Used Romi D 800 for sale (16)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 016-018828-450, SPECIFICATION Table 914mm x 500mm X axis traverse 830mm Y axis traverse 530mm Z axis traverse 580mm Spindle nose to table 115-695mm Nkedpexzqq Tsfx Ag Ieu Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 22.4kW Rapid feed rate 30m/min Toolchanger capacity 30 tools Approximate weight 5800Kg   MACHINE EQUIPPED WITH: - Siemens 828D CNC Control Renishaw probe 15 0ff BT40 toolholders Coolant system Lighting Guarding

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D ShopMill, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Romi DMC 620-5 was manufactured in 2016, featuring a Siemens 840D ShopMill control, 620/520/460 mm travels, and a spindle speed of 12,000 rpm. It includes a 30-position tool changer and a belt-type chip conveyor. With less than 10,000 operational hours in a single-shift, consider the opportunity to buy this Romi DMC 620-5 vertical machining centre. Contact us for more information about this machine. • Coolant through spindle: 20 bar • Tool changer: 30 positions • Usage: less than 10,000 hours, single-shift operation Additional equipment • Chip conveyor, belt type Technical Specification Taper Size BT 40 Nkedpfx Aex Stlkeg Ieu

Condition: ready for operation (used), Year of construction: 2020, operating hours: 885 h, overall weight: 10,250 kg, controller manufacturer: SIEMENS, controller model: 828D, This 4-axis Romi C1000 was manufactured in 2020. It features a maximum diameter over bed of 1,000 mm and a distance between centers of 3,000 mm. The machine is equipped with a Siemens 828D CNC control system and has a rapid traverse of 8 m/min. If you are looking to get high-quality turning capabilities, consider the Romi C1000 horizontal turning machine we have for sale. Contact us for further details. • Main motor power: 33.6 kW Nkodeynhmaopfx Ag Isu • Maximum diameter over bed: 1000 mm • Maximum diameter over cross slide: 700 mm • Center height: 510 mm • Distance between centers: 3000 mm • Tailstock taper: MT5

Condition: excellent (used), Year of construction: 2008, CNC Lathe ROMI M680 Control: Fanuc Series 21i-TB Year of manufacture: 2008 Turning length: 2,000 mm Turning diameter: 680 mm Max. speed: 1,800 rpm Sauter turret: VDI 40 Nkedpfsylimvsx Ag Isu Equipment: - Three-jaw chuck - Coolant system - Steady rest - Various tool holders - Manual tailstock Weight: approx. 6,300 kg

Condition: ready for operation (used), Year of construction: 2015, spindle speed (max.): 4,000 rpm, travel distance X-axis: 243 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 740 mm, overall weight: 9,600 kg, controller manufacturer: FANUC, controller model: 0i-TD, workpiece diameter (max.): 350 mm, swivel angle B-axis (max.): 830 °, This 4-axis Romi GL 350B was manufactured in 2015. It features a FANUC 0i-TD control unit, a maximum bar passage of Ø 64 mm, and a spindle speed up to 4,000 rpm. With a tool turret of 12 positions and rapid feeds of 30 m/min in X/Z and 18 m/min in Y, it's ideal for efficient turning operations. Consider the opportunity to buy this Romi GL 350B horizontal turning machine. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Max. Bar passage: Ø 64 mm • Tool turret: 12 positions • Tool attachment: bmt-65 Nkodeyi Emaopfx Ag Ieu • Counterspindle speed: 6–6000 rpm • Spindle nose: a2-8 • Counterspindle nose: a2-5 Extra Information Machine still under power Dimensions Machine Depth 2080 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 38,500 h, functionality: fully functional, machine/vehicle number: N/A, clamping force: 100 kN, screw diameter: 42 mm, clearance between the columns: 570 mm, column diameter: 570 mm, injection weight: 250 g, Romi Sandretto Plastic Machine 100T year 2014 In Very Good Condition The Machine Did Low Hours Fully Serviced Njdpfx Agjx Tc Drs Ioku

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,041 h, spindle speed (max.): 2,800 rpm, controller manufacturer: SIEMENS, controller model: SIEMENS 828D, number of axes: 2, This Romi C 510 was manufactured in 2014. It has a hollow spindle with a Ø 65 mm spindle passage, a wedge bar manual chuck Ø 260 mm, and hardened guide surfaces. The tool holder is a Multifix steel holder head B K22. The machine operates at a standard spindle speed range of 56–2800 rpm and has automatic lubrication and cycle functions for efficient operation. If you are looking for a high-quality lathe, consider the Romi C 510 that we have for sale. Contact us for more information. Nkjdpfxsx D I Iue Ag Ieu Additional equipment • Console: Automatic cycle in the longitudinal direction with activation of console recess. Machine Benefits Technical Machine Benefits • Automatic features: tool clamping, hardening of guide surfaces, switching of milling spindle speed, frame cycles, and lubrication of guide surfaces. • Special versions: fully equipped, manual speed control, reduced speed range, manual tightening, numeric indicator for foreign production, and climate-controlled version without a control system. • Guide surfaces: hardened and plated counter surfaces. • Climbing milling: automatic device included. • Automatic tool clamping Extra Information Special Machine Versions: Raised milling headstock, automatic frame cycles, and compliance with foreign standards by agreement.

Condition: good (used), Year of construction: 2012, For sale is a ROMI C 420 cycle lathe, year 2012, Siemens control, extensive accessories. Nksdpfsxnr Nwjx Ag Ieu

Condition: used, Year of construction: 2016, operating hours: 24,580 h, functionality: fully functional, clamping force: 70 kN, screw diameter: 42 mm, The Romi 70T Plastic Machine year 2016 Its In Very Good Condition Have Servo Motor Done Low Hours Nkodpfx Agjyhrplj Ieu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used 5-axis lathe ROMI Type: E 320, Fanuc 18Ti, year of manufacture: 2008, with chip conveyor and accessories. You can inspect the machine under power at our facility. Max. turning diameter: 320 mm Max. machining length: 1000 mm Bar max. diameter: 76 mm Travel (X/Y/Z): 220 x 100 (+60/-40) x 1000 mm Nkodjx Rvd Hopfx Ag Iju Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 18 m/min Feed rate, Z-axis: 30 m/min C-axis: 0.001° Spindle power: 26 kW Rotational speed: 3000 rpm Turret: 12 positions Dimensions: 390 x 190 x 220 cm Weight: 9,500 kg CNC Fanuc Series 18Ti control Chip conveyor Live tailstock Coolant system: 7.5 bar Complete documentation included

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, Control: Siemens 828 D General Speed: 3,000 rpm Power: 9 kW Torque: 140 Nm Chuck diameter: 210 mm (max. 260 mm) Spindle bore: 65 mm Spindle nose: A2-6'' Working area Distance between centers: 1,000 mm Center height: 215 mm Swing over bed: 430 mm Swing over slide: 200 mm Travel Z-axis: 1,065 mm Travel X-axis: 220 mm Tooling system Turret: PARAT 4-position turret head RD 2 Nodpfx Ajx Ahdteg Ioku Tailstock Technology: dragged Centre point: MT-4 (live) Equipment Chip management: chip tray Coolant supply: coolant pump 5 bar Jaw set: 1 set of hardened jaws

Condition: excellent (used), Year of construction: 2005, with loading magazine IEMCA Nksdpfx Agowqpdgo Iou

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: ROMI M680 CNC lathe from 2003, equipped with Fanuc control. The machine comes from an operating workshop and is fully mechanically functional and ready for work. It shows normal signs of use consistent with its age, which do not affect its performance. The Z-axis leadscrew has been replaced, ensuring smooth and precise axis movement. The machine may look “workshop-used” visually, but mechanically it is in very good condition. Complete equipment and tooling as shown in the photos. Technical data: Manufacturer: ROMI Model: M680 Year of manufacture: 2003 Control: Fanuc Swing over bed: approx. 680 mm Maximum turning length: approx. 2000 mm Spindle bore diameter: approx. 105 mm Spindle speed range: up to 1800 rpm Machine weight: approx. 6,300 kg Power supply: 400 V / 50 Hz Technical condition: Fully operational machine – in continuous use, testing on site available. Z-axis leadscrew replaced – smooth, backlash-free movement. Fanuc control fully functional, no errors. Nodpfx Ajx Avz Tsg Ieku Normal signs of use and typical workshop dirt. Mechanically in good condition. Machine ready for immediate operation, technically sound. Robust ROMI construction – excellent stability for heavy-duty machining. Low maintenance costs, readily available spare parts. Fanuc control – intuitive, reliable, and easy to service. Ideal for workshops needing a versatile lathe with a large turning capacity. Feel free to contact me. The machine can be inspected upon prior arrangement. Unloading, loading, and assistance with transport organization are available.

Condition: new, Center lathe and feed spindle lathe Make: ROMI Model: T240 x 1000 Condition: New machine centre height: 220 mm Nksdpfsb Suaksx Ag Iju Center width: 1.000 mm standard equipped with: - 3-axis digital display FAGOR Innova 30i-T - cooling device - Bed stop for automatic switch-off - Quick change tool holder base body size B - Instruction manual

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 002092059405, TECHNICAL DETAILS x-way: 360 mm z-way: 2000 mm speed range: 1800 rpm center height: 340 mm turning diameter: 680 mm Control: Fanuc 21i-T tool holder: Parart turning length: 2000 mm tailstock: KM5 chuck diameter: 315 mm spindle bore: 104 mm MACHINE DETAILS Machine weight: approx. 6.3 t Parts total: 174.782 pieces Control switch-on time: 26,457 h Automatic time: 241 h Njdpemkhlpjfx Ag Ieku Feed time: 5,846 h

Condition: new, Year of construction: 2024, functionality: fully functional, Drive spindle Speed: 3,000 rpm Power: 11 kW Torque: 320 Nm Chuck diameter: 260 mm Spindle bore: 65 mm Spindle nose: A2-6" Working area Center distance: 1,500 mm Center height: 290 mm Diameter over bed: 570 mm Diameter over slide: 510 mm Tool system Turret: PARAT 4-station turret head RD 3 Tailstock Technology: Manual Center: MK-4 (flying) Equipment Chip management: Chip tray Nksdpfeup Slbex Ag Isu Coolant supply: Coolant pump 7 bar