Same explorer 80 buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Tractor Same EXPLORER 75

Wilp , NetherlandsNetherlands dealership location
6302 km
2016
used
Front axle: Tyre size: 7.50 x 18 Trelleborg Rear axle: Tyre size: 420/70 x 30 BKT Transmission: 12 gears Field of application: Agriculture Power: 55 kW (75 HP) Fls8nvwws EPA marked more
1

MACHINING CENTER - CNC (HORIZONTAL) MORI SEIKI SH-8000

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: Bbuxjqlzqz Mori Seiki SH-8000 Horizontal Machining Center -- X-Axis travel: 51.2" (1,300 mm). -- Y-Axis travel: 47.2" (1,200 mm). -- Z-Axis travel: 43.3" (1,100 mm). -- Pallet surface to spindle center: 2 - 49.2". -- Table center to spindle gage plane: 7.9" - 51.2". -- Pallet size: 31.5" x 31.5" (800 mm x 800 mm). -- Number of pallets: 2. -- Pallet change time: 14 Sec. -- Max. workpiece swing diameter: 51.2" (1,300 mm). -- Max. load capacity: 4,400 L... more
6
Type of fuel: Electric Yu9ewyhl Height: 130 cm Fork length: 1.150 mm Battery: 180 Ah 24 V Year of manufacture 2018 Lift height: 21 cm [...] NEW battery 2PzS 180Ah, Refurbished lifting system, Forksize 1150 x 550 mm, 220V charger, Tyres: Vulkollan more
2
x-travel 880 mm y-travel 630 mm z-travel 630 mm control HEIDENHAIN MILLPlus IT V tool change unit 32-fach tool taper SK 40 spindle turning speed range 12.000 U/min b-axis Schwenkkopf 0,001 ° c-axis 0-360° Rundtisch 0,001° coolant ja, 40 bar IKZ rotary table dia. 700 mm DECKEL MAHO GILDEMEISTER DMU 80T MONOBLOCK Compact 5-axis machining center with large travel distances. 12,000 spindle And ICZ. Machine is currently completely overhauled. The overhaul includes: - complete disassembly and... more
5

Vertical Turret Lathe - Single Column DÖRRIES SDE 280/V5

Mönchengladbach, GermanyGermany dealership location
6371 km
1976
used
faceplate diameter:2800 mm 02p977u3d swing diameter:6000 mm turning height:2500 mm faceplate turning speed range:2,12 - 112 U/min max. ram stroke:1000 mm max. workpiece weight:60.000 kg feeds:0,71 - 128 mm/min rapid traverse:2 m/min total power requirement:65 kW weight of the machine ca.:55 t dimensions of the machine ca.: m DRO Heidenhain more
1
Elect./Voltage: 230/400 V, 50/60 Cy, 3 Ph. Bbuuspuoxv EMC EXPLORER 950 1K ... Wide Belt Sander with (1) Sanding Heads; Combination head roller/[...] medium duty machine, ideal for cabinet shops [...] is a demonstrator, only used for demos at machinery trade shows. Machine comes with full factory warranty and is not only available immediately, but has a great price tag too!Technical Data: -- Useful working width 950 mm (37"). -- Working thickness min./max. mm 3 - 170 (1/8" - 6-11/16"). --... more
6
Type of fuel: Electric Hjozczp Height: 130 cm Fork length: 1.150 mm Battery: 180 Ah 24 V Year of manufacture 2017 Lift height: 21 cm [...] NEW battery 2PzS 180Ah 2017! 220V charger, Forksize 1150 x 550 mm, Refurbished lifting system, Tyres: Vulkollan more


same explo...
daily

New machines via email!

Stay updated!
6

Injection Moulding Machine Windsor HIS 800 D

Kaiserslautern, GermanyGermany
6535 km
1979
excellent (used)
OVERVIEW: Brand: Windsor Model: HIS 800 D Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1979 Bczafz9r3c Production hours: 65000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 11000 mm Measurements depth: 3000 mm Measurements height: 3000 mm Machine weight: 14000 kg INJECTION UNIT: Stroke volume: 1100 cm³ Injection pressure: 1500 bar Screw diameter: 110 mm CLAMPI... more
5
x-travel 1200 mm y-travel 1000 mm z-travel 1000 mm U-axis +/- 25 mm b-axis +/- 150 ° A-Axis (0,0001°) - 360 ° spindle taper ISO 50 spindle turning speed range 2 - 3500 U/min spindle motor 35 kW size of pallet dia 600 mm table load 500 kg no. of tools in the magazine 162 Stück control SIEMENS 840D workpiece dia. 1200 mm Rapid Travel X / Y / Z-Achse 50 / 50 / 35 m/min total power requirement 120 kVA weight of the machine ca. 22 t dimensions of the machine ca. - m 5-axis / side machining - tur... more
3

Bar feeder Hydrafeed Multifeed 3-80

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
1999
good (used)
Short with magazine rod feeder. capacity and type of rods: L2yxvrk round rods 3-80 mm. Length of rods (depending) 1325 mm. Height of lathe centre line 700-1500 mm. more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Bbuyzgh7vz STAR V MACHINERY SC-800 CROSS V-GROOVER: -- Specifications: 1-Spindle with: 7.5 HP - 3,600 RPM Motor, 30" max. crosscut cap., material thickness 1/4" - 1".Head up & down movement via pneumatic cylinder with linear rail & linear bearings; depth fine adjustment with special threaded adjustable unit. -- Positioning:Carriage cross-travel powered by 3 HP hydraulic motor (4 GPM), driven ball screw with linear rail & linear bearings; feed rate from ... more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Bl0alkla Battery: 180 Ah 24 V Year of manufacture 2018 Lift height: 21 cm [...] NEW battery 2PzS 180Ah, 220V charger, Refurbished lifting system, Forksize 1150 x 550 mm, Tyres: Vulkollan more
5

Machining Center - Universal DMG DMC 80 U hi-dyn

Mönchengladbach, GermanyGermany dealership location
6371 km
2002
used
x-travel:800 mm y-travel:700 mm z-travel:600 mm b-axis:+110/-90 ° c-axis:360.000 x 0,001 Grad pallet size::800 x 630 mm Bcm8z7bus9 workpiece weight:800 kg spindle taper:HSK 63 number of spindle speeds:18000 U/min spindle motor:12 kW no. of tools in the magazine:120 Stück table turning speeds:13,6 U/min weight of the machine ca.:10,5 t total power requirement:59 kVA dimensions of the machine ca.:8,1 x 6,2 x 3,2 m 5-axis machining center with SIEMENS 840 D CNC control - NC rotary table B-axis ... more
1

Machine pallet Mazak FH 880

More Mazak Fh 880
Zevenbergen, NetherlandsNetherlands dealership location
6233 km
good (used)
Used machinepallet for a Mazak FH 880. Uaz3coug more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bbu2pt37g2 Doosan Z280-TM Twin Turret, Sub Spindle, Live Tool CNC Lathe -- Max turning diameter 11". -- Max turning length 8.66". -- XR / XL travels 8.66" / 8.66". -- ZR / ZL travels 32.87" / 10.83". -- B-Axis travels 31.69". -- Spindle nose distance 43.5". -- Spindle speed main / sub / milling 4,000 RPM / 4,000 RPM / 3,000 RPM. -- Spindle bar capacity main / sub 2" / 1.54". -- Spindle nose main / sub A2-6. -- Spindle motor main / sub / millin... more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Battery: 180 Ah 24 V Year of manufacture 2017 Bmr2jmnq Lift height: 21 cm [...] NEW battery 2PzS 180Ah, 220V charger, Refurbished lifting system, Forksize 1150 x 550 mm, Tyres: Vulkollan more
5

Machining Center - Vertical DMG DMU-80T

Mönchengladbach, GermanyGermany dealership location
6371 km
1996
used
x-travel:800 mm y-travel:650 mm z-travel:550 mm quill stroke:90 mm spindle taper ISO:40 swivelling of milling head:+/- 60° Grad table surface area:1100 x 600 mm spindle turning speed range:1 - 6300 U/min feed speeds:1 - 10000 mm/min Mtr3n rapid traverse:15 m/min workpiece weight:600 kg total power requirement:22 kW weight of the machine ca.:6 t dimensions of the machine ca.:5,5 x 3,5 x 3,1 m CNC control Mill Plus automatic toolchanger 25-stations chip conveyor and coolant attachment oil mist ... more
5

Center Lathe ANSELMI Mono 180 EA

Dreieich, GermanyGermany dealership location
6568 km
used
turning diameter over bed 410 mm turning diameter over slide rest 210 mm turning length 1000 mm center height over bed 205 mm centre distance 1000 mm bed width 270 mm digital readout 3-Achsen SINO spindle bore 40 mm turning speed range 36 - 1800 U/min 3-jaw-chuck diameter 200 mm quick change toolholder RABE Typ E taper in tailstock-quill MK 3 Cv87ageeq dia. of quill 50 mm quill stroke 190 mm voltage 380 V weight of the machine ca. 1,6 t dimensions of the machine ca. 2,20 x 0,80 x 1,50 m - [... more
1

Machine pallet Mazak FH 480

Zevenbergen, NetherlandsNetherlands dealership location
6233 km
good (used)
Used machinepallet for a Mazak FH 480. Waaec more
1
Elect./Voltage: 230 or 460 V, 60 Cy, 3 Ph Glx9are2m 1990 COLCHESTER 17-80 LATHESpecifications: -- Swing Over Bed 17 1/4" -- Swing Over cross slide 10 1/2" -- Cross Slide Travel 12 1/4" -- Bar Capacity thru Spindle 3" -- Center Distance 80" -- Spindle speed (16) 20-1600 RPM -- Tailstock Spindle Travel 7" -- Center 5 MTEquipped With: -- 12" 3 Jaw Chuck -- Steady Rest (9" capacity) -- Trav-a-dial -- CA Tool Post -- Main Motor 10 HP, 1800 RPM -- Cross feed dial with Direct Reading -... more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Battery: 24 V Year of manufacture 2018 Lift height: 21 cm [...] Forksize 1150 x 550 mm, Refurbished lifting system, 220V charger, Tyres: Vulkollan Yu3fk99b more
4
sheet width 2000 mm plate thickness 2 mm pre-bending 4 mm Onttjqh7 roll diameter 80 mm Drive 1,5 kW weight of the machine ca. 670 kg dimensions of the machine ca. 3 x 0,9 x 1,2 m Condition: ready for operation Electric 380 Volt Foot switch Asymetric roller arrangement, rear roll adjustment and lower roll adjustment over handwheel, elektr. safety control, upper roller forward swing-out. The sheet thickness refers to a strength of 400 N. Machine dealer with own stock of 2500 m² and cert... more
3

Kitchen Sink Strohauer SP 1800

Babenhausen, GermanyGermany dealership location
6588 km
2015
good (used)
Doppelspueltisch kitchen sink 2x basin left with drip tray right Dimensions: 1800 x 700 x 850 mm, WxDxH Qputdfmp very good condition! more
1
Elect./Voltage: C7crxvq0 MAZAK 24 x 80 ENGINE LATHE --swing 24" --swing over cross slide 14 1/2" --centers 80" --spindle speed 12 - 2000 [...] --Hole thru 4.06"Equipped with : --20' 4 jaw chuck --aloris tool post --taper attachment --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out more
6
Type of fuel: Electric Height: 130 cm Fork length: 1.150 mm Ghi7mev2m Battery: 180 Ah 24 V Year of manufacture 2018 Lift height: 21 cm [...] NEW battery 2PzS 180Ah, 220V charger, Refurbished lifting system, Forksize 1150 x 550 mm, Tyres: Vulkollan more
7
wire diameter range: 1,8 - 3,8 mm mesh width: 20 - 80 mm working width: 800 - 2.000 mm Bcy7ya3vp7 output: up to 180 m²/hour more
6
Table size 800 x 800 mm. Table NCRT. Number of pallets 14. Movement x-Axis 1300 mm. y-Axis 1100 mm. z-Axis 1000 mm. Table indexing 0,001°. Number of tools in magazine 237 pieces. Maximum spindle speed 35-7.000 min. Tool taper DIN 69871A-50. CNC control M-plus Ub0lvvqt more
2

Inox Worktable Koehler AT 1800x700

Babenhausen, GermanyGermany dealership location
6588 km
2017
good condition (used)
Fdlvi89ze Stainless steel worktable new exhibit! with stainless steel worktop stainless steel frame Shelf below Dimensions: 1900 x 800 x 850 mm, WxDxH more
1
Elect./Voltage: C3tu33hi O-M OMEGA 80 CNC Ram Type VTL -- Table diameter 1600 mm( 67.5") -- Maximum swing diameter 2000mm ( 78.87") -- Maximum turning diameter 2000mm (78.87") -- Maximum turning height 1600mm ( 62.9") -- Maximum work-piece weight 10,000 Kg. (22,000 Lbs) -- Vertical travel of ram (Z-Axis) 900mm (35.43) -- Ram size 210mm (8-1/4" - 8-1/4") -- Horizontal travel to right of table center 1770mm (69.68") -- Horizontal travel left of table center 900mm (35.43") -... more
4

Center Lathe PADOVANI Labor 180 S

Dreieich, GermanyGermany dealership location
6568 km
1985
used
turning diameter over bed 360 mm turning diameter over slide rest 205 mm turning length 1000 mm center height over bed 180 mm turning diameter in the gap 580 x 240 mm centre distance 1000 mm bed width 250 mm spindle bore 51 mm turning speed range 46 - 1750 U/min power requirement 3,0 kW quick change toolholder MULTIFIX Typ B taper in tailstock-quill MK 4 dia. of quill 52 mm quill stroke 170 mm coolant voltage 400 V total power requirement 3,5 kW weight of the machine ca. 1,4 t dimensions of t... more
6

Injection Moulding Machine SANDRETTO 2054-380

Kaiserslautern, GermanyGermany
6535 km
1998
excellent (used)
OVERVIEW: Brand: SANDRETTO Model: 2054-380 Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: 01/09/2018 Construction year: 1998 Production hours: 100000 Location: Spain Origin country: Italy GENERAL DATA: Measurements width: 8810 mm Measurements depth: 2420 mm Measurements height: 1850 mm Machine weight: 16000 kg CONTOL UNIT: Brand: SEF Model: 100 INJECTION UNIT: Stroke volume: 1370 cm³ Injection pressure: 1500 bar Screw diam... more
4

CNC cycle lathe Microcut BNC - 2480 X

Altriperstrasse 31, 68199 Mannheim, DEGermany
6584 km
1999
good (used)
CNC lathe Saeilo cycle lathe dialog 610 / 2000 Buffalo machinery manufacturer, Taichung Taiwan type: BNC-2480 X Fagor 8050 TC control, weight 3.7 tonnes Tip height 305 mm, Centre distance 2000 mm turning diameter in the bridge D860,. Bbdr9qecft Spindle bore 83, engine 15 kW, 4 gear stages, with 3 - jaw Chuck D250, with Bezel to D250, 4 hand switch revolver FA. Thumper. Turning diameter over slide 360 mm The sale is carried out only to entrepreneurs in the sense of § 14 BGB No sales to ... more
1
Elect./Voltage: 7di8ffe2 MAZAK 24 x 80 ENGINE LATHE --swing 24" --swing over cross slide 14 1/2" --centers 80" --spindle speed 12 - 2000 [...] --Hole thru 4.06"equipped with : --20' 4 jaw chuck --aloris tool post --tailstock --flood coolant --steady rest --Chuck Guard --Chip bucket --Newall Digital read out more
3

turning roll for 800t load Sartore PR 8000

Am Webersfeld 8, 57223 Kreuztal, DEGermany
6482 km
2017
as good as new (ex-display)
turning roll for 800t load diamterrange: 1.500-9.000mm turning speed: 60-1.200 mm/min Nbrzh wheel dimensions: 1.000 x 300 mm availible for renting more
6

High speed press KAISER V 63 W / 1080

Gammertingen, GermanyGermany dealership location
6689 km
1985
used
Pressure: 63 ton Ram stroke adjustable: 10 - 80 mm Ram adjustment: 80 mm Shut height (stroke down, adjustment up): 380 mm Table surface area : 1.030 x 550 mm Ram surface area: 850 x 460 mm Number of strokes: 65 - 400 [...] Weight of machine approx.: 9,5 ton Bbpdgbiyyo more
3

AUFSPANNTISCH DECKEL MAHO AST 800

Bruchsal-Büchenau, GermanyGermany
6601 km
2000
excellent (used)
AUFSPANNTISCH DECKEL MAHO AST 800 - Bcyosrriza 27-04-009 Lieferzeit: sofort Nummer: 27-04-009 Hersteller: Deckel Maho Typ: AST 800 MASCHINENDATEN Baujahr: ca. 2000 L x B x H: ca. 800 x 800 x 300 mm Gewicht: ca. 500 kg Sehr Guter Allgemeinzustand passend u.a. zu: Bettfräsmaschine, Tischbohrwerk & Bearbeitungszentren TECHNISCHE DATEN Tischaufspannfläche: ca. Ø 800 mm Aufspannfläche: ca. Ø 650 mm Tischhöhe: ca. 300 mm Anzahl der T - Nuten: 11 Stück Größe der T ... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bzud0dz GABBIANI Class/PCT 3800 Rear Load Panel Saw: Capacity & Specifications: 149" (3,800 mm) Overall cutting length, 3-7/8" (100 mm) max. cutting height; 21.5 HP main motor, 3.6 HP scoring motor, 15-3/4" dia. - 4,500 RPM main & 6-1/4" dia. - 7,200 RPM scoring blade, w/pneumatic saw blade "quick change" system. -- Saw carriage travel speed from 0 - 360 FPM, 360 FPM constant return; powered by SIEMENS AC brushless motor. -- Back fence with (6) material ... more


same explo...
daily

New machines via email!

Stay updated!

to

to

Edit search
SAME EXPLORER 80
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close