Used Rotary Evaporator for sale (4,272)

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Ibedpfxozt Ipke Acqoa Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm weight 126 kg Ibjdoipyx Nepfx Acqoa Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t Ijdpfoznndkex Acqsba table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min Ibodpfx Aceztrvnoqea table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 3,7 x 2,1 x 1 m

Condition: excellent (used), Year of construction: 2009, operating hours: 4,824 h, functionality: fully functional, power: 5.52 kW (7.51 HP), 1 x Atlas Copco Airpower B.V. rotary screw compressor and refrigerant air dryer mounted on 200L receiver tank. Manufacturer - Atlas Copco Airpower B.V. Model - GX5 FF. Serial number - CAI361147. Date of manufacture - 2009. Working pressure - 10 bar. Ibedpfxjzu Aw So Acqea Working hours - 4824 hours. Electrical requirements: Compressor - 400 V / 50 hz / 3 phase. Air dryer - 230 V / 50 hz / 1 phase.

Condition: good (used), Rotary actuator for air flaps, air flap rotary actuator Ibsdpfxjd Tn Dde Acqsa -Manufacturer: Siemens -Type: GBB161.1E -unused from: warehouse clearance -Quantity: 2 available -Price: per piece -Dimensions: 340/105/H105 mm -Weight: 2 kg

Condition: used, Rotary valve, rotary airlock Ibedoztm H Iepfx Acqja Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Ijdpfx Ajztmxqjcqsba Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 Iedpswuyzwjfx Acqeba ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Ibjdpfx Aowugh Djcqea Approx net weight 15 tons.

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. Ibedpfx Aezr Hw Docqsa With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. Iodpox Dbkcjfx Acqsba ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: excellent (used), Kongskilde cyclone separator with rotary valve Ibodpfx Acjzrlznjqea For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, Vacuum pump, rotary vane pump, sliding vane pump, vacuum pump, cleanroom pump BECKER Type VX 4.40 High Vacuum Pump Serial No.: 2583674 Year of manufacture: 2011 Capacity: 40 m³/h Vacuum: -0.8 bar (determined during test run) Vacuum: -0.9 bar (manufacturer's specification) Suction connection: G 3/4" Motor speed: 1420 rpm Motor power: 1.25 kW Power connection: 400 Volt, 50 Hz - dry-running, oil-free rotary vane vacuum pump - sound insulation made of polystyrene (Styrofoam) Dimensions with sound insulation housing L x W x H: 820 x 460 x 350 mm Dimensions without sound insulation housing L x W x H: 540 x 250 x 280 mm Weight: 45 kg Very good condition Ibodpfx Acszrzyajqoa

Condition: used, Inlet diameter: 260 mm Iedszr Hg Sjpfx Acqjba with sprocket and drive shaft

Condition: used, Inlet cross-section approximately 450 mm Isdpfxozr Hglo Acqoba with SEW gearmotor, 3 kW.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition, having never been used. Available now.. Contact us for further information. Ibodpexy Iq Uofx Acqsa

Condition: like new (used), For sale is a Renishaw XL80 laser interferometer system for machine calibration, suitable for linear and rotary axes, in very good condition. The measuring device is fully functional and has been used very little. It was manufactured in 2022. The device has an accuracy/deviation of 1 nm, and the software is, of course, included in the offer. If you have any further questions, please do not hesitate to contact me. Ibedezrgvmjpfx Acqoa

Condition: used, Rotary table, welding rotator, IMA MA Retainer AK2, Used machine Manufacturer: IMA Automation GMBH Type: MA Retainer AK2 Overall dimensions: Ijdpexupz Defx Acqeba Width: 1480 mm Depth: 1480 mm Height: 1620 mm Electrical data: 400V; Table diameter: 860 mm

Condition: used, Turntable, welding rotator, Bettinelli TR 210, Used machine Manufacturer: Bettinelli s.p.a. Italy Type: TR 210 Overall dimensions: Iodpfx Acoxxk H Ajqeba Width: 950 mm Depth: 950 mm Height: 830 mm Electrical data: 400V; 1.1 kW; 5.9A; 900 rpm Table diameter: 950 mm

Condition: excellent (used), Sullair ES-6 rotary screw compressor Technical details: 7,5 kW 10 bar capacity 0,97 m3/min weight 150 kgs runned hours: 7011 recently serviced Ibodozt Nw Aopfx Acqea

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Ibjdpfeztn S Ssx Acqja Weight 1500kg

Condition: new, functionality: fully functional, Jainnher Machine Co., Ltd. was established in 1982 and is dedicated to developing grinding machine technology, diversity and automation equipment. Jainnher is constantly offering new and improved machinery. The new JAINNHER JHP-4015 CNC Plunge Type machine with FANUC CNC Control. Hydrostatic and Hydrodynamic bearings. Capacity Max ø work swing Ø400 mm Max grinding length 1500mm Max grinding dia. Ø380 mm Max workpiece weight 150 kgs Distance between centres 1500mm Centre height 200mm Grinding wheel Grinding wheel size Ø410 x 50-100 x 203.2mm Max peripheral 33 m/sec Wheel speed 1250rpm Wheel head Feed angle 90 Swivel angle ±0 Rapid traverse speed 6m/min Max. travel 280mm Min. setting unit 0.0001mm Grinding feed rate 0.001~6000m/min Oil Pressure Hydrostatic = 20kg Hydrodynamic = 3kg Tailstock Retraction of quill 30mm Quill diameter 70mm Centre taper MT.4 ( MT.5 option) Hydraulic cylinder pressure 20kg Work head Spindle speed (variable) 10~500rpm/min Centre taper MT.4 ( MT.5 option) Spindle type Telescopic (option Swivel angle 120 (90ºCCW;30ºCW) Work- table Min. setting unit 0.0001mm Swivel angle CCW/CW +7º/-4º Rapid traverse speed 10m/min Max. travel 1500mm Motor Grinding feed rate 0.001~6000mm/min Grinding wheel motor 7.5HP 4P(opt. 10.0HP) 4P Workhead motor 1.5KW Ibedsnzib Eopfx Acqja Work table (Z axis) 1.8KW Work table (X axis) 1.8KW Hydraulic pump 1/4 HP 4P Wheel head pump Hydrostatic = 2.0HP Hydrodynamic = 1.0HP Coolant pump 1/8 HP 2P Magnetic coolant separator 1/25HP 2P Oil cooler ----- Oil tank Hyd. oil tank(slideways, screw ends & measurement) 60L Wheel head lubrication 50L Coolant tank 160L Machine N.W (Fully enclosed) 8080 kg G.W (Fully enclosed) 8480 kg Dimension (Fully enclosed) 4900 x 2100 x 2000mm Packing (Fully enclosed) 5090 x 2200 x 2200mm

Condition: new, functionality: fully functional, he EUROPA JAINNHER JHV-1008CNC vertical grinding machine is designed for grinding of large components used in the transport, aerospace, power generation, oil & gas, hydraulic and precision components. With a grinding internal diameter range from Ø50 to 800 mm, a maximum outside diameter of Ø1000 mm. The maximum height of the workpiece is 800mm, with a maximum worktable load of 1200 kg. EUROPA Jainnher JHV-1008 CNC Vertical Grinder Capacity Range of I.D. grinding 50 – 800mm Maximum O.D grinding 1000mm Z axis maximum grinding height (OD) 800mm Z axis maximum grinding height (ID) 50 – 250 : 325mm / 250 – 800 : 800mm Maximum swing diameter 1000mm Maximum installed component height 800mm Maximum work table load 1200kg Isdpfx Aenzkvhocqsba Email for latest factory build availability

Condition: new, functionality: fully functional, NEW Rotary table surface grinder available in the UK. With up to a 400mm grinding diameter on this rotary table, vertical spindle surface grinder from Italian manufacturer DELTA, a leading surface grinder manufacturer with over 20,000 units sold worldwide. The rotating table is controlled by asynchronous three-phase bipolar motors with 8/16 poles; thanks to these motors, the table can rotate at a speed of 40 rpm and at a rate of 30 rpm. Delta Rotary surface grinder Maximum grindable surface 400mm Ø Distance between column and wheel axis 315mm Max. distance between magnetic table and wheel 205mm Rapid feed per turn of handwheel 2mm Micrometric feed by small handle 0,01mm Size of cup wheel 200 x 80 x 78mm Ø Size of abrasive segments 50 x 20 x 90mm Motor power of the wheel (4 HP)-3 kW RPM of the wheel (50 Hz) 2840rpm/min Electropump motor power (0,08 HP)-0,06 kW Isdpfsnziakox Acqsba Mass of the machine 680kg Rotary table surface grinder Standard Equipment Low tension electric system (24V). Cooling system with electropump Wheel-holder flange and grinding wheel. Grinding wheel guard Table guard.- Stakes key Instruction book/testing certificate Two colour painting RAL 5018-7032, bicomponent multicoat of paint CE conformity certificate with respect to the Units Directive CEE 89/392 and subsequent modifications Stock machine complete with Automatic Downfeed control