module threads: 0.25–60 mm • Diametral Pitch threads: 0.88–160 DP • Whitworth threads: 7/16–80 TPI • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions: 4740 × 1140 × 1910 mm • Weight: approx. 4300 kg STANDARD EQUIPMENT • 3-axis Digital Readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Drive plate • Fixed steady rest up to Ø250 mm • Travelling steady rest • Coolant system • Chuck guard • Fixed splash guard • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for: • large shafts and cylindrical components, • tapers and stepped workpieces, • internal and external threading, • repair and maintenance work, • heavy workshop machining, • general industrial production. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase, as well as warranty and post-warranty support. Professional transport can be organised throughout Poland and the whole of Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center height in crank: 517 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, MTP CQ6280 Lathe 800 × 1500 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CQ6280 is a heavy-duty universal lathe designed for machining shafts, tapers, spherical surfaces and internal and external threads using turning tools, drills and threading tools. With a swing over bed of 800 mm, a turning length of 1500 mm and a Ø105 mm spindle bore, it is ideally suited for professional workshops and industrial production. TECHNICAL DATA • Maximum turning length: 1500 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm (gap length 330 mm) • Bed width: 400 mm • Z-axis travel: 230 mm • X-axis travel: 420 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 speeds) • Spindle bore: 105 mm • Spindle nose: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev (25 steps) • Z-axis feed: 0.044–1.48 mm/rev (25 steps) • Tailstock quill: Ø90 mm, MT5, 235 mm travel • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm (54) • Module threads: 0.25–60 mm (46) • Whitworth threads: 7/16–80 TPI (54) • Diametral Pitch threads: 0.88–160 DP (42) • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3240 × 1140 × 1910 mm • Weight: 2600 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm Fgjdpfx Ajyzzghjl Ush • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard and splash guard • Coolant system • Reduction sleeves • Fixed centre • Tool set DELIVERY, WARRANTY & SERVICE Delivery can be organised to any destination in Europe. The machine is supplied with a 12-month warranty on parts, with technical service and support available throughout Europe.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 1 x CNC turning center Traub TNA 300 Year of manufacture: 2002 Fodpswtlz Tjfx Al Uogh (Spindle hours: 40746) Control: System TX 8 H with bar feeder LNS Hydrobar + chip conveyor Knoll Well-maintained machine with an extensive range of accessories, in excellent optical and technical condition. Accessories 33 x VDI 30 tool holders for turret (11 of which are driven) 1 x additional collet chuck with spindle reduction sleeve 10 x collet 181 E 10 x collet 171 E optional 1 x rotating steady rest in tailstock 1 x ATC optics Complete documentation The machine can be inspected while running.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, MTP CW6180X2000 – Heavy-Duty Universal Lathe 800 × 2000 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CW6180X2000 is a heavy-duty universal centre lathe designed for professional machining of shafts, cylindrical components, tapers, spherical surfaces and internal or external threads. With an 800 mm swing over bed, 2000 mm turning length and a large Ø105 mm spindle bore, the machine is suitable for demanding workshop and industrial applications. Its rigid 400 mm wide bed, powerful 7.5 kW main motor and extensive threading and feed ranges make it a versatile machine for repair workshops, toolrooms, maintenance departments and general production. TECHNICAL DATA • Maximum turning length: 2000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mount: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev, 25 steps • Z-axis feed: 0.044–1.48 mm/rev, 25 steps • Tailstock quill diameter: Ø90 mm • Tailstock taper: MT5 • Tailstock quill travel: 235 mm • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm, 54 ranges • Module threads: 0.25–60 mm, 46 ranges • Whitworth threads: 7/16–80 TPI, 54 ranges • Diametral Pitch threads: 0.88–160 DP, 42 ranges • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3740 × 1140 × 1910 mm • Weight: approx. 3800 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard • Splash guard • Coolant system • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for machining: • shafts and large cylindrical components, • tapers and stepped parts, • internal and external threads, • repair and maintenance components, • general industrial production work. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, tooling and machining parameters. Fgsdpoyzz Sqofx Al Ueh Professional transport can be organised throughout Poland and the whole of Europe. Warranty and post-warranty service are available. Please contact us for current availability, delivery costs, additional photographs, technical information or a personalised commercial quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Equipment: documentation/manual, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. Fjdpsyr Ihlofx Al Uogh D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: hydraulic, working width: 400 mm, stroke rate (max.): 8 1/min, throat depth: 300 mm, punching force: 66 t, punching diameter: 25 mm, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, table length: 500 mm, table width: 500 mm, overall weight: 1,700 kg, total length: 1,640 mm, total width: 730 mm, total height: 1,770 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, notching unit, NEW MTP IW66 Hydraulic Ironworker – 660 kN – 12 months warranty on parts – delivery to any destination in Europe The MTP IW66 by Metal Technics Polska is a versatile 5-in-1 hydraulic ironworker for metal fabrication shops, steel construction and maintenance workshops. With 660 kN working pressure it punches, shears and notches plate, flat bar, square bar, round bar, angle and channel – and the work table also allows plate bending up to 500 mm. One compact machine replaces several single-purpose tools. TECHNICAL DATA • Working pressure: 660 kN • Max. cutting thickness (plate): 16 mm • Max. cutting length: 400 mm • Tensile strength of material: up to 450 N/mm² • Shear angle: 7° • Ram stroke: 80 mm • Stroke rate: 8 strokes/min • Throat depth: 300 mm • Max. punching capacity: Ø25 x 16 mm • Main motor: 4 kW, 400 V / 50 Hz / 3-phase • Control voltage: 24 V • Dimensions (L x W x H): 1640 x 730 x 1770 mm • Weight: 1700 kg FEATURES • Separate stations: punching, angle shear, bar shear (round/square), plate/flat bar shear, notching • Safety guards with viewing windows on all stations • Emergency stop and foot pedal with stop button • CE electrical cabinet with Schneider main components • HUADE hydraulic valve STANDARD ACCESSORIES • Punch and bottom die • 500 x 500 mm work table with chamfering • 1000 mm electric back gauge • Japanese-brand oil pump Fgodpfoz Hz A Iox Al Ueh • Press function • Reduction sleeve CONDITION Brand-new machine (2026), tested and inspected at the factory (inspection report available). Photos show the actual machine. WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 8,680 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you: Manufacturer: INDEX Type: MS40-6 C Year of construction: 2019 Control: Index control C200-SL, MS40C Double-NCU Technical data: Working spindles: Number: 6 pcs. Spindle bore: max. 40 mm Max. speed: 7,000 rpm Power (100% / 25%): 13 / 24 kW Torque (100% / 25%): 31 / 57 Nm Synchronous spindle: Number: 1 pc. Spindle bore: 40 mm Max. speed: 8,000 rpm Power (100% / 25%): 10 / 14 kW Torque (100% / 25%): 16 / 22 Nm Slide travel z: 150 mm Number of tools for back-end machining: 3 pcs. Swiveling range b: 144 ° Tool holder: Number: 12 pcs. Slide travel x: 73 mm Slide travel z: 120 mm Tool holder, cut-off and back-boring slide: Number: 1 pc. Slide travel x: 82 mm Number of tools for back-end machining: 3 pcs. Electrical connection data: Rated power: 85 kW Connection power: 101 kVA Rated current: 145 A Max. pre-fuse: 160 A Note: Mains voltage: 400V Note: Electrical frequency 50 Hz Technical features & accessories: - Double-NCU - Signal light 'Smartlight' with LED - Machine designed for connection to a TN network. - Coolant: Cutting oil - NC option Synchronous spindle / Multi-sided turning incl. electronic shaft - INDEX loading magazine MBL40-6/3300/Strip loader/50Hz: Fgodozlutmepfx Al Ueh - Strip loader 50Hz - for bar diameter D13 - D40 - Bar length 3300 mm - with pilot drilling unit - Material storage with 700 mm support area - Profibus-DP-Master interface. - 1 set (6 pieces) reducing sleeves manufactured for bar or corner dimensions, diameter D = * mm, Inner diameter range D14 - D41 - 1 set (6 pieces) material sliders for material diameter D24mm - D32mm, consisting of: - 6 material sliders D23 - 6 rotating sleeves D23 - 1 set (6 pieces) internal clamping sleeves D23mm - for material diameter D24mm - D32mm - pilot drilling diameter D15mm - 1 set (6 pieces) external stops D23mm - for material diameter D24mm - D32mm - pre-machined - 1 set (12 pieces) reducing sleeves for material sliders. The outer diameter of the reducing sleeves corresponds to the material diameter (D13 - D40) - 1 set (6 pieces) adapter sleeves, inner diameter range D13.5 - D40.5. The inner diameter of the adapter sleeves should be bar diameter + 0.5mm. - 1 set (6 pieces) two-part guide intermediate tubes, diameter 29 mm - Assembly aid for the sleeves of the guide intermediate tubes - UNIMAG - Interface for connecting a bar loader - Part discharge via slide into spindle position 6 - Workpiece conveyor belt in spindle position 6, machine-integrated - Hainbuch TOPlus Axfix D40 for synchronous spindle - Multi-sided and thread milling device - Reduction ratio i=5:1 - Inductive encoder for reference query - Internal oil lubrication - INDEX short taper connection - without converter - Back-end machining device on slide position 6.2 for max. three boring positions for fixed tools FURTHER INFORMATION IN THE PICTURES Accessories, tools and clamping devices shown are only included in the scope of delivery if this is stated in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: used, Year 1989 Center height on the bed: 225 - 250 mm Distance between centers: 1500 mm Maximum turning diameter in the gap: 660 - 710 mm Maximum turning diameter on the bed: 455 - 505 mm Maximum turning diameter on the carriage: 270 - 290 mm Fixed steady rest bore diameter: 200 mm Traveling steady rest bore diameter: 130 mm Bed width: 330 mm Gap width: 250 mm Gap width at the carriage: 160 mm Maximum spindle diameter: 140 mm Spindle bore: 105 mm Reduction sleeve for spindle / Morse taper: No. 5 Tailstock Morse taper: No. 5 Speeds and Feeds • Spindle speeds: No. 16 • Speed values: from 23 to 1000 rpm (or 35 to 1500 rpm). • Longitudinal feeds: 0.06 - 0.84 mm/rev. • Transverse feeds: 0.03 - 0.42 mm/rev. Threads • Metric pitches: 0.5 - 28 mm. • Module pitches: 0.25 - 14. • Whitworth: 2 - 112 threads/inch. Motor • Standard power: 7.5 HP. Fgjdpfx Alsz Dwl Ts Ueh Machine comes with operating and maintenance manual. All technical data provided is indicative and may be subject to change without prior notice; therefore, it should not be considered binding.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 255 mm, spindle bore: 52 mm, turning diameter: 410 mm, turning length: 100 mm, total length: 1,940 mm, total width: 850 mm, total height: 1,320 mm, bed width: 250 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 45 rpm, type of input current: three-phase, overall weight: 1,550 kg, Technical data Turning diameter over bed: 410 mm Turning diameter over cross slide: 255 mm Turning diameter in gap: 580 mm Turning length in gap: 190 mm Distance between centers: 1000 / 1500 / 2000 mm Bed: induction hardened Bed width: 250 mm Spindle bore: 52 mm Spindle nose: D1-6 Spindle taper: Morse taper No. 6 Spindle speed range: (16) 45 – 1800 rpm Maximum tool size: 20 x 20 mm Longitudinal feed range: (17) 0.05 – 1.7 mm/rev Cross feed range: (17) 0.025 – 0.85 mm/rev Metric threads: (42) 0.2 – 14 mm Inch threads: (45) 2 – 72 T.P.I Module threads: 0.3 – 3.5 M.P. Diametral pitch threads: 8 – 44 D.P. Tailstock quill diameter: 50 mm Tailstock quill travel: 120 mm Tailstock taper: MT4 Digital readout: 3-axis DRO Coolant pump power: 0.1 kW Overall dimensions (L x W x H): 1940 x 850 x 1320 mm Motor power: 3.3 kW Weight: 1550 kg Equipment Fedpfx Aleytnzne Ujgh 3-jaw chuck 200 mm 4-jaw chuck 250 mm Faceplate 250 mm Driving plate 350 mm Steady rest Follow rest Spindle reduction sleeve Dead center Coolant system Halogen work light Thread dial indicator Tool kit Sales conditions The machine is brand new. 12-month warranty Warranty service Post-warranty service Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 60 mm, roller (top) diameter: 60 mm, side roll diameter: 60 mm, overall weight: 310 kg, total length: 1,300 mm, total width: 700 mm, total height: 1,260 mm, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1020 × 2.0 mm – Electric 3-Roll Sheet Metal Bending Machine PRICE: €1950 NET EXW European delivery available – transport quotation on request. The MTP ESR 1020 × 2.0 mm is a robust electrically driven 3-roll sheet metal bending machine designed for accurate rolling of cylindrical components, tubes, sleeves, rings and light conical parts. Its compact footprint, rigid welded frame and hardened steel rolls make it suitable for professional fabrication workshops, maintenance departments and production facilities requiring a reliable machine for regular sheet-metal forming work. MAIN TECHNICAL DATA • Working length: 1020 mm • Maximum sheet thickness: 2.0 mm • Roll diameter: 60 mm Fgedpfoz Hx T Rex Al Ush • Motor power: 0.75 kW • Power supply: 400 V • Dimensions: 1300 × 700 × 1260 mm • Weight: approx. 310 kg • Number of rolls: 3 • Drive: electric • Condition: brand new MACHINE FEATURES The ESR 1020 × 2.0 mm uses a three-roll system with eccentric pressure adjustment, allowing straightforward positioning of the rolls and controlled forming of the workpiece. The rolls are manufactured from high-grade hardened steel, providing good durability and resistance to wear. The lower and upper rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for cone rolling within its standard adjustment range. As shown in the photographs, the machine features: • heavy-duty welded steel frame, • electric motor with reduction gearbox, • manual handwheels and levers for precise mechanical adjustment, • easy roll-position adjustment, • swing-out / releasable upper-roll arrangement for easier removal of finished cylindrical workpieces, • foot pedal for convenient forward/reverse operation, • emergency stop button, • perimeter safety cord around the working area, • clearly accessible operating controls, • CE marking and safety warning labels. The foot-operated control allows the operator to keep both hands free for positioning and guiding the sheet during the rolling process, improving control when working with larger workpieces. APPLICATIONS Suitable for producing: • cylindrical sheet-metal parts, • tubes and sleeves, • rings, • curved panels, • light conical components, • general fabrication and workshop components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales assistance. We can help with machine selection, rolling technology and suitable operating parameters for different materials. Warranty and post-warranty service are available, and we can organise professional transport throughout Poland and the whole of Europe. Brand-new machine with manufacturer’s warranty. Available to order. Please contact us for current delivery time, transport costs, additional photographs, technical information or a personalised commercial quotation.

Condition: good (used), Year of construction: 2015, operating hours: 20 h, functionality: fully functional, Indexing hand device for grinding and milling machines as well as other applications. Robust cast body on swivel angle and base plate. Interchangeable T-slot nuts 10 mm. Comes with reduction sleeves MK6 - MK5 and MK6-SK50, index plate T24. Additional index plates with other divisions used, unit price € 60.00. Used clamping devices – please inquire. Fgedpfxoyxyxkj Al Ujh

Condition: used, Year of construction: 1970, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 1000 mm center height measured in bed: 250 mm centre distance: 1000 mm revolution per minute: 18...1800 / 21 step U/min spindle bore of work spindle: 56 mm tailstock quill adjustment:: 180 mm Fsdevvrpkopfx Al Uegh longitudinal feeds:: 0,08 - 3,26 mm/U cross feed: 0,04 - 1,63 mm/U Rapid feed X axis: 4,2 m/min. total power requirement: 7,5 kW weight of the machine ca.: 2,9 t dimension machine xH: 2,6 x 1,1 x 1,3 m 4-jaw chuckØ 250mm with internal jaws live center in tailstock 4-fold quick-clamping tool holder coolant system Accessories: various reduction sleeves MK3-MK5-MK4 revolving tip "Clamping heart" 3-jaw chuck Ø 250mm with inner jaws The machine does not comply with APR (accident preventing regulations) *

Condition: ready for operation (used), Year of construction: 2017, operating hours: 17 h, number of axes: 3, This 3-axis GEHRING 630-1 LR vertical honing machine was manufactured in 2017. It features a HAINBUCH sleeve with a diameter of 65 mm, VDI40 tool holders, and a hydraulic holder for reduction bushing. Ideal for precision honing applications. Contact us for more information about this machine. Additional equipment Fgodpfx Aeyap Uisl Uoh • HAINBUCH hexagonal collet sleeve, Ø65 mm — qty 1 • HAINBUCH alignment screwdriver — qty 3 • HAINBUCH drawbar adapter — qty 1 • Cable (unspecified) — qty 2 • Unclamping tool (unspecified) — qty 1 • Internal coolant pickup — qty 1 • VDI40 hydraulic toolholders, Ø20 (ISCAR) — qty 8 • MAPAL holder D12, Ø13, part no. — qty 4 • Reducer bushing for hydraulic holder, 20→13 mm — qty 6 • MAPAL HM reamer plate “Axel 92-R-0N” — qty 30 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 1 • Hydraulic holder for reduction bushing ISCAR 20→14 — qty 3 • Chisel/tool holder DIN 69880 – E2 – 40×40 — qty 1 • MAPAL D12 holder/bracket Ø14 (unspecified model) — qty 4

Condition: used, machine/vehicle number: 008705, Overall length: 2099 mm Overall width: 1138 mm No of Filter sleeves: 16 Fgedpfx Alszq Utds Ush

Condition: used, machine/vehicle number: 008704, Overall length: 3435 mm Fgjdpfx Alezq Uryj Ueh Overall width: 1100 mm Suction capacity: 5750 m3/h No of Filter sleeves: 60

Condition: new, Year of construction: 2026, CORMAK 500 x 1000 (CJ6250Cx1000) Universal Lathe The CORMAK 500 x 1000 is a robust and precise conventional metal lathe designed for professional machining in industrial plants, tool rooms, and repair workshops. Thanks to its high bed rigidity, modern drive system, and versatile equipment, the machine ensures reliable and repeatable operation for both single-item and batch production. Key Advantages of the Machine Induction-hardened bed, resistant to torsion and vibrations – guarantees machining accuracy. Removable bridge section allows for machining parts up to 630 mm in diameter. Modern spindle bearing system with ball bearings ensures stable operation at high speeds. Precise speed and feed control – full control over process parameters. Rapid longitudinal and cross feeds – for faster operations. Digital readout for 3 axes – simplifies dimensional control and shortens setup time. Wide threading capabilities – metric, imperial, modular, and D.P. threads. Main motor 5.5 kW – high power for demanding material machining. Standard Equipment 3-axis digital readout 3-jaw self-centering chuck, Ø 250 mm Fixed steady rest Travelling steady rest Spindle reduction sleeve Foot-operated emergency brake Full-length chip guard Fgedpexd Upxofx Al Ush Coolant system 24V halogen work light Threading dial indicator Tool kit CE Declaration of Conformity User manual Brand-new machine with warranty Technical Specifications Parameter Value Swing over bed 500 mm Swing over cross slide 325 mm Swing in gap 630 mm Turning length in gap 260 mm Maximum turning length 1000 mm Bed type Induction-hardened Bed width 330 mm Chuck diameter 250 mm Spindle bore 80 mm Spindle nose D1-8 CAMLOCK Spindle speed range 24–1600 rpm Max tool size 25 x 25 mm Longitudinal feed range 0.072–4.038 mm/rev Cross feed range 0.036–2.019 mm/rev Cross slide travel 305 mm Compound slide travel 130 mm Metric threads 1–192 mm Inch threads 0.5–28 TPI Module threads 1–56 mm D.P. threads 8–56 D.P. Tailstock quill diameter 65 mm Tailstock quill travel 120 mm Tailstock taper MT 5 Digital readout 3-axis Main motor power 5.5 kW Coolant pump power 0.1 kW Machine weight 1700 kg

Condition: excellent (used), Year of construction: 1994, CNC Lathe Automatic Index GS42 Control: Index C200-8 (Sinumerik 880) Spindle bore: 42 mm, two machining turrets Turret 1 – X=120 mm, Z=220 mm, 12 tool stations (6 driven), part handover Turret 2 – X=120 mm, Z=80 mm, 8 tool stations (4 driven) Dynamic C axis Bar feeder with magazine INDEX MBL 3500 mm, including complete set of reduction sleeves Fodpfx Alox E Sqlj Uogh Set of clamping collets – 10 pcs Driven tool holders – 5 pcs Standard VDI20 tool holders – 5 pcs The machine is 100% operational and in excellent condition (maintains tolerances up to 0.001 mm)

Condition: new, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm Fsdpfjiz Tczex Al Uogh BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.

Condition: new, Year of construction: 2026, CORMAK WK50 Pillar Drill Press – Heavy-Duty Industrial Metal Drilling and Tapping Machine The CORMAK WK50 is a high-performance industrial pillar drill press with tapping function, designed for intensive drilling, reaming, countersinking, hole enlargement, and tapping operations in metal. Thanks to its rigid rectangular body construction, high feed force, and wide range of spindle speeds and torque values, the WK50 industrial drilling machine is suitable for both single-piece production and serial manufacturing, ensuring repeatability, accuracy, and high machining efficiency. Main Advantages of the Machine Large drilling capacity – up to 50 mm in steel and up to 55 mm in cast iron, enabling machining of large-diameter holes. Drilling machine with tapping function – reverse spindle rotation and high spindle torque allow efficient and precise thread cutting. Precise spindle guidance – 250 mm spindle travel and 9 feed settings (from 0.056 to 1.80 mm/rev) allow optimal adjustment of machining parameters. High spindle torque – 35 kgm – enables effective drilling and tapping even in high-strength materials. Rigid rectangular column design – provides excellent stability of the drive system and resistance to dynamic deformation. Cooling system – coolant pump with a capacity of 12 l/min ensures proper thermal conditions in the cutting zone. Intuitive operation and easy maintenance – the machine has been designed for ergonomic use and reliable long-term operation. Design and Technology – High Rigidity for Industrial Applications The CORMAK WK50 pillar drill press is based on a highly rigid construction with a vertically adjustable spindle head featuring 200 mm manual travel. The solid machine body and precision guide system ensure accurate positioning of tools and workpieces. The 12-speed spindle gearbox (31.5–1400 rpm) provides a wide operating range, allowing optimal cutting parameters to be selected for different materials and machining operations. The large 710 × 490 mm worktable makes it easier to mount large and irregularly shaped workpieces, increasing the machine’s versatility in industrial environments. Precision and Working Efficiency High spindle torque and precise feed adjustment ensure excellent repeatability during serial production tasks. The CORMAK WK50 drill press with automatic feed enables semi-automatic drilling and tapping operations, reducing errors caused by manual operation. The integrated cooling system and work lighting improve operator comfort and safety, especially during precision machining and long production cycles. Standard Equipment Cooling system with 12 l/min pump Work light 710 × 490 mm worktable Drill chuck 1–13 mm Morse reduction sleeves – 2 pcs. (for MK5) Technical Specifications Parameter Value Maximum drilling diameter 50 mm (55 mm in cast iron HB=220) Spindle taper MK5 Spindle travel 250 mm Spindle head manual travel 200 mm Maximum feed force 1600 kg Maximum spindle torque 35 kgm Spindle-to-column distance 335 mm Number of spindle speeds 12 Spindle speed range 31.5–1400 rpm Spindle feeds 0.056–1.80 mm/rev (9 settings) Worktable dimensions 710 × 490 mm Spindle-to-table distance 550 mm Main motor power 3 kW Fgodpforigc Nsx Al Ujh Coolant pump capacity 12 l/min Overall dimensions 1300 × 1200 × 2530 mm Weight 1350 kg

Condition: new, Year of construction: 2024, Special offer: €42,000 (instead of €49,900), excluding VAT. Immediately available / Made in Italy Included premium features: - Heidenhain ND5023 3-axis position display - 5-position length stop for the carriage - SRW-Amestra Multifix C quick-change tool holder with 4 inserts - LED work area lighting - Set of leveling pads from Spinelli Standard features: - Double mechanical clutch - Electromagnetic brake - Rapid traverse - Air supply on the tailstock to facilitate movement along the bed - Bed, legs, headstock, tailstock and carriage made of cast iron - Bed guides are induction hardened and ground - Headstock with induction hardened and ground gears - Spindle is mounted on high-precision bearings - Friction-free movement of the carriage - Electrical system in an airtight cabinet with components from Siemens and/or Schneider - Spindle reduction sleeve - 2 dead centers - Chuck guard with microswitch, turret plexiglass guard, rear guard covering the entire machine length, guard for leadscrew and feed rods, emergency stop button - Chip tray on wheels - Cooling system with electric pump - Central lubrication of the guides with automatic pump - Traveling and steady rest - Service tools and wrenches, test certificate, electrical diagram, operating and maintenance manual - Machine built according to EC standards Optional features: - 3- / 4-jaw chuck Technical data: - Center height: 260 mm Fgodopq R Rdjpfx Al Uoh - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing over cross slide: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speed steps: 12 - Spindle speed: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Module threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametral pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Compound slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill travel: 200 mm - Tailstock quill taper: MK5 - Total weight: 3200 kg

Condition: new, Year of construction: 2026, CORMAK 3040x1300 Radial Drill Press The CORMAK 3040x1300 radial drill press is an advanced industrial machine designed for precise drilling operations in materials such as steel and cast iron. The machine features a robust column construction and a wide range of radial arm adjustments, providing excellent stability and flexibility when machining large workpieces. Its key advantage is the ability to drill holes up to 40 mm in diameter while maintaining high precision. Main advantages of the CORMAK 3040x1300 radial drill press Heavy-duty construction weighing 1400 kg – ensures exceptional stability and vibration reduction, resulting in precise drilling and extended cutting tool life. Adjustable radial arm with a reach of 360–1300 mm – enables drilling in large and irregular workpieces without repositioning, increasing flexibility and reducing setup time. MK4 spindle taper with six speed settings (75–1200 rpm) – allows precise adjustment of machining parameters for different materials, enabling drilling holes up to 40 mm in steel and cast iron. 200 mm spindle stroke – allows deep drilling in a single cycle, improving production efficiency. 2.2 kW main motor – provides high torque for reliable continuous operation with optimized energy consumption. 0.75 kW arm lifting motor – enables smooth and fast vertical adjustment of the radial arm at a speed of 1.3 m/min, improving operator ergonomics. Cube worktable measuring 510 × 380 × 305 mm – allows secure mounting of irregularly shaped workpieces, increasing machining safety and accuracy. Ergonomic control panel – positioned at the front of the machine for intuitive operation and quick parameter adjustment, minimizing downtime. Ground column surface – ensures smooth and precise arm movement, eliminating play and improving positioning accuracy. Manual head and arm locking system – increases safety and stability during drilling by preventing uncontrolled movement. Three spindle feed rates (0.10, 0.16, 0.25 mm/rev) – provide precise control of the drilling process according to the material and machining requirements. Standard equipment B16 drill chuck (3–16 mm) Drill chuck arbor B16/MK4 Reduction sleeve MK4/MK3 Drift key Cube worktable 510 × 380 × 305 mm Operating manual Technical specifications Parameter Value Maximum drilling diameter 40 mm Spindle axis to column distance 360–1300 mm Spindle axis to table surface distance 260–1300 mm Spindle stroke 200 mm Spindle taper MK4 Number and range of spindle speeds 6: 75, 130, 240, 380, 660, 1200 rpm Number and range of spindle feeds 3: 0.10; 0.16; 0.25 mm/rev Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Arm lifting motor power 0.75 kW Worktable dimensions 510 × 380 × 305 mm Machine dimensions 800 × 1800 × 2150 mm Fgsdsi D Daqjpfx Al Ujh Weight 1400 kg

Condition: new, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, tool diameter: 60 mm, spindle mount: MK 5, rotational speed (max.): 2,000 rpm, rotational speed (min.): 38 rpm, overall weight: 3,800 kg, Equipment: CE marking, The RD 1600 VARIO radial drilling machine is a professional device for drilling holes in metal, wood, and other materials. Thanks to its high power and robust design, it ensures fast and precise drilling even under the most demanding conditions. The powerful 4.0 kW motor is equipped with a frequency inverter and offers a wide speed range of 38–2000 rpm. The arm, spindle head, and column each feature independent hydraulic clamping. The worktable measures 1740 x 980 mm, and the machine is equipped with automatic spindle feed, a coolant system, and motorized arm height adjustment. Maximum drilling capacity is 60 mm; tapping capacity up to M46. Standard features include stepless speed control with readout on a digital display, high spindle alignment with automatic brake, arm, head, and column all fitted with independent hydraulic clamps, a solid base suitable for machining large workpieces, and a massive, ground column ensuring smooth arm movement. The arm's motorized lifting function allows for series production without changing the spindle position. Control panel buttons allow locking/unlocking the head and column either together or individually. The arm guides are hardened and ground, and the machine's perfect balance ensures ideal feed of the spindle. Ideal for drilling, counterboring, reaming, and tapping. Technical specifications Maximum drilling capacity: 60 mm Maximum tapping capacity: M46 Spindle taper: MT5 Minimum spindle speed: 38 rpm Maximum spindle speed: 2000 rpm Spindle speed change—number of ranges/stepless: Stepless (38–275, 275–2000) Drive method: Gearbox Automatic spindle feed range: (8) 0.06–1.00 mm/rev Min. spindle/column distance: 350 mm Max. spindle/column distance: 1600 mm Spindle/table distance: 165–750 mm Min. spindle/base plate distance: 665 mm Max. spindle/base plate distance: 1250 mm Vertical travel of arm with head: 585 mm Horizontal travel of drilling head: 1250 mm Quill stroke: 325 mm Column diameter: n/a Cube table size: 750 x 500 x 500 mm Base plate working area: 1740 x 980 mm Motor power: 4 kW Voltage: 400 V Dimensions (W x D x H): 2600 x 1100 x 2770 mm Weight approx.: 3800 kg Scope of delivery Cube table MK 5 / B 16 drill chuck Fsdpfx Aleytfxko Uogh Reduction sleeves MK 5/4, MK 4/3, MK 3/2 LED lighting Filled with Shell Tellus 46 oil Coolant system Inverter Digital speed readout Lifting motor Hydraulic motor Guarding Service tools Legally required safety guards Complete operation and maintenance documentation (Polish DTR) CE certificate 24-month full warranty without extra charges