Used Revolver for sale (288)

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → Robust machine housing made of cast iron → Automatic application and release of the test force → Automatic switching between objective lens and indenter → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC/HB) → Simple operation Technical Data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Testing method according to Vickers → Cross table 110 x 110 mm / travel range 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. specimen height 90 mm → Max. specimen depth 110 mm Kledpfx Anec Ipckoysu → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness testing device → Diamond indenter 136° → Cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONAL → VMS3 software (Video Measuring System) → Digital built-in measuring screw (for transmitting the edge distance to the VMS software) → Module "automatic measurement" (only in conjunction with VMS3 software) → PC system / monitor

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece Kljdpjc Ipc Uefx Anyou → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: as good as new (ex-display), WIKI 90 is the "Top-of-the-line" in Vickers and Knoop automatic Hardness Testing: - it is fully motorized - it is a fully automatic, so that the operator can do ther things - Load forces are applied directly to the measuring axis by load cells applied and electronically controlled in "closed loop" Test Load Range: 0,01 - 50kg Test Method: Vickers & Knoop Standard Delivery: - Hardness Tester - Indenter 136° Vickers - Software (Fully Automatic System) - Camera - motorized Revolver (6 Positions) - Objectives - automatic X/Y Stage - PC System - Monitor 24" - Dust Cover - User Manual Klodpfog Ifl Tex Anysu Please contact us, if you need a detailed Offer. Details you can see on our Homepage.

Condition: refurbished (used), functionality: fully functional, Testing method: Vickers Kedpfsdmz Uzsx Anyjlu Testing forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Scope of supply: - Hardness testing device - Diamond indenter 136° Vickers - LED lighting - Cross slide table 135 x 135 mm - Objective revolver - Objectives 20X / 40X / 60X Optional: - VMS3 (Video Measuring System) - Digital micrometer screw - PC system

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Klsdpfx Aey Ed E Uenysu Type: TNC 42/65 Year of construction: 2001 Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Kjdpoy Ed Ddsfx Anyjlu Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2000, 1 4-Bahnen-Flachbett (die 2 äusseren für Z-Schlitten; 2 innere für Reitstock) mit verfahrbarem Z-Schlitten auf äus seren 2 Führungen; Abstand 1160 mm auf inneren Führungen für Reitstock 700 mm Bettlänge mm 5300 Spitzenweite (Drehlänge zw. Futter-Höhe und Spitzen ) mm 3000 Spitzenhöhe mm 800 Drehdurchmesser über Bett mm 1600 Drehdurchmesser über Kreuzschlitten (zwischen Spitz en) mm 1400 Umlaufdurchmesser über Schlitten mm 1200 Bettbreite Führung Aussen mm 1160 Führungsbreite Reitstock MItte mm 700 Bett geschweisst; entspannt durch WIAP-Ersatzglüh- verfahren und vibrationsgedämpft nach dem pat. Verf ahren WIAP® VDSF® (Pat.Nr. 68433; Anm.4230130.30;PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Führungsauflagen geschliffen; Führungen austauschba r ohne Bettdemontage 1.2 Spindelstock / Hauptantrieb - festangeordnet Anzahl Spindelstöcke Stk. 1 Spindelmesskreis digital / linear Achsenlagenüberwachung keine; da Rundachse Spindelbohrung mm 112 Spindelnase A15 DIN 55021 Hauptspindelmotor: 100% ED kW 46 Nm 305 Motor 1PH7184 2NE Leistungsteil 6SN112-1AA00-0FA Hinter dem Spindelstock aufgebautes 3 Stufen Getrie be Automatisches über M Funktion programmierbares Getriebe Getriebstufe 1 RPM 5,6-120 Getriebstufe 2 RPM 16-360 Getriebstufe 3 RPM 45-800 Drehmoment Stufe 1: (100%) Nm 15236 Drehmoment Stufe 2: (100%) Nm 5290 Drehmoment Stufe 3: (100%) Nm 1904 Max Drehzahl RPM 800 1.3 Längs- und Querschlitten Stk. 1 Anzahl Querschlitten Stk. 1 Anzahl Längsschlitten digital / linear Achsmessystem am Motor Balluf Achsendlagenüberwachung (3er-Schaltpaket) RpM 2000 Achsantrieb Z-Vorschubmotor 27 Nm mm 1005 2 X Schlitten unabhängig verfahrbar Max Abstand in nen Ueber M Funktion ankoppelbar X Schlitten 1 4 Fach Rev. und X Schlitten 2 mit Angetr. Revolver kN 27 Vorschubkraft mm 6000 Max Vorschub / Eilgang Z mm 63 x 10 Vorschubart: spielfreie Kugelrollspindel mm 3020 Verfahrweg Z-Achse m / min 6* Eilgang Z-Achse (Auslegung 10 m / min) RpM 2000 Achsantrieb X-Vorschubmotor 1FT5076 18/22 Nm kN 15 Vorschubkraft mm 6000 Max Vorschub / Eilgang X mm 50 x 10 Vorschubart: spielfreie Kugelrollspindel mm 850 Verfahrweg X-Achse m / min 10 Eilgang X-Achse 1.3a Reitstock manuell verstellbar; luftunterstützt für leichtes V erschieben vibrationsgedämpft mit Konus für Reitstockspitze Pinolen-Durchmesser mm 200 Pinolen-Hub mm 200 Hilfsschleppeinrichtung mit dem Z-Schlitten vorhand en Klemmung mit Mutter & Hebel / Ringmutter mit div. Gewinden im Umkreis; versetzbar 1.4 Führungen Alle Führungen sind auf geschliffenen Flächen und Ksdod D Nxkjpfx Anyslu reibgeklebt Abmessungen mm 90 x 50 Härte der Stahlführungen ca. HRc 55 - 60 Gegenführungen kunststoffbeschichtet Automatische Zentralschmierung mit elektr. Kontroll e Die schweren Einheiten werden für den Leichtlauf un d gegen Verschmutzung luftunterstützt mit dem WIAP® Press-Air-Verfahren 1.5 Werkzeugrevolver mit angetriebenen Werkzeugen Werkzeugrevolver Baruffaldi TOER 320 Typ K18.0320.12041.B Anzahl Pos Pos 8 Zylinderschaft-Durchmesser VDI 60 Revolver Scheibe Durchmesser aussen mm 570 Revolver Scheibe Durchmesser VDI 60 mm 476 Scheiben Dicke mm 95 Angetriebene Werkzeuge Stk. 4

Condition: good (used), Year of construction: 2008, Steuerung: Fagor CNC8055 Klsdpfjim H Unox Anyeu Aufnahme: VDI30 Späneförderer Werkzeugwechsler: Sauter Revolver 8Fach Z-Achse: 810mm X-Achse: 280mm Spitzenweite: 1000mm Drehfutter: Röhm Duro, Durchmesser 200mm Drehdurchmesser über Schlitten: 230mm Drehdurchmesser über Bett: 460mm Spindeldurchlaß: 56mm Spindeldrehzahl: max. 3100 U/min. Werkstückgewicht max.: 570kg Antriebsleistung: 18kw Maschinen Abmessung: Länge 3660mm – Breite 1870mm Gewicht Maschine: 2900kg

Condition: as good as new (ex-display), Year of construction: 2025, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Kledpfxouydgj Anyou Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,200 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,100 kg, product length (max.): 3,900 mm, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Okuma LB3000EX MYW was manufactured in 2008. It features a maximum turning diameter of 360 mm and a Z-axis travel of 1000 mm. The machine is equipped with a twin spindle configuration and a control system OSP-P200. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000EX MYW horizontal turning machine we have for sale. Contact us for further details. • Control system OKUMA OSP P200L • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 stations • Number of revolvers 2 • Tool holder BMT 60 • Number of tools 24 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Y-axis travel mm • X-axis travel 200 mm • Z-axis travel 1000 mm • Hydraulic clamping Y-axis • Sub-spindle with W-axis • Spindle configuration twin spindle • Main spindle bore 110 mm • Spindle bore approx. 80 mm • Spindle nose A2-11 Klsdpfxsy Ddtve Anysu • Spindle speed range 28–2800 rpm • Spindle speed 4200 rpm • Main spindle drive VAC 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 360 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mmMachine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight approx. 6100 kg • Maintenance contract yes • Utilization 60% Additional equipment • Bar feeder • OPTIONAL for an additional charge: Approx. 200 tools available, collets, power tools Technical Specification Counter Spindle No Driven Tools Yes

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, total width: 2,250 mm, total height: 4,000 mm, loading space length: 9,250 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, MAN TGS 35.520 8x2-6 BL CH Basic Data - The new MAN Truck Generation - MAN code: FPLOEBL5 - Euro 6e - Vehicle type: flatbed truck/chassis - Cab: TM (narrow, long, medium height) - Wheelbase: 4,105 mm - Rear overhang: 1,250 mm Weights (Permissible / Technical) - Gross weight: 32,000 kg / 34,500 kg - Front axle: 7,100 kg / 7,500 kg - Second front axle: 7,100 kg / 7,500 kg - Rear axle: 11,500 kg / 12,000 kg - Trailing axle: 7,100 kg / 7,500 kg Engine & Drive - Diesel engine: MAN D2676 LFBF, 382 kW / 520 hp, 2,650 Nm - MAN TipMatic 12.28 OD - 430 mm single-disc clutch - High-performance engine brake MAN EVBec - MAN EfficientRoll - MAN Idle Speed Driving Axles & Suspension - Front axle: 9,200 kg, offset, steered - 2nd front axle: 9,200 kg, offset, steered - Rear axle: HY-1350, 13,000 kg - Trailing axle: 9,000 kg, steered, liftable - Axle ratio: i = 3.08 - Air suspension - Digital axle load display - Shock absorbers and stabilizers on all axles Tires - FA/2nd FA/Trailing axle: Continental 315/60R22.5 EcoPlus HS3 - Rear axle: Continental 315/60R22.5 Conti Hybrid HD3 - Rims: Alcoa Dura-Bright EVO, 9.00x22.5 - Tire pressure monitoring system TPM Chassis - Longitudinal member thickness: 8 mm - Underrun protection: front, side, rear - Fuel tank: 300 l right, steel - AdBlue tank: 35 l right Electrics - 2x batteries 12 V / 210 Ah AGM - Alternator: 28 V / 120 A / 3,360 W - 24 V battery management system Brakes - Electronic braking system (EBS) - ABS - Full braking assistant - Disc brakes on all axles - Electronic parking brake - Anti-roll back function MAN EasyStart Cab - Comfort cab suspension - Electric glass sunroof - Central locking with remote - 4 vehicle keys - LED package Plus - High beam assistant - Automatic driving light control - 2 LED amber revolving beacons - Reverse warning system - Climatronic air conditioning - 4 kW supplementary water heater - Lower bunk with slatted frame - Leather multifunction steering wheel - Professional instrument cluster 12.3" - Digital tachograph with remote download - MAN Mediasystem Professional Navigation 12.3" - Advanced sound system with subwoofer Seats - Driver’s seat package Premium, air-suspended, heated - Passenger seat: unsuspended, adjustable Assistance Systems - ESP - ASR - Cruise control ACC Stop & Go - Emergency braking assistant EBA - Lane departure warning LDW - Lane change assist LCS and turn assist - Attention warning MAN AttentionGuard - Front detection - Traffic sign recognition - Reversing motion system Interfaces - 2-line trailer brake coupling - 15-pin trailer socket - ABS socket Kodpfoy Rvynox Anyslu - Body power supply interface - FMS interface - PTO gearbox-dependent type NH4c Paintwork - Cab finish: RAL 5002 ultramarine blue - Door extension and doorstep finish - Fender finish - Bumper finish ----- WIESE Body for Aerial Platform and Construction Machinery Transport Body dimensions - Length: approx. 9,050 mm, usable length up to the toolbox in front of the bulkhead approx. 8,770 mm - Width: approx. 2,550 mm - Loading height: approx. 1,050 mm unladen Substructure - Steel welded construction, weight-optimized - Longitudinal and crossmembers from laser-cut special profiles - Short crossmember spacing for high point loads - Rear inclined for low ramp angle - 90° outer frame profile with lashing points for tie-down straps Bulkhead & Floor - Reinforced bulkhead, 200 mm below cab

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,200 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 920 mm, spindle motor power: 40,000 W, total height: 2,600 mm, total width: 2,600 mm, overall weight: 13,500 kg, product length (max.): 5,200 mm, number of slots in tool magazine: 22, number of axes: 4, This 4-axis Okuma LU35-M was manufactured in 2008. It features a maximum turning diameter of 550 mm and a Z-axis travel of 920 mm. The machine is equipped with two revolvers, offering a total of 22 tool stations, and operates at a spindle speed of 3200 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LU35-M horizontal turning machine we have for sale. Contact us for further details. • Maintenance Contract: Yes • Utilization: 85% • Shifts: 2 • Number of Tools: 12 • Number of Revolvers/Magazines: 2 • Maximum Turning Diameter: 550 mm • Control System: OSP-P200L • Revolver A: 12 stations • Revolver B: 10 stations • Spindle Bore: 90 mm • Supply Voltage: 400 V Ksdpsy A Ibhofx Anyslu • Phase: 3 • Frequency: 50 Hz • Rated Capacity: 53.1 kVA • Full Load Current: 76.7 A • Largest Motor Rating: 134 A • Interrupt Capacity: 10 kA • X-axis travel (A turret): 350 mm (corresponds to max Ø700 mm) • X-axis travel (B turret): 240 mm (corresponds to max Ø480 mm)OPTIONAL for an additional charge: around 100 x tools, Clamping elements, chuck jaw sets, 2-jaw chucks, zero-point clamping systemElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50

Condition: ready for operation (used), Year of construction: 2011, operating hours: 35,044 h, spindle speed (max.): 10,000 rpm, total height: 3,000 mm, total width: 2,500 mm, overall weight: 11,000 kg, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 16,800 W, product length (max.): 2,500 mm, table load: 500 kg, tool weight: 8,000 g, number of slots in tool magazine: 82, number of axes: 5, This 5-axis HERMLE C40U Dynamic universal machining centre was manufactured in 2011. It features a travel of 850 mm in the X-axis, 700 mm in the Y-axis, and 500 mm in the Z-axis. The machine has a maximum spindle speed of 10,000 rpm and a magazine capacity of 38 positions plus 43 additional. If you are looking to get high-quality machining capabilities, consider the HERMLE C40U Dynamic machine we have for sale. Contact us for further details. • Utilization: 70% • Shifts: 2 • Operating hours: 35,044.4 h • Rotary table diameter: 420 mm Kodpey Al Ufofx Anyelu • Clamping surface diameter: 420 mm • Spindle: • Power at 40%: 1500 rpm = 25 / 16.8 kW; 10,000 rpm = 7 kW • Torque at 40%: 1500 rpm = 159 / 107 Nm; 10,000 rpm = 6.7 Nm • Tooling/magazine: • Number of revolvers/magazines: 2 • Magazine capacity: 38 positions • Additional magazine + 43 positions • Maximum tool length: 300 mm • Maximum tool diameter: 140 mm • Knoll Cooling • Renishaw OMP 40 probe • IKZ (inner cooling through spindle) • Laser beam monitoring • Chip conveyor • SK 40 • Operating voltage 400 V/3~ • Mains frequency 50 Hz • Control voltage 24 V- • Total nominal current 60 A • Total performance 41 kVA Additional equipment • OPTIONAL for an additional charge: Tooling package available: approx. 530 tools • OPTIONAL for an additional charge: Zero-Point Clamping SystemMachine was maintained in 2025 by HERMLE officialIn August 2025, the spindle head was replaced and the geometry was checked and adjusted again by HERMLE official Technical Specification Taper Size SK 40

Condition: refurbished (used), Year of construction: 2019, operating hours: 8,440 h, load capacity: 1,600 kg, lifting height: 5,000 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, battery voltage: 48 V, fork length: 1,200 mm, empty load weight: 2,471 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – PROFESSIONALLY REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically overhauled according to FEM-4.004 guidelines and current safety standards – ensuring maximum quality and safety. Every vehicle is thoroughly inspected and reconditioned, from the chassis to the battery, including drive system, brakes, steering, and electrics. ? Made in Germany – with responsibility and precision ? Strict technical inspection ? 400+ units available ? Worldwide shipping & customs clearance ? Service & spare parts at fair prices ? Personal support – even after purchase Test and get advice on-site – we'll find the right solution for you. Industrial Truck Specifications: Manufacturer: Jungheinrich Type: Counterbalance Forklift EFG 216k Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2019 Operating hours: 8,440 Lift height: 5,000 mm Mast type: Triplex Free lift: Yes Overall height: 2,235 mm Fork length: 1,200 mm Unladen weight: 2,471 kg Load center distance: 500 mm Tyres: Solid rubber Model designation: EFG 216k Battery type: Lithium-ion Kjdpfx Ansy Rq Dhsyslu Voltage: 48 V Battery weight: 924 kg Cab type: Front & roof window Cab equipment: SoloPilot control lever Lighting: Work lights 2x front Lighting: Revolving warning beacon Attachment: Sideshifter

Condition: new, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,240 mm, fork length: 1,200 mm, empty load weight: 5,390 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – EXPERTLY REFURBISHED FOR PROFESSIONALS Our forklifts are technically overhauled in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From the chassis to the battery, drivetrain, brakes, steering, and electrics – every vehicle is thoroughly inspected and reconditioned. Ksdpfxsy Rn Sce Anyslu ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs handling ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on site and get expert advice – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Heli Model: Counterbalance Forklift CPCD35 Drive type: Diesel Rated capacity: 3,500 kg Year of manufacture: 2025 Operating hours: 0 Lift height: 4,700 mm Mast type: Triplex Free lift: Yes Overall height: 2,240 mm Fork length: 1,200 mm Unladen weight: 5,390 kg Tyres: Solid rubber Model designation: CPCD35 Cab type: Overhead guard with roof window Lighting: 2x front work lights Lighting: 1x rear work light Lighting: Revolving beacon Lighting: Road lighting package for limited public road use: indicator, tail light, reversing light, reflector, etc. Attachment: Sideshift

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 565 mm, spindle motor power: 22,000 W, total height: 2,300 mm, total width: 2,100 mm, overall weight: 6,000 kg, product length (max.): 3,900 mm, number of axes: 3, This 3-axis Okuma LB3000 EX was manufactured in 2008. It features a maximum turning diameter of 340 mm and a distance between centers of 1020 mm. The machine is equipped with a powerful OSP-P200 control system and offers a spindle speed range of 45–5000 rpm. If you are looking to get high-quality turning capabilities, consider the Okuma LB3000 EX horizontal turning machine we have for sale. Contact us for further details. • Control system OSP-P200 • 12-station tool turret radial • Revolver 12 driven tools • Number of revolvers 1 • Tool holder BMT 60 • Number of tools 12 • Number of tools available approx. 200 • Driven tool stations power 7.1 kW • Driven tool torque 40.4 Nm • Driven tool speed range 45–6000 rpm • C-axis included • Sub-spindle with W-axis • Main spindle bore 110 mm • Spindle bore 80 mm • Spindle nose A2-11 • Spindle speed range 28–2800 rpm • Spindle speed 45–5000 rpm • Main spindle drive 22/15 kW • Power at 40% duty cycle 22 kW • Maximum turning diameter 340 mm • Distance between centers 1020 mm • Programmable chuck pressure (2 levels) • Thread milling interpolation X/Y and Z/Y axes • Workpiece catcher programmable • Chip conveyor with integrated coolant tank • Paper band filter system heavy-duty • Coolant tank capacity 480 l • Coolant pump 40 l/min at approx. 20 bar • Coolant pump type Brinkmann TH 90/690-FSI • Extraction connection diameter 200 mm • Hollow clamping cylinder bore 110 mm • Power chuck FORKARD QLC-KS 250-101 Z8 • Chuck bore 101 mm • Drawtube for spindle max. 100 mm • Collet chuck Hainbuch Axfix 100 • Clamping range 42–100 mm • Manual collet change device • Sub-spindle stroke 150 mm • Bar feeder interface • Short bar loader IRCO ILS RBK • Bar capacity diameter 5–100 mm • Spindle reduction tube diameter 90 mm length 1500 mm Kodpfxey Aaxro Anyolu • Chip disposal conveyor PVC with PU coating • Hydraulic clamping cylinder bore 52 mm • Machine dimensions 3.9 m x 2.1 m x 2.3 m • Machine weight 4000–6000 kg • Maintenance contract yes • Utilization highOPTIONAL for an additional charge: Approx. 200 tools availableElectrical maintenance was carried out 1.5 years ago. During this work, some electrical components were replaced or cleaned Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Working range X: 3200 mm Working range Y: 1330 mm Working range Z: 170 mm 5-axis electrospindle, power 11 kW Drilling heads for vertical drilling: 16 Drilling heads for horizontal drilling X: 4 Drilling heads for horizontal drilling Y: 4 2 blades for grooving in X and Y directions Lateral linear tool magazine with 10 positions Revolver tool magazine with 16 positions Work table with 6 stops Automatic lubrication system Air conditioning system for the electrical cabinet Vacuum pump with a capacity of 250 m3/h Control: BHC 660 Kjdpfx Aney S Av Eoyolu Control panel Safety mats Protective netting Available from mid-July.

Condition: good (used), Telescopic filling machine Make: Zacmi Type: automatic 60 pocket rotating telescopic filling machine Capacity: up to 36.000 cans/hour Frame: stainless steel Ksdpsib A Idsfx Anyelu Direction: left-right Dimensions: L x W x H = 2.600 x 2.600 x 2.000 mm Weight: 1.500 Kg Power-Supply: 380 Volt + 50 Hz – 3 kW Compressed air: 6 Bar Features: in- and out-feed slat-band conveyor diversion plates revolving brush for removing product from top telescopes product height level control with proximity sensors height adaption with electric gear motor with dust roof Tooling: 67mm set Remark: without electric cabinet / control as-is or adjusted to customer needs

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels - Mandrel retraction unit Kljdpjn Smq Iefx Anysu - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Kjdpoq Nipyefx Anyelu Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Kledpfx Ansxmvzuoyeu Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 25,585 h, spindle speed (max.): 7,000 rpm, controller manufacturer: FANUC, controller model: Series 31i-MODEL B, This SPINNER TTS 42 Lathe was manufactured in the year 2020 in Germany and has 25585 production hours. It is equipped with a Fanuc Series 31i-MODEL B control unit. The machine has a spindle speed of 7000 rpm. See tech specs file as PDF (German) attached for more details. Machine Benefits • main spindle was replaced 2023 • maintained internally • runs on emulsion • no fire extinguishing Qualitative Machine Benefits • Unimag interface for bar loading magazines • Parts conveyor belt • Spinner bar loading machine type servo. Make spinner, for spindles up to 42mm passage, for material d=4-42mm, length up to 3,200 mm • 10x external turning holder • 12x boring bar holders d=32 • 3x recessed boring bar holders • 6x straight agw • 3x axial agw • Material processed so far: aluminum, brass Technical Machine Benefits • Spindle 2 (counter spindle) in version up to 7,000 rpm - 42mm • Revolver 1 : 12-fold with cnc servo drive revolver 2 : 12-speed with cnc servo drive revolver 3 : 12-speed with cnc servo drive dmjgmx • Ejector unit integrated in counter spindle for ejecting parts into the parts catcher • Signal lamp on top of machine in three colors red/yellow/green as status display • Late conveyor as hinged belt conveyor exiting to the right, incl. Integrated coolant tank and return pump • Coolant system as additional tank incl. Submersible pump 80l/4bar, high-pressure pump up to 80bar / 19. 5l/min • Flushing gun in the work area • Holder for messtaster on the machine bed as preparation for the use of a • Messtaster for tool measurement switching in 3 axes. • Extraction d=200 to the working area for connection to extraction system Klodpsyail Ujfx Anysu

Year of construction: 2025, condition: new, functionality: fully functional, NFM L200IV 200L universal mixer Model L200IV Cutter / Mixer / Homogenizer is following the footsteps of our experience in the industrial food processing equipment for producers of consumer products worldwide. Integrating our patents and knowledge; we created a machine with industrial capacity and durability with the ease of use of a counter-top appliance. The L200IV allows our customers to increase process capacity without increasing labour needs. Only one person is enough to operate this machine regardless of body-power. The tilting of the bowl and opening-closing of the cover is fully motorized and works automatically. The machine is operated via a hybrid control panel, offering water-proof metal buttons and a control screen. The timer, the variable speed function, the optional reverse revolving function, the cover and tilting mechanism controls are all integrated into this panel. There is a custom designed stair to reach the feeding level of the bowl and control the operation. The optional motorized scraper works automatically. The scraper shortens operation times, and increases productivity. Operator safety is at maximum. The Cutter machine does not start if it does not detect the bowl or the cover in place. There are multiple systems, to ensure safety and avoid mechanical problems. Besides these, there are multiple systems to avoid overloading of the motor units of the machine. All these systems ensure protection against abusive use and overload, protecting your investment for years to come. The high-level discharge height is designed for standard Euro-bin (200 Liters) containers. Please ask your sales consultant for an optional custom made tilter for loading the machine, instead of manual loading using the custom designed stairs. Vacuum option for the process bowl is available. Vacuum pump is completely integrated inside the machine construction, concealed and hygienic. The control of the vacuum function is fully integrated in the machine’s automation systems for full control of recipes and automatic operation of the machine. Power 22Kw, 600-3000RPM, removable bowl, dishwasher safe, ideal for cutting, mixing homogenizing, grinding, chopping, emulsifying, products such as hummus, sauces, soups, pastes, pates, purees, and more, 3Ph Kledpfxevw Ug Uj Anysu

Condition: used, Technical details: turning diameter: 626 mm turning length: 3000 mm Turning diameter: 600 mm spindle bore: 100 mm spindle turning speed range: 2800 U/min weight of the machine ca.: 18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control - NC steady rest - 12-fold revolving head Kedpfx Anevgmimjyolu - splash doors - tailstock - coolant device *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min Kjdpfxjvgb Epj Anyslu diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *