Used Sack Vacuum Press for sale (15,456)

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm Fpjdpfx Aaoy Nd Svj Rok stroke 8- 88 mm number of strokes - idle run 130 /min shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: good (used), Year of construction: 2018, operating hours: 6,765 h, functionality: fully functional, In stock Fedeztphhepfx Aa Repk Channel baler HSM VK 4812P, year of manufacture 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Operating hours: 6765 Pressing force: 48 t Drive power: 15 kW Total power: 18 kW Feed opening: 1020 x 1250 mm (W x L) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Tying: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (L x W x H) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, film An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. The sale is ex works, without warranty. Our payment terms are 100% prepayment.

Year of construction: 1998, condition: ready for operation (used), 200 Ton press Fedpfxszp Dnze Aa Repk 230mm stroke Speed 25-35 SPM Die height 500mm slide adjustment 110mm Main motor 20HP Air pressure 5kg/cm2 Y.O.M 1998

Condition: good (used), Year of construction: 2008, operating hours: 195 h, machine/vehicle number: GS000155, Size 36 x 52 cm, Alcolor dampening system, Technotrans cooling and recirculation system, Anicolor inking system, water-cooled chiller, all washers, Autoplate system, low-pile delivery. Fpedpfx Aoztap Nea Rsk

Condition: used, Year of construction: 2005, operating hours: 160 h, machine/vehicle number: RS000562, Size 36 x 52 cm, CPtronic, Easyplate, Alcolor dampening system, banket wash, impression cylinder wash, segmented ink blades, Baldwin cooling and recirculation system. Fpodpfxoztappe Aa Rjk

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Fpsdpfxswzvzmo Aa Rjk

Condition: excellent (used), Year of construction: 2018, Ref: 11136. 2018 Scodix Ultra Pro B2+ digital embellishment press designed to apply raised UV, spot varnish, metallic, foil and other premium effects to digital or litho printed sheets. Used for luxury packaging, book covers, greetings cards, high-end commercial print etc. Features: The Ultra Pro differs from the standard Ultra by offering: • Up to 4 polymer tanks • Automatic polymer switching Fpodpozq Hmpsfx Aa Rjk • Ability to change between different embellishment polymers without manual cleaning • Support for multiple embellishment types on one platform This makes it much more productive if you regularly switch between: • Raised Scodix Sense • Flat Spot UV • Metallic effects • Digital foil • Other speciality polymers The Ultra Pro can produce: • Raised Spot UV (Scodix Sense) • Flat Spot UV • Digital Foil • Metallic effects • Variable Data Enhancement (VDP/VDE) • Cast & Cure • Crystal effects • Braille • High-gloss textures Specification: Maximum sheet size 545 × 788 mm (B2+) Minimum sheet size 297 × 420 mm Maximum print area 504 × 748 mm Speed Up to 1,250 B2 sheets/hour Resolution Up to 2,540 × 450 dpi Registration 4 CCD camera Scodix RSP™ (Rotate, Scale & Position) Polymer thickness 5–250 microns Stock weight 135–675 gsm Maximum stock thickness 700 microns (0.7 mm) Supported substrates Offset, digital, laminated, coated, plastics and PVC Variable data PDF workflow with optional barcode system Machine dimensions: 6,327 × 1,788 × 1,889 mm Weight: approximately 4,400 kg Power: 3-phase, 220V, average 13.5 kVA (30 kVA max) Compressed air: 7 bar regulated

Condition: good (used), Year of construction: 2000, Gebruikte 3,6 meter CNC-kantbank van Haco Type: ERM 36150 Capaciteit: 3600 x 150 ton Fedpjztaxdsfx Aa Rspk BC55 CNC-besturing Bouwjaar: 2000 CNC-bombering Euro-gereedschapsklemming

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations Fjdpeuhf Tzjfx Aa Rjpk CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: used, total length: 3,800 mm, total width: 1,650 mm, total height: 2,400 mm, Colour: Green Empty weight: 3.500 kg - Details: - └ Description: The plates need to be repaired - Documentation available: No Fedsztc R Aepfx Aa Repk - CE certificate present: No - Main motor power [kW]: 2.2 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 450 - Total stroke [mm]: 450 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 1 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 70 - Heating boiler present: Yes - Heating type: Oil heated - Max. temperature [°C]: 120 - Top/bottom separately heated: Yes - Voltage [V]: 400 - Fuse [A]: 32 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1650mm x 2400mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Xerox Versant 4100 Including: Fsdpfx Aoychr Eea Rspk Fiery EX 4100 1 x OHCF (Optional Handling and Finishing) FIM (Feeder and Inserter Module) C/Z fold unit Booklet maker The machine is in perfect working order!

Condition: good (used), Used machine, good condition. Delivery time appr. 7-8 weeks after ordering *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Fpjdpfofmqq Eox Aa Rjk Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Fsdpfxsztyw He Aa Rspk Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Overhang (mm): 100 Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Fjdpov Tp D Hefx Aa Rspk Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, machine/vehicle number: 008695, Max working length: 2500 mm Max working width: 1300 mm Pressure Exerted: 2 Kg/cm2 No of Pressing cylinders: 4 Fpjdpjztkbpofx Aa Rok

Condition: ready for operation (used), RINGLER Industrial vacuum cleaner Fedjxc Eq Rjpfx Aa Repk Type: AT-D 4.0 kW Device no.: 96231 Year of manufacture: 1989 Equipment: - Suction hose, new - Chassis - Documentation

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW Fsdpfsztvwijx Aa Rspk - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R 2 units available Container for skip loader trucks 20 cubic meter usable volume Technically refurbished Fpedpfx Aaozt Nirj Rok Repainted in desired RAL color Side hook connection Discharge door hinged at the top

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg Fsdpfezr Inwox Aa Ropk - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, functionality: fully functional, Press force: 50 t Bending length: 1275 mm Frame width: 1040 mm Fpsdpfjzt R Hrjx Aa Rek Stroke: 215 mm Usable installation height: 385 mm Overhang: 420 mm Standard equipment: - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Electro-hydraulic upper drive via proportional valves - Modern block hydraulics - CNC back gauge with rack and pinion drive for the X and R axes - Safe shifting of the gauge fingers from the front - Upper tool clamping system "New Standard Clamping II" manual - Lower tool holder for EV dies, clamping hydraulic, shifting programmable (2 positions) - Control system TRUMPF TASC 6000 - Safety device consisting of side and rear protective doors - Control cabinet air conditioning - Network compatible Optional equipment: - 2 additional gauge fingers, attachable - Upper tool clamping hydraulic - Bendguard - Roll protection cover at the rear - Support console - Preparation for ACB

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 445 mm Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch Fpodpezt R Euofx Aa Rjk - Wila quick-release system at the top and bottom - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning - 6-axis back gauge

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Fpsdpjzt R D Dofx Aa Rsk Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Equipment: -CNC control Cybelec DNC 880 S -2 support arms -Foot switch -Side protective doors -Laser safety system -Tool holder EHT -Pneumatic die shifting system -Crowning -Controlled axes: y1, y2, x, R

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Fjdpfxozt R A He Aa Repk Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s

Condition: used, Year of construction: 2012, total length: 750 mm, total width: 750 mm, total height: 950 mm, Empty weight: 100 kg - Year: 2012 - Documentation available: No Fodpfxewgafms Aa Rspk - CE marking present: Yes - CE certificate present: No - Serial number: H2634320 - Transport dimensions: 750mm x 750mm x 950mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Fpedj E Dquepfx Aa Rsk Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result