Used Sack Vacuum Press for sale (15,486)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Fully functional and well maintained Hfsdpfx Asw Adkfshajh Complete with control cabinet, fences and hydraulic unit, valves etc. Various fruits such as apples, pears, grapes, berries, raspberries, strawberries, quinces, pectin, carrots and other fruit and vegetable can be processed on this press. Prompt delivery.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 9825, The 2024 general overhaul includes, among other things, the die head, hydraulic nut, bearings, main shaft, oil pump with filter, and synthetic oil. Only the steel housing is older but is in excellent condition. The images of the production line in the hall date from before the overhaul. The individual images of the Amandus Kahl pellet press show the condition after the overhaul. TECHNICAL DETAILS Motor power: 110 kW Sawdust capacity: 2.5 – 3 t/h Biomass capacity: 3 t/h Bran capacity: 3.5 – 4 t/h Straw capacity: 2 – 2.5 t/h L/D ratio: 3.67:1 MACHINE DETAILS Dimensions of press (W x H): 1,450 x 1,900 mm Diameter of press: 2750 mm Insertion depth: 6 mm Press length: 22 mm Year of manufacture of motor: 2024 Year of manufacture of cooler with sieve: 2015 Year of manufacture of conveyor belt: 2015 Year of manufacture of feed screw: 2015 EQUIPMENT Amandus Kahl C35-780 pellet press with base plate New 110 kW electric motor Electric control cabinet with emergency stop Complete electrical documentation Conveyor belt Sieve system with automatic cooling Hydraulic nut Die head Electrical wiring Hodpszaricjfx Ahajfh Metering screw for product feed Automatic metering system for filling 4 additional dies, 6 mm 60 liters of additional synthetic oil 7 new bearings 2 new wear rings 1 new air filter 2 new oil seals 1 new oil filter 1 new oil pump 20 liters of 800/460 synthetic oil 1 new thrust piece (main shaft) Documentation of overhauled and renewed parts

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 8900, functionality: fully functional, pressing force: 20 t, stroke length: 60 mm, throat depth: 176 mm, ram adjustment: 55 mm, stroke rate (max.): 155 1/min, TECHNICAL DETAILS Pressing force: 20 t Stroke rate: 155 strokes/min Ram stroke: 6 - 60 mm Ram adjustment: 55 mm Ram contact area: 130 x 248 mm Dowel hole in the ram: 25 x 65 mm Inclination: 28 ° Overhang: 176 mm Distance from table to ram: 270 mm Passage width: 470 mm Table dimensions: 300 x 450 mm Through hole in the table: 90 mm Table height above floor: 775 mm Air pressure (required): 5.5 - 6 bar MACHINE DETAILS Total power consumption: 3.5 kW Control type: conventional Dimensions & Weight Machine dimensions (L x W x H): 1,300 x 1,100 x 1,950 m Machine weight: 1 t EQUIPMENT Hedpfozb Du Hjx Ahaefh High-performance press Central lubrication with light curtain (monitored) Linuflex Stroke counter Steel plate (dimensions: 315 x 400 x 50 mm) with center hole (diameter: 63 mm)

Condition: ready for operation (used), Year of construction: 2007, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Travel range of the back gauge: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support table: 200 x 275 mm Overhang: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing speed: 8-10 mm/s Retraction: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual Safety device Mechanical tool clamping system (top) Hfodjzdd Rgopfx Ahajh

Condition: good (used), Year of construction: 2013, IFP Europe KP 50 HMA Basic Vacuum Parts Washer Mfd. 2013 S/N: 201305-00974 Specifications: Number of Baskets per Wash Cycle 1 Basket Size 11.9″ x 7.9″ x 17.7″ Machine Dimensions 70″ x 103″ x 70″ Chiller Size 5 ton Solvent Capacity 106 Gallon Wash Cycles Per Hour 4 to 8 Chamber “Max. Load Weight” 110 lbs Machine Weight 4,000 lbs Equipped With: Rotos & Vane Pumps, Liquid Ring Tank, Rust Inhibitor Tank Filter, Waste Oil Separator, Siemens Touch Screen Control, Budzar BWA-AC-05-FCB-12-0-000 5-HP Chiller, Safety Guarding, Light Curtains, Automatic Door, (3) Wash Settings, Rust/Vap/Mist/Vac/Oscillation Settings, 100-Lb. Batch Weight Hfjdpfxsx Ddc Is Ahajh Repairs necessary: Pumps C301.00020 DVP LC106 Vane Pump — $5,500.00 C301.00078 Liquid Ring Pump — $3,561.55 C301.00081 RBS 45 Rotary Lobe Pump — $13,500.00 Pump Subtotal: $22,561.55 Accessories / Pipes for Conversion A508.00031 — $287.50 A508.00012 — $287.50 A508.00013 — $345.00 Accessories Subtotal: $920.00 Grand Total $23,481.55

Condition: used, machine/vehicle number: 008256, Max width workable: 800 mm Hfodsx A Hfvspfx Ahaoh Max length workable: 2500 mm Max height workable: 1340 mm Max feed speed: 40 m/min

Condition: used, machine/vehicle number: 008254, Max width workable: 700 mm Hfodpfjx A Hfpjx Ahaeh Max length workable: 2600 mm Max height workable: 1300 mm

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm No of Pressing cylinders: 4 Hfsdjx A Tf Aepfx Ahajh No of Daylights: 1

Condition: used, Year of construction: 1999, color channels: 8, We offer this used Heidelberg Speedmaster 74 8 Color Plus Coater 4/4 offset printing press, year of construction 1999. Manufacturer: Heidelberg Model: Speedmaster 74 8 Color Plus Coater Perfecting 4/4 or Straight Hfjdpfx Ahoynvursaeh Year of manufacture: 1999 Console CPC 1.0.4 Technotrans Cooling Unit Condition: used Category ID: 839 Type ID: 520 Type: offset printing press If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Hjdpfx Aexnikljhasfh

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Machine was tipped on its side during transit and was damaged. Hfjdow Nbh Hjpfx Ahash Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Condition: used, Used concentration / evaporation system previously used to separate water from surfactant. Capacity for this process was approximately 8-12 m3/day of water/surfactant mix. System was built by Ecotecno during 2011/2012 and was shut down in April 2022. Process Description Hedozcwitepfx Ahaefh The concentration unit was used from 2012 to 2022 to distil wastewater to a solid content of around 40%. Based on owner's experience, the flow rate was between 8 m³ and 12 m³ per day. The unit consists of a distillation vessel (S101) operated under vacuum, with a pipe heat exchanger (E101) functioning as the condenser, through which the wastewater is pumped by the circulation pump (P102). The pipe heat exchanger heats the wastewater for distillation. The concentrated wastewater can later be removed from the system by pump (P103). Vapors enter the plate heat exchanger (E102) and enter the accumulator (S103) as condensed liquid, this is removed from the unit. The non-condensed vapor passes through the vacuum pump (P101) and enters the vacuum pump vessel (S102), where it is cooled with an internal spiral. System can be described as a single effect vacuum evaporator with condenser. Includes flash reservoir in vacuum, distillate tank, vacuum tank, plate heat exchanger. Full documentation for equipment available.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, oil tank capacity: 1,300 l, power: 75 kW (101.97 HP), year of last overhaul: 2025, For sale is a overhauled Bollegraaf baler, with 100 tonnes pressing force, large bale format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding system Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a Hfjdjzdn H Rspfx Ahash bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 1963, total length: 2,300 mm, total width: 1,500 mm, total height: 2,880 mm, Empty weight: 8.000 kg - Year: 1963 Hfodswmfrrspfx Ahash - Documentation available: No - CE certificate present: No - Serial number: 12691 - Drive system: Conventional - Press force [ton]: 160 - Min. stroke [mm]: 25 - Max. stroke [mm]: 118 - Table length [mm]: 950 - Table width [mm]: 650 - Ram width [mm]: 340 - Height adjustment [mm]: 75 - Motor power: 7.5kW - Transport dimensions: 2300mm x 1500mm x 2880mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1989, total length: 1,600 mm, total width: 1,700 mm, total height: 2,750 mm, Empty weight: 4.000 kg - Year: 1989 - Documentation available: No - CE certificate present: No - Serial number: 4414 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 8 - Max. stroke [mm]: 100 - Table length [mm]: 800 - Table width [mm]: 560 - Ram width [mm]: 300 - Motor power: 5.5kW - Transport dimensions: 1600mm x 1700mm x 2750mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hfsdpfx Aex Dkfpohaoh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Empty weight: 500 kg Hfedpfx Aoxhcgyehajh - Year: 1981 - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Hsdsylb Edjpfx Ahaofh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, total length: 2,700 mm, total width: 1,700 mm, total height: 3,900 mm, Colour: Green Empty weight: 5.000 kg - Year: 2009 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Press model: Workshop press - Press force [ton]: 200 - Min. stroke [mm]: 1 - Max. stroke [mm]: 1100 - Table length [mm]: 730 - Table width [mm]: 1900 - Transport dimensions: 2700mm x 1700mm x 3900mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hfsdpfx Aszdnzhshajh Lukas van Rossum

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Hfsdozdufyopfx Ahash Width 1000 mm Depth 780 mm Weight 325 kg

Condition: new, Here we offer a ULVAC dry vacuum pump. ULVAC dry vacuum pump Solution for demanding process applications Dry vacuum pump ULVAC's unique approach to utilizing the latent heat within the pump body enables the LR/HR/UR series to deliver performance even in the most demanding processes. ULVAC has focused its design efforts on maintaining an extremely uniform, high temperature across all pump stages, optimizing this pump family for CVD and etching applications. Compatible with the ULVAC ECO-SHOCK system for additional energy savings. Features: The LR series pump is designed for load lock chambers and PVD processes. Hfjdpfx Ahozdqtgjaoh ULVAC's unique aluminum design enables very uniform temperature distribution throughout the pump body: The ULVAC LR series pump is designed for applications that require a heated pump, heated gas lines, and/or heated exhaust lines. Excellent helium pumping capacity Sealed motor for safety and ease of maintenance Withstands power interruptions of up to 500 ms. Internal components are specially treated to ensure a high degree of surface hardness and excellent corrosion resistance. This prevents the wear of internal pump parts when exposed to corrosive gases. (LR series) Designed for process gases that generate powdery byproducts, such as Si crystal growth furnaces. Pre-pump for turbo-molecular and mechanical booster pumps Type: LR600 Condition: new Scope of supply: (See image) (Subject to changes and errors in technical data and specifications!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a Pfeiffer vacuum pump station. Pfeiffer vacuum pump WKP 500 A Model PP W31 928 / X 2161 n: 2800 1/min Oil: P 3 1.5 l S(N2): Theoretical 500 m³/h Hsdpfx Aszdqr Njhaefh Weight: 125 kg Motor type: EELQ-8T Oerlikon Leybold SCROLLVAC SC 60 D Ultimate pressure: 0.01 mbar Motor: 3-phase, 200/400 V, 50/60 Hz Pumping speed (50 Hz): 52 m³/h Pumping speed (60 Hz): 62 m³/h Oil-free High effective pumping capacity Low ultimate pressure Low-vibration operation Type: WOD 410 B Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Leybold Trivac oil-sealed vacuum pump. Leybold Trivac oil-sealed vacuum pump with exhaust filter. Leybold TRIVAC D 25 B oil-sealed vacuum pump. 2.5 x 10⁻³ mbar Pumping speed (50 Hz): 25.7 m³/h Pumping speed (60 Hz): 30.8 m³/h Exhaust filter with oil return ARS 16-25 Type: D 25 B Condition: used Scope of delivery: (See picture) Hfsdpfx Ahjzdqq Ejash (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Here, we offer a Busch rotary vane vacuum pump. Busch rotary vane vacuum pump p 0.1 hPa (mbar) Oil: Busch VM 100, 1.00L Weight: approx. 450 kg Type: RA 0040 F 503 Condition: used Scope of delivery: (See picture) Hodpozdqqlofx Ahasfh (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: good (used), Here we offer a vacuum pump for sale. Nominal suction capacity: max. 94 m³/h Oil volume: D1 1.8L Hfodpfxszdqqfs Ahaeh Type: UNO 90 Condition: used Scope of delivery: (vacuum pump as shown in the picture) The vacuum pump comes from the liquidation of a project. We would be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: good (used), Here, we offer a Pfeiffer vacuum turbo pump. Pfeiffer vacuum turbo pump 1 Pfeiffer TMH 1000M P turbo-molecular pump 910 l/s, weight: 50 kg Type: TMH 1000M P Scope of delivery: (See image) Hfedozdqp Ujpfx Ahajh 2 weeks start-up warranty The unit comes from a warehouse liquidation. We also offer express shipping (DHL, UPS, TNT). We would be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.