Used Relay for sale (502)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Cabinet Sub-distribution Panel Switch Cabinet Power Distributor Floor Distributor Dimensions: 200x85x22.5 cm incl. plinth Cabinet height without plinth: 190 cm + 10 cm plinth = total height Industrial quality, enclosure made of sheet steel, color 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distribution panels were in operation until recently and underwent annual inspection. Wiring diagram is included. 10 units available. Year of manufacture: 2003 For further data, please refer to the pictures. Dsdpfxeynwx So Ak Aekw Very good condition – almost like new, see photos Collection by appointment only in 75053 Gondelsheim A forklift is available for loading Shipping by freight forwarder possible, please inquire with ZIP code

Condition: new, New, unused ABB soft starter from the PSR series for three-phase motors. Manufacturer: ABB Type: PSR3-600-70 Product type: Soft starter Article number: 1SFA896103R7000 Series: PSR Rated operating current Ie: 3.9 A Operating voltage Ue: 208 to 600 V AC Control voltage Us: 100 to 240 V AC Frequency: 50/60 Hz Motor power at 230 V: 0.75 kW Motor power at 400 V: 1.5 kW Motor power at 500 V: 2.2 kW Circuit type: In-line connection Phase control: 2-phase Start/stop ramp: adjustable via potentiometer Start/stop ramp time: 1 to 20 s Start voltage: 40 to 70 % Output signal: RUN relay output Bypass: integrated Main circuit connections: L1, L2, L3 / T1, T2, T3 Control circuit connections: ST, A1, Run, A2 Dimensions: 45 x 140 x 114 mm Dodpezb Niisfx Ak Askw Net weight: 0.4 kg Manual: available Condition: NOS (New Old Stock)

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: Dsdpfx Akszcxbwe Aokw The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: used, mileage: 146,421 km, power: 130 kW (176.75 HP), first registration: 12/2012, fuel type: diesel, overall weight: 7,490 kg, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,215 mm, total width: 2,205 mm, total height: 2,930 mm, Year of construction: 2012, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal number: #569 Müller HD built-in washing system Mercedes-Benz Vario 818D Superstructure * Müller HD built-in washing system * Approx. 1,000 liters total volume * Drainage: Free outlet High-pressure system * Speck P55/128-160G * Approx. 127 l/min at 160 bar * Reel for washing hose: approx. 100 m DN 19 (3/4") * Washing hose: approx. 80 m DN 19 (3/4") Special features * Analog relay control * Remote control * Hand washing unit * 1 halogen light at the rear * Rotating beacon lights: cab 2x Dkodszd I Ibjpfx Ak Aow Technical data * Mercedes-Benz Vario 818D * 4x2 * 130 kW / 177 hp * 6-speed manual transmission * Color: Gray * Dimensions: approx. 6.2 m × 2.20 m × 2.93 m * First registration: 13.12.2012 * Mileage: 146,421 km * VIN: WDB6703521N146716 For further detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles for SALE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: ready for operation (used), Sennerskov Hydraulic Plywood Press for Sale Heavy-Duty Oil-Heated Hydraulic Press – Fully Operational A robust and well-maintained Sennerskov hydraulic plywood press is offered for sale due to changes in production requirements. Originally manufactured around 1970, the press was extensively upgraded with a modern PLC control system in 2014 and has since been used successfully in plywood manufacturing. The machine is fully operational and can be inspected while running in production. Technical Specifications * Manufacturer: Sennerskov * Year of manufacture: Approx. 1970 * PLC control system installed: 2014 * Press format: 3,650 × 2,150 mm * Daylight opening: 270 mm * Hydraulic cylinders: 20 pcs. * Cylinder diameter: 110 mm * Maximum hydraulic pressure: 230 bar * Heating system: Thermal oil heated * Weight: Approx. 40 tonnes * Included equipment: * Mylar sheets * Feeding table Description This is an exceptionally heavy-duty industrial press designed for continuous plywood and laminated panel production. The machine features a highly rigid construction, ensuring uniform pressure distribution across the entire pressing surface. The press has been used for plywood production and is suitable for a wide range of applications, including: * Plywood manufacturing * Veneered panels * Laminated wood products * Furniture components * Specialty composite panels The press was modernized with a PLC control system in 2014, providing reliable and user-friendly operation compared to older relay-based systems. Condition * Fully operational * Can be inspected under power and in production * Press plates are in excellent condition * Press plates are flat and free from known damage or deformation * Well maintained throughout its service life Dsdpszd Shrefx Ak Aokw

Condition: used, mileage: 197,700 km, power: 120 kW (163.15 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 7,250 mm, total width: 2,200 mm, total height: 3,230 mm, loading space length: 4,480 mm, loading space width: 2,130 mm, loading space height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 38 – You can find this and many more inspected Mercedes-Benz vans on our website: ---- Mercedes-Benz Sprinter 316 CDI MAXI, refrigerated box body with Thermo King V300 Max refrigeration unit, configured for fresh goods transport down to 0°C. Both in-transit and stationary cooling (400 V mains connection) available. The vehicle comes from first ownership and has a complete Mercedes-Benz service history. General inspection/emissions test (TÜV) NEW – valid until 04/2028. Maintenance carried out exclusively at Mercedes-Benz at 55,000 km, 120,000 km, and 180,000 km. Permissible gross weight: 3,500 kg Kerb weight: 3,000 kg Payload: 500 kg Cargo area (LxWxH in cm): 448 x 213 x 219 Emission standard: EURO 6 Long wheelbase: 4,325 mm VIN: WDB9071351N061500 All-season tires 1 key -- * Mercedes-Benz Sprinter 316 CDI MAXI -- * Refrigerated box body for fresh goods -- * Thermo King V300 Max refrigeration unit -- * In-transit and stationary cooling -- * Air conditioning -- * Heated windscreen -- * Reinforced front axle -- * MBUX -- * Navigation system -- * Electric windows -- * Electrically adjustable exterior mirrors -- * Airbag -- * Central locking Changes, errors, and prior sale excepted. Dkedsy Ikyqspfx Ak Ajw Special equipment: - Second battery (auxiliary) in cabin - Extended mounts for exterior mirrors left/right - Suspension: Stabilization Level II - Terminal strip for electrical connections (below driver’s seat) - Diesel fuel filter with water separator - Engine front PTO with bracket for additional refrigeration compressor - MBUX multimedia system (7" touchscreen) - Navigation system for MBUX - Smoker package - Tire pressure monitoring system - Spare wheel (mounted), holder under frame incl. jack - Front mud flaps - Driver’s cabin: comfort driver’s seat - Start/stop engine system - 230 V socket in driver’s cabin - Separation relay for additional battery - Fleece battery 92 Ah - Reinforced front axle - Jack - Heat-insulating glazing (windscreen with upper band filter) Further equipment: - Stowage above windscreen - Stowage below dashboard passenger side - Rear towing eye - Adaptive brake light - Driver airbag - Traction control (ASR) - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both) - Outside temperature display - Brake assist - Roof lining in driver’s cab - Automatic headlight activation - Electronic brake force distribution (EBV) - Driver assistance system: Crosswind Assist - Body/chassis: Standard flatbed - Keyless start - Communication module (LTE) for digital services - Fuel tank: main tank 71 liters - Steering column mechanically adjustable - Headlight range adjustment - Truck registration - Side marker lights - Mercedes-Benz emergency call system - Engine 2.1 l – 120 kW CDI CAT - Wheelbase 4,325 mm - Low emissions as per Euro 6 standard - Seat belt system with warning (driver side) - Seat covers/upholstery: fabric - Adjustable passenger seat in cab - ASSYST maintenance interval indicator - Perm. gross weight 3.5 t

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: Dkodpfx Aexvca Ask Aew A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, Core Drive Specifications NXI: NX Inverter Unit. It is designed to be fed by a shared, common DC bus arrangement rather than direct AC mains input. 0072: 72 Amps Nominal Current Rating.Low Overload (Pumps/Fans): Continuous maximum output of 72 A. High Overload (Heavy Duty): Continuous maximum output of 61 A. 5: Mains Voltage Class. Rated for 380 V to 500 V AC grid systems (which corresponds to a DC bus voltage range of 465 V to 800 V DC). A: Includes the Standard Alpha-numeric Control Keypad. 5: IP54 (NEMA 12) Enclosure Class. This offers strong, dust-protected, splash-resistant defense for hash operational environments. T: Standard EMC Emission Level adhering to the IEC61800-3 specification for IT networks. 0: No integrated brake chopper. C: Physical frame generation / module sizing designated as Frame FR7. Internal Hardware & Control Boards (SVA1AF00000) The suffix code segment details the exact internal logic, system software, and factory expansion board routing layout: S: Air-cooled design system. V: Internal coating option. It features varnished/coated circuit boards for moisture and corrosive air resilience. A: Standard Vacon System Interface architecture setup. 1AF00000: This sequence identifies the specific hardware configuration across the control expansion slots (A, B, C, D, and E):A1: OPT-A1 Basic I/O Board installed in Slot A. It provides 6 digital inputs, 1 digital output, 2 analog inputs, 1 analog output, +10V reference voltage, and a +24V auxiliary supply. AF: OPT-AF Dual Relay Output Board installed in Slot B. It provides 2 programmable changeover relay outputs (NO/NC configuration). Dkodpfxsy Ud Afs Ak Aew 00000: Slots C, D, and E are left empty from the factory, giving you expansion headroom for fieldbus communications (such as Profinet or EtherCAT) if needed Brand new never used. Please check out our other listings as well.

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz Dodpfx Asw Nablok Askw · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: like new (used), Year of construction: 2003, functionality: fully functional, overall weight: 80 kg, total height: 2,000 mm, total width: 600 mm, type of input current: three-phase, input voltage: 400 V, control cabinet height: 1,900 mm, input current: 100 A, 1x Siemens Sikus 630 Power Distribution Panel, Sub-Distribution Board, Control Cabinet, Distribution Box, Floor Distribution Cabinet Dkedpfx Ajynwxxsk Aow Dimensions: 200x60x22.5 cm including distribution base Cabinet height without base: 190 cm + 10 cm base = total height Industrial quality, housing made from sheet steel, color RAL 7035 light grey Fully wired with main switch, surge protection, fuses, relays, and outgoing terminals. The distributors were in use until recently and had annual inspections. A wiring diagram is included. A total of 10 units available. Year of manufacture: 2003 For further data, please refer to the images. Very good condition – almost like new, see pictures. Collection only by appointment in 75053 Gondelsheim. Forklift available for loading Shipping by freight carrier possible, please inquire with your postal code.

Condition: new, Manufacturer: Schmersal Product series: PROTECT PSC1 Type: PSC1-C-100-FB1-PNPS Article number: 103011996 Device type: Programmable safety controller Supply voltage: 24 V DC Safety level: PL e Safety level: SIL 3 Dodpfx Akezcguxo Aokw Safe inputs: 14 Safe semiconductor outputs: 4 Signal outputs: 6 Safety relay outputs: 2 Communication protocols: EtherCAT, Ethernet/IP, PROFINET IO, PROFIsafe Mounting type: DIN rail Dimensions: 112.5 × 100 × 115 mm Weight: 630 g Available quantity: 6 pieces

Condition: used, Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector, circuit breaker, circuit breaker -Manufacturer: Merlin Gerin, circuit breaker type compact C630NI -Drive: 230 V/AC Dsdpfx Akefubxae Askw -Triggering: MX triggering via a relay or button with 24 VDC -Current strength: 630 A -Dimensions: 290/155/H250 mm -Weight: 10.4 kg

Condition: used, PLC control, digital output, digital output, Relay Output Dsdpjh Ap A Isfx Ak Aokw -Manufacturer: Siemens, Simatic S5 digital output -Type: 6ES5 452-8MR11 -Number: 4x module available -Price per piece -Dimensions: 140/110/H50 mm -Weight: 0.3 kg/pc

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Klöckner Moeller, Auxiliary contactor Cntactor Relay unused Ovp -Type: DIL ER-22-G -Voltage: 60 VDC -Number: 19x contactors available Djdpfxer Im R He Ak Ajkw -Price per piece -Dimensions box: 60/50/H60 mm -Weight: 0.2 kg/piece

Condition: used, mileage: 230,870 km, power: 120 kW (163.15 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 4,285 kg, maximum load weight: 715 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,665 mm, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.3 l/100km, fuel consumption (extra-urban): 9.1 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 4, total length: 6,450 mm, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Year of construction: 2013, construction height: 2,980 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, traction control, The Mercedes-Benz Sprinter II 516 CDI is a used ambulance with automatic transmission and Euro 5 emissions standard. The vehicle was first registered on May 30, 2013 and has a mileage of 230,870 km. The diesel engine with a displacement of 2,143 cc produces 120 kW (163 hp). The car stands out in terms of color with its yellow-red daylight fluorescent color. Special features include air conditioning, Eberspächer auxiliary heating and bi-xenon headlights with cornering lights. The Sprinter offers reinforced front and rear axles, a 75-liter fuel tank and twin tires on the rear axle for greater stability. In the interior it is equipped with an Audio 20 radio, adjustable exterior mirrors with integrated indicators and a heat-insulated driver's cabin. The vehicle has a combined fuel consumption of 9.9 l/100 km Dkedpfx Akor Uznys Aow and CO2 emissions of 262 g/km. It has 4 seats, 4 doors and measures a total of 6,450 mm in length, 2,150 mm in width and 2,980 mm in height. Special equipment: 1 DIN slot at the front under the roof liner, passenger side airbag, starting aid (hill start assist), Audio 20 audio system (radio with CD player), exhaust in front of the left rear axle, outside temperature display, additional battery (reinforced), bi-xenon headlights with cornering light, 220 A generator, steering wheel (steering column mechanically adjustable), parameterizable special module, inside rear view mirror, rear wall with window, front mud flaps, reinforced rear stabilizer, reinforced front stabilizer, fuel level sensor for additional heating, cut-off relay for additional battery, rear wall paneling, fleece battery 95 Ah, preparation for mobile phone/cell phone/comfort telephony, reinforced front axle, thermal insulation in driver's compartment, additional heating (hot water) Other equipment: Adaptive brake light, driver's side airbag, washer fluid level display, electric outside mirror. adjustable and heated, both, exterior mirrors with integrated indicator light, battery 74 Ah, brake assistant, braking system with ABS+ASR, roof paneling in the driver's cab, lockable glove compartment, body/structure: flatbed, fuel tank: main tank 75 litres, headlight range control, truck registration, engine 2.1 litres - 120 kW CDI KAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 5 emissions standard, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, Assyst maintenance interval display, heat-insulating glazing, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle. CoC available Equipment was determined using a VIN query, errors can occur here for technical reasons Sale only to commercial operators (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed truck with loading crane, immediately available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the complete vehicle with loading crane and aluminum flatbed approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning - Auxiliary drive with speed increaser - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720mm x 1820mm x 400mm - Floor panel 18mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m = 815kg, at 4.40m = 575kg, at 5.60m = 400kg, at 6.80m = 300kg, at 8.05m = 220kg - Design according to CE directive (EN 12999) - Swivel range 370° (mechanical swivel range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome-plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling by 30° and 180° - CE, incl. M.O.L. - Load hook and attachment brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions Dodpfx Ajywzygjk Aokw - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs (by 80mm) - Mechanical arm extension, lifting capacity 1.30m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Reversing camera with Carplay, shovel holder, 90° rope, ladder carrier / transport frame for front or rear wall, additional storage boxes available. Subject to errors and prior sale. ... Climate control, automatic climate control, VAT can be shown separately, ASR, ABS, trip computer, electric windows front, electric immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, spare wheel, twin tires, cab: short cab, electric windows, work lights, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, emission sticker: 4 - Green, reversing camera

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 135930-100, clamping force: 4,000 kN, screw diameter: 55 mm, clearance between the columns: 800 mm, column diameter: 125 mm, displacement volume: 546 cm³, injection pressure: 2,041 bar, injection weight: 497 g, mold height (min.): 350 mm, ejector force: 65,000 N, ejector stroke: 200 mm, opening stroke: 780 mm, plate length: 1,160 mm, plate width: 1,060 mm, installation height: 1,130 mm, total length: 7,650 mm, total width: 2,150 mm, total height: 2,300 mm, overall weight: 14,400 kg, heating capacity: 23.1 kW (31.41 HP), pressure: 240 bar, power: 45 kW (61.18 HP), Model: TM 400/1330 Year: 2014 Manufacturer: Wittmann Battenfeld Country of origin: Austria Weight: 14,000 kg Clamping force: 4000 kN (400 tons) Dodpeyw T Txsfx Ak Askw Hydraulic system pressure: 250 bar Control system voltage: 24 V Power supply: 50 Hz, 3-phase Largest motor FLA Electrical cabinet: includes servo drives, safety relays, and hydraulic control boards

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ LEASE ++ BUY ++ LEASE ++ BUY ++ LEASE ++ BUY ++ Mercedes Benz Sprinter 519 CDI with Leistikow B55 High-Pressure Cleaning System Internal Number: #527 Leistikow B 55 * Auxiliary drive from the Sprinter * High-pressure pump AQUABAR KF32/36 * Approx. 120 liters/minute at 170 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN19 * 2nd hydraulic HD hose reel for approx. 80m DN13 * Filling hose reel with approx. 60m DN20 * Approx. 1,600 liter water tank * Low water level protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED warning lights * Various storage options * Adjustable heavy-duty shelf * Standard cleaning nozzle equipment Djdpfx Akoyzllbs Aokw Special equipment: 2nd battery (auxiliary battery) in the engine compartment, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, tachograph operation in front under the headliner, chassis: stabilization level II, all-weather floor mats, vehicle without lashing eyes, gearbox lock for auxiliary drive, cup holder in front, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), comfort lighting in the passenger/cargo area, charging package dashboard (USB connections and 12V socket additionally), cable duct on the rear portal, cable duct on the side wall, navigation system for MBUX multimedia system, fog lights with cornering light, auxiliary drive 2 B with reduction gear, parameterizable special module, cross member with integrated step, sliding door cargo/passenger area left, mud flaps at the rear, seats in the cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay for battery additionally, front axle reinforced, preparation for gearbox oil cooler, winter package, power assist for sliding door left, power assist for sliding door right Additional equipment: 3rd brake light, storage compartment above the front window, storage compartment below the dashboard passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assistant, outside temperature indicator, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact switch, automatic switching of headlights, entry handle on the rear pillar on the right, entry handle for the sliding door on the cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: start-up information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: Intelligent Speed Assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, speed limiter 90 km/h, body/superstructure: van high roof standard, instrument cluster with color display, communication module (LTE) for digital services, fuel

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor Dedpfxoy Aty As Ak Aekw -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc.

Condition: new, mileage: 50 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,490 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ FOR SALE ++ FOR SALE ++ FOR SALE ++ FOR SALE ++ FOR SALE ++ Mercedes Benz Sprinter 417 CDI Downrated to 3.5t with Rockstroh Drain Jet 100-1 high-pressure cleaning unit Internal Number: #508 Rockstroh Drain Jet 100-1 * Auxiliary drive from the Sprinter * High-pressure pump Pratissoli KF28 * Approx. 93 liters/minute at 210 bar (38 kW) * Pressure regulating and safety valve * Hydraulic HD hose reel for approx. 80m DN16 * Filling hose reel with approx. 40m DN20 * Approx. 1,000 liter water tank * Low water protection * Electric filling system and overflow protection * Electronic speed control * Bypass circuit * Remote control * Electromagnetic clutch * Diesel auxiliary heater Djdpfxezaypks Ak Askw * LED work spotlight * LED interior lighting * LED revolving beacon * Various storage options * Impermeable plastic floor covering with anti-slip surface * Standard cleaning nozzles Special equipment: 2nd battery (auxiliary battery), interior, 3-button remote control for central locking, trailer socket 13-pin, battery disconnect switch 1-pole, driving assistance system: traffic sign recognition, suspension: stabilizer level III, parking brake electric, all-weather floor mats, vehicle without lashing eyes, transmission lock for auxiliary drive, front cup holder, grab handles A-pillars, additional main key, rear door (opening angle 270 degrees), folding cover for storage compartment, terminal block for electrical connections (driver's seat box), comfort lighting in passenger/cargo area, charging package dashboard (USB ports and 12V socket additionally), cable duct on rear portal, cable duct on side wall, navigation system for multimedia system MBUX, auxiliary drive 2 B with reduction gear, parameterizable special module, crossmember for trailer coupling, crossmember with integrated step, seats in the driver's cab: co-driver's seat comfort, seats in the driver's cab: driver's seat comfort, fuel gauge for auxiliary heater, separation relay with battery additionally, front axle reinforced, preparation for transmission oil cooler, permissible gross weight 3.88 t, sliding door assistance right Additional equipment: 3rd brake light, storage compartment above front windshield, storage compartment below dashboard passenger side, adaptive brake light, airbag passenger side, airbag driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, exterior mirrors electrically foldable, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assist, outside temperature display, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, automatic activation for headlights, grab handle on rear pillar rear right, grab handle for sliding door on cargo area partition, driving assistance system: turning assistant, driving assistance system: active brake assist, driving assistance system: active lane keeping assist, driving assistance system: intersection information assistant, driving assistance system: Attention Assist (fatigue detection sensor), driving assistance system: intelligent speed assistant, driving assistance system: breakdown management, driving assistance system: crosswind assist, digital tachograph, generator 250 A, body/superstructure: standard van, instrument cluster with color display, communication module (LTE) for digital services, fuel tank: main tank 93 liters, cargo area partition continuous, steering wheel with multifunction, truck registration, marker l

Condition: good (used), Full Automatic filling and wrapping machine for mini hotel portions butter in aluminum foil or parchment paper. Product feed by hopper and agitator. Photo cell for print centring . No date coder. Outfeed conveyor of 85 cm. pack format: 40x30x9mm height adjustable, set for 10gr gram. Main motor 2,2 kW. Control panel with relay, operationel button controlled directly on machine. Outfeed conveyor with semi automatic packer (Benhil model: 8534). Pack size: 5x4x5 = 100 packs per carton box = 1 kg per carton box. Testmovie available. Dodszhl Efepfx Ak Ajkw

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: - Pressing force: 63 tons - Working area: 1200 mm x 650 mm Djdpfx Ajyryzdok Ajkw - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available.

Condition: used, mileage: 229,050 km, power: 140 kW (190.35 HP), first registration: 12/2010, fuel type: diesel, overall weight: 5,000 kg, color: red, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,945 mm, total width: 1,993 mm, total height: 2,815 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, Internal vehicle number: 4841 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Use the YouTube link to view the vehicle completely, inside and out: Dsdpfxszkpbis Ak Aekw 1st owner, German vehicle, non-smoker vehicle Complete and consistent service history exclusively at Mercedes Benz Permissible total weight: 5,000 kg Engine: 3.0 L - 140 kW V6 Twin tires Manufacturer: Rockstroh Fahrzeugbau GmbH Type: Drain-Jet 100 PE water tank: 600 - 1,200 l Pump drive: Auxiliary drive (PTO) High-pressure system: Safety valve Application area: up to DN 350 Inverter "Flamezum" 4000W/8000W Self-propelled work machine: IPEK SPEZIAL TV Remote control Sewer cleaning nozzles Additional hose reel Backup power supply "UPS" Tool rack "Sortimo" 230-volt sockets Battery charger Trailer hitch Rear view camera Cruise control Regulated air conditioning (Tempmatik) Auxiliary heater Seat heating Sliding door on both sides Parameterizable special module Sliding door assist Comfort driver's seat LED work lights in the cargo area ---- Special equipment: * Radio preparation * Two-way speakers at the front * Storage compartment in the headliner of the driver's cab * Hill start assist * Trailer hitch: fixed ball head * Trailer socket 13-pin * Antenna for GSM, GSP and UMTS networks * Outside temperature display * Additional battery (reinforced) * Roof control unit with reading spot on driver/passenger side * Roof light in the cargo area with door contact * Anti-theft alarm * Generator 180 A * Cruise control * Gearbox lock for auxiliary drive * Rear door (opening angle 270 degrees) * Folding cover for storage compartment * Regulated air conditioning (Tempmatik) * Fog lights * Auxiliary drive 2 B with reduction gear * Parameterizable special module * Sliding door cargo/passenger compartment left * Seat cover / upholstery: artificial leather (driver's cab) * Seats in the driver's cab: driver's seat heated * Seats in the driver's cab: driver's comfort seat * Stabilizer bar at the rear * Reinforced stabilizer bar at the front * Fuel level sensor for auxiliary heater * Separating relay with additional battery * Rear door step * Rear wall lining * Fleece battery 95 Ah * Preparation for transmission oil cooling * Thermal protection glazing (windshield with band filter at the top) * Sliding door assist left * Sliding door assist right Standard equipment: Body/Structure: Standard high-roof van, rear wing doors raised and high roof, 3rd brake light, Adaptive brake light, Driver airbag, Anti-lock braking system (ABS), Drive type: Rear-wheel drive, Washer fluid level indicator, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assist, Braking system with ABS+ASR, Headliner in the driver's cab, Electronic stability program (ESP), Electric windows 2-way, 6-speed transmission - TSG (Eco Gear), Lockable glove compartment, Child safety lock, Fuel filter with water level sensor, Fuel tank: main

Condition: used, Year of construction: 2023, ---- Demonstration unit A total of 3 units available: AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583713 Serial No.: ESF373329 Year of manufacture: 2023 AC generator QAS30 KD S5 50Hz 400V3PH EQ: 100583714 Serial No.: ESF373330 Year of manufacture: 2023 Equipment: Language pack 3 EN+DE+NL+FR+IT 5-pole sockets 63 A ELP-B 32?16 A + DS DS-RIM 3P 16A Insulation monitoring relay Dkedpfx Ajzkz Diek Aew Battery disconnect switch Operating manual, German

Condition: new, Year of construction: 2026, overall weight: 100 kg, total height: 100 mm, total width: 900 mm, total length: 800 mm, power: 1.5 kW (2.04 HP), The XHS-series Vertical Mixer is designed for fast and uniform mixing of plastic granules, masterbatch, recycled materials, and additives before processing. Its efficient paddle mixing system provides excellent blending performance while minimizing energy consumption. The mixer features a durable stainless steel hopper and mixing blades, ensuring long service life, easy cleaning, and contamination-free material handling. It is suitable for extrusion, injection molding, blow molding, compounding, and plastic recycling applications. Technical Specifications • Model: XHS-50V • Hopper capacity: 50 L • Mixing capacity: 20 kg per batch • Mixing time: 20 kg in 6–8 minutes • Mixing motor power: 1.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 800 x 900 x 1000 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 100 kg • Control system: Control box with timer relay • Model: XHS-100V • Hopper capacity: 100 L • Mixing capacity: 40-50 kg per batch • Mixing time: 50 kg in 6–8 minutes • Mixing motor power: 3 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 960 x 1000 x 1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 150 kg • Control system: Control box with timer relay • Model: XHS-150V • Hopper capacity: 150 L • Mixing capacity: 50-70 kg per batch • Mixing time: 75 kg in 6–8 minutes • Mixing motor power: 4 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1080 x 1080 x1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 210 kg • Control system: Control box with timer relay Dedpozvxl Ijfx Ak Aokw • Model: XHS-250V • Hopper capacity: 250 L • Mixing capacity: 100–120 kg per batch • Mixing time: 120 kg in 6–8 minutes • Mixing motor power: 7.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1400*1200*1550 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 290 kg • Control system: Control box with timer relay Efficient Mixing System The XHS-250V uses horizontally rotating stainless steel paddles that provide fast and homogeneous mixing of plastic materials. The paddle geometry is designed to maximize mixing efficiency while keeping power consumption low. The robust mixing blades offer excellent wear resistance, long service life, and can be cleaned quickly between production batches. Easy Material Discharge The mixer is equipped with a bottom discharge outlet, allowing quick and convenient unloading of mixed material directly into containers, vacuum loaders, or processing equipment.