Used Revolver for sale (291)

Condition: excellent (used), Here we offer a Feutron climate test cell. Pgsdpfx Afsklv H Is Ijg Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, mileage: 391,120 km, power: 368 kW (500.34 HP), first registration: 08/2018, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, traction control, Permissible gross weight: 18,000kg, leaf-air suspension, retarder, digital tachograph, fifth wheel coupling: JOST JSK 37 C, PTO: MAN 651P with pump connection 1.28/1.58 700 Nm, noise reduction: noise level measures 80 dB (92/97 EEC), MAN BrakeMatic, brake assist: Emergency Brake Assist 2, electronic stability program ESP, traction control ASR, automatic climate control, stationary air conditioning, distance cruise control, auxiliary heater: EBERSPAECHER D4S, comfort driver's seat, air-suspended driver's seat, driver's armrest, heated driver's seat, headlight range adjustment, radio: MAN Media Truck, AUX & USB connection: Bluetooth audio streaming, Bluetooth hands-free preparation, Lane-Guard system LGS, multifunction steering wheel, adjustable steering column, driver's lumbar support, alloy wheels: ALCOA matte, electric windows front (2x), electrically operated sliding/tilting sunroof, fog lights, electric and heated exterior mirrors, electric and heated kerbside mirror: right, electric and heated wide-angle mirror, immobilizer, central locking with remote control, tinted windows: side windows tinted from B-pillar, rear differential lock, front underrun protection, sun visor, spare wheel: 10-hole 9.00-22.5, refrigerator, revolving beacon: 2, yellow, work lights: 2, ambient lighting, hill start assist: EasyStart, daytime running lights, spare wheel holder, 1x15-pin connector, front cup holders, Safety Package Plus, decorative aluminum trims: brushed, cornering light, carpet flooring: over engine tunnel, insulated cab: NORDIC, RIO Box, electronic speed limiter: 89 km/h + 1 km/h tolerance, voltage converter, suspended cab, front springs parabolic 7.5 t, rear air suspension 13 t, instrument cluster km/h 'High-Line color', rear axle hypoid HY-1350, HY axle ratio i = 2.71, tipper control in cab, control module for external data exchange (KSM), air compressor 2-cylinder, regulated engine brake (EVBec) 3-stage, flame start system, steel air reservoir, compressed-air connection in cab, compressed-air hose... Pgedoyac Ucjpfx Af Ijg

Condition: new, mileage: 490 km, power: 100 kW (135.96 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 2 m³, loading space length: 3,500 mm, loading space width: 2,070 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Model Year * Model Year: 2024 Transmission * Manual transmission, 6 gears Driver Assistance Systems * Rear parking aid * Reversing camera * Driver fatigue detection Lighting and Visibility * Headlight beam adjustment * Rain sensor * Tinted windows * Daytime running lights * Light sensor Audio & Communication * Radio * Digital radio reception DAB * AUX & USB ports * Bluetooth hands-free kit * Smartphone app integration Exterior * Leaf spring suspension * Drive: rear-wheel drive * Towing hitch, ball type * Exterior mirrors, electrically adjustable and heated * All-season tires * 1x13-pin connector: preparation * Drop-side body with foldable sides Safety * Driver / passenger airbag * Electronic Stability Program (ESP) * Traction control (ASR) * Anti-lock braking system (ABS) * Tire pressure monitoring system * Immobilizer * Emergency brake assist Interior * Fabric seats * Multifunction steering wheel * On-board computer * Rubber flooring Comfort * Air conditioning * Height-adjustable driver’s seat * Driver’s armrest * Passenger bench seat * Power steering * Adjustable steering column * Power windows Psdpoxumqpofx Af Ijgg * Central locking with remote control * Cup holders Cargo Area * Length 3,500 mm, width 2,070 mm, height 400 mm * Volume 2 m³ Other Dimensions and Weights * Permissible gross weight: 3,500 kg * Total towing weight: 7,000 kg * Wheelbase: 3,450 mm ----- Special price - New vehicle / New Model MY24 - 3 years manufacturer’s warranty up to 75,000 km - Detailed offer available on request - Financing / hire purchase / leasing available on request at top conditions - WRV / maintenance contract available individually for an additional fee. - Optional extras such as revolving beacons, strobe lights, work lights, etc. available on request - Delivery possible at extra cost - Subject to prior sale - Your contacts: - Mr. Axel Scheske, tel. Mr. Luca Netter, tel.

Condition: good (used), live center, live center, live morse taper, live center, live lathe center, live center, centering cone Pgsdpewuyl Njfx Af Ieg -Revolving center: Mounting MK6 -Type: unfortunately without type designation -Centering tip: Ø 150 mm -Dimensions: Ø 150 x 300 mm -Weight: 10.5 kg

Condition: used, mileage: 566,269 km, power: 340 kW (462.27 HP), first registration: 04/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 6,640 mm, loading space width: 2,440 mm, Year of construction: 2015, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Body/crane: Flatbed with container locks * Dimensions: 6,640 mm x 2,440 mm * Raised front wall * Fassi crane F365A.2.25, folded at the rear * 4-point outrigger system * Radio remote control * 5 hydraulic extensions * Storage boxes Outreach/lifting capacity: 2,400 mm = 11,500 kg, * 3,150 mm = 9,500 kg * 4,600 mm = 7,040 kg * 6,450 mm = 4,830 kg * 8,400 mm = 3,560 kg * 10,400 mm = 2,785 kg * 12,400 mm = 2,285 kg * 14,600 mm = 1,865 kg Features: * 2 beds * Air conditioning * Stationary air conditioning * Auxiliary heater * Heated comfort driver’s seat * 40 mm trailer coupling with full brake system * Rear axle differential lock * Intarder * Light bar with revolving beacons * Radio with multifunction steering wheel * Additional headlights Other information: * First registered in Germany * 1 previous owner * Payload 5,760 kg as per registration Since 1972, your reliable partner for all things automotive/commercial vehicles in 28832 Achim near Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing solutions with special low rates. On request, we will gladly prepare a tailored offer for you! We welcome trade-ins of your commercial vehicle or construction machine. Pgedpfsqk S U Hsx Af Ieg If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our listed offers are generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle is possible via our external partners (additional cost applies). The details provided in advertisements, online listings, price tags, and photos are non-binding descriptions and do not constitute guaranteed characteristics. The seller does not assume liability/warranty for typographical or data transmission errors. Stated equipment must be verified separately if necessary. Subject to change and prior sale.

Condition: used, mileage: 557,799 km, power: 375 kW (509.86 HP), first registration: 02/2020, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, permissible total weight: 18,000 kg, partial leather seats, leaf-air suspension, retarder, digital tachograph, fifth wheel coupling: JOST JSK 37 C, low-noise: noise measure 80 dB (92/97 EEC), MAN BrakeMatic, brake assist, electronic stability program ESP, traction control ASR, automatic climate control, stationary air conditioning, MAN Media Pack Navigation, adaptive cruise control ACC with Stop and Go, auxiliary heater: EBERSPAECHER D4S, comfort seat driver/passenger, air-suspended driver/passenger seat, armrest driver/passenger, heated seat driver/passenger, headlight range adjustment, radio: MAN Media Truck Advanced, AUX & USB connection: SD card reader, sound system, Bluetooth hands-free kit, Lane Guard System LGS, multifunction leather steering wheel, adjustable steering column, lumbar support driver/passenger, electric window regulators (2x), glass sunroof, electric, fog lights, electric and heated exterior mirrors, electric and heated kerb mirror (right), electrically adjustable and heated wide-angle mirror, immobilizer, central locking with remote control, tinted windows: side windows tinted from B-pillar, rear axle differential lock, underrun protection: front, sun visor, aerodynamics package, cool box, revolving warning light: yellow, work lights, ambient lighting, hill start assist: EasyStart, LED daytime running lights, spare wheel holder, connection socket 1x15 pin, front cup holders, safety package Plus, aluminum trim: brushed, cornering lights, carpet flooring: on engine tunnel, cab insulated: NORDIC, RIO Box, speed limiter: electronic speed limiter 90 km/h, inverter, suspended cab, front springs parabolic 8.0 t, rear air suspension 13 t, instrument panel km/h 'High-Line color', rear axle Hypoid HY-1350, HY axle ratio i 2.53, 1-cylinder air compressor 360 ccm with economy system, regulated rocker lever brake (EVBec) 3-stage, steel bumper, steel air tanks, compressed air connection in cab, compressed air hose and air gun, ADR wiring for tanker, ADR Pjdpfx Afox Hclij Iogg

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Pgjdpfx Afouydgo Ijg Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: used, mileage: 714,036 km, power: 355 kW (482.67 HP), first registration: 01/2018, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, According to our "General Terms and Conditions of Business" and without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, error, or typographical mistakes, and on a non-binding basis until conclusion: DAF XF 480 SSC LL Tractor Unit Pgodex Sa U Sspfx Af Ieg (Vehicle 20) First registration: 10.01.2018 Mileage: 714,036 km Engine: 12,902 cc Power: 355 kW / 480 hp Euro 6, C, M, N MOT (TÜV) valid until 01/2027, safety inspection (SP) until 07/2026 Permissible gross weight: 19,000 kg Unladen weight: 8,357 kg Payload: 10,643 kg Overall length: 5,840 mm, overall width: 2,550 mm, overall height: 3,060-4,000 mm Axle load front: 7,500 kg, rear: 11,500 kg Rear towing eye Roof-mounted stationary air conditioning Roof-mounted revolving beacon Roof spoiler, side fenders, sun visor LED daytime running lights Auxiliary headlights Full air suspension Front tyres: 315/60R22.5 approx. 70%, rear tyres: 295/60R22.5 approx. 80/80% Front tyres: Michelin, rear tyres: Conti Hybrid Dual fuel tanks Sleeper cab with 2 beds Traxon (automatic gearbox) 2 x electric windows, electric mirrors, heated mirrors Radio/CD/CB-radio Multifunction steering wheel ZF Intarder Refrigerator + storage compartment Adaptive cruise control with emergency braking assist, lane-keeping assist Lane assist sensor will be replaced Sound system Hands-free telephone system Automatic climate control, auxiliary heater Central locking with remote control Driver's seat heating Price: €15,000.00 (net) All information provided without guarantee or warranty. Our "General Terms and Conditions of Business" apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the District Court of Ludwigslust; for disputes exceeding this value, it is the Regional Court of Schwerin. Subject to prior sale, error, and typographical mistakes.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 4209.08, turning diameter: 670 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 440 mm, travel distance Z-axis: 2,000 mm, controller model: Heidenhain Manual Plus 4110V2, TECHNICAL DETAILS Maximum turning diameter: 670 mm Travel X-axis: 440 mm Travel Z-axis: 2,000 mm Rapid traverse Z-axis: 5 m/min Rapid traverse X-axis: 10 m/min Spindle bore: 106 mm Speed range: 1 – 2,000 rpm Spindle power: 33 kW Spindle mount: DIN 55026 – A8 Turret mount: Quick-change toolholder Multifix type C Number of turret stations: 1 Tailstock taper: MT5 MACHINE DETAILS Control system: Heidenhain Manual Plus 4110V2 Dimensions & Weight Machine dimensions (L x W x H): 1.9 m + center distance x 2.1 m x 1.9 m Control cabinet dimensions (L x W x H): 1.2 m x 0.5 m x 1.6 m Weight: 5,100 kg EQUIPMENT Ethernet and USB interface for network connectivity Chip conveyor Fixed and traveling steady rest Self-centering 3-jaw chuck (diameter 400 mm) Independent 4-jaw chuck (diameter 600 mm) Faceplate (diameter: 650 mm) Various clamping jaws and top jaws Fixed and revolving centers Approx. 30 Multifix holders type C Drill chuck with MT5 shank Pedpfjx Ex A Uex Af Ijgg

Condition: used, functionality: fully functional, mileage: 55,000 km, power: 170.64 kW (232.01 HP), first registration: 12/1991, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, Year of construction: 1991, Equipment: all wheel drive, parking heater, From our immediately available used vehicle inventory, we offer you: Fire engine LF 16/12 4x4 all-wheel drive, 1,600 l water tank, on MAN 14.232 chassis General information: • Year of manufacture: 1991, first registration: 12/1991 • Mileage: approx. 55,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.232, 4x4 all-wheel drive, 232 HP • Diesel engine with manual gearbox and power steering • Towing hitch Psdpoxflnhofx Af Isgg Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Mountings for 2 self-contained breathing apparatus facing against the direction of travel • Mountings for 2 self-contained breathing apparatus facing the direction of travel • Auxiliary heater Bodywork: • Built by Ziegler • LF 16/12 superstructure according to DIN standard • Two spacious side equipment lockers per side • Fold-out steps for side equipment compartments • Mountings for standard equipment • Hose reel carriage fitment • Storage racks for extension and sliding ladders on the roof Firefighting pump/extinguishing agent tank: • Ziegler FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 1,600 l • Foam agent tank 400 l Firefighting equipment: • Rigid rapid intervention line (top, G6) • Roof monitor • Built-in foam inductor Safety and lighting: • 2 blue revolving warning beacons • Siren system • Crew and locker compartment lighting • Surround lighting • Auxiliary spotlights • Rear view camera • Rear warning system • Light mast 2 x 1000 Watts (operated by generator) • Hygiene board available on request We would be pleased to make you a detailed offer and give you a full presentation of the vehicle at our premises in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: excellent (used), Year of construction: 2020, spindle bore: 132 mm, travel distance X-axis: 350 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 3,060 mm, Tool eye Samchully 3 chuck 400 mm SMW Steady rest 35 - 340 mm Chip conveyor  AR Filtration system 20 m3 Optional WTO Tooling package Optional WTO Driven tool holders  Max. turning Ø: 975mm X-Axis: 350mm Y-Axis: 200mm Z-Axis: 3060mm Spindle bore: 132mm Speedrange: 2000Rpm Spindle power: 30kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:10kW Chip conveyor: Yes Tool eye: Yes Pinole taper: Mk5Mk Stroke pinole: 150mm Quill Ø: 160mm Pgodpfx Afox Ei Rvo Isg Length: 6800mm Width: 2374mm Height: 2660mm Weight: 22000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2022, turning length: 1,650 mm, spindle bore: 181 mm, travel distance X-axis: 470 mm, Tool eye SMW 3 chuck 630-165 mm SMW Steady rest 85 - 350 mm LNS Chip conveyor DORMATEC Air Filter 30 m3 Max. turning Ø: 1030mm X-Axis: 470mm Z-Axis: 1650mm Spindle bore: 181mm Speedrange: 1500Rpm Spindle power: 41kW ATC / revolver: 12 Speed live tools:3000Rpm Pjdpfx Afsx Eivpo Isgg Power live tools:9kW Chip conveyor: yes Tool eye: yes Pinole taper: 6Mk Stroke pinole: 150mm Quill Ø: 160mm Length: 7350mm Width: 3160mm Height: 2800mm Weight: 22000kg

Condition: new, Year of construction: 2025, The CORMAK NST2131-16D LOADING/UNLOADING CNC milling machine machining center was created for companies that prioritize high processing power, economic efficiency and machine reliability. This automatic nesting center offers huge possibilities, especially in its most popular version, equipped with an innovative storage and pushing unit, enabling smooth loading and unloading of boards with a full working area and effective collection of finished elements on a specially adapted table. Thanks to the use of a reinforced structure and solid components, the CORMAK CNC Router is able to cut several boards simultaneously in one cycle, ensuring continuous production even in the case of heavy loads. The attributes of this advanced machine include those ensuring precise and very fast processing of materials: pneumatic pins, strips and actuators ensuring automatic plate basing efficient milling unit intelligent quick selection of tools from the 12-piece "revolver" type magazine LCD control panel with industrial control software included Siemens, Schneider and Phoenix electronics feeder and receiver table - ADDITIONALLY PAID OPTION In addition, the center is equipped with an advanced nesting algorithm and tool path optimization, which allows for flexible production and efficient use of materials. The vacuum chip extraction system and the central lubrication system ensure not only cleanliness and safety of work, but also long-term reliability of the machine. Overall, the CORMAK NST2131-16D CNC milling machine machining center is an ideal solution for companies looking for efficient, reliable and versatile machines for processing materials, capable of meeting even the most demanding industrial productions. Technical parameters Field Working 2100x3100 mm Z axis 300 mm INOVANCE servo drives (1.3kw for XY, 850w for Z-axis), with planetary gear Spindle power 9 kW HQD air-cooled spindle (optional oil mist) Spindle speed from 6000 to 24000 rpm Power supply 400 V, 3PH, 50HZ Re-positioning accuracy 0.01 mm Linear bearings trapezoidal rails, Hiwin carriages Vacuum, hybrid material clamping Vacuum pump 2x7.5 kW (optional) SYNTEC 60WE software Dimensions 10300x3600x2430 mm Weight 2050 kg Pgsdpfjwn Dz Isx Af Ijg Equipment HQD spindle air cooled, Premium version Tool measurement sensor included Tools, sleeve set, leveling feet and other accessories

Condition: new, Year of construction: 2025, The CNC milling machine CORMAK NST2131129A LOADING/UNLOADING was created for companies that prioritize high processing power, economic efficiency and machine reliability. This automatic nesting center offers huge possibilities, especially in its most popular version, equipped with an innovative storage and pushing unit, enabling smooth loading and unloading of boards with a full working area and effective collection of finished elements on a specially adapted table. The CNC router CORMAK is able to cut several boards simultaneously in one cycle, ensuring continuous production even in the case of heavy loads. The attributes of this advanced machine include those ensuring precise and very fast processing of materials: Automatic loading and unloading system through specially designed suction cups and its transfer with automatic homing to the horizontal drilling zone Intelligent quick selection of tools from the "revolver" magazine of 12 pieces Efficient 2 drilling units and HQD and HSD spindles (industrial spindles on ceramic bearings Pneumatic homing pins, LCD control panel with control software included Large protective cover With extendable pins for locating the processed material - 6 pieces Electronics from Siemens, Schneider and Phoenix Feeder and unloader table Pgodsunw N Aspfx Af Iog Additionally, the center is equipped with an advanced nesting algorithm and tool path optimization, which enables flexible production and efficient use of materials. The vacuum chip extraction system and the central lubrication system ensure not only cleanliness and safety of work, but also long-term reliability machines. In general, the CORMAK NST2131129A CNC milling machine machining center is the ideal solution for companies looking for efficient, reliable and versatile machines for processing materials. Technical parameters Working area 2100x3100 mm Z axis 300 mm Construction: Arm - cast iron / table - welded steel 12-piece umbrella-type tool magazine, ISO30 standard Tool length measurement sensor XYZ axis automatic lubrication system INOVANCE servo drives (1.3kw for XY, 850w for Z-axis), with planetary gear Table - T-shaped / hybrid / feeding and receiving Two-layer, multi-hole, vacuum bakelite work table with rubbers and mounting screws, with positioning system 9 kW spindle power HQD air-cooled spindle (optional oil mist) Spindle speed from 6000 to 24000 rpm Power supply 400 V, 3PH, 50HZ Repositioning accuracy 0.01 mm Linear bearings trapezoidal rails, Hiwin trolleys Vacuum, hybrid material fixing Vacuum pump 2x7.5 kW (optional) SYNTEC 60WE software Dimensions 10300x3600x2430 mm Weight 2050 kg Optional equipment - paid: Vacuum pump: e.g. Becker KVT 5.5kW or 7.5kW Top-class safety barriers The latest UCanCAM V12 software Possibility to add oil mist

Condition: used, mileage: 28,870 km, power: 235 kW (319.51 HP), first registration: 03/2006, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, For vehicle inquiries, Mr. Seidel is happy to assist you (by phone). ---- Mercedes-Benz Actros 2032 A 4x4 Sweeper ---- * !!! 30 units available !!! * Large sweeper for airport runways * 1st owner - German Armed Forces * Very good condition---- * ADI all-wheel drive 4x4 with reduction gear * AL5 front axle 9.0 t * AM3 rear axle H7 13.0 t * A70 front axle differential lock * BB0 anti-lock braking system (ABS), switchable * BB1 Telligent brake system with ABS * BB6 drum brakes on FA and RA * B43 trailer brake, 2-line * B65 heated air dryer * CR5 reinforced frame head for special attachments * C42 stabilizer, rear axle, underframe * C63 steel bumper * D25 roof hatch/ventilation flap in roof * EC6 trailer socket, 15-pin * ES8 additional socket 24 V/15 A, cab railing * ET1 voltage converter 24 V/12 V, 8 A * EV2 preparation for CB radio * EV5 preparation for telephone, fax * EX8 preparation for toll detection material, Toll Collect * FE5 electric window lifters, driver and passenger doors * FE6 cab access, movable * FS2 wide-angle mirror, driver's side, heated * FZ7 immobilizer with transponder * F05 M-cab * F24 straight cab rear wall * F52 external sun visor, transparent * GS7 Telligent shift II * GV2 transfer case VG2400 - 3W, 2-speed * H03 air conditioning * IA1 4x4 wheel arrangement * ID1 leaf suspension * IF2 MPII series * IL1 domestic (Germany) * IR6 wheelbase 4500 mm * IV2 20-tonner * IX6 V-engines, 6 cylinder * I73 tubeless tires, 315/80 R 22.5 RA * I76 tires, 385/65 R 22.5 FA/VLA/NLA * JN0 tachograph, 1 day + 2 drivers, modular * K68 exhaust silencer(s) vertical, behind cab * K81 fuel pre-filter, heated water separator * L58 revolving warning light, yellow * MD9 cruise control * MS3 engine spec, Euro III * MV1 engine, V6, LA, 235 kW (320 hp), 1800 rpm * M32 additional air compressor * M49 tandem air filter system * N53 rear engine output for hydraulic pump * N55 transmission oil cooling * QD4 parabolic spring, 9 t - 10.5 t, for winter service * QE8 rear spring, 13.0 t * Q90 omission of trailer coupling * RA9 steep shoulder rims 11.75x22.5 FA * R04 wheel nut cover * R38 steep shoulder rims 9.00 x 22.5 * SF1 functional seat, velour, passenger * SH1 driver comfort suspension seat, Grammer * TN3 weight variant 21.5 t (10.0/13.0), winter service * Z38 airfield service vehicle * Tire tread: 1st axle 10-12mm, 2nd axle 7-13mm---- * Superstructure: Bucher STKF 9500 * Container 9.5 cbm * Water tank 1500 L * Side disk brushes left and right * Separate engine for superstructure 205 KW / 279 hp * Sweeping width suction nozzle 2,300 mm * Sweeping width disk brushes and suction nozzle 3,400 mm Pjdpfx Afewtaaws Iegg * Blower system 4x blower nozzles * Water pump with spray hose 10 bar * Front attachment plate with municipal hydraulics for snowplow or other front attachments On request, we can provide you with a leasing or financing offer. Mr. Seidel (Phone) will be happy to assist you. For more information, visit our homepage. !!! Errors, changes, and prior sale excepted !!!

Condition: used, mileage: 34,241 km, power: 235 kW (319.51 HP), first registration: 06/2006, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, all wheel drive, For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone).----Mercedes-Benz Actros 2032 A 4x4 Road Sweeper---- * !!! 30 units available !!! * Large sweeper for airport runways * 1st owner - German Army * very good condition---- * ADI All-wheel drive 4x4 with reduction * AL5 Front axle 9.0 t * AM3 Rear axle H7 13.0 t * A70 Differential lock front axle * BB0 Anti-lock braking system (ABS), can be deactivated * BB1 Telligent braking system with ABS * BB6 Drum brakes on front and rear axles * B43 Trailer brake, 2 lines * B65 Air dryer, heated * CR5 Reinforced frame head, for special installations * C42 Stabilizer, rear axle, under frame * C63 Steel bumper * D25 Roof hatch/ventilation flap in roof * EC6 Trailer socket, 15-pin * ES8 Additional socket 24 V/15 A, cab balustrade Pedjwtabhjpfx Af Isgg * ET1 Voltage converter 24 V/12 V, 8 A * EV2 Preparation for CB radio * EV5 Preparation for telephone, fax * EX8 Preparation for toll detection, Toll Collect material * FE5 Electric window lifters, driver and passenger door * FE6 Movable cab entry * FS2 Wide-angle mirror, driver's side, heated * FZ7 Immobiliser, with transponder * F05 M-cab * F24 Cab rear wall, straight * F52 External sun visor, transparent * GS7 Telligent transmission II * GV2 Transfer case VG2400 - 3W, 2-speed * H03 Air conditioning * IA1 Axle arrangement 4x4 * ID1 Leaf suspension * IF2 Model series MPII * IL1 Domestic (Germany) * IR6 Wheelbase 4500 mm * IV2 20-tonner * IX6 V-engines, 6 cylinders * I73 Tubeless tires, 315/80 R 22.5 rear axle * I76 Tires, 385/65 R 22.5 front/rear/front rear axle * JN0 Tachograph, 1 day + 2 drivers, modular * K68 Vertical exhaust(s) behind cab * K81 Fuel pre-filter, heated water separator * L58 Yellow revolving beacon * MD9 Cruise control * MS3 Engine version, Euro III * MV1 Engine, V6, LA, 235 kW (320 hp), 1800/min * M32 Additional air compressor * M49 Tandem air filter array * N53 PTO at rear of engine, for hydraulic pump * N55 Transmission oil cooling * QD4 Parabolic spring, 9 t - 10.5 t, for winter service * QE8 Rear spring, 13.0 t * Q90 Omission of trailer coupling * RA9 Steep shoulder rims 11.75x22.5 on front axle * R04 Wheel nut cover * R38 Steep shoulder rims 9.00x22.5 * SF1 Functional seat, velour, passenger side * SH1 Driver comfort suspension seat, Grammer * TN3 Weight variant 21.5 t (10.0/13.0), winter service * Z38 Airfield emergency vehicle * Tire tread: 1st axle 7-9mm 2nd axle 17-20mm---- * Superstructure: Bucher STKF 9500 * Container 9.5 cbm * Water tank 1500 L * Disc brushes left and right * Separate engine for superstructure 205 kW / 279 hp * Sweeping width suction mouth 2,300 mm * Sweeping width disc brushes and suction mouth 3,400 mm * Blower system with 4 blower nozzles * Water pump with spray hose 10 bar * Front attachment plate with municipal hydraulics for snowplow or other front attachments On request, we will prepare a leasing or financing offer for you. Mr. Seidel (tel.) will be happy to assist you. You can find more information on our homepage. !!! Subject to errors, changes and prior sale !!!

Condition: used, CITIZEN CINCOM M-16 is a CNC automatic lathe engineered for precision, high accuracy and reliable operation. It features a total of 13 axes, max. turning diameter 16 mm, turning length 200 mm and internal spindle diameter 20 mm; main and counter spindles up to 12,000 rpm, driven tools up to 8,000 rpm; C‑axis resolution 0.001°. Key specs: spindle motor 2.2 kW, total power required 8 kVA, machine weight approx. 2,900 kg, overall dimensions L2450×W1320×H1700 mm; revolver turret with 10 tools. Built for high-precision production, it achieves tight tolerances and suits automotive, watchmaking, machine tool, aerospace and medical applications. Pgedpfex Hfm Ajx Af Ieg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Pjdjw T Tcwopfx Af Isgg Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: used, mileage: 306,127 km, first registration: 10/2013, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 • Remote control • 4 hydraulic extensions • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers Pgjdpfx Afjwmn Tlo Ijg • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

Condition: used, mileage: 155,948 km, power: 110 kW (149.56 HP), first registration: 06/2000, fuel type: diesel, overall weight: 7,500 kg, color: yellow, gearing type: semi-automatic, emission class: euro3, number of seats: 2, total length: 5,620 mm, total width: 2,150 mm, total height: 3,080 mm, loading space length: 2,900 mm, loading space width: 2,060 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, For enquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone at ...). ---- Mercedes Benz Unimog U300 4x4 Dropside ---- * A52 Differential lock on front axle * B29 Pneumatic quick-release device in spring-loaded cylinder * B42 Dual-line trailer braking system * C50 VarioPilot (switchable right/left-hand drive) * C67 Enlarged fuel tank * C87 Vertical exhaust pipe * D11 Front mounting plate DIN76060 Type B, Size 3 * D50 Rear mounting brackets * D60 Central mounting brackets * E37 Permanent power socket 12V/15A, with C3 signal * E40 ABS trailer socket 24V, 7-pin / 5-pin * E42 Trailer socket 12V, 13-pin * E45 Front socket 24V, 7-pin * E47 Equipment socket 24V/40A with C3 signal at battery box * E53 Preparation for mobile/radio phone 12V * E62 Radio cassette player * F60 Cab tilting device * G21 Secondary gearbox with work and crawler gear group * H02 Single-circuit hydraulic system * H12 Hydraulic system with 2 circuits * H75 Front hydraulic couplers, 4-way, circuits 1 & 2 * H79 Separate return line at front * J08 24V socket in cab with C3 signal * J24 Tachograph with chart disk, 2 drivers * L45 Work lights at cab, rear * L47 Additional headlights for front attachments * L50 Yellow revolving beacon, left, with stand * M37 Alternator 28 V / 100 A (2800 Watts) * N05 Rear engine PTO with flange * N08 Engine PTO incl. front PTO * N09 PTO speed limiter * N16 Fast gearbox PTO, 4-bolt flange * Q29 Trailer coupling (MAUL360X200) by Ringfeder for ZAA 13T * Q36 Rear crossmember for increased trailer load (ZAA 13t) * R27 11x20 super steel wheels * S02 Air-sprung driver's suspension seat * S10 Air-sprung passenger's suspension seat * S26 Electrically heated laminated windscreen * S49 Sliding rear window (left) * S50 First-aid kit * S81 Widened mirror brackets * S82 Wide-angle mirrors * S83 Ramp mirror * X20 Increased payload rating * X70 Red/white reflective warning stripes * Z96 Delivery preparation fee * Additional lights: rear cab * Loading platform dimensions: L 2,900mm x W 2,060mm x H 400mm * Towing hitch: 40mm Rockinger * Coupling heads red/yellow * Permissible gross weight: 7,500 kg Pgsdpfx Ajw Sf Hxef Ieg * Unladen weight: 6,240 kg * Payload: 1,260 kg * Tyre tread depth: 1st axle 10–11mm, 2nd axle 15–16mm We are happy to provide a leasing or financing offer upon request. Mr. Seidel (Tel: ...) will be pleased to assist you. Further information can be found on our website. !!! Errors, changes, and prior sale excepted !!!

Year of construction: 2005, operating hours: 6,235 h, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 4100 mm Machine weight 11600 kg Control Unit Brand FANUC Model 18i-TB Main Drive Spindle speed range 5000 Spindle motor power 22 kW Number of axis 3 Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement 120 mm Y-Axis Rapid Traverse 7500 mm/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 24000 mm/min C-Axis Movement 360° Workpiece Workpiece weight 120 kg Turret Number of turrets 2 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Measuring Probe: Tool Measuring Probe Automatic Bar Loader: ILS-RBK10016 L 2265 mm, W 1116 mm, Approx. 490 kg Bar Loader Max. Material Length/Diameter: 1600 mm/5-65 mm Pjdsx D H Tcspfx Af Iogg Magazine Short Bar Feed with Servo Drive Main and Counter Spindle with Power Chuck D = 250 Enclosed Work Area Enclosure According to Accident Prevention Regulations Memory Card Input Socket, RS 232 Socket Tool Load Monitoring, Bed Flushing Workpiece Air Blow-off Function Automatic Tool Measuring Probe // Driven Tools on Both Revolvers This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, mileage: 35,272 km, power: 235 kW (319.51 HP), first registration: 11/2024, fuel type: diesel, empty load weight: 7,295 kg, maximum load weight: 10,705 kg, overall weight: 18,000 kg, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 4,185 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, total length: 7,070 mm, Year of construction: 2024, construction height: 3,090 mm, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, Euro Cargo ML180E32 4x2 GSR Hooklift Tipper 235 kW/320 HP – Available Immediately! - Hydraulic connection for tipper trailer - Rear air suspension - Wheelbase: 4185mm - Differential lock - Steel bumper - Rear underride guard - CAN bus interface open for body control - Trailer version - Headlight protective grilles - Sun visor - Window in cab rear wall - 24V 15-pin trailer socket - Air conditioning - Electrically adjustable/heated mirrors - 40mm D100kn tow jaw coupling - Right driver's seat armrest - Rear crossmember D100kn - 360ccm air compressor - 4-way adjustable comfort driver's seat - AHK brand coupling Rockinger - Tyres 295/80R22.5 M+S - Iveco radio DAB + CD Bluetooth - 200L plastic fuel tank - Cab colour: RAL 6005 green, white, or RAL of choice! - Maul coupling Rockinger, trailer load 20,000kg - Ball head coupling 3,500kg 24V12V converter optional, €2,000 plus VAT - Yellow revolving beacons optional Hooklift system 14t mounted on Iveco 18t chassis - Lifting and tipping capacity: 14,000kg - Dual speed (fast gear) - Hook height 1,570mm according to DIN 30722-1 - Compatible container lengths: 4.0m-5.5m - Telescopic arm - Optional with tele / articulated arm! Container lengths 3.5m-5.5m (low loading angle) - Mechanical hook safety device - Hydraulic internal locking system - Remote control by cable - Additional control on the device - Emergency stop function - Hydraulic pump & 100L hydraulic tank - Paint: black RAL 9011 graphite black, rollers RAL 9011 graphite black - Toolbox - CE certificate - Suitable hooklift containers available optionally Pgjdpfx Asx N Upfef Iog Errors and prior sale subject to change. ... Air conditioning, VAT deductible, ASR, ABS, sunroof, multifunction steering wheel, radio, onboard computer, cruise control, front + rear electric windows, electronic immobilizer, central locking with remote control, trailer coupling, power steering, rev counter, differential lock, external temperature display, tinted windows, tachograph, cab: short haul, air-sprung driver’s seat, electric windows, auxiliary headlights, tipping hydraulics, one owner, emissions class: Euro 6, diesel, rear-wheel drive, excellent condition, HSN 4192, particulate filter, general inspection (TÜV) and emissions test renewed before sale, fine dust sticker: 4 - green, tyre pressure monitoring.

Condition: used, mileage: 129,600 km, power: 375 kW (509.86 HP), first registration: 10/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2026, color: blue, gearing type: automatic, emission class: euro6, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 960 mm, Year of construction: 2020, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle no.: 93999A Dautel 2-way tipper L: 5600 W: 2420 H: 960 mm Hydraulic couplings for trailer hydraulics Duo-Matic quick coupling PENZ Recycling Crane 12 L 8.40 R Kintec Two-Shell Grab KG 25-2-80 Equipment Lines and Packages * V2J Arocs 5 * D0L Smoker Package Exterior * F6I Heated approach/forward-facing mirror * Q7W Trailer coupling: Central axle trailer Rockinger D50 * E6A Trailer socket 24V / 15-pin * L3C Work lights, cab rear wall, top * Two-piece exhaust system * K7D Exhaust outlet to right side * C7K Batteries arranged vertically * B1B Electronic braking system (EPB) with ABS+ASR * ClassicSpace * B4M Steel air tank * B4A Compressed air unit with condensate monitoring * B1H Medium compressed air unit * F6Q Air horn * Cab: mounting height 600 mm * F7Y Cab: movable cab entry * F3W Cab: hydraulic tilting device * F3B Cab: steel-sprung, comfort * Cab floor with engine tunnel 170 mm * Cab width 2.30 m * F6C Tinted windshield * E1N Alternator 100 A * K3V Urea tank (AdBlue): 60 ltr. * D8A Manual tilting sunroof (steel) * I6A Body/chassis: chassis * K5B Fuel tank: 390 ltr. steel, left * C6J Non-regulated steering assistance pump * CLW Hydraulic oil cooling * M6L 2-cylinder air compressor * M5V Enhanced engine brake * M5B Engine version OM 471 * L1I Fog lights with LED daytime running lights * N6Z Transmission oil cooler * R1Z R1T Shoulder rims 11.75 x 22.5, front axle * Wheelbase not defined * C1R Wheelbase variant 3600 mm * Q3Y Frame lowering without remnant pressure control * Ramp mirror * S-Cab Classic Space, 2.30 m, tunnel 170 mm * B2D Disc brakes with partial protection * B2A Disc brakes front and rear axle * Q8R Reinforced rear cross member * L4Z Headlight protection grille * L2H LED side marker lights, flashing * F5L External sun visor * C8I Front splash guard * C6Q Front axle stabilizer * R1T Steel rims 11.75x22.5 (on front axle) * F7B Front bumper corners in steel design * F7T Door extension for cab * C7A Rear underrun protection, fixed * C7F Front underrun protection * L9A Preparation for revolving beacons * M7T Regulated water pump * G5B Twin-disc clutch Interior * D7Z Storage net on rear wall * D0S Compressed air connection in cab * Electric window lifters * Y1W Cool box / fridge * B1F Heated air dryer * F4I Rear window * D3T Seat cover/upholstery: velour, passenger seat * D3Q Seat cover/upholstery: velour, driver’s seat * D1N Seats in cab: co-driver function seat * D2N Seats in cab: foldable driver’s seat backrest * D1C Seats in cab: comfort suspension seat driver * 12V socket in passenger footwell * E3R 24V / 25A socket in passenger footwell Multimedia * J2G Audio system: digital radio DAB / DAB+ * J2Y CB radio * J6C Interactive multimedia cockpit * J2U Navigation system * J1O Tachograph / EC control device Comfort & Environment * F8V Automatic headlight activation (light sensor) * M5C EURO 6 standard * I6X Suspension: leaf / air Podpfxoxvv A Rs Af Isgg * S5A Speed limiter system * S5Z Cruise control * G2F 12-speed gearbox - Type: G 330-12 * F8F Comfort locking system * Multifunction steering wheel * F8W Rain sensor * G5G Mercedes-Benz PowerShift transmission * F8B Remote control key (2) * F8H Additional remote control key (2) * D7G Storage compartments with cover behind driver and co-driver’s seat * F8E Central locking with remote control

Condition: used, Year of construction: 2012, total height: 2,400 mm, total length: 13,500 mm, total width: 2,450 mm, Empty weight: 2.500 kg Pjdpfjwnip Dox Af Ijgg Biesse Rover A1536 G FR Year 2012 Central lubrifaction FT work table, X 3765 Y 1560, 9 zones 12 kW electro spindle, ISO 30, air cooled Biesse WORKS Biesse NEST MODULE Air conditioner 16 pos. revolver magazine Work area XYZ 3765*1585*170 2x vacu pump 250 m³ C axis 360° BH 17 L drilling group Including loading and unloading system - Year: 2012 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 81399 - Transport dimensions: 13500mm x 2450mm x 2400mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and DOWELS INSERTING LINE Min/Max workpieces (panels) width (X axis) with FTT: mm 240 / 3100 Min/Max workpieces (panels) thickness (Z axis) with FTT: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with FTT: mm 140 /1550 (or 800+800) A) Loader (Bridge Frame) "RBO" Double Station, Mod. Advantage C B) Motorized Roller table "RBO" with turning device 90° (length to crosswise) C) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" FTT 800 Centre A: No. 2 Electro-spindles ISO 30 (Kw 3,7 each) with tool-holder magazine with 3 places each. Centre B: No. 2 predispositions for the installation of other 2 electro-spindles No. 2 tool-holder magazines (revolver) with 56 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Connection transfer, with upsidedown turning machine (180°) "RBO" Mod. Ribaltatore Pgedpfx Aogvdkgjf Iog E) Gantry (Portal) CNC (Routering and Drilling) machine "BIESSE" Mod. FTT 800 R8 No.2 horizontal units(1 left+1 right)with 4 BH18 heads with 18 spindles(36 right + 36 left),total 72 Centre A: No. 2 Electro-spindles ISO 30 (Kw 4,5 each) with 3 tool-holder magazine each. Centre B: No. 2 predispositions to install another 2 electro-spindles No. 2 tool-holder magazines (chain) with 60 positions each. No. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit No.2 horizontal units(1 right+1 left)with 5 insertion nozzles each (5 left + 5 right), tot. 10 nozzles G) Stacker (Bridge Frame) "RBO" Double Station, Mod. Advantage SC