Used Sallmetall Laminator for sale (823)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total length: 9,100 mm, total height: 2,900 mm, total width: 4,600 mm, product height (min.): 20 mm, product length (max.): 6,200 mm, product width (max.): 2,600 mm, overall weight: 40,500 kg, Double production solar panel laminating machine The laminator is used for manufacturing solar modules or composite materials. Multiple layers of materials are bonded together and fed into the laminator. The materials are laminated under the influence of pressure and temperature. The lamination process is conducted under vacuum to prevent unwanted entrapped gases in the final product. Pgjdpfxsxzrvke Af Ijg Finally, the finished laminate is conveyed out of the laminator. The machine comes with many spare parts and can be seen in operation.

Condition: good (used), Selling CRATHERN, PERONDI IA630, NA 900. Psdpfx Asud Axgof Iegg

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Hydraulic trolley beam punch hydrl. pressure 250 bar Podpfx Afju Szfuo Isgg Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Condition: used, Year of construction: 2002, Technical details: thickness: 0,6 mm width: 1200 mm Length: 100 mm work speed: 1,5 - 3 m/min motor power: 45 kw compressed air: 7 bar Total weight, approx.: 4500 kg dimension machine xH: gesamt: 20 m / 2,6 m / 3 m m 2 pcs Sandwich Panel Production Plant The plant is especially suitable for producing light laminated panels. The plant consists of a feeding system (conveyor belt) for the material, cutting system, profile system and an electronically control system. The plant has a length of 20m, width of 2,6m, height of 3m. The total weight of the plant is approximately 4,5 tons. The power consumption including the thermal output is 36 KW. The recommended material of the internal layers are flame retardant Polystyrol or other light heat insulation materials. The sheet will be stable connected under pressure and heat with the Polystyrol through double sided application from portions of glue on the Polystyrol. The panels have good physical characteristics such as thermal insulation, sound insulation, wet consistency, bending strength, compressive strength and mechanical attributes. Any length of the laminated panels is possible and adjustable on customer demand. The color of the panel is variable and is depending from the color of the used sheets. Data Sheet Power Consumption of the plant (with heating system): 36KW Measurements: - Length = 20m - Width = 2,6m - Height = 3 m - Operating Temperatures: The optimal temperature for producing the panels is approximately 25 °C. - Material: galvanized metal sheet on rolls, sheet thickness 0,3 – 0,6mm and a width of 1200mm - Power Supply: 380 V 50Hz - Maximum engine power: 45 KW - Compressed Air: 7 bar Measurements of the laminated panels: Model 1 - Width 800 – 1200 mm - Thickness 20 - 30mm Pgedpeu Nxa Hofx Af Ijg Model 2 - Width 1150 mm - Thickness 50 – 150mm( adjustable) production plant consists of: - unwinding device - feed system - lamination - cutting device - glueing - fume extractor device - stacking device - electronic control system (Mitsubishi) *

Condition: used, Year of construction: 2004, Back Coating Line Laminating Machine FRIZ, type Profi FBS 130, year 2004 Pedpfx Afeyay Rus Iegg

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1800 Measurements depth 3450 mm Measurements height 950 mm Table Table load 200 kg This BARTH VMPH 3013 laminating press was manufactured in 2015. It features dimensions of 3450 x 1800 x 950 mm and a clamping area of 3000 x 1320 mm. The vacuum table supports up to 200 kg with a maximum vacuum pressure of -0.95 bar. It operates on 400 VAC/50 Hz with a connected load of 12 kVA. Consider the opportunity to buy this BARTH VMPH 3013 laminating press. Contact us for more information about this machine. Application Types Pressing / Laminating Pedpfjx Nr Ufox Af Ijgg

Condition: used, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Good condition without any damage Podpfx Aoxb Dn Sof Iegg Maximum paper size 540 x 800 mm Minimum paper format 210 x 200 mm Paper thicknesses from 120 to 350 g/qm2

Condition: excellent (used), Year of construction: 2001, Jumbo roll Ø paper max. 1600 mm Jumbo roll width min. 560 mm Jumbo roll width max. 1400 mm Jumbo roll Ø PE, PET max. 1000 mm Expanding chucks Ø 76 mm, 100 mm, 150 mm, and 300 mm Speed depending on material: 200 to 300 m/min. Pgjdpfx Afsxlkckj Iog The Bielloni Castello Julia 2 SL laminating machine can process single-component PU adhesives with 100% solid content (solvent-free). The adhesive is applied via a sleeve system. Dispersion adhesives cannot be processed. The system does not feature a drying unit. The PU adhesive is applied to the paper web using heated rollers (approx. 70–90 °C). The bond between paperboard and film is achieved by pressure and subsequent self-curing. Paper grammage: 120 to 600 g/m², coated with PET min. 8 µm to max. 75 µm PE min. 20 µm to max. 75 µm The machine can be demonstrated in production.

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 5000 kg This HRB HRB-1450F was manufactured in 2021. A robust laminating press, it handles a maximum sheet size of 1450 × 1200 mm and operates at speeds up to 6,000 sheets/hour. Powered by a 380V / 50Hz supply and weighing approximately 5,000 kg, it remains in excellent condition and is still in production. If you are looking to get high-quality laminating capabilities, consider the HRB HRB-1450F machine we have for sale. Contact us for more information. Application Types Pedpfx Ajx R E Rcsf Iogg Pressing / Laminating

Condition: refurbished (used), functionality: fully functional, EXTRUDER UNIT FOR BRICKS AND CERAMIC BLOCKS BRAND: BEDESCHI MODEL: SL 750 EXTRUDER DIAMETER: 750 mm (cylindrical) PRODUCTION CAPACITY: 120 tons/hour (at 12 bar pressure) SCREW ROTATION SPEED: 10 / 17 rpm (controlled by ABB ACS 800 VECTOR INVERTER – 693A Output) Pgodpfx Aex U Ukasf Ijg TRANSMISSION: DIRECT DRIVE WITH BREVINI PDL 702 GEARBOX (remanufactured) AXIAL RETENTION: SKF 29452 Series E (new) DISC CLUTCH (2 units) GENERAL REFURBISHMENT: Blades, linings, pins, seals, clutch discs, paddle shaft bearings, blade sets, axial bearings, vacuum chamber lining (stainless steel), bearings for electric motors Operational test performed, painted and aesthetically finished. COMPLETE WITH: • HYDRAULIC OIL SYSTEM FOR GEAR SHIFT, FILTER, DEGASSER OPERATION • 2 WEAR-RESISTANT METAL-PLATED FILTERS FOR HOLES • CENTRALIZED LUBRICATION UNIT WITH FILTER • DISC CLUTCH (FOR EXTRUDER + DEGASSER) • ORIGINAL BEDESCHI DRIVE BELTS (FOR BOTH UNITS) • EXTRUSION MOTOR 315 KW, 6-POLE (original Bedeschi) • DEGASSING MOTOR 75 KW, 6-POLE • MOTOR LUBRICATION UNIT • VACUUM GROUP MOTOR 30 KW, 4-POLE • MAIN DRIVER ASSEMBLY WITH BELT TENSION ADJUSTMENT GUIDES • EXTRUDER BASE FRAME • DEGASSER UNIT • INLET PULLEY SUPPORT • DEGASSER WITH 2 COUNTER-ROTATING SHAFTS WITH PADDLES (VACUUM CHAMBER) • SLEWING JIB CRANE (original Bedeschi) with electric hoist ACCESSORIES INCLUDED IN THE SALE 1- 3 DIE HOLDERS BY TECNOFILIERE (ITALY) 2- 1 FLANGE WITH BOLTS FOR 2 SIMULTANEOUS DIES 3- 1 ABB ACS 800 INVERTER CABINET (extruder motor) 4- 1 OIL VACUUM PUMP UNIT 30 KW 5- 1 400L VACUUM STORAGE TANK MORANDO LV 8/12 HIGH-SPEED ROLLER MILL (refurbished) TECHNICAL SPECIFICATIONS Original manufacturer: MORANDO IMPIANTI Type: HIGH-SPEED ECCENTRIC PRESS, ELECTRONIC ACTUATION Cylinder width: 1200 mm Cylinder diameter: 800 mm Complete with: • Original Morando base platform • 01 complete spare roll for quick replacement (bearings, shaft, pulley) • Original Morando material inlet cover • Hydraulic control unit for structural load management • Servo-driven rolling gap calibration system • Original Morando documentation Mantle Condition Fast roll: 80% Slow roll: 60%

Condition: good (used), Glass laminating system Type: Vacuum glass laminating system HVD-G02 Vacuum glass laminating system Glass laminating system, with 2 heating devices TOOL TEMP Model type TT-138B, S/N 310-1877-1, 310-1877-2 Laminating area approx. 2,900 x 1,400 mm, with feed table, stainless steel Control cabinet, area approx. 2,600 x 1,250 mm Control tower PC, 17" LCD monitor ACER Model/type AL711, mouse, keyboard The system consists of the following main components: Vacuum chamber (chamber + lid) Pneumatic lid drive Transport roller conveyor Lifting device Heating plates Chamber frame Vacuum technology (pumping station, valves, lines, feedthroughs, measuring technology, etc.) Pressure water temperature control device (2 piece) Pedsdkp D Hspfx Af Iogg Transport pallet Lifting frame Control with control panel Technical data: Step-by-step pumping via valves adjustable up to 0.01 mbar; Heating / cooling: time adjustable via control Heating temperature directly adjustable on the pressurized water temperature control device (max. 140

Condition: used, Year of construction: 2011, working width: 1,700 mm, total length: 18,000 mm, roll diameter: 1,400 mm, For sale: coating machine for paper, cardboard, or film using solvent-based or water-based adhesives. The machine is in perfect condition and in continuous production. Coating and laminating line for paper and film, Jiangnan TB 1620, year of manufacture: 2011. Machine name: COATER Manufacturer: RUIAN JIANGNAN MACHINERY Co. Ltd CHINA Model: TB 1620 Year of manufacture: 2011 Serial number: 751 Working width: 1700 mm, material in rolls Raw material: paper (50-300 g/m2), film (0.023-0.10 mm) Adhesives: solvent-based adhesive, water-based adhesive Coating type: Mayer rod, anilox roller, slot die roller Dryer: 18 m long, 7 drying sections, temperature 30°C-170°C, gas heating (blower) Maximum roll diameter: 1400 mm Psdpfx Asyabzbsf Ijgg Also suitable for simultaneous lamination. The machine is in perfect condition and in continuous production. For questions or further information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16004D, type of input current: three-phase, input voltage: 380 V, working width: 1,220 mm, Equipment: compressor, For sale: dual-system laminator by KDX. Year of manufacture: 2016, the machine is in good condition and fully operational. Laminating working width is 1,220 mm, maximum sheet length is 1,650 mm. I will send full documentation to interested parties. The laminator is capable of both thermal and wet lamination (dispersion adhesive). It is equipped with a "hot knife" with automatic angle separation adjustment. In addition to the hot knife, it has two additional separation systems and a highly precise electromagnetic cylinder heating system. Podpfx Ajwunyhsf Isgg

Condition: good (used), D&K Europa System B2 Laminator The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Pgedpfox N I Tqox Af Ijg Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: used, Year of construction: 2003, The Billhoefer MTS 104 is a high-performance laminating machine designed for professional print finishing. With a working size of 1045 x 1135 mm, it handles both large and small formats, supporting substrates from 150 to 450 g/sqm and foil thicknesses of 24 to 40 microns. Equipped with a flat pile feeder IA 20, suction feeder head, automatic rotary separator ITM 104, and jogger, the MTS 104 ensures smooth operation and consistent results. Its impressive speed range of 2500 to 4500 sheets per hour makes it ideal for demanding production environments. Currently located in Germany and actively used in a printshop, this machine combines reliability with versatility for a wide range of laminating applications. Format: 1045 x 1135 mm Pjdpfjxgm T Ijx Af Iogg Equipment: Thermal laminating Flat pile feeder IA 20 Suction feeder head Automatic rotary separator ITM 104 Jogger Maximum laminating format: 1045 x 1135 mm Minimum laminating format: 215 x 215 mm Substrate thickness: 150 - 450 g/sqm Foil thickness: 24 - 40 microns Speed: 2500 - 4500 sheets/hour

Condition: good (used), Year of construction: 2015, Coating Machine Tech. Data: - Sheet size min.: 200 x 250 mm / max.: 520 x 740 mm - Max. speed: approx. 32 m/min - Pile height: 500 mm - Paper weight: 115 - 350 g/m² Pgsdsx R Uvzepfx Af Ieg - Power supply: 400 V, 50 Hz, 24 A - Dimensions (LxWxH): 352 x 135 x 125 cm (incl. table) - Weight: approx. 750 kg - Coating machine for UV and dispersion varnishes as well as primers - Suitable for all types of paper and cardboard - Central touchscreen control panel - Fully automatic pile feeder with KOMFI feeder head - Air knife in the coating unit - 3-roller coating system - Heated coating transfer roller - IR unit with hot air blower - Adjustable UV lamp with premium-quality reflector - Simple varnish refill system - Compressed air connection required - Vacuum pump included

Condition: good (used), Primultini cutting band saw Pgodpjd Sclhofx Af Ijg Roll diameter 1300mm Roll width 140mm with Planomatic system

Condition: excellent (used), Raimann B4 cutting band saw Pedpfx Afjdyccde Ijgg

Condition: used, Year of construction: 2007, operating hours: 1,234 h, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, Hello. My profession is picture framing. A few years ago, I retired and have decided to sell the machines I no longer need. One of them is a BVP 65 E /380 Biedermann vacuum laminating press - 1.80x1.30 m. I mostly used it to laminate posters, which I would then frame. However, you can also laminate graphics, drawings, photographs, silk, and batik. Pgsdpfx Asx Dq A Iof Ieg The image is bonded to MDF in the machine using heat and pressure with a special film. At the same time, a laminating foil is applied to the image. The finished product is protected not only against dirt but also against UV radiation, and it is overall very lightweight. The lamination surface can be smooth or textured like canvas. Pictures with a textured surface look like they were painted on canvas. Various laminating films are included in the price—see the photo. The vacuum press is in good technical condition. Thank you for your response and have a nice day.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 1790051, working width: 1,000 mm, Laminating system Pjdpfxexy Rb Ns Af Iegg

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained Psdpex Eb Abefx Af Isgg - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: used, The Matrix 530 Laminator is a versatile and efficient machine designed for high-quality lamination tasks. This machine is currently in stock and located in Germany. It can handle a maximum sheet width of 550 mm and operates at a maximum speed of 10 meters per minute, ensuring quick and efficient lamination processes. The 530 Laminator supports a maximum film width of 500 mm and is capable of one-sided lamination. It features mechanical, adjustable pressure settings to accommodate various material thicknesses, starting from 135 g/qm2. The machine is compatible with foils that have a core diameter of 76 mm, making it a reliable choice for a wide range of lamination applications. Format: 550 mm Equipment: Max. sheet width: 550 mm Max. speed: 10 m/min Max. film width: 500 mm Lamination: one-sided Pressure: mechanical, adjustable Material: from 135 g/qm2 Pedpswc Alnjfx Af Ijgg Core diameter of foils: 76 mm:

Year of construction: 2007, condition: excellent (used), machine/vehicle number: T805L30030, Max. Laminating Width : 800 mm Pgjdoh Nxy Uepfx Af Iog

Condition: used, Year of construction: 2004, functionality: fully functional, D&K Pegasus Semi Automated Laminator with format B2 Feeder. Removed from printshop sold Ex works. Sold Ex works Have powered up machine and rollers heat up and belts turn over. Collection Tadley near reading UK The D&K Pegasus is an entry-level thermal laminating machine designed for low- to medium-volume production. When equipped with an automatic feeder, it transitions from a manual-load system to a more efficient, automated workflow. Machine Specifications (D&K Pegasus) Format Size: Designed for prints up to B2 size. Maximum Sheet Size: Typically 540 x 740 mm (varies slightly by regional configuration). Operation: Features a belt-driven in-feed and an integral burster (sheet separator) for one-man operation. Applications: Ideal for thin, economic laminates and single-sided thermal lamination. Feeder Options The Pegasus can be fitted with several feeder types to increase productivity, often retrofittable as your volume grows. Accufeed A2 (Common Entry Feeder): Max Sheet Size: 450 x 650 mm. Min Sheet Size: 90 x 60 mm. Min Stock Weight: 70 gsm. Features: Low-cost, efficient, and comes with a supplied compressor. Accufeed 760 / 1020 (High-End Feeders): Accufeed 760: Max sheet size 685 x 760 mm. Accufeed 1020: Max sheet size 685 x 1020 mm. Technology: Uses an Accufeed Belt Stream System and integrated vacuum pump for accurate high-speed feeding. Key Benefits of the Full System Psdjx Nrf Ropfx Af Iegg One-Man Operation: The combination of an automatic suction feeder and the integral separator allows one operator to manage the entire lamination process. Productivity: Automatic feeding removes the bottleneck of manual hand-feeding, significantly increasing sheets-per-hour. Versatility: Suitable for various digital and offset stocks with adjustable temperature controls.

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 16500 kg Pgsdpsx D Ifmjfx Af Iog Control Unit Brand SIEMENS This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information. Application Types Pressing / Laminating