Used Roeder for sale (129)

Condition: used, Year of construction: 2007, sheet width 3020 mm plate thickness 2.0 mm bending angle max. 135 ° stroke of upper beam 250 mm Adjustment folding beam 25.0 mm work height max. 935 mm control SCHRÖDER NC total power requirement 6.0 kW weight of the machine ca. 3350 kg. dimensions of the machine ca. 4250 x 2300 x 1900 mm Nwjdpfsxacfyex Agzer - in checked conditions - machinevideo - ?v=kyDHkc9opN4 Features: - Dynamic, powerful motorized folding machine - Used SCHRÖDER NC control unit with LCD display * Manual, setup, and automatic operation * Fast programming of individual parts * Pivoting control panel, right front - NC electro-motorized backgauge with rear sheet support surface - Manual lower beam adjustment - 1x freely movable double foot switch - 1x bending tool set - 2x emergency stop buttons at the front - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data Nsdevri Nmspfx Agzowr - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately. Nsdpfxev Tzphe Agzjwr

Condition: not inspected (used), Schröder double-jacketed pressure tumbler, steam tumbler, heat tumbler, 2500 liters Nwjdpfx Aswg H D Negzer Preheating or thawing of meat possible For heating, the tumbler must be connected to a steam generator Water vacuum pump Machine is offered as shown in the photo. All cables are labeled, which simplifies electrical connection. The machine was in operation until the last day and had to be dismantled due to its width. It was disassembled by the sausage manufacturer's in-house technician, and all electrical cables were numbered. The machine was dismantled in working condition. We have not reassembled or tested the machine.

Condition: excellent (used), Year of construction: 1986, Window patch machine Heiber & Schroeder Year 1986 Model WP1 Nsdpfx Aswb Dqpegzjwr

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 402594, type of input current: three-phase, input voltage: 400 V, working width: 2,500 mm, power: 30 kW (40.79 HP), Equipment: CE marking, Precision Double-End Profiler, year of manufacture 2002, completely overhauled, including current CE conformity and 1-year warranty, upgraded to linear guideways and double ball screw, extended to a maximum cutting length of 2.5 m. The ideal machine for the precise cross-cutting and profiling of parquet strips and boards on end faces, also suitable for top-layer lamellas. A heavy-duty and well-proven design in precision execution, featuring guided transport chains, with 2 saw spindles and 1 milling cutter per side. Equipped with motorized length adjustment and position control via PLC touch panel, automatically adjustable to the desired length. All 6 tools are mounted on high-precision tool spindles with quiet-running belt drive and AC motor. Left-hand version. Includes 1 set of new carbide-tipped tools, milling cutters on hydro sleeves. Feed rate: 30 – 150 pieces/min Wood width: 40 – 230 mm Wood length: 250 – 2,500 mm Wood thickness: 10 – 30 mm (optionally up to 50 mm) Njdpfx Agsxlnpzjzswr

Condition: used, Year of construction: 1997, sheet width 3230 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes 28 - 42 Hub/min cutting angle 1.60 Grad table height 820 mm distance between columns 3540 mm Control ELGO 87P engine output 6.8 kW weight of the machine ca. 3410 kg. range L-W-H 4070 x 2070 x 1400 mm from a maintenance workshop including special accessories (!!) Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - NC electro-motorized back stop - including NC ELGO "TYP 87P" digital control unit * adjustable from the front right * with target/actual value position input * continuous adjustment over the entire travel range * rough adjustment via push buttons * protection of the limit values ??with limit switch - "Duo-Cut" drive with two dynamic, powerful gear motors - support table with recessed grips - hold-down bar with hard rubber strip - all-steel knife with two cutting edges - selector switch for single and continuous stroke - 1x freely movable foot switch - safety device at the rear - original operating instructions Special accessories included: - pneumatic sheet holding device for thin sheet metal cuts - 1x extra long side stop, including support foot + digital stop - 2x extra long, front support arms * with "SLIDING" mount - for easy moving Nwsdpfxjxacd No Agzor

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 2035, input voltage: 380 V, power: 4 kW (5.44 HP), Transfer punching machine SCHOREDER & BAUER HB 20 Nedpfew Tcgljx Agzjwr Power 20T per workstation (2x20 T) Number of strokes from 20-100 rpm Year: 1989 Serial number: 2035 Kw 4 Weight approx. 3500 kg Complete documentation comes with the machine. The machine is in working condition. The costs of organizing a crane or forklift for loading the machine are charged separately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Nwsdpfx Aexn Dhlsgzsr Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: ready for operation (used), Year of construction: 2003, operating hours: 19,090 h, functionality: fully functional, machine/vehicle number: 10221-005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 320 mm, table length: 320 mm, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! Machine can be dismantled and loaded for €3,000. TECHNICAL DETAILS Nwsdswyclvepfx Agzjr X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Spindle Max. speed: 42,000 rpm Tool changer Tools in ATC: 48 + probe Pallets Number of pallets: 6 ITS 50 pallets: 54 Pallet size: 320 x 320 mm MACHINE DETAILS Total operating hours: 54,027 h Milling hours: 19,090 h Setup time: 2,353 h

Condition: used, Pressure switch, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch -Manufacturer: Kromschröder, gas pressure switch orig -Type: DG500U-6T2 84447564 -Control range: 100-500 mbar -Pmax.: 600 mbar -Dimensions cardboard: 120/100/H85 mm Nsdpfjiiigtsx Agzjwr -Weight: 0.4 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 201329, type of input current: three-phase, input voltage: 400 V, working width: 120 mm, power: 35 kW (47.59 HP), Equipment: CE marking, Completely overhauled and modernized, including CE conformity and 1-year warranty. Built with an extra heavy cast-iron frame, designed for four-sided processing of solid parquet strips and boards. The transport of parquet strips is handled by a heavy-duty conveyor chain, ensuring precise straight guidance during machining. The precisely opposed milling heads guarantee a high degree of accuracy and parallelism of the sides. Large CE safety cover (CE 2011). Both planer spindles are set at a 30° angle. Completely new electrical system (new control cabinet including new controls, etc.). Planer spindles 2 x 7.5 kW, milling spindles 2 x 5.5 kW, feed 5.5 kW. Optional: planer spindles 2 x 11 kW. Technically and visually like new! Includes one set of new carbide tools with hydro sleeves. Wood width: 40 to 120 mm Wood length: 200 to 800 or 1,250 mm Wood thickness: 10 to 35 (50) mm Njdpfxexlnh De Agzowr Feed rate: 10 to 50 m/min.

Condition: used, Year of construction: 2003, sheet width 1020 mm plate thickness 4.0 mm distance between columns 1100 mm stroke of upper beam 250 mm Lower beam adjustment 50.0 back stop - adjustable max. 750 mm control POS 400 total power requirement 4.4 kW weight 1960 kg range L-W-H 2065 x 1500 x 1425 mm Equipment: - Robust electric-driven folding machine - With dynamic, powerful drive motors - SCHRÖDER NC control unit "POS 400" * Bending angle preselection * Control panel, right front - Manual backgauge, adjustable from the rear * Adjustment range up to max. 750 mm - Manual lower beam adjustment - 1x freely movable double foot switch Nwjdpfxjxab Slo Agzer - 1x set of bending tools - Emergency stop button at the front - Original operating instructions

Condition: used, Year of construction: 1999, sheet width 3000 mm plate thickness 3 mm 3 support arms 1 angle stop pneumatic hold-down device Nedpfxsr Ngtis Agzswr Backgauge to be operated by hand

Condition: used, Line regulating valve, shut-off valve, pressure relief valve, shut-off valve, safety shut-off valve, safety relief valve, pressure monitor, pressure switch, pressure regulator, gas pressure regulator, gas pressure regulator, flow meter, flow meter, gas meter, quantometer -Manufacturer: Kromschroeder, flow meter -Type: DM 65Z50-40 -Qmax: 100 m³/h -Pmax: 4 bar -Dimension box: 300/220/H155 mm Nodpfx Asg St Nfsgzswr -Weight: 2,7 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded Nodpfjxabc Rsx Agzowr construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer -Manufacturer: Kromschroder, ignition transformer -Type: E 4718/54 -Number: 1x ignition transformer available Nedpfxjgh Dxpj Agzowr -Price: per piece -Dimensions: 65/85/H35 mm -Weight: 0.3 kg/piece

Condition: used, Year of construction: 1996, sheet width 2040 mm plate thickness 4.0 mm ST plate thickness 6.0 mm ALU thickness at "Niro-steel" 2.5 mm distance between columns 2100 mm no. of strokes ca. 32 Hub/min cutting angle 2.0 ° table height ca. 820 mm Control SCHRÖDER / ELGO total power requirement 5.5 kW weight 3250 kg range L-W-H 2400 x 1400 x 1100 mm From a maintenance workshop Current new price approx. 35.000 euros Special price upon request Nwodpfxexaa Ede Agzsr The MSS motorized guillotine shear was developed for sheet metal and plastic processing. With these shears, you can effortlessly produce clean cuts in series. The MSS "oscillating cut" is the elegant and powerful way to cut. Thanks to the oscillating cut technology, the applied force is optimally converted into a cutting movement, giving the machine power reserves. Features: - Robust, motorized swing-cut guillotine shears - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - NC electro-motorized backgauge * with SCHRÖDER / ELGO NC control unit - Manual cutting gap adjustment * Centralized - adjustable with a simple handle - 1x hold-down bar - 1x sturdy 1.000 mm side stop - including T-slot and mm scale - 2x front support arms 1.000 mm - Grip recesses in the support table - 1x freely movable foot switch - Rear sheet chute - Operating instructions

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch, gas pressure switch, gas pressure switch Nsdpfxsiiigwj Agzswr -Manufacturer: Kromschröder, gas pressure switch orig -Type: DG50UG-6K2 84447379 -Control range: 2.5 - 50 mbar -Pmax.: 500 mbar -Dimensions cardboard: 120/100/H85 mm -Weight: 0.4 kg

Condition: used, Year of construction: 1991, sheet width 2050 mm plate thickness 3.5 mm distance between columns 2100 mm stroke of upper beam 250 mm adjustment UW 80.0 mm work height max. 920 mm total power requirement 6.0 kW weight 2910 kg range L-W-H 3185 x 875 x 1450 mm Features: - Robust electric-driven folding machine - With dynamic, powerful drive motors - Manual/automatic operation selectable - Control panel, right front - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tool rail Njdpjw U U Ukofx Agzjwr - 2x used lower tool rails - 1x freely movable double foot switch - Original operating instructions

Condition: used, Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, gas solenoid valve -Manufacturer: Kromschroder, gas solenoid valve Njdpfx Aogh Dwvsgzjwr -Type: MK 5 R3 B2891 -Pmax.: 130 mbar -Voltage: 220/240 V -Dimensions: 375/115/130 mm -Weight: 7 kg

Condition: used, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg Nwjdpfjghtpbex Agzor

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch unused OVP Nwsdpfjgh Dw Sjx Agzer -Type: DG10U-6T -Control range: 1-10 mbar -Pmax.: 600 mbar -Dimensions box: 75/75/70 mm -Weight: 0.4 kg

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar Njdpegh Dxaefx Agzswr -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch -Manufacturer: Kromschroder, gas pressure switch -Type: DG6UG-3 -Control range: 0.4-6 mbar -Pmax.: 600 mbar -Dimensions: 75/75/70 mm -Weight: 0.3 kg Nwjdpegh Dxdsfx Agzjr