Used Rollforming Lines for sale (7,811)

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 Nwjdpsiyyf Ijfx Agzsr 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm Nwedpfx Aox Nparogzor y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Year of construction: 1997, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, screw diameter: 75 mm, machine/vehicle number: DE27666, TECHNICAL DETAILS Output: 200–450 kg/h Screw diameter: 2 x Ø 75.0 mm L/D: 36D MACHINE DETAILS Control system: Siemens Materials: PE, PP, PS, ABS Nwsdpfx Agsx Npbpjzer Drive: 143 kW (DC) EQUIPMENT Co-rotating twin-screw Degassing Note: Two screw elements are broken. A side feeder connection or S-cylinder can be offered separately.

Condition: good (used), Line filter, power line filter, three-phase filter, three-phase line filter, filter module Njdpfx Agef Dq U Hjzewr -Manufacturer: Siemens, filter module -Type: 6 SN 1111-OAA01-1BAO -Voltage: 440/250 V/3 x 16 A/50-60 Hz -Dimensions: 190/155/H80 mm -Weight: 3.8 kg

Condition: used, functionality: fully functional, Year of construction: 1997, Hydraulic Guillotine Shear Make: HACO Model: HSLX 4008 Year: 1997 Technical Data Manufacturer: HACO Model: HSLX 4008 Year of manufacture: 1997 Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 0.5 – 3° Dimensions: approx. 4.9 x 2.0 /(plus support arms) x 2.2 m Machine weight: approx. 8 t Features • Automatic cutting angle adjustment • Automatic blade gap adjustment • Cutting line illumination • Support arms • Cutting length limitation • Rear gauge 1000 mm • Angle gauge • Circuit diagram Nedox Npxhjpfx Agzjwr All information without guarantee. A powered demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2025, Schnittbereich rund: 530 mm Schnittbereich quadratisch (B x H): 530 x 530 mm Njdpewqchlefx Agzewr kleinste zu schneidende Größe: 20 x 20 mm Einspannbereich: 0 - 530 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 145 x 110 - 270 x 200 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 190 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 2220 mm Breite inkl. Späneförderer : 3530 mm Height: 2530 mm Weight of machine approx.: 3700 kg Electrical connected load: 11,5 kW Leistung des Sägemotors: 7,5 kW Leistung hydraulischer Motor: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 6300 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyPermanent magnetic synchronisation. MotorSaw arm Anti-collision detectionLED work lightLaser line projectionSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMain drive Precision gearboxSplit vice clampingMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 300 Nwodpeiyy I Njfx Agzor ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,990 h, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,900 kg, total length: 7,840 mm, drive type: Diesel, construction width: 2,490 mm, Rotating Telehandler Load Centre: 500 mm Mast Type: Telescopic Transmission: Hydrostatic Speed Class: 20 km/h Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Pneumatic Front Tyres Size: 445/65 R22.5 Front Tyre Condition: 80–100% Rear Tyres Type: Pneumatic Rear Tyres Size: 445/65 R22.5 Rear Tyre Condition: 80–100% Description: The alternative to a mobile crane, wheel loader, or rigid telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is the perfect construction machine for the job. It can handle loads of up to 5,000 kg and work at heights up to 25 m. The versatile 3-in-1 machine (telehandler + crane + work platform) provides a wide range of daily applications. Its four-section boom and 360° rotation capability allow for various handling tasks to be completed from a fixed position. Equipment: - Third hydraulic valve - Work platform pre-installation with radio remote control - Fork carriage PFB/1320 mm Njdox Nz D Nopfx Agzewr - Forks 150 x 50 x 1200 mm - Load backrest - 7'' LCD colour display - Automatic parking brake - Return line - Tyres 445/65 R 22.5 - Reverse warning signal - Rotating beacon - Attachment recognition system - CAN bus control - AdBlue

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Nwedpexy Tm Ijfx Agzor

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 Nsdpju Dw I Ejfx Agzowr With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: good (used), mileage: 101,970 km, power: 110 kW (149.56 HP), first registration: 11/2022, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 3,920 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,800 mm, total width: 2,000 mm, total height: 2,600 mm, loading space length: 3,340 mm, loading space width: 1,760 mm, loading space height: 2,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electric window regulation, navigation system, traction control, = Additional Options and Accessories = - None - Partition wall Nwodpfx Asx Nabyogzer = Remarks = Configuration: 4x2, Curb weight: 2,176 kg, Gross vehicle weight: 3,500 kg, Cabin type: Single cab, Air conditioning, Number of airbags: 1, Parking assist: None, Electric windows, Partition wall, Radio/Cassette, CarPlay, GPS navigation, Color: White, Reversing camera, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Engine power: 110 kW (148 Hp), Fuel type: Diesel, Euro: 6, Drive type: Timing chain, Transmission type: Manual gearbox, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: extended and high, Side paneling: lined, Roof rack: None, Side doors: 1, Rear closure: double door, Central locking, Number of seats: 3, Seating arrangement: 1+2, Upholstery: leather, Seat adjustment: manual, L2H2 Mbux 3-seater / bare Camera 150Hp Airco Euro6!, Spare wheel, Spare wheel tread: 9%, Tire type: summer tires = Further Information = General Information Number of doors: 1 Registration number: KLEYN1 Axle Configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread left: 8 mm; Tire tread right: 7 mm; Suspension: Coil spring Axle 2: Tire tread left: 8 mm; Tire tread right: 8 mm; Suspension: Leaf spring Weights Unladen weight: 2,176 kg Payload: 1,324 kg Gross vehicle weight: 3,500 kg Functional Loading platform height: 55 cm Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €367 per month (panel van, 72 months); Please ask for further information and terms

Condition: new, Year of construction: 2025, Schnittbereich rund: 420 mm Schnittbereich quadratisch (B x H): 420 x 420 mm kleinste zu schneidende Größe: 10 x 10 mm Einspannbereich: 0 - 420 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 160 x 130 - 260 x 160 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 190 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 2220 mm Breite inkl. Späneförderer : 3030 mm Height: 2250 mm Weight of machine approx.: 3000 kg Electrical connected load: 11,5 kW Leistung des Sägemotors: 7,5 kW Leistung hydraulischer Motor: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 5150 x 41 x 1,3 mm Nwjdpfx Aowaa A Segzsr Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyPermanent magnetic synchronisation. MotorSaw arm Anti-collision detectionLED work lightLaser line projectionSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMain drive Precision gearboxSplit vice clampingMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port Nwodsc Rukwspfx Agzor new control board optional - equipment against additional price: screen-pack-changer pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Condition: used, Year of construction: 2020, 2020 | Mercedes-Benz Arocs 1853 Hydrodrive with 3-axle Schwarzmüller K-Series Steel Tipper | Used Tipper Truck | 347687 kms 📍Location: Germany, Lemgo 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 65900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 38 inspection points 38 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Neat truck, perfectly maintained. Everything operates as it should. Very clean inside. No leaks. Strong engine performance. HYDRODRIVE WITH DOUBLE ACTING HYDRAULICS / PTO..1st owner, full service maintenance contract. The following repairs have been recently done with new original parts: Steering gear, radar sensor, triangle control arm, front axle tie rod, steering rod, rear axle stabilizer bar, bushing, V-belt, full maintenance including DPF and oil change, front brakes with discs, rear brakes with pads only, parking brake switch, oil pan, compressor, fuel injection lines, oil filler neck. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40173 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Njdpfox Nyhaox Agzswr ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2006, This FISCHER & RÜCKLE Monguzzi AFD 35 / 2600 veneer guillotine was manufactured in 2006. It features a max cutting length of 2600 mm and widths from 45 to 350 mm. Equipped with a solid, heavy-duty build and a quality hydraulic system, it ensures high productivity and precise cuts. Ideal for preparing veneer strips for splicing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Cutting length: 2600 mm • Cutting widths: 45 - 350 mm • Pressure beam opening: 100 mm • Pressure beam width: 350 mm Nodpsx Nrmbsfx Agzjwr • Parallel fence with digital read-out: 25 - 1000 mm • Cutting angle approx. : 45° • Movable laser lines: for optimizing veneer yield. The manually operated laser line for the position of the front blade is quickly set. The veneer width is transferred to the computer at the push of a button, and the cutting process starts automatically. Extra Information Features: Solid, heavy duty built with generously-dimensioned pressure beam and cutting table to absorb the high clamping and shearing forces. Unique system with fixed, solid cutting table and movable pressure beam. Laser lights for exact visual identification of cutting lines. Quality hydraulic system with large oil tank. Electric-motor-driven parallel stop with rapid adjustment. Industrial computer based on Windows operating system, wide screen and keyboard. Various modes of operation and storable program operations. Extensive collection of production data. Central lubrication unit.

Condition: excellent (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Nwjdpfogrzh Ejx Agzsr Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2025, Dishwasher pot washer Model: S Line 1715 AP Quick Ready System Soft-touch operation with color display Universal dishwasher 3 liters of fresh water consumption 9 wash programs (2 to 12 min) Nsdsm Tr Hdspfx Agzowr Rinse aid and detergent dosing pump Basket dimensions: 550 x 610 x 850 mm, WxDx insertion height DGUV V3 tested drain/drain pump Connection: 400 V, 10.5 kW, 32A-CEE plug Dimensions: 719 x 802 x 1930 mm, WxDxH NEW machine with 12 months warranty and 12 months on parts Accessories included: 1 universal basket inlet and outlet hoses We have a TOP selection of bakery machines!

Condition: good (used), twin decoiler double mandrel 6 ton per side 1400mm wide hydraulic expansion powered rotation with stop start down loop control floor mounted hydraulic coil loading car Nwsdpfx Aoivdn Dsgzjr

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Nwodpfx Agoi Dtbiozer Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Condition: used, Year of construction: 1994, Technical details: voltage: 400/50 V/Hz air-pressure connection: 7 bar control: - operating pressure: 330 bar Nwsdpfexv Awusx Agzer pressure capacity max.: 500 t air pressure - required: 7 bar total power requirement: 15 kW weight of the machine approx.: 1300 kg dimensions of machine: 1,5 x 1,1 x 1,6 m Hose and crimp press · Series production of hydraulic hoses (workshop, repair, production line). · Robust design with high pressing force suitable for large hose diameters and high-pressure fittings. · Clean operation thanks to lubricant-free bearing technology ? longer service life, less contamination on workpieces. *

Year of construction: 1993, condition: ready for operation (used), This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine. Nsdox Nr Ncepfx Agzowr Application Types Welding

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function Njdpjxhmtwofx Agzswr - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: ready for operation (used), Rondo smart line with smart feeder smart line and jumbolino line for sheet and cut of dough or pastry good ex bakery condition with new belts Njdpfx Agjkw Ranozjwr

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Nedpfx Aei Dtb Aogzowr Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Nwedpfsi Dtbqox Agzor